Migrating SP 2007 site which is using the template Project Workspace (Id 6215) to SP 2013

Hi,
We have our SharePoint 2007 with project server installed on it. It is only one server having all of the components including SQL server and SP 2007. We are planning to migrate one of the site which is using the
Project Workspace Template(Id 6215) to the SP 2013 environment using Database
Attach Method.
Questions:
1) Is there any workaround available we can migrate the site to SP 2013 without
installing project server?
2) If there is no other workaround, we may need the justification or supports articles to share with our management.
Looking forward to hearing from you guys.
Regards,
Zulfiqar

Hi,
According to your description, my understanding is that the error occurred when you tested the database.
I recommend to check if the site template exists in the folder located at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\1033\XML.
If yes, then restart the SharePoint machine and run the PowerShell command Test-SPContentDatabase again.
If not, please re-install the template to see if the issue still occurs.
If the sites with issue are no longer needed, then you can delete the sites with issue. Or you can
rename the site template with a standard template id.
More references:
http://www.sharepointnadeem.com/2014/01/sharepoint-2013-missingsitedefinition.html
http://red1s.wordpress.com/2012/08/16/sharepoint-2010-missing-site-definition-error/
http://sharepointgeorge.com/2009/upgrading-content-db-sharepoint-2010-part-1-preupgradecheck/
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Similar Messages

Fatal Error: Could not find Feature AnalyticsLinks in sharepoint 2010 while migration from 2007 site using stsadm command

Fatal Error: Could not find Feature AnalyticsLinks in sharepoint 2010 while migration from 2007 site using stsadm command

Hi ,
Firstly, I need to verify the followings:
Whether you created a feature called AnalyticsLinks and activatated it at SharePoint 2007 site.
Whether you installed the feature at SharePoint 2010 site.
Please deactivate the feature AnalyticsLinks, then migrate SharePoint 2007 site to SharePoint 2010, compare the result.
Also , please check whether you have installed the feature AnalyticsLinks at your SharePoint 2010 site. If not, please install and activate it, compare the result.
Here are some similar posts for you to take a look at:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/17b17bd3-126c-44d4-bd58-38dd613017a0/fatal-error-could-not-find-feature-reviewpublishingspd1055?forum=sharepointadminprevious
http://mrin17.wordpress.com/2009/09/15/fatalerror-could-not-find-feature-s2siteadmin-while-importing-sites-from-different-server-at-sharepoint/
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

I'm getting an error message "Untrusted Connection" on my on-line bankig site which I use all the time. Now I can't access the site.

This "Untrusted Connection" is coming up when I try to access my on-line banking site which I use all the time. I also get a OpenDNS message about Phishing and I'm not sure why or what that is. The same thing is happening on my laptop which has Windows 7.

Did this and it now works.........and I was blaming firefox!!!!!
ESET: setup -> advanced setup -> extend web and email tree -> SSL
• SSL protocol: Do not scan SSL protocol

Using the Template of one site for another site.

Hi,
I have created and published Site A using a template (DW CS4). I now wish to create Site B and use the same template from the Site A.
The only thing which will change is the banner which I create in Photoshop for each site.
I also wish to use the navigation buttons which were part of Site A's template. Can this be done?
One note: all the files from Site A have been copied into Site B.
Any help is greatly appreciated.
Frank

One note: all the files from Site A have been copied into Site B.
Including the template? If so, then blast ahead. Things should work fine.

How to determine which locale uses the specific process

Hi,
I would like to get to know which locale uses the specific process.
I mean that when the process starts it should use the current system locale.
Where I can check that information which locale are used by the running process?
I ask because I would like to make sure that for example when the locale are French or Japanese the process/deamon use the current locale.
Kind regards,
Daniel

VivaLaVida wrote:
Hi,
currently we are in the process of consolidating our databases. One of the neccessary steps is to figure out which user connects to the database at all. That's easy, we implemented a logon-trigger and log the collected information into a separate table.It could have been even easier by turning on the built-in audit feature.
If a user with objects (e.g. tables, views, procedures) exists - but this user never connects to the database - does that automatically mean that these objects are not used at all? No need to say that this is not true. But how can we figure out if a connected user has selected an object of this user?audit would be a good choice.
Our porblem is that we have alot of schemas in our database - but the developers don't know if this schema is not used by an application or not (sad but true).Not sure what developer will do with used/not used application.
To enable auditing would be one choice to figure out if an object was ever used or not. What's wrong in auditing ?
Even though audit may have a footprint on performance, that would probably be less costly than any custom solution.
Nicolas.

