Migrating security from 11.1.1.3 to 11.1.2.2 and EIS Export issue in 11.1.2.2
Hello All,
We are currently using Hyperion 11.1.1.3 on Windows Server 2003 Ent. Edn. 32 bit.
Now we are planning to upgrade to 11.1.2.2 but we are doing a fresh install because we are upgrading OS also to 2008R2 Server 64 bit.
1. For Testing purpose we have installed and configured successfully on Windows Server 2008 R2 64bit.
For Security migration: I just exported security in 11.1.1.3 and imported to 11.1.2.2, migration status showing as "Failed"
But usres are migrated to 11.1.2.2.
Can you please let me know how to perfrom security migration from 11.1.1.3 to 11.1.2.2
Error
Error in migrating artifact, "/Native Directory/Users".
EPMCSS-02614: Failed to get user by identity native://nvid=911?USER. User not found. Verify Native user directory configuration.
Error in migrating artifact, "/Native Directory/Users".
EPMCSS-02614: Failed to get user by identity native://nvid=aa9322e19afe6bf1:-4bf27cb6:12ff20cff91:3cfa?USER. User not found. Verify Native user directory configuration.
Error in migrating artifact, "/Native Directory/Users".
EPMIE-00020: Failed to update user brobinson during import. Invalid identity for user. Please ensure that the user is available in the system with the identity specified in the import file.
2. Another known issue with EIS Import/Export option with 2008R2 64bit Server.
Can you please let me know is there any workaround for this?
Thanks,
Prathap
Have a read of the following support doc - "Migrating Native Users and Groups Via Lifecycle Management (LCM) Fails (Doc ID 1379619.1)"
For EIS you can install on 32bit OS and then you should be able to export/import, then you can point the 64bit to the relational db, alternatively it may be possible to point to the existing db as I doubt anything much has changed with the EIS database structure between those versions.
Cheers
John
http://john-goodwin.blogspot.com/
Similar Messages
-
How to migrate security from 1 bobj instance to another
Hi ,
I have a requirement
how to migrate security from 1 bobj instance to another
Please help me for the same .
Regards,
AbhishekAre you using Win AD groups or Enterprise groups to apply security?
What is the BO version of source and Destination? -
I migrated everything from my Snow Leopard iMac to my new Lion iMac and now when I launch anything in CS5 like Photoshop the Adobe Manager pops up and wants my serial numbers or to start a trial version. I don't have my CS5 serial numbers but wouldn't they migrate over with everything else?
but wouldn't they migrate over with everything else?
Are these PowerPC apps that ran on Rosetta with Snow Leopared?
If so you need to read these articles...
Lion upgrade questions and answers: Apple Support Communities
What applications are not compatible with Mac OS X 10.7 "Lion"? What upgrade or substitute options are available for common incompatible applications? @ EveryMac.com -
Migrating Security from Native to External Authentication mode Servers
Hi All,
I am migrating applications from V7, V9 (doesn't use Shared services) to V11 (Shared Services Enabled) Essbase server.
I am able to migrate the application definition using the Application Migration Wizard.
Take level-0 export from the source server & load on the target server & do the default-calc or series of custom calcs depending upon the application's maintenance process.
Using the Application Migration wizard, we can also migrate security only if both Source & Target servers use Native Authentication mode.
This can be ruled out in my case as only Sources are native & Target is Shared services enabled.
Here are few tools available to do bulk provisioning on a Shared Services enabled Essbase application -
1. MAXL - Works great - But too tedious to create the MAXL statements based on the security definitions on the Source servers.
2. CSS Import-Export utility - I heard it works only when both Source & Target are Shared services enabled. Can this be used for my case. Also heard many didn't find success with this one.
3. LCM - Not sure if this can be used for security.
Are there any other utilities?
Has anyone done similar migrations before? Please let me know the best practice to do this.
Appreciate your thoughts.
-Ethan.It is much easier to go about that method, it is not always 100% successful with groups/users but gets most done.
If you are past that stage then maybe try using the advanced security manager to extract security from your source environment.
