Migrating; same x230, new hard drive. Need help figuring out Lenovo driver package installation

Hi all,
I'm looking at replacing a HD on the GF's x230. I have the Windows 7-64bit migration all figured out (WET) but I was cruising around the Lenovo site and I'm clueless about how to install ALL Lenovo drivers once I have Windows installed. Can I use the SCCM as a home user? Do I just install Lenovo update once Wins 7 is complete and it will self detect whats needed? Or is there some sore of mechanism on the x230 I'm currently unaware of? I see Lenovo has a program similar to Windows Easy Transfer but they never make clear if it will back up Windows AND Lenovo apps and drivers. Would rather use WET then a Driver package from Lenovo.
Studying for my A+ cert now so I'd really like to gain experience and get this sucker migrated properly!!
Thanks in advance everyone!!

After you have your OS install complete, and Microsoft updates, you can go to Lenovo's support website. Download "system update" http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-61432#update
This is a program that will detect your system and then show you what drivers and software to install specific to your machine. Another benefit is that you can run it periodically to let it check for the latest versions of drivers and software a well.
In addition, since I have found that this software, while good, is not fool proof, you can click on the "driver matrix" below and then select your machine type and OS and it will list pretty much everything available for your particular system. I double check what system update offers with what is on the system specific drivers page to make sure I don't miss anything. Takes a little longer but you really get to see all the software and drivers out there - and usually up to date as well. Good luck!
http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=TPAD-MATRIX

Similar Messages

TS3798 I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.

I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.

amarilysfl wrote:
"Your disk could not be partitioned. An error occurred while partitioning the disk".
https://www.apple.com/support/bootcamp/
If you were using Apple's BootCamp and received this message, quit it and open Disk Uility in your Applicaitons/Utilities folder.
Select the Macintosh HD partition on the left and select Erase and Erase Free Space > Zero option and let it complete (important) this will check the spare space for bad sectors that can cause issues formatting partitions.
Once it's completed, try creating a partiton again in BootCamp.
If that doesn't work, then hold command option r keys down while connected to a fast internet connection, Internet Recovery should load (spinning globe) and then in that Disk Utility, select your entire internal drive and click > First Aid > Repair Disk and Permissions.
reboot and attempt Bootcamp again.
If you still get a error, it might be that you have OS X data on the bottom area where BootCamp partition needs to go. This would occur if you had the drive or computer for a long time or wrote a large amount of files to the drive and nearly filling it up and then reduced some, but it left traces in the area BootCamp needs to go.
To fix this
BootCamp: "This disc can not be partitioned/impossible to move files."
How to safely defrag a Mac's hard drive

I have a mac 10.5 and need help figuring out how to change my email settings so it does not automatically delete my inbox every 30 days. How to I adjust the mail settings?

I have a mac 10.5 and need help figuring out how to change my email settings so it does not automatically delete my inbox every 30 days. How to I adjust the mail settings?

I think it must be an IMAP account then, & in Mail>Preferences>Accounts>Advanced>Keep copies for Offline viewing:>Don't keep copies, then on the Server, or maybe it's just this one itself, but on the Server you have a setting to remove eMails after 30 days.
If it's a POP account we'd have to investigate that... but you didn't say so I'm guessing here.

Need Help figuring out how to alphabetize itunes artist.

I need help figuring out one more thing. I have my artist tab in my itunes library and I need to figure out how to get all the artists grouped together instead of being scattered all around.
This is how it looks now:
Justin Timberlake
Linkin Park
Linkin Park
Linkin Park
Justin Bieber
Daughtry
Linkin Park
Linkin Park
JoJo
Linkin Park
This is how I want it to look:
Daughtry
Justin Timberlake
Justin Bieber
JoJo
Linkin Park
Linkin Park
Linkin Park
Linkin Park
Linkin Park
Please help! Thanks!

Enable the Sort Artist, Album Artist and Sort Album Artist columns so you can see what is going on. Album Artist normally takes precedence over Artist, with the Sort fields further controlling the order.
See also Grouping tracks into albums.
tt2

How do I get my previous contacts from mobileme now to the icloud? I need help figuring out how to make that transition?

How do I get my previous contacts from mobileme now to the icloud? I need help figuring out how to make that transition?

Try using the app My Contacts Backup, which will back up your contacts as an attachment to an email. Send this email to yourself, open it on your Mac and double-click the attachment to import them to Address Book (or Contacts if you have Mountain Lion).

Need help figuring out what's wrong with my code!

