Migrating SAP 2004 DB to 2005DB?

Hi,
I want to migrate the SAP 2004 DB to SAP 2005 DB. Is there any difference on the Structure of the DB?.
Regards,
Suresh.G

#1) You should know that 2007 is out in ramp-up so you should consider upgrading to 2007.
#2) You should post your question in the SAP B1 forum in the market place since this forum is for developers and SDK.  Please follow this link:
http://www.sap.com/community/int/forums/ShowForum.epx?ForumID=202

Similar Messages

  • Visual Composer 7.0 on SAP 2004s

    Hi All,
    I have installed SAP 2004s on my server. I also want to install VC 7.0 on this.
    Can anyone let me know whether VC is automatically installed with 2004s or we need to install it seperately? Also, if it it comes with 2004s how can we configure it for use.?
    Where can I find some installation and configuration guides for VC 7.0?
    Thanks in advance.

    Hi all,
    Thanks for the suggestion till now.
    we are currently using 2004s SP6. the inst.  config guide given is for SP8.
    but i can see that some visual composer archive files are already deployed on the server.
    are they enough to start configuring the system? if yes can you tell how to configure the system. can moving to SP8 be useful?
    Already deployed files on the server..
    com.sap.visualcomposer.vcbase.default
    com.sap.visualcomposer.vcflex.default
    com.sap.visualcomposer.vcfrwork.default
    com.sap.visualcomposer.vckitbi.default
    com.sap.visualcomposer.vckitgp.default
    com.sap.visualcomposer.vckitxx.default
    com.sap.visualcomposer.wdext.default

  • Connect to SAP gateway failed during Installatio(SAP 2004s with Oracle10.2)

    Hi,
    I am doing SAP 2004S installation with Oracle10.2
    Oracle installation completed.
    SAP installation completed till step : ABAP post installation (28 out of 43 completed)
    Now I am stuck in Check DDIC Password phase.
    but my problem is not able to start Sap instance.
    dev_rfc.trc says...
    >TS> Mon Jul 13 11:34:02 2009
    T:612 ======> Connect to SAP gateway failed
    Connect_PM  TPNAME=IGS.ANK, GWHOST=INLD50057853A, GWSERV=3301
    LOCATION    CPIC (TCP/IP) on local host
    ERROR       internal error
                (this retcode should be handled by caller of NI-layer)
    TIME        Mon Jul 13 11:34:02 2009
    RELEASE     700
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -8
    MODULE      nixx.c
    LINE        1537
    DETAIL      NiCloseHandle: invalid hdl -1
    COUNTER     12
    >TS> Mon Jul 13 11:35:03 2009
    T:612 ======> Connect to SAP gateway failed
    Connect_PM  TPNAME=IGS.ANK, GWHOST=INLD50057853A, GWSERV=3301
    LOCATION    CPIC (TCP/IP) on local host
    ERROR       internal error
                (this retcode should be handled by caller of NI-layer)
    TIME        Mon Jul 13 11:35:03 2009
    RELEASE     700
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -8
    MODULE      nixx.c
    LINE        1537
    DETAIL      NiCloseHandle: invalid hdl -1
    COUNTER     14
    Could you please let me know what is problem here...where can I adjust gateway if it is the only problem.
    Thanks,
    Regards,
    Ankit Baphna

