Migrating OID service names
Hi all,
I am new to this OID.
We are currently using 9i OID and we are upgrading our infrastructure and moving all databases to 10g.
We use OID only for tnsnames resolution.
I have installed 10gR3 AS infrastructure for OID.
can someone please provide me instructions on how we move OID service name entries from one version to another.
i had a look at the oracle support [ID 251776.1] and it doesnt seems to be clear for a newbie like me.
Thanks
BS
In case if any one has been with the same problems
the easiest way to do is to install jxplorer and export as LDIF file and then remove unnecessary attributes and import
Similar Messages
-
I have setup LDAP multimaster Replication between two oid hosts : oid1 and oid2 . Service names are resolved from oid1 baut not from oid2 . Where can be a problem ? Replication between oid is working as expected .
When you mentioned:
"Service names are resolved from oid1 baut not from oid2 " . You mean you are doing for example ldapbind on oid1 is working and the same ldapbind on oid2 is not? If so, did you check if oid2 has different ports or if have for example one OVD against it to get these binds? Can you give me more details on this , so I ca try to help here?
thanks in advance,
Thiago Leoncio. -
OID not resloving service names after bouncing repository
I installed and configured OID(10g) and repository is oidtest on hpux 11.1.
1)Before shutting down the repository
C:\Oracle\ora92\network\ADMIN>tnsping dbtest1
TNS Ping Utility for 32-bit Windows: Version 9.2.0.1.0 - Production on 30-NOV-20
07 16:34:05
Copyright (c) 1997 Oracle Corporation. All rights reserved.
Used parameter files:
c:\oracle\ora92\network\admin\sqlnet.ora
Used LDAP adapter to resolve the alias
Attempting to contact (DESCRIPTION=(ADDRESS_LIST=(address=(protocol=tcp)(host=xx
xxxx.xx.xxx.com)(port=1533)))(CONNECT_DATA=(SID=DBTEST1)(GLOBAL_NAME=DBTEST1.xx
xx.xx.com)))
OK (60 msec)
2)after restarting the repository
C:\Oracle\ora92\network\ADMIN>tnsping dbtest1
TNS Ping Utility for 32-bit Windows: Version 9.2.0.1.0 - Production on 30-NOV-20
07 16:37:24
Copyright (c) 1997 Oracle Corporation. All rights reserved.
Used parameter files:
c:\oracle\ora92\network\admin\sqlnet.ora
TNS-03505: Failed to resolve name
$ ps -ef|grep pmon
oracle 29430 1 0 22:35:23 ? 0:00 ora_pmon_oidtest
oracle 29756 21439 2 22:38:16 pts/2 0:00 grep pmon
$ opmnctl status
Processes in Instance: panther_oid_a.panther.am.kwe.com
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
DSA | DSA | N/A | Down
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | 26840 | Alive
HTTP_Server | HTTP_Server | 26704 | Alive
OID | OID | 26435 | Alive
Please Any ideas why it can't resolve service name anymore after bouncing the repository?Below is the error that i am getting when trying to startup all the services.Please let me know where i am going wrong with this,everything was working fine until i shutdown(sqlplus) the repository to test if it still resolve the name and then i restarted the repository using sqlpus and its failing to resolve the names so i had to stopped everything with below command and when starting it with opmnctl startall it failed with the below error.
$ opmnctl stopall
opmnctl: stopping opmn and all managed processes...
$ opmnctl startall
opmnctl: starting opmn and all managed processes...
================================================================================
opmn id=panther:6200
1 of 2 processes started.
ias-instance id=panther_oid_a.panther.am.kwe.com
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
OID/OID/OID
Error
--> Process (pid=0)
database dependency failed
oidtest
failed to start a managed process because a dependency check failed
Log:
none
Thanks -
LDAP(iPlanet & OID) Net Service Names
Hi There,
Is it possible to use iPlanet's LDAP for net service names lookup instaed of Oracle Names?
Is there a way to extract the schema in OID and import into iPlanet ldap. If this could be done then NET8 should be able to connect to the directory server. Why I say this is: according to Oracle documentation, Net8 supports directory naming:
"Service addresses and net service names can be stored in a Lightweight Directory Access Protocol (LDAP)-compliant directory server."
Has anyone done this?.
With the release of Orcale 9i Oracle is due to ship a product called Oracle Names LDAP Proxy. Is there any information on this product.
All comments and suggestions are very welcome and appreciated
Regards
Pat LehaneHi Jay,
Thanks for the reply.