Then you could use the CSSImportExport Utility, first create a template from the information you extracted from your source and then run use the utility to provision users in the new environment.
There are obviously other ways but that is the way I would prefer if using Shared services security.
Cheers
John
http://john-goodwin.blogspot.com/ -
Unable to connect to environment after migrating Security from BPC 7.5 to BPC 10.1
Hi Experts,
We are working on BPC 7.5 to BPC 10.1 NW migration and after migrating the environment, we are unable to connect to environment.
While trying to access, we are getting the following error:
After taking a backup of the necessary environment in BPC 7.5 NW we are carrying out the 2 steps in the BPC 10.1 NW box:
Step 1 : Tcode UJBR - Restore the environment in BPC 10.1
Results: This is working fine.
Step 2: Program UJT_MIGRATE_75_TO_101 - Running the migration utility in BPC 10.1 to make the objects compatible with BPC.
2.1 Execute without Security Mapping
Results:
This is working fine. We are able to connect to the Environment and access the dimensions and models.
2.2 Execute with only Security Mapping
Results:
After this step, we are not able to access the environments and are getting the Logon error.
cannot get model "" in environment "xxxxxx" from Admin module
The logon attempt failed; contact your administrator.
If you have any options to resolve this error, it would be great.
Else, we will have to re-build the entire security design manually.
Regards,
Sushant PradhanHi Andy,
Thanks for your response. Yes, my id has SAP_ALL authorization.
Still unable to access the environment after migrating security.
To make things less complicated, we went back to BPC 7.5 NW - deleted all unwanted user ids, we kept only 3 user ids. Then, we took backup of application set and restored it in BPC 10.1.
We created a mapping file of those 3 user ids in BPC 10.1 as NW user ids and executed the Migration utility. Again we have same error.
Regards,
Sushant Pradhan. -
Error migrating Security from Shared Services.
Hi,
I was using Hyperion Planning 9.3.1's in Import/ Export utility in D:\Hyperion\common\utilities\CSSImportExportUtility\cssimportexport\importexport\CSSExport.bat. I'm trying to export Security from Shared Services into xml format. I get the following error message:
Malformed \uxxxx encoding
Anyone with similar experiences? Hyperion's impexp.pdf makes the steps so complicated!!Answering my own question:
Since I am in Windows, I was using backslashes in my paths when I updated file:
importexport.properties
The error went away after I changed the backslashes to forward slashes in all paths. -
I've followed the on-site directions for this migration ("migrate from another browser") but my only options via that route are Safari and Chrome.
Export bookmarks from camino using the instructions at http://caminobrowser.org/documentation/bookmarks/#export .
Then import the html file into firefox using the instructions in the [[Import Bookmarks from a HTML file]] article.
Does that fix the problem? -
Migrate security from production to test platform
Is there a method by which security that exists on production platform, can be migrated back to the test platform (groups, users & passwords, and application filters)?Thanks
HiThere is a security utility available on this website, that allows for importing and exporting all security etc.This is the simplest way to complete.Hope this helps.Andy Kingwww.analitica.biz
-
Working from Several Hard Drives and having Export Issues
Hi there,
I'm doing some assistant editing work for a client, and he's been editing off of several hard drives: a 4Tb G-Drive, a 500gb USB drive, and his Macbook. Media is distributed across these three sources, and when he's tried to export his hour-long project, Premiere will get about ninety percent of the way there and then crash with a "serious error."
My guess is that all of the clips will need to be media managed, and placed onto a single drive. He's also done something very strange, which you can view in the image below. When you open up the G-Drive, there's the icon for the second attached drive (the one called "drone projects/archival").
Any thoughts?Drag the folder or drive into the open iTunes window; iTunes will then add everything it can use to the current iTunes library, and will copy them if that option is set in the preferences, which it is by default on a Mac.
(34243) -
Migrating Jobs from 4.0 to 4.2 using .atl?
Hi Experts
We recently migrated most of our BODS application from v4.0 to v4.2.
We used Repository manager to upgrade our repositories.
We still have one machine which is running BODS 4.0.
