Migrating myself system datasource

Hi,
Is it true that we cannot migrate datasources of myself BW system (generated, export datasources) to RSDS type?
I know that new RSDS format is not possible for external datasources like Informatica and DB Connect but is it also true for BW myself datasources?
I am getting this error "Export datasource 80PROFIT_CTR(DBWCLNT001) in myself system: Object type RSDS not possible".
I tried both with export and w/o export.
Please help
Thanks

Example -
Updating data from ODS to Cube
Right click on Data store object-> create transformation ->give the target cube name->give the load option either full or delta-> activate the transformation and load data from ods to cube by clicking execute in third tab
DTP required between DSO and Infocube to handle DELTAS.
Using Process Chains -
http://help.sap.com/saphelp_nw2004s/helpdata/en/ce/dc87c1d711f846b34e0e42ede5ebb7/content.htm
Hope it Helps
Chetan
@CP..

Similar Messages

Migrating myself datasource

Hi,
Is it true that we cannot migrate datasources of myself BW system (generated, export datasources) to RSDS type?
I know that new RSDS format is not possible for external datasources like Informatica and DB Connect but is it also true for BW myself datasources?
I am getting this error "Export datasource 80PROFIT_CTR(DBWCLNT001) in myself system: Object type RSDS not possible".
I tried both with export and w/o export.
Please help
Thanks

Hi,
I dont think so. You may get this error because first you need to convert the base object's dataflow to 7.0 dataflow. In your case convert the 0PROFIT_CTR's dataflow to 7.0 dataflow and then try the 80PROFIT_CTR.
Bye
Dinesh

BI Admin Cockpit - only for myself system(BI)...?

Dear Gurus,
We are implementing BI admin cockpit in our BI system.
        u2022 When we are installing BI content two datasources, transformations, Info Packages has been installed for every cube -one for myself system(BI) and another one is for ECC source system.
u2022     As per the SAP Note 934848 it clearly tells it is for only myself system, then why SAP provides standard datasources for ECC system.
Please let us know whether we have to load data for only myself system OR for both the system I have to load data?
Regards,
Kiran A
Edited by: Kiran A on May 19, 2010 10:13 AM

Dear Mrityunjay,
We are unable to find the job in SM37 in ECC system.
Please let us know whether we have to load data from ECC for the bellow mentioned infocubes are not?
0TCT_C23     InfoPackage Statistics
0TCT_C22     DTP Statistics
0TCT_C21     Process Statistics
0TCT_C03     Data Manager Statistics (Details)
0TCT_C02     Front-End and OLAP Statistics (Details)
0TCT_C01     Front-End and OLAP Statistics (Aggregated)
Thanks for your support and co-operation.
Regards,
Kiran A

How to Create Myself System?

Hi,
We are using BW 3.5 system and have an infosource that loads its data from itself. So we need to establish Myself Source System.
But in rsa1 trx, our source system is set as a Datamart, which is supposed to be "Myself System".
How do we change our source system from datamart to myself system? Or is there any way to create new myself system?
Kindly suggest.
Regards,
Chintan

hi CS,
A BW system can be used as a source system to supply data to the same system or to another BW system.
When it is used as a source system to supply data to itself it is known as myself source system. All the data sources are available in datamart application component.
MYSELF is a special source system and you do not have to create it. Choosing a BW type source system (Create Source system option) will allow you to connect another BW system as source.
When you create datasource based on current source system (for example XML datasource or export datasource) it automatically mentions MYSELF source system.
The name of myself source system is the logical system name that your client has been assigned (in SCC4).
for more details, search SDN
with hopes
ARS

Migration of emulated datasource from 3.5 to BI 7

Hi Experts,
    For a requirement I want to migrate a emulated datasource 0material_attr   to bi 7.Previously some one already developed complete dataflow in 3.x, now i need to migrate every thing in bi 7.In order to make sure do i need to follow any sequence for this migration ( means first transferrule and then updaterule and then datasource) or I can directly migrate datasouce in BI 7 and then create transformation.Please any body suggest me.
Thanks & Regards
Vinod Kumar