I am having a few problems with my code and can't see what I've done wrong. Here are my issues:
#1. My program is not displaying the answers to my calculations in the table.
#2. The program is supposed to pause after 24 lines and ask the user to hit enter to continue.
2a. First, it works correctly for the first 24 lines, but then jumps to every 48 lines.
2b. The line count is supposed to go 24, 48, etc...but the code is going from 24 to 74 to 124 ... that is NOT right!
import java.text.DecimalFormat; //needed to format decimals
import java.io.*;
class Mortgage2
//Define variables
double MonthlyPayment = 0; //monthly payment
double Principal = 200000; //principal of loan
double YearlyInterestRate = 5.75; //yearly interest rate
double MonthlyInterestRate = (5.75/1200); //monthly interest rate
double MonthlyPrincipal = 0; //monthly principal
double MonthlyInterest = 0; //monthly interest
double Balance = 0; //balance of loan
int TermInYears = 30; //term of loan in yearly terms
int linecount = 0; //line count for list of results
// Buffered input Reader
BufferedReader myInput = new BufferedReader (new
InputStreamReader(System.in));
//Calculation Methods
void calculateMonthlyPayment() //Calculates monthly mortgage
MonthlyPayment = Principal * (MonthlyInterestRate * (Math.pow(1 + MonthlyInterestRate, 12 * TermInYears))) /
(Math.pow(1 + MonthlyInterestRate, 12 * TermInYears) - 1);
void calculateMonthlyInterestRate() //Calculates monthly interest
MonthlyInterest = Balance * MonthlyInterestRate;
void calculateMonthlyPrincipal() //Calculates monthly principal
MonthlyPrincipal = MonthlyPayment - MonthlyInterest;
void calculateBalance() //Calculates balance
Balance = Principal + MonthlyInterest - MonthlyPayment;
void Amortization() //Calculates Amortization
DecimalFormat df = new DecimalFormat("$,###.00"); //Format decimals
int NumberOfPayments = TermInYears * 12;
for (int i = 1; i <= NumberOfPayments; i++)
// If statements asking user to enter to continue
if(linecount == 24)
System.out.println("Press Enter to Continue.");
linecount = 0;
try
System.in.read();
catch(IOException e) {
e.printStackTrace();
else
linecount++;
System.out.println(i + "\t\t" + df.format(MonthlyPrincipal) + "\t" + df.format(MonthlyInterest) + "\t" + df.format(Balance));
//Method to display output
public void display ()
DecimalFormat df = new DecimalFormat(",###.00"); //Format decimals
System.out.println("\n\nMORTGAGE PAYMENT CALCULATOR"); //title of the program
System.out.println("=================================="); //separator
System.out.println("\tPrincipal Amount: $" + df.format(Principal)); //principal amount of the mortgage
System.out.println("\tTerm:\t" + TermInYears + " years"); //number of years of the loan
System.out.println("\tInterest Rate:\t" + YearlyInterestRate + "%"); //interest rate as a percentage
System.out.println("\tMonthly Payment: $" + df.format(MonthlyPayment)); //calculated monthly payment
System.out.println("\n\nAMORTIZATION TABLE"); //title of amortization table
System.out.println("======================================================"); //separator
System.out.println("\nPayment\tPrincipal\tInterest\t Balance");
System.out.println(" Month\t Paid\t\t Paid\t\tRemaining");
System.out.println("--------\t---------\t--------\t-------");
public static void main (String rgs[]) //Start main function
Mortgage2 Mortgage = new Mortgage2();
Mortgage.calculateMonthlyPayment();
Mortgage.display();
Mortgage.Amortization();
ANY help would be greatly appreciated!
Edited by: Jeaneene on May 25, 2008 11:54 AM

From [http://developers.sun.com/resources/forumsFAQ.html]:
Post once and in the right area: Multiple postings are allowed, but they make the category lists longer and create more email traffic for developers who have placed watches on multiple categories. Because of this, duplicate posts are considered a waste of time and an annoyance to many community members, that is, the people who might help you.

I need help figuring out how to Link Data from one table in Sharepoint to another table in Sharepoint and make it dynamic

Hi Everyone,
I am working on a project that uses SharePoint 2010 for repository and we have multiple tables that we are using.
One table is a list of the various projects we are working on (workstreams)
The other is a table with various notes and such, to include meeting notes for the various projects.
Currently we are just copying the shortcut from the meeting notes table and adding it in as a link in the workstreams status table.
I need to find out if there is some sort of way to make this process dynamic so that when a new note is added for, lets say workstream #1 in the notes table, it will automatically propogate into the notes link section for workstream #1.
Is this even possible??
And if so how would I do it
I haven't done much with modifying SharePoint in several years, and would Truly appreciate any and all help with this.
Thanks in advance
IKE