    also dispatcher log says...
    ue Jul 14 16:31:05 2009
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1611]
    ***LOG Q0K=> DpMsAttach, mscon ( INLD50057853A) [dpxxdisp.c   11163]
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 33
    Release check o.K.
    Tue Jul 14 16:31:45 2009
    ERROR => W0 (pid 5556) died [dpxxdisp.c   13748]
    ERROR => W1 (pid 2768) died [dpxxdisp.c   13748]
    my types changed after wp death/restart 0xbf --> 0xbe
    ERROR => W2 (pid 4376) died [dpxxdisp.c   13748]
    my types changed after wp death/restart 0xbe --> 0xbc
    ERROR => W3 (pid 3708) died [dpxxdisp.c   13748]
    my types changed after wp death/restart 0xbc --> 0xb8
    ERROR => W4 (pid 5392) died [dpxxdisp.c   13748]
    my types changed after wp death/restart 0xb8 --> 0xb0
    ERROR => W5 (pid 1544) died [dpxxdisp.c   13748]
    my types changed after wp death/restart 0xb0 --> 0xa0
    ERROR => W6 (pid 3872) died [dpxxdisp.c   13748]
    my types changed after wp death/restart 0xa0 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    killing W0-5556 (SIGUSR2)
    ERROR => DpWpKill(5556, SIGUSR2) failed [dpxxtool.c   2586]
    killing W1-2768 (SIGUSR2)
    ERROR => DpWpKill(2768, SIGUSR2) failed [dpxxtool.c   2586]
    killing W2-4376 (SIGUSR2)
    ERROR => DpWpKill(4376, SIGUSR2) failed [dpxxtool.c   2586]
    killing W3-3708 (SIGUSR2)
    ERROR => DpWpKill(3708, SIGUSR2) failed [dpxxtool.c   2586]
    killing W4-5392 (SIGUSR2)
    ERROR => DpWpKill(5392, SIGUSR2) failed [dpxxtool.c   2586]
    killing W5-1544 (SIGUSR2)
    ERROR => DpWpKill(1544, SIGUSR2) failed [dpxxtool.c   2586]
    killing W6-3872 (SIGUSR2)
    ERROR => DpWpKill(3872, SIGUSR2) failed [dpxxtool.c   2586]
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=1673
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Tue Jul 14 16:31:55 2009
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Tue Jul 14 11:01:55 2009
    ========================
    and syslog says...
    SAPBasis:MEssage server disconnected
    SAP Gateway closed
    Database error: 1017 at CON
    ORA01017: invalid username/password; logon denied
    Which username is this referring to?
    Regards,
    Ankit Baphna
    Edited by: I041468 on Jul 14, 2009 1:09 PM

  • AddOn installer for C# in SAP 2004

    Hi,
    I have a question. Is there an AddOn Installer for C# in SAP 2004? Or do I have to write it by myself?
    Regards,
    Hmg

    Hi Szymon,
    You can use B1DE package you can donwload for free from SDN. It will create an installer in Vb.NET but it is very easy to adapt the code to C#.
    Regards
    Trinidad.

  • Can we migrate SAP 40B release system from windows NT to windows 2003.

    Hi,
    We want to know can we migrate SAP 40B release system from windows NT to windows 2003 server; if yes, please share with us the OS migration document.
    Regards,
    R Mav

    > Our SAP 4 O B is on windows NT and oracle version is 8.0.5 and wants to do OS migration from NT to win. 2003.
    Neither Oracle 8.0 nor 8i were releases on Windows 2003, they won't work and are not released.
    So I'm afraid the only way you can go is Windows 2000.
    Markus

  • Can i  use B1DE v1.2 for SAP 2004.B ?

    Hi,
    I have installed B1DE v1.2 but dont know it supports SAP 2004.B.
    Regards ,
    Ganesh

    Hi Ganesh,
    B1DE supports SDK 2004, 2005 and 2005 SP01 versions. You have to download the setup corresponding to your version.
    If you are working in 2004B version it should not be a problem, you will have the standard SDK features provided by B1DE. Inside your addon will be included the DI and UI API references corresponding to your installation.
    Please let me know if you find something strange, I haven't heard about any problem with 2004 B version.
    Regards
    Trinidad.

  • Migrating SAP products from a non-SQL Server platform to a SQL Server 2005

    Hi,
    I have another question too.
    Can someone pls provide me the Considerations for Migrating SAP products from a non-SQL Server platform to a SQL Server 2005 platform?
    More specifically from Oracle to SQL 2005.
    Regards
    Abhi

    Hello
    You need to perform an OSDB migration.
    This will involve exporting your SAP system into a DB neutral format and then reloading this into an SQL 2005 SAP system.
    Please review http://service.sap.com/osdbmigration
    I recommend you review the homo/heterogeneous system copy guide for your SAP release.
    Thanks
    N.P.C

  • How to migrate SAP Acript to Smartforms

    Hi All,
    We have requirement to migrate SAP Script to smart form, please suggest how to do this?
    Thanks
    Saurabh

