Migrating RequestSet from instance to Other Instance Without FNDLOAD

hi all,
Can we migrate request set from one instance to other instance without FNDLOAD.?
Thanks

not yet i'll try now..so what you mean is when i transfer the request set to other instance all related files will also transfer(including Executable programs ,concurrent programs ),right..?No, all required concurrent programs should exist on the target instance before using FNDLOAD to migrate request sets to the target instance. If the concurrent programs are not there, you have to migrate it before migrate request sets.
How To Download Request Set Definition From One Instance And Upload On Another Instance [ID 247126.1]
To download/upload concurrent programs, please refer to:
FNDLOAD Download / Upload Concurrent Programs Fails To Load Parameters [ID 1101946.1]
How to Upload the 'ldt' files Manually [ID 1092694.1]
Thanks,
Hussein

Similar Messages

CAN I CONNECT 2 TIME CAPSULES, TO MIGRATE DATA from 1 to other?

I am trying to migrate all data from a TC 3rd Gen 2TB, to a 4th Gen 3TB, is it possible?? I have tryed to no avail and y have read that is not possible. I would like to connect the new one as a Shared Drive in my network to then trasfer data. Wireless capabilities are not requiered for the new TC. Thanks a lot for the knowledge and assistance...

See item #18 in Time Machine FAQ. On that page there's advice on what you want to do in item #2 of the "How to" section.

Migrating "Documents" from one user to another without permission issues

Hi,
I'm facing an issue with permissions on files I have moved from one users "documents" to another users "documents" folder.
To cut a long story short, I have installed a new HD in my iMac and have cleanly installed Snow Leopard. In addition I have created a new user (user1) and have also used time machine to recover my original user files using migration assistant (user2).
I wanted to start off with a fresh user (user1), so wanted to copy specific files across from my old account (user2) but no application files or settings.
I have managed to do this for iPhoto, iMovie, iTunes, Mail, iCal and Address Book, however I'm having issue with my "Documents" folder.
Basically I think I initialy moved the "user2" (old) Documents folder into the "shared user" account, logged into "user1" (new) and copied over the files. I thought it was all good, however when my Wife attempted to duplicate her resume to edit a new version OS X requests the users password, also we are unable to rename an existing file or open the documents then save, as we do not have the correct permissions.
I have looked at the permissions and it shows that
user2(old) has read/write
staff has read
everyone has read
This appears to be the same for all files(except "staff" is replaced with "wheel"). When I add user1(new) read/write to the list and apply to all subfile, it does not update all files. I really don't want to be updating all the files seperatly.
Since doing this I also moved the files back to user2(old) then used "copied" the documents folder in the same way as above. Still the same issue.
Is there a correct way of moving files between users which will remove any permission issues? As I must have done something wrong.
Thanks
Chris

To move files from Account A to Account B:
1) Log in as A
2) Move all the files to /Users/A/Public (don't move any system-created folders like Documents, Pictures, etc. Just move their contents.)
3) Log in as B
4) Navigate with Finder to /Users/A/Public
5) Drag the files to the Desktop (this will make new copies of them with correct permissions for B)
6) File the new files away in the appropriate places in B's home folder
7) Log in as A and delete the original copies of the files from A's home folder
If you have already moved files from A to B the incorrect way (i.e. by using /Users/Shared) and are running into permissions issues, fix them by logging in to an Admin account and entering these two Terminal commands:
sudo chown -R userb ~userb (this one changes ownership of everything in B's home folder to B)
sudo chmod -R u+rwX ~userb (this one ensures that B can read and write to everything in his home folder)

Forms and reports migration tools from oracle and other vendors

Can someone through some light about the migration tools available on the market for the migration of oracle forms 10g to 11g?

are there any tools for doing this activity like oracle recommended tools?
Your question is unclear. As IK mentioned, the only tool you need is a new version of Oracle Forms/Reports. Open your v10 modules in a v11 Builder and select Save. You now have a v11 module. Doing a "Compile All PL/SQL" before saving is a good idea, but not required. The Builders and utilites provided with the version 11 installation are the only supported tools for upgrading your application. If you are trying to do the conversion of many Forms files in a scripted manner, you can use the Forms compiler in a script. Generating new "X" files will also update the source modules (fmb, mmb, pll). See MyOracleSupport Note 955143.1
Also included in the installation in the Forms Migration Assistant. Although it is more useful to people coming from older versions, it can also be used to move from v10 to 11. It allows you to select more than one file at a time. Documentation for this utility can be found in the Forms Upgrade Guide.
Using the Oracle Forms Migration Assistant

How do I deliver sound from mixer into other applications without latency?