I installed NET 8.1.7 and am trying to connect to iPlanet LDAP through NET8 Configuration Assitant to create an Oracle schema in the in the iPlanet Directory Server but I get an error as follows:
configexception: Could not create Oracle schema:oracle.net.config.ConfigException
You must update the schema from a computer which directly supports your type of directory
There are still only three options in the directory server type in NET8 config assitant.
Is there another way of creating the schema in iPlanet or is there some steps to be done in iPlanet first.
Regards
Pat -
Issue in migrating analysis service job from one server to another
Hi All,
I'm migrating analysis services from one server to another, within the source server there is a job with the name
denreportingprocess which executes a batch file within local drive on server. I have moved all the analysis services cubes from the source server to destination and all the databases on the source server have been restored to destination.Verified
cubes are pointing to the correct database by modifying the connection string within the datasource part of the cube databases.
I have copied the entire process folder from source to destination and edited the code within the run file and code within the job pointing the locations to new server.
Below is the job code, it is running a batch file placed in E drive
E:\MSSQL10_50.MSSQLSERVER\process\run.cmd
Below is the text within the batch file (windows command script)
E:\MSSQL10_50.MSSQLSERVER\process\ASCMD -S "servername" -i "E:\MSSQL10_50.MSSQLSERVER\process\Process.xmla"
-o "E:\MSSQL10_50.MSSQLSERVER\process\Log.txt"
Below are the list of files within the folder E:\MSSQL10_50.MSSQLSERVER\process
ASCMD
process.xmla
Logs.txt
run
When I run the job it is failing with below error message
Ascmd: Exception trying to impersonate user: Access to the path 'E:\MSSQL10_50.MSQLSERVER\process\log.txt' is denied.
Ascmd: Execution failed: Access to the path 'E:\MSSQL10_50.MSQLSERVER\process\log.txt' is denied.
Thanks in Advance.
Regards, KranthiHi Visakh,
Thanks for the reply, I have mapped the account under which the job was running to D drive, now it can access the file but job is still failing and error is not that informative.
Below is the error message with which the job is failing, where can i find this output file with errors
Executed as user abc_agent. C:\Windows\system32>E:\MSSQL10_50.MSSQLSERVER\process\ASCmd -S "servername" -i "E:\MSSQL10_50.MSSQLSERVER\process\process.xmla" -o "E:\MSSQL10_50.MSSQLSERVER\process\Log.txt" Microsoft
(R) Analysis Services 2008 Command Line Tool Version 10.0.87.5 X86 Copyright (C) 2008 Microsoft Corporation. All Rights Reserved.Ascmd: Check the output file for errors. Process Exit Code 1. The step failed. -
Migrating Certificate Services to Server 2012 in a 2008 R2 AD Domain
We have a Windows 2008 R2 SP1 Active Directory domain. Our Enterprise Certificate server is running on Windows 2003 R2. We'd like to introduce a Windows 2012 server into our existing domain and migrate the Certificate Services to that new box. Are there
any 'gotchas' to implementing Certificate Cervices on a Windows Server 2012 system in a Windows 2008 R2 SP1 domain that we should be concerned with?
Orange County District AttorneyHi,
You can migrate Certificate Services to another server but server name should be same. Also changing the server name which has CA role installed is not recommended.
AD CS Migration: Preparing to Migrate
Applies To: Windows Server 2003, Windows Server 2003 R2, Windows Server 2008, Windows Server 2008 R2, Windows Server 2012
http://technet.microsoft.com/en-us/library/ee126102(v=ws.10).aspx
Also I would request to post this question in security forum :
http://social.technet.microsoft.com/Forums/en-US/winserversecurity/threads
Also you consider, Windows Server 2012 General forum :
http://social.technet.microsoft.com/Forums/en-US/winserver8gen/thread
Best regards,
Abhijit Waikar.
MCSA | MCSA:Messaging | MCITP:SA | MCC:2012
Blog: http://abhijitw.wordpress.com
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees and confers no rights. -
Managing Net Service Names in Oracle Internet Directory
Hello,
I would like to manage all my company's network Service Names using OID included in Oracle Fusion 11g.
Looking for a documentation I've found only an Oracle document related to OID 10.1.4.0.1
http://www.oracle.com/technology/pub/articles/chan-oid.html
Where is possible to find similar documentation related to OID in 11g release?
With Best RegardsSuggestion: realize that 11gR2 doesn't exist yet.
-
Error in Creation of Service Name for Bussiness Service
Hi Friends
I am creating customized Service Program for Bussiness Service which is used for uploading spotbilling data to ccb . The service program CM_Sbm_Upload consists of program com ids CIPBSEGP,CIPMMRDP,CIPTSATP . when i give this to bussiness service i am getting error
Service metainfo missing for 'CM_SBM_UPLOAD'
pls help me to resolve this issue.