    Hi Saurabh
    Just as some guys said you, u need to run trx SMARTFORMS and then Utilities->Migrate from sapscript or (if you've a release => 47): Utilities->Migration->Import Sapscript form
    But remember: only the sapscript will be imported to the samrtform, so only the layout. All code of program used to manage the sapscript will have to be imported manually.
    Max

  • How to Migrate SAP Scripts to Adobe form

    Hi,
    Can yo uplease tell me step by step how to convert/migrate SAP Script to Adobe forms.
    Thanks,
    Rajeev Gupta

    Hi
    Transforming SAP Scripts - > Smartform -> Adobe Forms is the right way.
    refer this thread...
    [Re: Convert SAP Scripts to Adobe PDF Forms|Re: Convert SAP Scripts to Adobe PDF Forms]
    Regards
    Raj
    Edited by: Rajasekhar Dinavahi on Dec 9, 2008 5:25 AM

  • To migrate SAP business connector scenario to SAP XI.

    Hi,
       I want to migrate my IDoc-http sap bc scenario to sap xi.
    1:What the basic things do i need ?
    2:what basic steps do i need to perform to migrate a sap bc scenario to sap xi?

    Hi Shewta,
    from a BI perspective, please check the HowTo-Papers available in this area.
    You find them at:
    <a href="https://websmp202.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000073641&_SCENARIO=01100035870000000202">SAP Service Marketplace HowTo guides</a>
      Cheers
         SAP NetWeaver 2004s Ramp-Up BI Back Office Team

  • Migrate SAP from DB2 9.5 to DB2 9.7 using System copy

    Hello,
    We are migrating our SAP systems to new hardware and we are also planning to upgrade our database from DB2 9.5 to DB2 9.7. So my question is can we take a db backup of our current SAP system which is on DB2 9.5 and install the target SAP instance directly on DB2 9.7 during the System copy?
    Or do we need to install the target SAP instance on DB2 9.5 and then upgrade the system to DB2 9.7 after the System copy procedure.
    Please let me know as we need to start the migration at the earliest.
    Thanks
    D

    Hi Deepak,
    Yes, that is possible (but only offline backup). But for the new features like reclaimable tablespace (to lower the high watermark)
    it's better to export/import with systemcopy.
    Also with systemcopy you can use index compression.
    After backup and restore you can have also reclaimable tablespace, but you have to create new tablespaces
    and then work with db6conv and online table move to move one tablespace online to the new one.
    Best regards,
    Joachim

  • Migrating SAP Crystal Data from One BO BI 4 to another and on a different domain

    Thank you for reading this and thank you in advance.
    This is pretty new to me, I have installed Crystal Server several times before but never had to do much with it and the person that looked after it left a year ago.
    So I have been tasked to migrate all the data from our current SAP Crystal BO 4 server to another.
    It gets slightly complicated, the company I used to work for was recently acquired and now they want me to move the BO server across to their data-centre on their domain but keeping all the data intact, more the reports not the historical data. I understand that I might have to change a few things but don't want to recreate all the reports and dependencies. At the same time the IT team will now have to look after the reporting.
    The new company doesn't currently have any reporting system in their environment and thus want to use ours going forward.
    I have read several documents and forums but just can't seem to find a method that will do the trick.
    The new BO 4 server is up and running at the same function level/SP as the current production server.
    So I have tried Promotion Management, I added pretty much everything needed, then managed the dependencies and exported without any errors, on the new server I get an error(in the background) straight up when importing, although it sits and spins around for ages but nothing come from it.
    I looked at using Crystal Reports to save the reports and then import them but after speaking to the person that managed it back in the day she advised me its not just as simple as that, there is a few things that needs to be done to make the report work again.
    I read about coping the input data folder and importing the DB directly but figured that would not have a good outcome in the end.
    Is there anyone that had done something similar, or know how to get it across with the least amount of trouble. Even if it's a bit of work as long as I can get it across, that will be great.
    The last resort will be to learn how the entire system works and at least get the reports across but then fix up all the dependencies, schedules etc.
    Just not sure where to start to be honest.
    Thank you again.
    Marius

    Promotion Management is meant to promote small amount of objects. if you need to do complete migration, you can use command line tool of Promotion management.
    Check this link how to promote.
    How to do Live to Live Migration by LCM_CLI.bat

  • Internal Order Migration SAP(OLD Cost Element) -- SAP(New Cost Element)

    Dear Gurus,
    My requirement:-
    (1) Migrate Master Data only for Internal Order which is still open.
    (2) Migrate the actual value which is still open.
    Can anyone tell me if there is any function to do this in SAP without involving ABAP.
    Any suggestion ?