My question is that is it possible to migrate jobs from v4.0 to v4.2 without using repository manager i.e exporting these jobs as .atl or xml file and then importing them into BODS 4.2 enviornment.
Please let me know your views.
Thank you.Hi Ankit,
Possible? yes.
Suggested? No.
Try to follow the best practice in order to avoid issues, because if you have a problem during the migration and you call SAP support, they will tell you to follow the standar steps, not the short cut ways. -
Hello
i have two IP C350 running ios version 6.5, in a cluster mode and would need to know what would be the best (and quickest) way to replace existing units and migrate current configuration from both IPs and have established cluster again.
Old IPs are C350, running AsyncOS 6.5.3-007. New units are two C370, running IOS AsyncOS 7.6.1
If there is any how-to with steps required that you guys are aware of and would like to share would be awesome.
Appreciated.I have completed upgraded of the one ironport out of two. I had issues with clustering since i run upgrade from the GUI (GUI inform you that it would need to disconnect the unit from the cluster in order to perform the upgrade).
Answering Yes to this the upgrade starts and finishes with no issue. But when you try to migrate config from old unit to the new unit, whole bunch of messages pops out related to cluster, ports, Ethernet, etc. And i put netwrok config part from new unit to the config.
The CLI at the old unit shows that unit is disconnected from the cluster and not removed, so command to remove the unit from the cluster was issued. After reboot, i export the config from the old unit, made changes to the network part (ports, ethernet, MAC address) and import the config into new unit with no issues.
Now, i have one new unit handling email and one old unit waiting for replacement. No cluster existis between these units at this point.
So, for second unit, i will do:
from CLI remove old unit from the cluster.
run the upgrade
reboot
export configuration and make changes to the network part.
import config to the new unit and cross fingers (the cross finger method works very well from time to time).
recreate a cluster.
Will update the thread once all is done. -
Migration data from SAP DB2 to Oracle 10g
Hi , I am assigned to migrate data from SAP system which is using DB2 to Oracle 10g.I not very familiar with SAP. I hope someone can help me., especially for those familiar in SAP.
Please help me.
thanks
jebatcoHello,
just migrating a DB2 database to Oracle 10g might be an easy task. The Oracle Migration Workbench is the tool for such a migration:
http://www.oracle.com/technology/tech/migration/workbench/index.html
I have no idea about SAP, and that might complicate the picture. But there exist specialists for this task:
Oracle Expertise in the SAP environment
The Solution Center SAP Support and Service – located in Walldorf – offers SAP
customers the following services:
• Advanced Customer Services (ACS)
• Performance Analysis and Tuning
• Development of concepts for Backup/Restore/Recovery, and High Availability,
Administration
• Security concepts
• Optimizing of ABAP/4 programs (performance improvement)
• Migration service for customers, who want to use Oracle as the database for SAP
applications (from Informix, MaxDB, DB2, or SQL Server to Oracle).
• Migration services from “Oracle to Oracle” (e.g. Tru64 to HP_UX)
• Integration-Products and –Services
• Oracle Database: The Database of Choice for Deploying SAP Solutions
This is taken from http://www.oracle.com/newsletters/sap/docs/ora4sap-db-of-choice.090213.pdf
Best regards
Wolfgang -
I'm trying to upgrade 5.2 to 6.3.
I tried to do a test migration by copying the production ldap instance folder into the test server. The test server doesn't have 5.2 installed, just the instance directory I copied from production. When I use dsmig to migrate the security settings, I was prompted for the old certificate database password:
root@ldaptest-c:/opt/SUNWdsee/ds6/bin# !257
./dsmig migrate-security -v -p 389 -P 636 /opt/ldap/serverroot/slapd-salt /opt/ldapdata/salt
Backing up file (/opt/ldapdata/salt/migration/migration_status) ..... DONE.
Launching Security Migration of server instance /opt/ldap/serverroot/slapd-salt .....
Stopping server instance /opt/ldapdata/salt ..... Directory Server instance '/opt/ldapdata/salt' is not running
Enter the old certificate database password:
Certificate database password has not been stored.