I've got a mixer delivering audio into my Thunderbolt port. I want to take the mixed audio, on channels 15 and 16, and input those into VOIP app and video recording apps. I'm using LineIn and Soundflower to accomplish this. However, LineIn is adding in a lot of latency which is a big problem for the kinds of recordings I'm doing.
What are professionals out there using to minimize this latency?

I have the same problem as Ham. I can't see the context menu for sound.
I saw that context menu in the video that Sudarshan mentioned, but it's not in my Photoshop CS6, where - like Ham experienced - i only see a context menu for Motion.
Just as Ham, i do see the sound context menu at the beginning of my work. I even got to clips in a project where one clip offers sound editing, the other doesn't.
Clips where sound can be edited appear as a blue bar. Clips where sound cannot be edit appear as a violet bar. Even if i add an MP3, it appears as a violet bar, so sound cannot be edited while motion editing is offered. I also tried to dampen the sound via the opacity control in the layer panel, but it didn't work.
I already created a complicated project out of 6 clips. I can't restart now to edit audio before anything else.
Is there any way to get audio editing (in the limited way that's part of Photoshop CS6 sometimes) in ALL clips within a project?
Thanks!

Any way to migrates Notes from one iPhone to another

Is there any way to migrates Notes from one iPhone to another without backup restore?

HI Amir,
Checkboxes evaluate as TRUE when checked, FALSE when empty.
For your example:
C1: =IF(B1,A1,"")
Works with text (as shown), numbers, or the results of formulas in the source cells.
The last argument, "" inserts a null string in the cell containing the formula, making the cell appear 'blank'.
Regards,
Barry.

How to migrate Subscriptions from once instance to other

Hi,
How to migrate Subscriptions from once instance to other.?
Thanks,
Hemanth.

Hi,
Its Workflow Administrator Web Applications > Administrator Workflow > Business Events
Search for business event and create the subscription here..
Also we can disable the subscriptions here.
If I create a new one and disable a old one..how can I migrate this to another instance?
Thanks,
HC

How to migrate security from 1 bobj instance to another

Hi ,
I have a requirement
how to migrate security from 1 bobj instance to another
Please help me for the same .
Regards,
Abhishek

Are you using Win AD groups or Enterprise groups to apply security?
What is the BO version of source and Destination?

Error while migrating reports from one instance to another(no torch seen)

Hi,
I am facing this problem when I am trying to migrate reports from UAT to Production. After migration when I try to run the report from Discoverer plus, I cannot see the torch symbol which is general if we have any parameters for that report. So, I again migrate the same .eex file and now I see the torch.
Can any one throw some thoughts why is this happening, why I cannot see the torch symbol in the first time itself?
Thanks,
Srini.

Hi Srini
The list of values is not being associated with the item the first time around. The order in which the items are selected is important so for example if lists of values were imported first without the items upon which they depend they will be ignored. Running the import a second time will cause the LOVs to recognize their associated item and thus the association will be made.
Generally I do two exports. I will export my folders and workbooks first and then export my item classes.
Hope this helps explain what you are seeing.
Best wishes
Michael

Simple:How is Copying table space from instance to other?

Please .. Can u give me the complete way to Copy table space from instance to other using imp/exp???

Given you didn't post a version you seem to assume there is only one way ... there are at least four I know of so you need to look up the answer for your version yourself.
http://tahiti.oracle.com
look up transportable tablespaces
http://www.psoug.org/library.html
Working demos under Transportable Tablespaces
http://www.caleb.com
look under the DBA scripts

Is it possible to clone an instance without any data?