Hi IKE,
According to your description, my understanding is that you want to create a link in the workstreams list linked to the associated item of the notes list.
Assuming the workstreams list has Title column and another column called “Note” used to linked to notes list, and the notes list has Title column and another column used to store note.
Then you can create a workflow on the notes list with SharePoint Designer 2010, and in the workflow, using “Update ListItem” action. And in the workflow Start Options, select “Start workflow automatically when an item is created”.
For the workflow action, you can set as the screenshot:
For the string in the String Builder, you need to open an item of notes list, then copy the URL of the display form and paste here, the URL will look something like this:
http://sp/Lists/notes/DispForm.aspx?ID=1&Source=http%3A%2F%2Fsp%2FLists%2Fnotes%2FAllItems%2Easpx&ContentTypeId=0x0100300025278693CE49A5E3A394B23AD9E1&IsDlg=1
Now, you need to replace the ID of the item using [%Current Item:ID%], for example in the above link, delete the number 1 and add [%Current Item:ID%].
Best Regards,
Wendy
Wendy Li
TechNet Community Support

I need help figuring out GRUB [SOLVED]

So, I'm having a bit of trouble figuring out how grub's menu.lst should be configured on my system. I've scoured the internet and wiki, but I can't quite get it. Hopefully you can help me!
Here's some info:
joe@Snow-Crash:~$ sudo fdisk -l
[sudo] password for joe:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x1e721e72
Device Boot Start End Blocks Id System
/dev/sda1 1 16554 132969973+ 83 Linux
/dev/sda2 * 16555 19104 20482875 83 Linux
/dev/sda3 19105 19457 2835472+ 5 Extended
/dev/sda5 19105 19457 2835441 82 Linux swap / Solaris
I have HH 8.04 on my main partition [sda1], and I'm trying to put Arch on my 20gb sda2 partition. I followed the beginner's guide up to the install grub section. When it had me review menu.lst the pertinent Arch section was
"title Arch Linux
root (hd0,0)
kernel /vmlinuz26 root=/dev/hda3 ro
initrd /kernel26.img"
Now, I was planning on just copying this bit and pasting it into HH's menu.lst (and not installing grub in arch's partition), but I thought that it didn't seem quite right. It turns out I was right, since I get an "error 15: File not found" when I choose to boot Arch.
So what should it be? This is how I understand it, in my admittedly newbie way.
Am I mistaken in that it should be "root (hd0,0)" Since the root command points to where grub is residing (and I'm using HH's grub in sda1)?
And "kernel (hd0,1)/vmlinuz26 root=/dev/sda2" Since I need to designate that the kernel is on a different partition than (hd0,0), and my Arch partition is sda2?
and as far as I can tell it should be "initrd (hd0,1)/kernel26.img" since it's on a different partition.
I know I'm doing something wrong here, since I still get the same "file not found" error message. Can someone point out the error in my ways?
PS: Since I was having trouble with this I decided to try to to install GRUB in sda2 and use chainloader to point to it from HH's menu.lst. But when I tried to install grub via my Arch cd it gave me a generic "unable to install Grub" message. So I'm up a creek!
I hope you guys can help me out! Thanks.
Last edited by Joe_Arch (2008-11-27 07:51:13)

Welcome Joe_Arch,
You have to set the root to the partition that contains the "OS image" (the kernel). Also, you apparently don't have a separate /boot partition, so you have to add /boot/ to the beginning of the file names.
root (hd0,1)
kernel /boot/vmlinuz26 root=/dev/sda2 ro
initrd /boot/kernel26.img

Need help figuring out crash report please!

