Migrating myself datasource
Hi,
Is it true that we cannot migrate datasources of myself BW system (generated, export datasources) to RSDS type?
I know that new RSDS format is not possible for external datasources like Informatica and DB Connect but is it also true for BW myself datasources?
I am getting this error "Export datasource 80PROFIT_CTR(DBWCLNT001) in myself system: Object type RSDS not possible".
I tried both with export and w/o export.
Please help
Thanks
Hi,
I dont think so. You may get this error because first you need to convert the base object's dataflow to 7.0 dataflow. In your case convert the 0PROFIT_CTR's dataflow to 7.0 dataflow and then try the 80PROFIT_CTR.
Bye
Dinesh
Similar Messages
-
Migrating myself system datasource
Hi,
Is it true that we cannot migrate datasources of myself BW system (generated, export datasources) to RSDS type?
I know that new RSDS format is not possible for external datasources like Informatica and DB Connect but is it also true for BW myself datasources?
I am getting this error "Export datasource 80PROFIT_CTR(DBWCLNT001) in myself system: Object type RSDS not possible".
I tried both with export and w/o export.
Please help
ThanksExample -
Updating data from ODS to Cube
Right click on Data store object-> create transformation ->give the target cube name->give the load option either full or delta-> activate the transformation and load data from ods to cube by clicking execute in third tab
DTP required between DSO and Infocube to handle DELTAS.
Using Process Chains -
http://help.sap.com/saphelp_nw2004s/helpdata/en/ce/dc87c1d711f846b34e0e42ede5ebb7/content.htm
Hope it Helps
Chetan
@CP.. -
Error while migrating the datasource
Hi Guys,
We are using BI 7.0 SP 13 and when we try to migrate a datasource that has been replicated from ECC we encounter an error message as follows
error Message No. RSO404 says "Error when activating Datasource".
Has anyone encountered this issue while activation?
Help is appreciated.
donivHi,
where you are getting error in ECC?. or in BW?. If it is already in use, then you need to clear all Queues and then try to activate it.
Thanks
Reddy -
How to create a MYSELF Datasource
Hello,
can any body help me creating a MYSELF Datasource from which i can create a InfoCube ..
My requirement is
I want to partition my InfoCube for which i want to transfer all my data that is in my present Cube to another dummy InfoCube. So that i can make partition to my InfoCube..
Thanks
NoorHi Noor,
The steps to copy the data from One cube to another cube which has the same structure is described in the below link:
https://www.sdn.sap.com/sdn/collaboration.sdn?node=linkFnode6-1&contenttype=url&content=https://Re: Copying the structure of an Infocube
Hope this helps.
Bye
Dinesh -
hello everyone,
after replicating the data source wen im trying to migrate the datasource from 3.5 to 7 a pop up window opens which says with or without export?
wat does it mean?
thanx in advancewith export - you can recover ur 7.0 datasource back to 3.x one
W/o export - you cant -
How to migrate hierarchy datasources?
hi friends
im in the process of migrating the datasources from 3.5 to 7.0 .
i have migrated 0profit_ctr_attr and 0profit_ctr_text and i need to migrate 0profit_ctr_0106_hier.. i right clicked on it and i didnt find migrate option....
can any one plz give me a sol for migrating the hierarchy datasources..
Thanx in adv
raviAs of now you cannot migrate hierarchy datasources. You still have to stick to the older way of loading hierachies. TR/Infopackage..
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/682cacb88f297ee10000000a422035/content.htm -
DETAILS ABOUT MYSELF DATASOURCE
hi all,
could someone give me a overview of myself datasource.
why it was generated instead of creating a new data source.
is it a datamart scenario overall.
points will be awarded.
thanks a lot.
axelHi,
Myself datasource will comes into picture when ever u r updating the data within the system i.e say u r updating the data from one data target to other one within ur system. We can even call it as a data mart scenario.
(The BW system feesing data to itself is called as myself data mart. This is created automatically, it uses ALE for data transfer)
when ever u r generating the data marts at the first time then u have to replicate the generated datasources sources from the myself sources system.
Regards-
MM
Assign points if it helps -
Hi All,
I am working on BI7 and SRM standard content. I observe that the hierarchy DataSource are in 3.x version and the classic flow is not coming up after activation.