Hi,
1.     Migrate all UpdateRules
Select the UpdateRule and press the right mouse button to get the context menu.
Choose u201CAdditional Functionsu201D and select u201CCreate Transformationu201D.
The UpdateRule is based on a 3.x InfoSource. The Transformation has to be created on a InfoSource (called u201CNew InfoSourceu201D ). A pop-up will ask you if you want to create a new InfoSource as a copy of the existing 3.x InfoSource. We need to have the new InfoSource, therefore choose u201CCopy InfoSource 3.x to New InfoSourceu201D and press enter.
2.     Migrate all TransferRules, for each relevant Source System Release
The migration of TransferRules is almost the same as the migration of UpdateRules. The main difference is, that you should not create a new InfoSource during the migration process. You have created the InfoSource already in the first step during the migration of the UpdateRule. Reuse the already existing InfoSource. Otherwise the link to the Transformation created before is missing.
Please have in mind that a transformation is source system dependent. Therefore the shadow table logic is the same as already known for the TransferRules. Be aware that you have to build a transformation pointing to a DataSource for each source system release which is needed (Basis release e.g. 620,640,700u2026) .
In order to perform the migration as described at the beginning of this chapter all TransferRules for the required SourceSystem relations must be active in the system.
3.     Migrate the DataSource. Make sure, that no TransferRule is still using the DataSource .
The migration of the DataSource is the last step which is needed to migrate the whole dataflow. Please make sure that not TransferRules pointing to this DataSource are still in use. How this can be done will be added later to the document.
TransferRules will be deleted when the DataSource is getting migrated. Choose the DataSource and select the Entry u201CMigrateu201D in the context menu.
4.     Test if everything is ok.
5.     Delete the UpdateRules and the 3.x InfoSource if the InfoSource in not used by still existing UpdateRules.
Best regards,
Frank

Upgrading/Migrating Portal System from EP 6.40 SP21 to EP 7.0 SP2

Upgrading/Migrating Portal System from EP 6.40 SP21 to EP 7.0 SP2
IN EP 6.40 we have ESS/MSS 60.2.2,KM,NWDI ,IN BAck end we have ECC 6.0 .
COuld you let me what are the list of measures/Prerequisites i need to take before going for upgrade .

Hi,
You can upgrade your portal with all usages that you have installed. You need to check upgrade guide as well.
You need to check if there is any custom development on the portal to migrate it to new version.
Thanks
Sunny

Change Myself system in RSA1 trx after client copy

Hi,
I have installed SCM 2007 system.
As post-processing step i have configured myself system in RSA1 trx in the 001 client.
Now, i want to perform client copy and use that new client 100 as Prod client. What are the steps required to change myself system to point to the new client?
Please help.
Regards,
Chintan

HI,
As logical systems are used to define you can use BDLS to convert them after client copy.
Go through :Note 325470,325525.
Thanks.

Myself system after System copy

Hello,
we have copied our PROD system(SLBWP200) to our DEV system(SLBWD200).
We have executed BDLS tx. After this, in RSA1 the old myself system (SLBWP200) have been renamed to SLBWD200, but the icon show the system as an R/3 system, not as myself system.
We have checked RSBASIDOC table and show this two entries:
SLBWD200 SLBWD200 ACT ZSBD039 000 BD 3 620 .....
SLBWD200 SLBWP200 ACT ZSAA002 000 AA M 620 ......
Any idea?
Regards. Angel.

Which selection did u make ? Client dependent or client independent conversion tables ?
Did you leave the Tables to be converted blank ?
Reactivate all partner agreements that carry the new logical system name after renaming.
Message was edited by: PSG

What is myself system?