    Hi,
    Good morning and greetings,
    You are migrating from where to where? You can use LSMW or CATT for achieving your requirement without ABAP BDC.
    Please reward points if found useful
    Thanking you
    With kindest regards
    Ramesh Padmanabhan

  • Migrating SAP NetWeaver WebDynpro 7.0 Applications to WebDynpro 7.3/7.4

    Hi,
    We are trying to migrate applications from SAP NetWeaver Portal 7.0 to 7.4. The applications were created using SAP NetWeaver WebDynpro Java 7.0 and we're trying to import the Development Components (DC) using SAP NetWeaver Development Studio CE 7.3. However we're encountering an error after rebuilding and repairing the applications
    Error Details:
    Generation of component ****Comp is terminated with an exception (com.sap.ide.mmservices.wd.general.NoWebDynproContentException: No Web Dynpro content found for project "***". If this project is a Development Component, check if "SapMetamodelWebdynproContent.zip" is present in the classpath.)      [Error: com.sap.ide.webdynpro.generation.eclipse.GenerationEclipse  Thread[Worker-29,5,main]]
    The project was not built since its  built path is incomplete. Cannot find the class for com.sap.mw.jco.JCO$Client.
    The type com.sap.mw.jco.JCO$Client cannot be resolved. It is indirectly referenced from required .class files
    Any ideas regarding the errors?
    thank you.

    Hi,
    thank you all for your replies.
    there are no longer errors anymore before deployment. However, once we deploy we encounter a build error.
    here are the details:
    !ENTRY org.eclipse.ui 4 4 2014-06-18 11:13:00.188
    !MESSAGE java.lang.NullPointerException
    !STACK 0
    java.lang.NullPointerException
      at org.eclipse.ui.internal.decorators.LightweightDecoratorManager$LightweightRunnable.run(LightweightDecoratorManager.java:81)
      at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42)
      at org.eclipse.ui.internal.decorators.LightweightDecoratorManager.decorate(LightweightDecoratorManager.java:365)
      at org.eclipse.ui.internal.decorators.LightweightDecoratorManager.getDecorations(LightweightDecoratorManager.java:347)
      at org.eclipse.ui.internal.decorators.LightweightDecoratorManager.getDecorationResult(LightweightDecoratorManager.java:378)
      at com.sap.ide.tools.core.viewerfwk.ui.tree.wrapper.ProjectWrapper.getTreeNodeLabelText(ProjectWrapper.java:74)
      at com.sap.ide.webdynpro.wdexplorer.tree.WDViewLabelProvider.getText(WDViewLabelProvider.java:98)
      at com.sap.ide.tools.core.viewerfwk.ui.tree.CompoundLabelProvider.getText(CompoundLabelProvider.java:81)
      at org.eclipse.jface.viewers.ViewerComparator.compare(ViewerComparator.java:135)
      at com.sap.ide.tools.core.viewerfwk.ui.tree.CompoundViewerSorter.compare(CompoundViewerSorter.java:77)
      at org.eclipse.jface.viewers.ViewerComparator$1.compare(ViewerComparator.java:187)
      at java.util.Arrays.mergeSort(Arrays.java:1270)
      at java.util.Arrays.mergeSort(Arrays.java:1281)
      at java.util.Arrays.sort(Arrays.java:1210)
      at org.eclipse.jface.viewers.ViewerComparator.sort(ViewerComparator.java:185)
      at org.eclipse.jface.viewers.AbstractTreeViewer.getSortedChildren(AbstractTreeViewer.java:625)
      at org.eclipse.jface.viewers.AbstractTreeViewer.updateChildren(AbstractTreeViewer.java:2578)
      at org.eclipse.jface.viewers.AbstractTreeViewer.internalRefreshStruct(AbstractTreeViewer.java:1863)
      at org.eclipse.jface.viewers.TreeViewer.internalRefreshStruct(TreeViewer.java:716)
      at org.eclipse.jface.viewers.AbstractTreeViewer.internalRefresh(AbstractTreeViewer.java:1838)
      at org.eclipse.jface.viewers.AbstractTreeViewer.internalRefresh(AbstractTreeViewer.java:1794)
      at org.eclipse.jface.viewers.AbstractTreeViewer.internalRefresh(AbstractTreeViewer.java:1780)
      at org.eclipse.jface.viewers.StructuredViewer$7.run(StructuredViewer.java:1457)
      at org.eclipse.jface.viewers.StructuredViewer.preservingSelection(StructuredViewer.java:1392)
      at org.eclipse.jface.viewers.TreeViewer.preservingSelection(TreeViewer.java:402)
      at org.eclipse.jface.viewers.StructuredViewer.preservingSelection(StructuredViewer.java:1353)
      at org.eclipse.jface.viewers.StructuredViewer.refresh(StructuredViewer.java:1455)
      at org.eclipse.jface.viewers.ColumnViewer.refresh(ColumnViewer.java:537)
      at org.eclipse.jface.viewers.StructuredViewer.refresh(StructuredViewer.java:1414)
      at com.sap.ide.dictionary.ddicexplorer.tree.DDICContentProvider$1.run(DDICContentProvider.java:709)
      at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
      at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:134)
      at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:3885)
      at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3506)
      at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2405)
      at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2369)
      at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2221)
      at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:500)
      at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
      at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:493)
      at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
      at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113)
      at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194)
      at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
      at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
      at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368)
      at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
      at java.lang.reflect.Method.invoke(Method.java:597)
      at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559)
      at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514)
      at org.eclipse.equinox.launcher.Main.run(Main.java:1311)
    Do you have any ideas?
    thank you very much!