Hi,
Is it possible to clone an instance without any data?
Say I want to clone an instance to make a new instance on some other server so that the new clone will be same like a fresh installation without any customization and data in it.
Thanks

EBS with empty database
One option you have is to do another fresh install, apply all of the patches that have been applied on the current instance, then use iSetup to migrate your setups from source to target.
http://docs.oracle.com/cd/E18727_01/doc.121/e12899/toc.htm
HTH
Srini

OIM11gR2 - How to migrate an Application Instance Form

Hello,
I'm trying to migrate an Application Instance Form from my Dev env to my QA env.
My target system is SAP
I performed the following steps in Dev:
1. Installed and configured the SAP Connector (no problem here)
2. Created a sandbox
3. Created an Application Instance
4. Created the Application Instance Form
5. Ran a target reconciliation to confirm everything is working properly
6. Exported the sandbox
7. Published the sandbox
8. Via Deployment Manager I exported all objects related to SAP (Resource object, Process Forms, Lookups etc.)
In QA I did:
9. Installed and configured the SAP Connector (no problem here)
10. Via Deployment Manager I imported the objects related to SAP
11. Imported the sandbox
Problem:
To my surprise, the Application Instance does not have a Form in the QA env.
I had to create it manually by performing the following:
12. Create a sandbox
13. Open the Application Instance definition
14. Click on create (to create a form)
15. Entered the same name I used in my Dev environment
16. Received an error message saying that the form already exists
17. Entered a different name for the Form
18. Saved
19. Exported the sandbox (to import in Prd)
20. Published the sandbox
21. Ran a target reconciliation to confirm everything is working properly
I tried to reproduce the problem with another (test) destination environment because I don't want to have the same problem when migrating to Prd.
I repeated the steps 9,10,11 except that I imported the sandbox exported from QA (step 19) instead.
The same problem: Application Instance definition has no Form attached to it in my test destination environment.
If I try to create the form with the same name, it gives an error message saying it is already there.
Is my procedure wrong?
Is there an official procedure explaining how to migrate only Application Instance Form from one env to another?
My env:
OS: Windows 2008 R2 SP1
OIM: 11gR2 BP7
SAP connector: 9.1.2.2.0
Thanks,
Adr

This is a bug: Bug:16027176
Check the [Article ID 1515225.1] which proposes a workaround that might be useful in your case (it was not in mine).
In short the workaround is:
The following order should be observed to export :
- IT Resource & Application instance in one xml
- Request DataSet in another xml
- SysAdmin Sandbox (the one defined while creating the Application Instance and the Form)
- Identity URL Sandbox (defined while customizing the fields on the Form, in the Catalogue page)
Adr

How to select instances without null value?

hye all,
i need to do th ereprocessing data whereas i have to select the instances without null value from the database..
for example:
id name
123 izza
345 alex
567
the id = 567 contain null value..so..its automatically will not be selected from the database...
how about if it have about 10 or more attributes to be selected..
how can i work with the SQL thanks..

Hi,
Query for your example should like like this:
SELECT * FROM <your_table>
WHERE name is null;
how about if it have about 10 or more attributes to be selected..
If using 10 or more attributes you mean 10 or more columns with null use this:
SELECT * FROM <your_table>
WHERE <col1> is null AND <col2> is null etc...Peter D.

Can't we start a RAC instance without local pfile ?

DB version : 11.1.0.7.0
OS : Solaris 10 SPARC
--Info about the cluster
2 Node RAC
Both instances using spfile stored in ASM Diskgroup
Passwordless SSH configuration is not working currently (i gather ssh is not mandatory after installation)
We have 7 RAC DBs running in our 11.1 CRS.
After a reboot of our 2 Node RAC servers, in Node2, 4 instances didn't come up.
None of these down instances have a local pfile. The ones that are up in Node2 have it.
So, When i manually tried to bring up the ones that are down
$ sqlplus / as sysdba
SQL*Plus: Release 11.1.0.7.0 - Production on Fri Mar 2 21:28:22 2012
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/u01/app/oracle/product/11.1/db_1/dbs/initorcl2.ora'
SQL> exit
Disconnected-- Tried directly with spfile (No such option in oracle, but still tried ! )
SQL> startup spfile='+ORCL_DATA01/ORCL/spfileorcl.ora'
SP2-0714: invalid combination of STARTUP options-- Tried from Node1
-- This might have failed because ssh is not working currently. Not sure
$ srvctl start instance -d orcl -i orcl2
PRKP-1001 : Error starting instance orcl2 on node manhclust199
CRS-0215: Could not start resource 'ora.orcl.orcl2.inst'.
$ srvctl start database -d orcl
PRKP-1001 : Error starting instance orcl2 on node manhclust199
CRS-0215: Could not start resource 'ora.orcl.orcl2.inst'.Finally I had to create a local pfile on node2 for each instances in OH/dbs
The content of each local pfile is like
$ cat initorcl2.ora
spfile='+ORCL_DATA01/orcl/spfileorcl.ora'Now the startup worked without any issue for all 4 instances
SQL> startup
ORACLE instance started.
Total System Global Area 2137886720 bytes
Fixed Size                  2155464 bytes
Variable Size            1593838648 bytes
Database Buffers          536870912 bytes
Redo Buffers                5021696 bytes
Database mounted.
Database opened.So, local pfile is mandatory for all RAC instances ?