Hi,
Can you please explain what is myself system?
Regards,
Lakshmi

Hi Lakshmi,
A BW system can be used as a source system to supply data to the same system or to another BW system.
When it is used as a source system to supply data to itself it is known as myself source system. All the data sources are available in datamart application component.
Hope it helps.
Thanks
Soumya

MySelf system

We have done a copy of one of our BI systems. After the copy we changed logical system name, and ran BDLS to reflect this.
But..now the MySelf system still points towards the system we copied from! The technical name has changed, but when I try to activate it I get the logon screen from the old system!
How can I change this?
-AD

Hi,
So chang it to new IP address. I hope, then on wards the things work properly with new system.
With rgds,
Anil Kumar Sharma .P

How to activate myself system

Hello:
I have a very basic question. We just installed our BW 3.5 and I am trying to learn how to create an infocube copy. I read that we need a data mart interface in the myself system to transfer data, but I can't find myself system on the source systems tree. Any help is appreciated.

Hi,
It is surprising to know that you donot have Self system as one of the source. Becasue system creates it automatically . So I hope, sombody might have deleted it. You better contact your Basis guy and ask him to create it. We can follow the same steps that we do in the creation of R/3 as source system .
With rgds,
Anil Kumar Sharma . P

Migrating a system disk from Ultra 10 to SB100

Hello all,
I have installed a Solaris 10 jumpstart server on an Ultra 10 machine.
Can I migrate the system disk to a SB100?
What steps should I do in order to recognize the disk, the internet interface and so on?
Thanks,

Did you get the page not found on the index/welcome page or other pages? Do you see any exception in the server log? Can you give us a little info on your app?
It would be great if you can attach your app, or simiple reproducer so we can help you.
thanks
Michael

Open Purchase order migration between systems

Hi Folks,
I have to migrate open purchase orders from 2 legacy systems into 1 new upgraded system. I do not want to change the PO number and therefore i have decided to set an external number range for all the Open POs.
Now my problem is in legacy system, there are open POs with different document types, in legacy system. Is it ok if I convert all open POs as a new custom document type in new system. let me know what problems could i face if i do this.
if not any other solution is most welcome
thanks n advance

Kartikey,
???? You are asking the wrong people. We couldn't possibly know for sure. It sounds to me like you are already designing the conversion process when you are not yet sure about the design of the solution.
During the sessions when you are interviewing the client, you must ask multiple questions about his business. For one, you need to discover the existing business requirements that caused the client to use multiple document types in legacy in the first place. This information only can come from your client.
Once you discover his reasons (or lack of reasons), you then have to determine in your 'To-be' solution if you still will need to satisfy that same business requirement. If you do, then you have to determine if the solution that you design will require multiple document types in SAP, or if you will instead utilize a different method to satisfy the requirement.
Good Luck & Best Regards,
DB49

Error occurred during operating system migration/Heteregenous system copy

Dear Gurus,
   We are performing a system copy
Source system: R/3 4.7 OS HP unix DB: Oracle
Target system : R/3 4.7 OS windows DB: Oracle
It throws an error while in phase of accessing a table which i have mentioned below and it's a show stopper for our delivery.Please suggest me regarding this issue.
bSl Trace: ORA-1403 when accessing table SAPUSER
Thanks
Raj