I have tried to migrate this DataSource to 7.x with the export option but am getting the below error.
" DataSource 0BBP_BIGURE_HIER(SRDCLNT200): Data type H not supported by object type RSDS "
If some one has had this problem below Please help in the resolution.
Kind Regards
NirenHi,
We are currently working on BI content 7.0. After transfering we got the 3.5 flow for most of it. Now we are looking for a migration of 3.x flow to 7.x flow. It would be really helpfull If any of you could answer my following queries:
1. How do we migrate queries/workbooks?
2. How much of effort it would be to migrate transformations having routines in it as part of stsandard content . And is it just a copy paste of the ABAP routines or do we need to change it to an Object oriented ABAP?
3. We are having around 100 info providers and 300 master objects. Will it be ok if we come up with a stratergy of migrating the info providers alone and still having 3.x flow for the master info objects.
Thanks and Regards
Niren. -
Migration of Datasource with routine's
Dear All,
I am in the process of migrating 3.x DataSource to 7.0 and am following the step by step process as suggested.
In doing so transformations are created and proposals are generated where ono-to-one mapping between field and InfoObject are in place.
In case of InfoObject which are populated by routines are not mapped.
For example: for DataSource 2LIS_02_SCL routines are created and mapped for 0Order_val, 0PO_QTY,0TAR_DL_QTY to name a few in the update rules.
My question is how to migrate the routines along with the DataSource for all transformations requiring routines.
or
Is there any other method to migrate the routines
or
Is activating transformation an option?
All suggestions, links, articles, blogs are welcome.
Yours Truly,
K SenguptoHi Obaid
I Migrate my data source in Business Content in 3.x and I have my update rule and transfer rule for all ds of purchasing data.
I created a custom cube from 0PUR_C04, I want to enhance the data source 2LIS_02_HDR,
Step by step procedure for creating custom cube ZPUR_C04
1- Select the Cube Standard 0PUR_C04 , Copy
2- Default info cube with name ZPUR_C04
3- Select my new infocube ZPUR_C0
4- Create update rule for the data source 2LIS_02_SCL , 2LIS_02_HDR and 2LIS_02_ITM
With this approach I cant have the update rules routine like standard flow ?
For example 2LIS_02_HDR :
No. of Purch. Orders <-- mm_no_of_po
Number of requests for quotations <-- mm_no_of_rfq
Number of contracts <-- mm_no_of_co
How can do this mapping ? or how can I copy the transformation from standard cube to my custom cube ?
Thanks & Best Reagrds
ILyaebi -
How to migrate the datasource from Bea 8.1 to Bea 10
Hi,
I have to migrate an application from bea 8.1 to 10.
the configuration in 8.1 is as follow : (config.xml)
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="10" KeepXAConnTillTxComplete="true"
MaxCapacity="150" Name="adiosPool" Password="adios47"
Properties="user=adios47"
RemoveInfectedConnectionsEnabled="false"
ShrinkFrequencySeconds="600" StatementCacheSize="100"
SupportsLocalTransaction="false" Targets="server"
TestConnectionsOnCreate="false" TestConnectionsOnReserve="true"
TestFrequencySeconds="60" TestTableName="SQL SELECT 1 FROM DUAL" URL="jdbc:oracle:thin:@AXHE0.application.hvb.de:1521:AXHE0"/>
<JDBCTxDataSource JNDIName="weblogic.jdbc.jts.adiosPool"
Name="adiosPool" PoolName="adiosPool" Targets="server"/>
and that is my new configuration : (config.xml)
<jdbc-system-resource>
<name>adiosPool</name>
<descriptor-file-name>jdbc/adiosPool-0758-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
jdbc/adiosPool-0758-jdbc.xml :
<?xml version='1.0' encoding='UTF-8'?>
<jdbc-data-source xmlns="http://www.bea.com/ns/weblogic/90" xmlns:sec="http://www.bea.com/ns/weblogic/90/security" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wls="http://www.bea.com/ns/weblogic/90/security/wls" xsi:schemaLocation="http://www.bea.com/ns/weblogic/920 http://www.bea.com/ns/weblogic/920.xsd">
<name>adiosPool</name>