Hi there,
So, lately I have been playing Diablo 3 and found out that it has been running slow (FPS wise) so I switched over my graphics card to the NVIDIA GeForce 9600M GT.
Everytime I run the game, randomly my computer will full on crash the sound will freeze and repeat it's self and no buttons work except a hard shut down.
Once I reboot, this is the crash report I get:
Interval Since Last Panic Report: 1233165 sec
Panics Since Last Report:          7
Anonymous UUID: 7B2BFC9A-4351-4CC0-8A24-3F6077B1BD3F
Sat May 19 18:34:23 2012
panic(cpu 1 caller 0x9d4c97): NVRM[0/2:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd4000000 0x5a191000 0x096380c1, D0, P3/4
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x5292b888 : 0x21b837 (0x5dd7fc 0x5292b8bc 0x223ce1 0x0)
0x5292b8d8 : 0x9d4c97 (0xbea22c 0xc5a840 0xbf8f88 0x0)
0x5292b978 : 0xaef5db (0x8f4a004 0x98b2004 0x100 0x200)
0x5292b9c8 : 0xae65d4 (0x98b2004 0x100 0x5292bac8 0x558ce4)
0x5292b9f8 : 0x17eb7bb (0x98b2004 0x100 0x4bcd2cee 0x1)
0x5292bb38 : 0xb0e258 (0x98b2004 0x98ae004 0x0 0x0)
0x5292bb78 : 0x9dde2b (0x98b2004 0x98ae004 0x0 0x0)
0x5292bc18 : 0x9da50a (0x0 0x9 0x0 0x0)
0x5292bdc8 : 0x9dc3d9 (0x0 0x600d600d 0x702a 0x5292bdf8)
0x5292be98 : 0x970582 (0xc1d00021 0xaa910001 0x20802040 0x5292bee0)
0x5292bef8 : 0xd3257d (0x8f94000 0x5292bf4c 0x0 0x7)
0x5292bf58 : 0xd3271a (0x8f76800 0xd39e54 0x5292bf78 0x2a45c9)
0x5292bf78 : 0x230235 (0x8f76800 0x0 0x5292bfc8 0x227cea)
0x5292bfc8 : 0x2a179c (0x863ea0 0x0 0x10 0x150b6f00)
      Kernel Extensions in backtrace (with dependencies):
         com.apple.driver.AGPM(100.12.31)@0xd2f000->0xd39fff
dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x93f000
dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x961000
dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x928000
com.apple.nvidia.nv50hal(6.3.6)@0x16c0000->0x1ad4fff
dependency: com.apple.NVDAResman(6.3.6)@0x96e000
com.apple.NVDAResman(6.3.6)@0x96e000->0xc5bfff
dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x928000
dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x961000
dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x93f000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacBookPro5,1 (Mac-F42D86C8)
System uptime in nanoseconds: 34473350339409
unloaded kexts:
com.apple.driver.AirPortBrcm43xx            423.91.27 (addr 0xeeb000, size 0x1900544) - last unloaded 165512271751
loaded kexts:
com.vmware.kext.vmnet            3.0.0 - last loaded 37912026302
com.vmware.kext.vmioplug            3.0.0
com.vmware.kext.vmci            3.0.0
com.vmware.kext.vmx86            3.0.0
com.mcafee.kext.Virex            1.0.0d1
com.manycamllc.driver.ManyCamDriver            0.0.9
com.apple.driver.AppleHWSensor            1.9.3d0
com.apple.filesystems.autofs            2.1.0
com.apple.driver.AGPM            100.12.31
com.apple.driver.AppleMikeyHIDDriver            1.2.0
com.apple.driver.AppleMikeyDriver            2.0.5f14
com.apple.driver.AppleHDA            2.0.5f14
com.apple.driver.AudioAUUC            1.57
com.apple.filesystems.ntfs            3.4
com.apple.driver.AppleLPC            1.5.1
com.apple.driver.SMCMotionSensor            3.0.1d2
com.apple.Dont_Steal_Mac_OS_X            7.0.0
com.apple.driver.AudioIPCDriver            1.1.6
com.apple.driver.AppleIntelPenrynProfile            17
com.apple.driver.ACPI_SMC_PlatformPlugin            4.7.0a1
com.apple.driver.AppleUpstreamUserClient            3.5.7
com.apple.driver.AppleMCCSControl            1.0.20
com.apple.kext.AppleSMCLMU            1.5.2d10
com.apple.driver.AppleGraphicsControl            2.10.6
com.apple.GeForce            6.3.6
com.apple.driver.AppleUSBTCButtons            201.6
com.apple.driver.AppleUSBTCKeyboard            201.6
com.apple.driver.AppleIRController            303.8
com.apple.iokit.SCSITaskUserClient            2.6.8
com.apple.iokit.IOAHCIBlockStorage            1.6.4
com.apple.driver.AppleAHCIPort            2.1.7
com.apple.BootCache            31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib            1.0.0d1
com.apple.driver.AppleFWOHCI            4.7.3
com.apple.driver.AppleEFINVRAM            1.4.0
com.apple.driver.AppleRTC            1.3.1
com.apple.driver.AppleSmartBatteryManager            160.0.0