Thanks&Regards
sivaramHi,
I've got the same error during my development of a page maintenance service.
Please check if the cm.jar is correctly deployed in your splservice.ear and check also all other deployment directories.
You can find them in the Output window of eclipse after execution of the "Deploy CM" script.
When the cm.jar is deployed well, check if you annotations are correct.
My annotations are looking like this:
* Perform Batch Add.
* @PageMaintenance (secured = false, service = CMIMDIMP,
* body = @DataElement (contents = { @DataField (name = CM_SIMULATION)
* , @DataField (name = XML_REQUEST)}),
* actions = { "change"
* , "read"},
* modules = { "foundation"})
*/To connect a Page Maintenance Service, you must first create a service programm and the "service name" of the service program must match to
the name of the service annotation that you have specified on your Page Maintenance Service, in my case "CMIMDIMP".
There is no validation during the saving of the service programm, the validation happens when you save the Business Service.
BTW. you can use jd-gui.exe to decompile the cm.jar file but you will not see the annotations !
For viewing the ear file I'm using 7-zip. -
Is there a way to update an external dictionary for services without migrating the services
Is there a way to update an external dictionary for services without migrating the services
Is there a way to update a common external dictionary used by many services without migrating each and every service that uses the dictionary. I have updated the table in the database and the external dictionary in our Development Environment. The external dictionary is used by many services. When I migrate the changed service to TEST/STAGE/PROD environments (NOTE: the table has been updated in the TEST/STAGE/PROD Databases), only the changed service is having the external dictionary updated. All other services that use the same external dictionary are NOT updated. I have the following questions
Is it possible to migrate dictionaries so that all the services which are using that dictionary are updated?
If the first one is not possible, Is there any other way to update the external dictionary without migrating all the services that use dictionary?dont think so but I could be wrong
as it were I didn't like the build in audio so I connected some external logictech 2.1 speakers but there
are times when I use headset so I bought this one
or any minijack splitter will work too so I have 2 things connected to the headset port works just fine
http://www.belkin.com/IWCatProductPage.process?Product_Id=404634 -
Issue while creating connection pool in weblogic using SERVICE NAME
Found two issues while creating connection pool in weblogic using SERVICE NAME
1. While running apps from jdeveloper using xxx-jdbc.xml
weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: Io exception: The Network Adapter could not establish the connection
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:253)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1109)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1033)
at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:214)
at weblogic.jdbc.common.internal.ConnectionPool.doStart(ConnectionPool.java:1051)
2. Configuriing the jndi in Weblogic server
weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
localhost:1521:SERVICENAME
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:253)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1109)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1033)
Problem
database url is generated based on SID
eg: jdbc:oracle:thin:@localhost:1521:SID
Solution
(generate seperate url for SERVICE NAME)
jdbc:oracle:thin:@localhost:1521/SERVICENAME
------------------------It is so clear: host not found error for network connection and the other SID servcie name not found means your oracle instance name is not up. check with srvctl status for given servcie name or node, else check CRS_Stat -t if you are using RAC.
-
How do I get a new value for the service name field and update it in Connection Properties?
I am running Windows Vista. I just upgraded to Firefox 4. When I try to log on to the internet, it tells me the proxy server is refusing connections. A diagnostic reported Error 815 and said the remote server is not responding because there is an invalid value for the "Service Name" field. It said to get a new value and update it in Connection Properties. How do I do this?
When you create a new film script, the first page you see is a title page.
The page after this title page is the one where you generally type in your scenes.
It looks like you are facing some issue and not able to delete any text.
Can you please send me this script so that I can have a better look at your issue?
You can save this script to disk by using option 'File -> Save to disk'. This will create a '.stdoc' file on your system.
Just mail this '.stdoc' file to me at 'roverma <at> adobe <dot> com'
Thanks -
EM doesn't allow creation of tnsnames.ora entry with service name orcl11gr2
Dear all,
I'm trying to create a net service name with EM Database Control, via Net Services Administration link. On the service name field, under the 'Edit Net Service Name' screen, I key in orcl11gr2, and it throws the the following error:
Validation Error
Examine and correct the following errors, then retry the operation:
Service Name - Specify a valid service name.
I wonder what is the extra validation that EM is checking. I assume it's checking the number of characters to be 8 characters or less.
Also, because of this extra validation that is in EM, all tnsnames.ora entry that have service name = orcl11gr2, I will not be able to use EM to modify them, as I will get the same above error.