Dear Tushar,
   I got the exported file from the source system and now i am trying to import the exported file in target system using standard migration method.
   I strucked up in the database instance installation phase. I hereby attaching the detail of log files.
Thanks
Raj
E:\usr\sap\OPL\SYS\exe\run/R3load.exe: START OF LOG: 20090311211905
E:\usr\sap\OPL\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#18 $ SAP
E:\usr\sap\OPL\SYS\exe\run/R3load.exe: version R6.40/V1.4
Compiled Mar 22 2007 00:17:52
E:\usr\sap\OPL\SYS\exe\run/R3load.exe -ctf I K:\OPL_EXPORT_1\EXPORT/DATA/REGUC.STR C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\NUC\DB/DDLORA.TPL C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\NUC\DB/REGUC.TSK ORA -l C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\NUC\DB/REGUC.log
E:\usr\sap\OPL\SYS\exe\run/R3load.exe: job completed
E:\usr\sap\OPL\SYS\exe\run/R3load.exe: END OF LOG: 20090311211905
E:\usr\sap\OPL\SYS\exe\run/R3load.exe: START OF LOG: 20090311224420
E:\usr\sap\OPL\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#18 $ SAP
E:\usr\sap\OPL\SYS\exe\run/R3load.exe: version R6.40/V1.4
Compiled Mar 22 2007 00:17:52
E:\usr\sap\OPL\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\NUC\DB/REGUC.cmd -l C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\NUC\DB/REGUC.log -stop_on_error -k 1Wmgf5M50TH00eqtdaEw3QA1
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(GSI) INFO: dbname   = "OPL20090311080335                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "PHOCUROPL                                                       "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "PHOCUROPL"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 2"
(GSI) INFO: machine = "2x Intel 80686 (Mod 15 Step 8)"
(DB) INFO: REGUC created #20090311224420
(IMP) INFO: import of REGUC completed (0 rows) #20090311224420
(DB) INFO: REGUC~0 created #20090311224420
(DB) INFO: disconnected from DB
E:\usr\sap\OPL\SYS\exe\run/R3load.exe: job completed
E:\usr\sap\OPL\SYS\exe\run/R3load.exe: END OF LOG: 20090311224420
E:\usr\sap\OPL\SYS\exe\run/R3load.exe: START OF LOG: 20090311230021
E:\usr\sap\OPL\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#18 $ SAP
E:\usr\sap\OPL\SYS\exe\run/R3load.exe: version R6.40/V1.4
Compiled Mar 22 2007 00:17:52
E:\usr\sap\OPL\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\NUC\DB/REGUC.cmd -l C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\NUC\DB/REGUC.log -stop_on_error -k 1Wmgf5M50TH00eqtdaEw3QA1
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(GSI) INFO: dbname   = "OPL20090311080335                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "PHOCUROPL                                                       "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "PHOCUROPL"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 2"
(GSI) INFO: machine = "2x Intel 80686 (Mod 15 Step 8)"
(DB) INFO: disconnected from DB
E:\usr\sap\OPL\SYS\exe\run/R3load.exe: job completed
E:\usr\sap\OPL\SYS\exe\run/R3load.exe: END OF LOG: 20090311230021

BOXI3.1: Error during migration -The system cannot find the path specified

Hi,
I'm trying to migrate my reporting server from BOXIR2 to BOXI3.1.
I have a Java App which uses the SDK to generate reports hosted on BOE.
I have updated the SDK and when i attempt to generate a very simple test report, i get this error:
The system cannot find the path specified.
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: The system cannot find the path specified.
---- Error code:-2147467259 Error code name:failed
     at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
When i stepped through the codes, it occurred at this line:
ByteArrayInputStream aiStream = (ByteArrayInputStream)rptDoc.getPrintOutputController().export(exportOptions);
Does anyone know the cause of the issue? Some guide on what to check will also be helpful! Thanks!