com.apple.driver.AirPortBrcm43224            428.42.4
com.apple.driver.AppleUSBHub            4.2.4
com.apple.nvenet            2.0.17
com.apple.driver.AppleUSBOHCI            4.2.0
com.apple.driver.AppleUSBEHCI            4.2.4
com.apple.driver.AppleHPET            1.5
com.apple.driver.AppleACPIButtons            1.3.6
com.apple.driver.AppleSMBIOS            1.7
com.apple.driver.AppleACPIEC            1.3.6
com.apple.driver.AppleAPIC            1.4
com.apple.driver.AppleIntelCPUPowerManagementClient            142.6.0
com.apple.security.sandbox            1
com.apple.security.quarantine            0
com.apple.nke.applicationfirewall            2.1.14
com.apple.driver.AppleIntelCPUPowerManagement            142.6.0
com.apple.driver.AppleSMBusController            1.0.10d0
com.apple.driver.AppleSMBusPCI            1.0.10d0
com.apple.driver.AppleProfileReadCounterAction            17
com.apple.driver.DspFuncLib            2.0.5f14
com.apple.driver.AppleProfileTimestampAction            10
com.apple.driver.AppleProfileThreadInfoAction            14
com.apple.driver.AppleProfileRegisterStateAction            10
com.apple.driver.AppleProfileKEventAction            10
com.apple.driver.AppleProfileCallstackAction            20
com.apple.iokit.IOFireWireIP            2.0.3
com.apple.iokit.IOSurface            74.2
com.apple.iokit.IOBluetoothSerialManager            2.4.5f3
com.apple.iokit.IOSerialFamily            10.0.3
com.apple.iokit.IOAudioFamily            1.8.3fc2
com.apple.kext.OSvKernDSPLib            1.3
com.apple.driver.AppleHDAController            2.0.5f14
com.apple.iokit.IOHDAFamily            2.0.5f14
com.apple.iokit.AppleProfileFamily            41
com.apple.driver.IOPlatformPluginFamily            4.7.0a1
com.apple.driver.AppleSMC            3.1.0d5
com.apple.driver.AppleBacklightExpert            1.0.1
com.apple.nvidia.nv50hal            6.3.6
com.apple.NVDAResman            6.3.6
com.apple.iokit.IONDRVSupport            2.2.1
com.apple.iokit.IOGraphicsFamily            2.2.1
com.apple.driver.BroadcomUSBBluetoothHCIController            2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController            2.4.5f3
com.apple.iokit.IOBluetoothFamily            2.4.5f3
com.apple.driver.AppleUSBMultitouch            207.7
com.apple.iokit.IOUSBHIDDriver            4.2.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice            2.6.8
com.apple.iokit.IOBDStorageFamily            1.6
com.apple.iokit.IODVDStorageFamily            1.6
com.apple.iokit.IOCDStorageFamily            1.6.1
com.apple.driver.AppleUSBMergeNub            4.2.4
com.apple.driver.AppleUSBComposite            3.9.0
com.apple.iokit.IOAHCISerialATAPI            1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily            2.6.8
com.apple.driver.XsanFilter            402.1
com.apple.iokit.IOAHCIFamily            2.0.6
com.apple.iokit.IOFireWireFamily            4.2.6
com.apple.iokit.IO80211Family            320.1
com.apple.iokit.IOUSBUserClient            4.2.4
com.apple.iokit.IONetworkingFamily            1.10
com.apple.driver.NVSMU            2.2.7
com.apple.driver.AppleEFIRuntime            1.4.0
com.apple.iokit.IOUSBFamily            4.2.4
com.apple.iokit.IOHIDFamily            1.6.6
com.apple.iokit.IOSMBusFamily            1.1
com.apple.kext.AppleMatch            1.0.0d1
com.apple.security.TMSafetyNet            6
com.apple.driver.DiskImages            289.1
com.apple.iokit.IOStorageFamily            1.6.3
com.apple.driver.AppleACPIPlatform            1.3.6
com.apple.iokit.IOPCIFamily            2.6.5
com.apple.iokit.IOACPIFamily            1.3.0
Model: MacBookPro5,1, BootROM MBP51.007E.B06, 2 processors, Intel Core 2 Duo, 2.8 GHz, 4 GB, SMC 1.33f8
Graphics: NVIDIA GeForce 9600M GT, NVIDIA GeForce 9600M GT, PCIe, 512 MB
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: Hitachi HTS723232L9SA62, 298.09 GB
Serial ATA Device: MATSHITADVD-R   UJ-868
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0x24400000 / 2
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0x04600000 / 3
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8213, 0x06110000 / 5
I have no idea what any of this means, but if anyone does could you please help me in figuring out what is wrong here??
Thank you so much!
~Mike