Hi,
My question is whether this instance specific local pfile must be there in OH/dbs directory ?YES
Didn't get a clear answer yet.
It seems that it is mandatory. And this is most probably the reason these instances didn't come up after the reboot of this node.Startup Sequence:
Startup of Cluster:
Using "srvctl" to start your database/instance:
Srvctl read the OCR and check the parameter SPFILE from your database registration:
If parameter SPFILE in OCR have a value the srvctl will use this value to start your database instance.
If parameter SPFILE in OCR don't have a value (i.e null) Oracle will try find the file SPFILE<ORACLE_SID>.ora on $ORACLE_HOME/dbs
If the file SPFILE<ORACLE_SID>.ora does not exists, Oracle will try use the file init<ORACLE_SID>.ora
If init<ORACLE_SID>.ora does not exist... the startup will fail.
From ORACLE_HOME of your database execute command above to get value of Spfile parameter on OCR:
srvctl config database -d <DB_NAME> |grep SpfileStartup manually from SHELL using SQLPLUS:
Using SQLPLUS to start a database Oracle always first use SPFILE<ORACLE_SID>.ora stored on $ORACLE_HOME/dbs/ if this file does not exist he will try use INIT<ORACLE_SID>.ora to start Database Instance.
If your spfile is stored on ASM you must create a INITFILE pointing to SPFILE stored on ASM.
e.g From instance 1
cat /oracle/oracle/product/11.2.0/db_1/dbs/initorcl1.ora
SPFILE='+DATA/ORCL/spfileorcl.ora'Regards,
Levi Pereira

Stoping an Instance without Error

Hi there,
I Have a large process that can be stoped in several places winthin, according to the responses from sub-processes that he calls.
I was looking for a way to close the instance without "terminating" it so we avoid the "redness" in the bpel console when a process is to be stop by business logic.
I thought a found a way using java to get the instance handler and then "canceling" that instance. it works fine. the instance is closed and the instance stays "green" in the console and it apears in the "audit": "
[2006/09/05 14:55:16] BPEL process instance "119344" cancelled ".
althougth this apparantly works, the process stays in executing, still calling other sub processes that are after this phase in the process.
Here is my java code:
try{
String sInstanceId = String.valueOf(getInstanceId());
com.oracle.bpel.client.Locator loc = getLocator();
com.oracle.bpel.client.util.WhereCondition cond = new com.oracle.bpel.client.util.WhereCondition("CIKEY = " + sInstanceId);
com.oracle.bpel.client.IInstanceHandle[] instanceHandleList = loc.listInstances(cond);
com.oracle.bpel.client.IInstanceHandle instanceHandle = instanceHandleList[0];
instanceHandle.cancel();
}catch(Exception e){
e.printStackTrace();
addAuditTrailEntry("Exception:" + e.getMessage(), e.getMessage());
Can someone please help?
Tks

looking into the doc,
cancell => "When an activity is cancelled, the performer of the activity is notified of the cancellation and is given an opportunity to rollback or cancel any work that has already been done on behalf of the activity. Since this clean-up procedure can take an indeterminate amount of time, cancelling an instance may not be instaneous and could result in new activities being activated."
Nutshell: could take fairly long 'til something happens
abort => "Aborts the instance. Aborting an instance differs from cancelling one; the latter informs the performers of any active activities that the activity is being cancelled and allows the performer to clean-up or rollback the any changes made. Aborting an instance will simply mark the activities as having been aborted without the chance for clean-up. This method is included for administrative purposes only."
so you might want to use abort ..
/clemens

Migrating RequestSet from instance to Other Instance Without FNDLOAD

Similar Messages

Maybe you are looking for