<jdbc-driver-params>
<url>jdbc:oracle:thin:@AXHE0.application.hvb.de:1521:AXHE0</url>
<driver-name>oracle.jdbc.OracleDriver</driver-name>
<properties>
<property>
<name>user</name>
<value>adios47</value>
</property>
<property>
<name>portNumber</name>
<value>1521</value>
</property>
<property>
<name>SID</name>
<value>HVAEE0</value>
</property>
<property>
<name>serverName</name>
<value>AXHE0.application.hvb.de</value>
</property>
</properties>
<password-encrypted>{3DES}PMWtUXqoHT8=</password-encrypted>
</jdbc-driver-params>
<jdbc-connection-pool-params>
<test-table-name>SQL SELECT 1 FROM DUAL</test-table-name>
</jdbc-connection-pool-params>
<jdbc-data-source-params>
<jndi-name>weblogic.jdbc.jts.adiosPool</jndi-name>
<global-transactions-protocol>TwoPhaseCommit</global-transactions-protocol>
</jdbc-data-source-params>
</jdbc-data-source>
but when I start the server I get the following exception :
START SERVER
javax.naming.NameNotFoundException: While trying to lookup 'weblogic.jdbc.jts.adiosPool' didn't find subcontext 'jdbc'. Resolved 'weblogic'; remaining name
'jdbc/jts/adiosPool'
at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1138)
at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:246)
at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:171)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:205)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:213)
at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:367)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
what's wrong ?
Thanks for your ideasHi,
This is realated to Upgrading your domain.You can upgrade your domain from bea weblogic8.1SP4 to Bea weblogic 10.You need to use the upgrade tool from bea weblogic platform10.You can start the Upgrade wizard tool from Windows Start->All Programs->BEA Products->Tools->DomianUpgradeWizard.The tool will take you to upgrade the domain automatically.Once you have upgraded the domian everything(database connection pools,users,groups,any other resources) in 8.1 domian will be changed to 10.
Bea Support Complete upgradation of Application as well as application data from 8.1 to 9.2 or 10.0
Thanks
Bishnu
Regards
Bishnu -
Migration of datasource from BW 3.5 which is already present in BI validati
Hi,
we are migration objects from 3.5 to 7.0,some DSs are already migrated in BI7.0.So i need help in validating these Data sources in 3.5 and 7.0 and if they are not matching i want to migrated again,
so help me various valdiations that could be performed.
Thanks,
AKONHi,
SD Tables:
http://www.erpgenie.com/abap/tables_sd.htm
SD Data Sources:
Document Header: 2LIS_11_VAHDR
Document Item: 2LIS_11_VAITM
Document Condition: 2LIS_11_VAKON
Document Schedule Line: 2LIS_11_VASCL
Document Item Allocation: 2LIS_11_V_ITM
Allocation Schedule Line: 2LIS_11_SCL
Order Delivery: 2LIS_11_SSL
MM Tables:
http://www.erpgenie.com/sap/abap/tables_mm.htm
MM Data Sources:
Goods Movements: 2LIS_03_BF
Stock Revaulations: 2LIS_03_UM
Refer the below links,
http://help.sap.com/saphelp_nw70/helpdata/en/44/a8feb3f3692999e10000000a1553f6/content.htm
http://help.sap.com/saphelp_nwce10/helpdata/en/d1/fa55c9fb9f4f80b908c5bf9d014d00/content.htm
Hope it helps you,
Regards,
Ravindra. -
How to Migrate 3X datasource to 7X datasource
Hi,
Can any one please update on steps involved in Migration of 3X Data source to 7X data source
ThanksHi,
Please have a look into below article, it provides the steps for migration of dataflow including datasoure.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00d94ca8-9538-2c10-9b99-859afde1fa4a?quicklink=index&overridelayout=true
Thank-You.
Regards,
Vinod -
Problem during dataloads from myself datasources
Hi folks,
I'm facing the problem that after a hardware crash and subsequent reboot no dataloads from the myself system are working anymore.I'm getting very strange error messages like I posted hereafter. I have not got a clue what to do. I performed already a restore on the source system and ran "activate_all_transfer_Structure" but in vain. Anybody any idea?