/opt/SUNWdsee/ds6/bin/dsadm exited with error 11.
Operation "migrate-security" failed.
The person who setup the old instance didn't remember setting up a certicate password and I can't find any information regarding this on the migration manual.
I also tried setting up a fully working 5.2 instance by copying 99user.ldif from the old server, use db2ldif and dump the data, and loading it. When I tried to migrate the fully working 5.2 instance, it didn't prompt for the password.
Is the password prompt normal since the production instance wasn't originally installed on the test server?
thx,
mikeHi,
I've got exactly the same problem. Has anybody a solution?
What have you done mliang2?
Tobi -
Migrating Security In Oracle BI 11g - Project Amelia
We'd like to introduce an open source project that assists with the migration of basic security from an OBI 11g (FMW) source environment to a target environment. The project generates a WLST script that executes a security artifact migration process. It is also great for creating an inventory of application roles and principal assignments that can be used in project documentation.
This is a perfect tool for upgrades from OBI 10g to OBI 11g.
Advanced users should have no problem testing and running the solution. Please provide feedback or potentially consider contributing to the project.
The project page can be found here,
http://amelia.artofbi.com/
The project code can be downloaded from here,
https://github.com/artofbi/Oracle-FMW-Amelia
The first post and description of the project can be found here,
http://www.artofbi.com/index.php/2011/09/introducing-project-amelia-easier-migration-of-obi-11g-security/
This project was originally designed to provide a quicker mechanism for migrating Oracle BI 11g security. It clearly has a resounding place in other OPSS based FMW applications. Project Amelia is a new open source project to assist with migrating and documenting Policy Store Security in Oracle Fusion Middleware, specifically for but not limited to Oracle Business Intelligence 11g. The project contains the core scripts and binary files required for utilization in any Java ready Operating System.
The project is released under the Apache License 2.0 which means it is free to use, free to share, and free to copy.
Please feel free to leave any comments or questions in the forum thread.
Cheers,
Christian
http://www.artofbi.comCheck this http://www.rittmanmead.com/2011/02/obiee-11g-migrations/
and http://docs.oracle.com/cd/E23943_01/doc.1111/e15722/toc.htm -
Essbase migration procedure from Unix to NT
Does anyone have a procedure to migrate essbase from unix to wondows NT? I know that is a procedure in installation guide Ch.10, but I think it is just for the NT to NT..
we did this last year. export the data from the databases to a text file, use level 0 if you only load at level 0.after installing essbase on nt, add the same name apps and dbs in nt, connect to the unix & nt servers in appman, copy the outlines/dbs from unix to nt. load the data from your exports.copy all the object files eg .csc, .rpt, etc from the unix server, reset all server, app and db settings, including cfg file and recalc.we recreated security ids, groups and filters
Maybe you are looking for
-
Woke up to my iPhone 4 being completely blank. I've tried restarting and resetting it as well as charging it and plugging into my computer. Can anyone shed some light as to what may be wrong or how to fix it? Thanks
-
My playlist is not playing properly
Hey everyone, I hope someone can help me out with a problem I am having with my iTunes playlist. Every time I play my songs they aren't clear...it is like the song is skipping or there is static. Anyone know what's up with it? Windows XP
-
How to Disable SSLv2 in Oracle IAS 10.1.3
How to disable SSLV2 in Oracle IAS 10.1.3.. I added below in ssl.conf file.. But it is not working... SSLProtocol -ALL SSLv3 TLSv1 SSLCipherSuite ALL:!aNULL:!ADH:!eNULL:!LOW:!EXP:RC4+RSA:+HIGH:+MEDIUM Thanks Lalitha
-
How Can I obtain the tables of one schema and the record size???
How Can I obtain the tables of one schema and the record size??? Example: TableName Record Size Tabla1 12500 Tabla2 7800 Tabla3 2046
-
Where to configure user from which email notifications are sent
Hi, If a user, by mistake, has sent an email to an undefined email recipient, the CRM system will send an email back to that sender, saying the status of the message is undelivered & the the error (for ex. undefined recipient). There should be a plac