Nope, it happened again about 2 minutes into playing Diablo 3, personally it feels like it is overheating, I feel as if the bottom of the Macbook is getting really hot very quickly.
Here is the updated crash report:
P.S. I have uninstalled VMWare, but it still appears in the crash report... not sure what else to do I cannot find anything about VMWare under the Computer search.
Interval Since Last Panic Report: 1636 sec
Panics Since Last Report:          1
Anonymous UUID:                    7B2BFC9A-4351-4CC0-8A24-3F6077B1BD3F
Sat May 19 19:08:17 2012
panic(cpu 1 caller 0x58c8ec97): NVRM[0/2:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd4000000 0x597c7000 0x096380c1, D0, P3/4
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x51243888 : 0x21b837 (0x5dd7fc 0x512438bc 0x223ce1 0x0)
0x512438d8 : 0x58c8ec97 (0x58ea422c 0x58f14840 0x58eb2f88 0x0)
0x51243978 : 0x58da95db (0x7c4e804 0x747d004 0x100 0x2aa21d)
0x512439c8 : 0x58da05d4 (0x747d004 0x100 0x58217391 0x42)
0x512439f8 : 0x594dd7bb (0x747d004 0x100 0x4bcd2cee 0x5119f218)
0x51243b38 : 0x58dc8258 (0x747d004 0x747b004 0x0 0x0)
0x51243b78 : 0x58c97e2b (0x747d004 0x747b004 0x0 0x0)
0x51243c18 : 0x58c9450a (0x0 0x9 0x0 0x0)
0x51243dc8 : 0x58c963d9 (0x0 0x600d600d 0x702a 0x51243df8)
0x51243e98 : 0x58c2a582 (0xc1d0002f 0xaa910001 0x20802040 0x51243ee0)
0x51243ef8 : 0x50dae57d (0x7d3d400 0x51243f4c 0x0 0x7)
0x51243f58 : 0x50dae71a (0x7d40000 0x50db5e54 0x51243f78 0x2a45c9)
0x51243f78 : 0x230235 (0x7d40000 0x0 0x51243fc8 0x227cea)
0x51243fc8 : 0x2a179c (0x863ea0 0x0 0x10 0x0)
      Kernel Extensions in backtrace (with dependencies):
         com.apple.driver.AGPM(100.12.31)@0x50dab000->0x50db5fff
            dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x57ed1000
            dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x57ef3000
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x5111a000
         com.apple.nvidia.nv50hal(6.3.6)@0x593b2000->0x597c6fff
            dependency: com.apple.NVDAResman(6.3.6)@0x58c28000
         com.apple.NVDAResman(6.3.6)@0x58c28000->0x58f15fff
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x5111a000
            dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x57ef3000
            dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x57ed1000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacBookPro5,1 (Mac-F42D86C8)
System uptime in nanoseconds: 284952138421
unloaded kexts:
com.apple.driver.AppleFileSystemDriver          2.0 (addr 0x579c0000, size 0x12288) - last unloaded 229767652201
loaded kexts:
com.vmware.kext.vmnet          3.0.0 - last loaded 42448227803
com.vmware.kext.vmioplug          3.0.0
com.vmware.kext.vmci          3.0.0
com.vmware.kext.vmx86          3.0.0
com.apple.driver.AppleHWSensor          1.9.3d0
com.apple.filesystems.autofs          2.1.0
com.apple.driver.AGPM          100.12.31
com.apple.driver.AudioAUUC          1.57
com.apple.driver.AppleMikeyHIDDriver          1.2.0
com.apple.driver.AppleIntelPenrynProfile          17
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleUpstreamUserClient          3.5.7
com.apple.driver.AppleMikeyDriver          2.0.5f14
com.apple.driver.AppleHDA          2.0.5f14
com.apple.driver.AudioIPCDriver          1.1.6
com.apple.driver.AppleMCCSControl          1.0.20
com.apple.nvenet          2.0.17
com.apple.driver.SMCMotionSensor          3.0.1d2
com.apple.driver.AppleGraphicsControl          2.10.6
com.apple.GeForce          6.3.6
com.apple.driver.AirPortBrcm43224          428.42.4
com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.0a1
com.apple.driver.AppleLPC          1.5.1
com.apple.kext.AppleSMCLMU          1.5.2d10
com.apple.filesystems.ntfs          3.4
com.apple.driver.AppleUSBTCButtons          201.6
com.apple.driver.AppleUSBTCKeyboard          201.6
com.apple.driver.AppleIRController          303.8
com.apple.BootCache          31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.iokit.SCSITaskUserClient          2.6.8
com.apple.iokit.IOAHCIBlockStorage          1.6.4
com.apple.driver.AppleRTC          1.3.1