  • Problems Migrating Entourage 2004 to All-Mac Apps

    Greetings All,
    Background: After careful consideration, I've moved from a Treo 650 and Entourage 2004 scenario to the new iPhone and all-Mac Apps platform.
    It hasn't gone easily: lots of missing, critical data (below).
    I don't understand why thousands of business people aren't posting about this: my data is invaluable, and compromised by chunks of it missing.
    I have now spent about 15 hours researching this, and posted in several Google Groups. It's rather tedious, and I have lots of friendly people answering rather than people with answers. I like friendly people, but seriously, I'd rather have a hostile person who knows how to do this at this point.
    I have read in several places of the scripts of a Paul Berkowitz called "Export-Import Entourage 1310," but the documentation provided doesn't make clear these issues are addressed.
    I have written (five times) Mark/Space regarding their Missing Sync for the iPhone, but they have reading-comprehension issues, and I'm still not clear if they can get the notes from either my old Treo 650 via it into my iPhone.
    Here is what is missing:
    a) Can Paul's scripts (or anyone's!) re-export/merge Contacts such
    that categorized/grouped are preserved? This is of great importance.
    b) Will it export Entourage's notes, and will they be
    correctly titled, and in a useful place on the iPhone? (I have about
    400 notes), again categorized?
    c) Any way to export my Entourage filters/rules to Apple's Mail?
    d) Any way to export the large mailing lists (groups) I had in
    Entourage to Apple's Mail?
    Thank you in advance for your informed answers, and I must say that this has been as annoying as Apple thinking we can't figure that when AT&T raised the rates, the savings on the new phone was wiped out.
    Think Better, Apple. If you're trying to get us to use your platform, document how to make the switch.
    Thanks,
    km

    To repost from elsewhere:
    Well, no one at MarkSpace or MS could fix it.
    I did. I figured it out. 30 hours of Groups, trial and error, and then, a Eureka, elegant moment.
    20 minutes for the poor sap trying to get their data out of Entourage/their Treo.
    Now who is going to pay me?
    k

Maybe you are looking for