But why does Oracle implements this extra validation, when the same validation is not implemented on other Oracle tools? For instance:
1. dbca allows me to create a database with instance_name greater than 8 characters, and the outcome of initialization parameters will be as follow:
db_name=orcl11gr -- truncated to 8 characters
instance_name=orcl11gr2
db_unique_name=orcl11gr2
service_names=orcl11gr2
2. Oracle Net Manager supports service name of orcl11gr2. The created Net Service Name, I have no problem connecting to the database.
3. Listener support orcl11gr2 service name
I'm using Oracle 11g R2 (11.2.0.1.0) for Microsoft Windows (x64), running on Windows 7.For your reference, here is the bug numbner: 10278345.
-Mughees -
How to get the service name of a webservice using UDDI API
Hi,
Iam working on setting up a dynamic partner link in a BPEL, by passing the endpoint of a web service queried from the UDDI (Oracle Service Registry 10.3 ) using the API. Iam able to do it successfully.
Now, for example I have two operations in my wsdl, one to createCustomer and the other to bookTicket. I need to get the operation name using UDDI API so that i can pass it along with the endpoint to the partner link. ie. When i need to createCustomer, my UDDI API code will need to get the service name createCustomer and the endpoint and I would pass them to the partnerlink and the createCustomer operation of my webservice would be called.
Can any one help me to get the service names of the wsdl using UDDI APIs.
Thanks,
AnanthHi sia,
1. Table is APQI
2. field name for session name is GROUPID
regards,
amit m. -
while installing oracle data warehouse builder 10g
i am getting prob such tat
INS0009:Unable to connect to the database with user SYS
java.sql.SQLException:Io exception : could not resolve the connect identifier
OraHome_1\network\ADMIN\SAMPLE\TNSNAMES.ORAhi my problem is in repository assistant IN 2ND STEP
After i enter the
Repository User name sindhu
Repository User Password tiger (As i kept the password of Oracle 10g)
SYSDBA User name SYS
SYSDBA Password tiger (As i kept the password of Oracle 10g)
Host name Local Host
Port number 1521 (default)
Oracle Service name OracleServiceXE
and i am not clicking the SQL* Plus
and clicking on " Next "
then my prob is
INS0009:Unable to connect to the database with the user SYS
java.sql.SQLException : Listener refused the connection with the following error
ORA-12514, TNS: listener dosenot currently know of service requested in connect descriptor
The Connection Descriptor used by the client was
(DESCRIPTION=(ADDRESS=(HOST=LOCALHOST)(PROTOCOL=tcp)(PORT=1521))(CONNECT_DATA=
(SERVICE_NAME=ORACLESERVICEXE)))
hope some one will give me a gud solution
Waiting for ur reply
Sindhu -
Hi,
We have a cluster with 2 nodes. Everything works fine in Node1. When I try to failover TEST1 database to Node-2 it fails with this message.
Generic service 'Analysis Services (TEST1)' could not be brought online (with error '1060') during an attempt to open the service. Possible causes include: the service is either not installed or the specified service name is invalid.
Any help is much appreciated.
ThanksHello,
The error message is pretty straight forward, it's saying either the service isn't installed or it's not installed as the same service on that node. Did you install analysis services on the second node (from the error it seems like it isn't)?
Sean Gallardy | Blog |
Twitter
Maybe you are looking for
-
Data migration b/w r11 and r12
Hi, the place i worked have boht R11 & R12 intances, i need to move some clients (shared service cnetre) from r11 to r12. In terms fo data i.e. AP, AR & GL. i need to find a quick way around. My concern is 1) should i just move the Open POs if yes /n
-
Hello, my ipad mini is not charging what so ever and it is literally 0%. Once I put it on my wall charger, it still won't charge. I tried rebooting it, by pressing the home and sleep button for 15 second. I tried to change the wall outlet, AC Charger
-
Dynamic Variable - Time/Date
I am trying to update a standard query and make it less manually intensive. The issue at hand is that the way the query and data is structured, we need to go into the query each quarter and then add another quarter column at the end. I am not sure ho
-
Is there a system status web page for iCloud and email?
It's days like this that I scratch my head wondering how to find Apple technical assistance. Does it exist? At least we have a forum to see that everyone else is having problems too.
-
URGENT! Problems with On-Commit and Key-Commit triggers!!
Hi there, We are having a problem with our form actually saving a value to the database after the commit_form is given. When we hit the Save Button (which triggers the Key-Commit, and that in turn triggers the On-Commit trigger) we want a populated g