com.apple.driver.AppleHPET          1.5
com.apple.driver.AppleAHCIPort          2.1.7
com.apple.driver.AppleFWOHCI          4.7.3
com.apple.driver.AppleUSBHub          4.2.4
com.apple.driver.AppleUSBEHCI          4.2.4
com.apple.driver.AppleUSBOHCI          4.2.0
com.apple.driver.AppleEFINVRAM          1.4.0
com.apple.driver.AppleSmartBatteryManager          160.0.0
com.apple.driver.AppleACPIButtons          1.3.6
com.apple.driver.AppleSMBIOS          1.7
com.apple.driver.AppleACPIEC          1.3.6
com.apple.driver.AppleAPIC          1.4
com.apple.driver.AppleIntelCPUPowerManagementClient          142.6.0
com.apple.security.sandbox          1
com.apple.security.quarantine          0
com.apple.nke.applicationfirewall          2.1.14
com.apple.driver.AppleIntelCPUPowerManagement          142.6.0
com.apple.driver.AppleProfileReadCounterAction          17
com.apple.driver.AppleProfileTimestampAction          10
com.apple.driver.AppleProfileThreadInfoAction          14
com.apple.driver.AppleProfileRegisterStateAction          10
com.apple.driver.AppleProfileKEventAction          10
com.apple.driver.AppleProfileCallstackAction          20
com.apple.iokit.IOSurface          74.2
com.apple.iokit.IOBluetoothSerialManager          2.4.5f3
com.apple.iokit.IOSerialFamily          10.0.3
com.apple.driver.DspFuncLib          2.0.5f14
com.apple.iokit.IOAudioFamily          1.8.3fc2
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.driver.AppleHDAController          2.0.5f14
com.apple.iokit.IOHDAFamily          2.0.5f14
com.apple.iokit.IOFireWireIP          2.0.3
com.apple.iokit.AppleProfileFamily          41
com.apple.iokit.IO80211Family          320.1
com.apple.iokit.IONetworkingFamily          1.10
com.apple.driver.NVSMU          2.2.7
com.apple.driver.IOPlatformPluginFamily          4.7.0a1
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleBacklightExpert          1.0.1
com.apple.driver.AppleSMC          3.1.0d5
com.apple.nvidia.nv50hal          6.3.6
com.apple.NVDAResman          6.3.6
com.apple.iokit.IONDRVSupport          2.2.1
com.apple.iokit.IOGraphicsFamily          2.2.1
com.apple.driver.BroadcomUSBBluetoothHCIController          2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController          2.4.5f3
com.apple.iokit.IOBluetoothFamily          2.4.5f3
com.apple.driver.AppleUSBMultitouch          207.7
com.apple.iokit.IOUSBHIDDriver          4.2.0
com.apple.driver.AppleUSBMergeNub          4.2.4
com.apple.driver.AppleUSBComposite          3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.6.8
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.6
com.apple.iokit.IOCDStorageFamily          1.6.1
com.apple.driver.XsanFilter          402.1
com.apple.iokit.IOAHCISerialATAPI          1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily          2.6.8
com.apple.iokit.IOAHCIFamily          2.0.6
com.apple.iokit.IOFireWireFamily          4.2.6
com.apple.iokit.IOUSBUserClient          4.2.4
com.apple.iokit.IOUSBFamily          4.2.4
com.apple.driver.AppleEFIRuntime          1.4.0
com.apple.iokit.IOHIDFamily          1.6.6
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.TMSafetyNet          6
com.apple.kext.AppleMatch          1.0.0d1
com.apple.driver.DiskImages          289.1
com.apple.iokit.IOStorageFamily          1.6.3
com.apple.driver.AppleACPIPlatform          1.3.6
com.apple.iokit.IOPCIFamily          2.6.5
com.apple.iokit.IOACPIFamily          1.3.0
Model: MacBookPro5,1, BootROM MBP51.007E.B06, 2 processors, Intel Core 2 Duo, 2.8 GHz, 4 GB, SMC 1.33f8
Graphics: NVIDIA GeForce 9600M GT, NVIDIA GeForce 9600M GT, PCIe, 512 MB
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: Hitachi HTS723232L9SA62, 298.09 GB
Serial ATA Device: MATSHITADVD-R   UJ-868
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0x24400000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8213, 0x06110000 / 3
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0x04600000 / 3
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000 / 2
Any Ideas?? Thanks again!
~Mike