Hi Aasavari,
We are running BOXI3.1 SP4.
For debugging purpose, I created a small program with your suggestion to remove exportOptions.
My report is called "testReportName" and it is created in "CMC > Folders > testFolderName":
IEnterpriseSession enterpriseSession;
IInfoStore infoStore;
IReportAppFactory rptAppFactory;
IInfoObjects oInfoObjects;
int reportFolderSI_ID;
String reportFolder = "testFolderName";
String reportName = "testReportName";
String paramVal = "2012-01-31";
try {
     enterpriseSession = CrystalEnterprise.getSessionMgr().logon(boUser, boPwd, boAPSName, boAuthType);
     //Get the InfoStore service from Crystal Enterprise
     infoStore = (IInfoStore)enterpriseSession.getService("InfoStore",com.crystaldecisions.enterprise.ocaframework.ServiceNames.OCA_I_IINFO_STORE);
} catch (SDKException e) {
     System.out.println(e.message());
try {
     //Get the Report Application Factory service from Crystal Enterprise
     rptAppFactory = (IReportAppFactory)enterpriseSession.getService("RASReportFactory");
     String parentFolderQuery = "SELECT * FROM CI_INFOOBJECTS WHERE " +
     "SI_PARENT_FOLDER=0 and SI_PROGID='CrystalEnterprise.Folder' and " +
     "SI_NAME= '"+reportFolder +"' ORDER BY SI_NAME";
     IInfoObjects parentFolderInfoObjects = infoStore.query(parentFolderQuery);
     reportFolderSI_ID = ((IInfoObject)parentFolderInfoObjects.get(0)).getID();
     // Retrieve the report by name and its reportFolder from Crystal Enterprise
     oInfoObjects = infoStore.query("Select * From CI_INFOOBJECTS Where SI_NAME='"+reportFolder+"' AND SI_PARENT_FOLDER="+reportFolderSI_ID);
     oInfoObjects = infoStore.query("Select * From CI_INFOOBJECTS Where SI_NAME='"+reportName+"' AND SI_PARENT_FOLDER='"+((IInfoObject)oInfoObjects.get(0)).getID()+"'");
     IInfoObject infoObject = (IInfoObject)oInfoObjects.get(0);
     //Open the report into a Report Document object
     ReportClientDocument rptDoc = rptAppFactory.openDocument(infoObject,0, Locale.ENGLISH);
     //Refresh tables
     IConnectionInfo connectionInfo;
     util.setJdbc_url(ap.getParameterString("URL"));
     util.setJdbc_driver(ap.getParameterString("driver"));
     util.setJdbc_user(ap.getParameterString("user"));
     util.setJdbc_pwd(ap.getParameterString("password"));
     util.setJdbc_database(ap.getParameterString("database"));
     connectionInfo = util.getJdbcConnectionInfo(util.getJdbcPropertyBag());
     int replaceParams = DBOptions._ignoreCurrentTableQualifiers + DBOptions._doNotVerifyDB;
     ConnectionInfos connectionInfos = rptDoc.getDatabaseController().getConnectionInfos(null);
     for (ConnectionInfo oldConnectionInfo:((Collection<ConnectionInfo>)connectionInfos))
          rptDoc.getDatabaseController().replaceConnection(oldConnectionInfo, connectionInfo, null, replaceParams);
     //Get Params
     Fields mainRptParameterFields = rptDoc.getDataDefController().getDataDefinition().getParameterFields();
     String params = new String();
     for(Object parameterField : mainRptParameterFields){
          String paramName = ((ParameterField)parameterField).getName();
          if(parameterField != null)
               if(((ParameterField)parameterField).getType() == FieldValueType.dateField)
                    rptDoc.getDataDefController().getParameterFieldController().setCurrentValue("", paramName,java.sql.Date.valueOf(paramVal));
               else if (((ParameterField)parameterField).getType() == FieldValueType.dateTimeField){
                    //Stored Procs uses Datetime
                    java.util.Date datetime = (Date)reportDate_df.parse(paramVal);
                    rptDoc.getDataDefController().getParameterFieldController().setCurrentValue("",paramName, datetime);
               else
                    rptDoc.getDataDefController().getParameterFieldController().setCurrentValue("", paramName, paramVal);
     ByteArrayInputStream aiStream = (ByteArrayInputStream)rptDoc.getPrintOutputController().export(ReportExportFormat.PDF);
     rptDoc.close();
I ran this against BOXIR2 and BOXI3.1, BOXI3.1 will still throw error at
ByteArrayInputStream aiStream = (ByteArrayInputStream)rptDoc.getPrintOutputController().export(ReportExportFormat.PDF);
Another question, will CI_INFOOBJECTS table be created in the DB during installation of BOXI?

Migrating myself system datasource

Similar Messages

Maybe you are looking for