THanks+Regards, Thomas
Error in ABAP application program.
The current ABAP program "SAPLSPIAGENTRFC" had to be terminated because one of
the
statements could not be executed.
This is probably due to an error in the ABAP program.
Function module "SPI_LS_STAT_START" was called
with the parameter "IP_AGENTID".
This parameter is not defined.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class
'CX_SY_DYN_CALL_PARAM_NOT_FOUND', was neither
caught nor passed along using a RAISING clause, in the procedure
"SPI_AGENT_TRFC_RUN_CONFIRMED" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
Function module "SPI_LS_STAT_START" was called
with the parameter "IP_AGENTID".
This parameter is not defined.
000350 * ******************************************************************
000360 * * start messure monitoring performnace
000370 * ******************************************************************
> CALL FUNCTION 'SPI_LS_STAT_START'
000390 EXPORTING
000400 ip_agentid = spitr_cp_agent_run_confirmed.
000410 * ******************************************************************
000420 * * check configuration
000430 * ******************************************************************
000440 CALL FUNCTION 'SPI_GET_AGENT_RT_CONFIG'
000450 EXPORTING
000460 ip_agentid = spitr_cp_agent_run_confirmed
000470 IMPORTING
000480 et_config = lt_config.Hello Thomas,
Check the connection of My Self System. May be that was disturbed. also check the connections of BI system with the other sourcesystems available. I am sure that you can solve the problem one by one taking your basis consultant job.
All the best.
Regards
R Karthik K -
Error while activating the datasource during migration
Hi Guys,
When we were trying to migrate the datasources from 3.x to BI 7.0, we are encountering an error with the activation of the datasource. The datasource itself has been migrated but the ativation log gives and error
Error in activating the datasourc----RSO404
Has anyone encountered this issue? Your input is highly appreciated.
Regards,
DonivVoodi,
Thanks for the response but the note talks about deletion of the DTP causing the errors. Moreover we are already on SP 13. Any other ideas?
Doniv -
Change a migrated DataSource for DB Connect Source System
Hi,
I have created a DataSource for a DB connect Source system with transactioncode RSDBC as follows:
1. select database TableView
2. choose Edit DataSource
3. fill in the field Application Component (default stated NODESNOTCONNECTED)
4. generate datasource
Result: the datasource has been created in the right application component. As I want to migrate to BW 7 I have migrated the datasource (with export) and afterwards activated it. Now we need to add more fields to the database TableView. After the fields have been added I want to make these fields also available in the DataSource created before.
How can I do this ?
When using transaction code RSDBC I found out that the application component is stated again NODESNOTCONNECTED instead of the application component filled before. Is it possible that changes in the TableView will always lead to create the DataSource all over again (new InfoPackage, new Transformation rules, new DTP).
Thank you in advance for your help. Kind regards, MinouschkaHello,
We have basically the same problem. An existing data source from a DB-connect client and now need to add a new field but edit mode BW does not provide the ability to add or delete existing fields.
Were you able to complete this and if so how did you do it?
Thank you,
Rick
Maybe you are looking for
-
Cisco WRV210 vpn troubles + firmware mismatch?
Have a customer with 3xWRV210 routers VPN'd in a hub & spoke design. We are frequently having issues with the vpn where they seems to stall -- the VPN Summary screen says 'C'onnected, but data will not pass over the tunnel. The solution is to restart
-
I am trying do a sanity check before I order some hardware. What I want to do is acquire from multiple channels in a SCXI chasis and as part of the same acquisition, also read from one of the "un-used" AI channels of the MIO card. My concern is this:
-
My ipad 2 up button is stuck can i send back to apple store warranty?? And How Can I Check My ipad Is not Underwarranty ?? Thank you~
-
VARRAY as in put param in procedure
When I create a procedure to test VARRAY input param create or replace procedure test_arr as type va_roles is varray(10) of varchar2(24); role1 va_roles := va_roles('a','s','f'); begin user_mgmt.change_role(role1); dbms_output.put_line('Count ' ||rol
-
This is an odd problem. I copied movie files to my Macbook and imported them into imovie. After I finished editing, I can delete both the imovie project and the actual movie file. Even if I empty the trash, the HD provides an incorrect size estimate