Need Help figuring out a percentage formula

Hi, I have a simple percentage formula that i' struggling to figure out.
I need a formula to work out what A7 is as a percentage of the figure in B4. So in other words what 54.66% of £1998.14 is. Does anyone know how to do this?
I need to use the percentage in A7 as part of the formula as the percentage is updated automatically when other values are changed.
The screenshot is below and a link to the screenshot is here in case yo can't see it: https://www.dropbox.com/s/2ji7qdxmh4ymkby/Screen%20shot%202014-10-04%20at%2012.2 2.34.jpg?dl=0
Thanks

Hi alierrett,
Check here:
Simple Percentage Formula Help
It will work in '09 too.
quinn

Need Help Figuring Out How to Access On/Off Field in Upper Left Hand Corner

I am hoping someone can help as I am not at all TECHNICALLY SAVVY!! I must have hit some wrong button yestyerday because now I cannot get access to my messages on my Blackberry Curve. I think it may be because the word OFF appears at the top of the screen on my Blackberry on the far left hand side and I cannot figure out how to access that part of the screen to change it to say ON.

Well, give it a few minutes, and if after 15 minutes no new email messages, Do a simple reboot on the BlackBerry in this manner: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescribed for most glitches and operating system errors, and you will lose no data on the device doing this.
Meanwhile, if you've read or deleted any of the email sent in the interim from your PC, you won't be getting it on your BlackBerry.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Need Help figuring out security sandbox issue after changing webhost

I'm in the process of switching my webhost from 1&1 shared hosting to a dedicated IP address with a smaller company that specializes in Drupal sites and doesn't know much about flash.
1&1 is still the Registrar for my domain, but I've 'parked' YourGods.com on the Holistic servers and have 'pointed' my site to the Holistic DomainNameServers instead of the 1&1 servers.
After doing this, my Flash site (which is based on the Gaia framework) stopped working, and the Flashplayer Debugger, gave me the following errors:
Error: Failed to load policy file from xmlsocket://127.0.0.1:5800
Error: Request for resource at xmlsocket://127.0.0.1:5800 by requestor from http://www.yourgods.com/bin/main.swf has failed because the server cannot be reached.
*** Security Sandbox Violation ***
Connection to 127.0.0.1:5800 halted - not permitted from http://www.yourgods.com/bin/main.swf
Someone helping me on another thread thought 127.0.0.1:5800 might mean the problem had to do with my paths and that I was trying to access something on my local computer, as opposed to being a standard cross-domain issue where one server was trying to access files on another, unrelated server.
Can someone clarify this?
I Googled 127.0.0.1:5800 and found some stuff about loops between a server and the originating computer but I'm really not sure how to put all of this together.
Is there a way (with the flash debugger or other software) to step through my actionscript code with periodic breakpoints so I can figure out what line is causing the problem?
Or a way to figure out if this is a problem between Holistic and my local computer or Holistic and the 1&1 web servers?
Thanks for any help.

Thanks Josh.
I finally tracked this down last night with help from the folks at actionscript.org. I hadn't deactivated my Debugger which runs off of a desktop AIR application - so the server was trying to reach my localhost to run its trace statements. Deactivating the Debugger fixed the problem.

Need Help Figuring Out an Icon

Hello,
I am using a template and I see the following icons next to the comp icon - can you please help me figure out what they are?
Thank you!

One layer is being used as a track matte for another layer. Read up on Track Mattes here.
Track Mattes are one of the very basic things you should know about working with AE. If you don't know what they are, there must be a TON of other useful things you've missed. I would highly recommend that you go through these resources before you do much more in AE. It will help you work with a lot less frustration.

Need help figuring out permissions for a migration project

Hi all
We are in the middle of a migration from various Exchange environments over to a hybrid Exchange 2010 and Office 365 environment. Recently we had to change the setup for migrating mailboxes from on-premise to on-premise using Quest Migration Manager for
Exchange using legacy agents.
Dell documentation says to use the below command in order to give access for the agent to open and import mails from a PST into the target mailbox. But it does not work and only after setting the number 2 command will it work. I cant work out what I need
to do on the database so that I do not need to add permissions manually to all new mailboxes.
Help is greatly appreciated.
Dell:
Get-MailboxDatabase | Add-ADPermission -User <User> -AccessRights GenericAll -ExtendedRights send-as, Receive-As
also at the very beginning I was given this:
Get-Mailbox | Add-MailboxPermission -user Domain\Service Account -AccessRights FullAccess - InheritanceType All
But I cant give every single mailbox this permission. not an option with 20.000+ mailboxes on a global environment.
What fixes the issue:
Add-MailboxPermission -Identity "user" -User "EUECS\euqmmservice" -AccessRights Fullaccess -InheritanceType all
If only i had a cool signature!! ;)

You want to assign rights to that account for all mailboxes in a particular database? Try this (where the database is MB01).
Get-Mailbox -Database MB01 | Add-MailboxPermission -User "EUECS\euqmmservice -AccessRights FullAccess
When you're done you can revoke the rights with the Remove-MailboxPermission cmdlet.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

New MAC book pro-need help figuring out Paraellels

Hey all -yes I have come to the good side but I still need to install Paraellels -since most of my programs right now are windows. SOrry
I have Paraellels installed but how do I tell Paraellels how much space to use the mac HD for windows --I wanna use 15gb for windows --SHould I have partitioned the MAC HD for 15gb to install windows on-
Im on Paraellels now and its asking me to insert eh windows disk but i dont wanna install anything if i need to go back and do something.
Matt

I know that you don't need a separate partition for Parallels to work. Essentially it creates a special file on your computer that acts kind of like a virtual computer when Parallels is running. Windows is actually installed into this file. So to answer your question about partitioning, no, there's no need for a separate partition.
Unfortunately I don't use Parallels so can't help with the rest. The advice in the other reply is your best bet. They'll be more intimately familiar with Parallels over there.

Migrating; same x230, new hard drive. Need help figuring out Lenovo driver package installation

Similar Messages

Maybe you are looking for