I need to erase all content and settings from old iPhone 4s. Will doing so affect new iPhone 6 which is using the same iCloud account and Apple ID?

I need to erase all the content and settings from old iPhone 4s. Will doing so affect content on new iPhone 6 which is using the same iCloud account and Apple ID?

No, it will not affect the iPhone 6 content if you wipe the old iPhone 4s.

Which programs use the memory card?

Can anyone help me determine which programs use the memory card? My E90 won't connect in transfer mode because Pc Suite says there is an application using it. As far as I'm concerned, active notes and sms were the ones to blame. They specifically have the option to use the memory card. But I can't find it in other apps. Any suggestions will be appreciated.

Various installed programs will run from your MMC in the background. I suggest you install and app called Best Taskman from www.symbianware.com.
Install this to your phone memory!
Now open it up, press options - view - advanced - processes
you will see all running processes and an icon next to them. If th icon looks like a memory card, then it is running from that. Press the "C" key on each MMC running process to close them.
Now you'll be able to connect via mass storage.
I recommend making a note of which apps these are and re-installing them to your phone memory instead. Also, any app you know will have a feature required to tun in the background, ensure this is installed on the phones memory!
If I have helped you, please hit the star at the bottom of my posts - it's appreciated!
Don't forget if your problem is solved to press the "Accept as Solution" button.

How can I use the templates I generated in CS5 Bridge, in Lightroom 4.4?

How can I use the templates I generated in CS5 Bridge, in Lightroom 4.4 ?
It appears that I can not link the templates which I have been using in Bridge for some time to Lightroom 4.4.
Is this done on purpose?
Thanks in advance
Doppy

I assume these are metadata templates?
in Bridge, apply a template to an image which has no other metadata (eg a dummy image ) and then import the image into Lightroom, ensuring no metadata applied in the Import dialog. Now in Lightroom's Metadata panel, save the metadata as a new Metadata Preset.
Repeat for each template.

Translating a report which is using excel template

Hello,
We are working on a BI report using excel template. I've checked the report designer's user guide and it says template translation is a feature only supporting RTF and BI publisher layout template.
I am wondering what is the best practice for translating a report which is using excel template.
So far I have a alternative which is making all labels in my template dynamically getting values from HCM lookups , but this solution is time consuming.
Could anybody help here?
Regards
Buyun

Did you try reading sap help files which clearly explains about Managing templates, selecting templates, creating templates, deleting templates.
[Managing Templates in ALV|http://help.sap.com/saphelp_apo/helpdata/en/d4/a2a138198daa2fe10000009b38f842/content.htm]
This will provide you a clear picturesque on handling templates in ALV.
Edited by: K.Manas on Dec 22, 2010 9:13 AM

Problems using the template feature in CS3

Hi Everyone
Appreciation in advance to anyone trying to help me out, as I am a little lost to say the least...
Firstly the website I'm talking about it www.handbakedarcade.co.uk
I recently re-built the site using the template feature on dreamweaver as I have a lot of pages and all have the same general layout with just one large editable region in the main section of each page. The trouble I'm having is that when i change the template (named TEMPLATE3.dwt) and then re-upload it as well as the pages that are dependent on it the changes are not seen. The problem is simple, I will try and prepare for the answer not to be!
Thanks again, Tom

We'll give this another try:
Tom,
Looking at the page you linked it - it doesn't show any template markup at all. There are no editable or non-editable regions showing in the code.
The actual master template (the dwt file) does not have to be uploaded to the server. Once you make changes to a template, the changes flow through to all the child pages associated with the template and these are the files that need to be uploaded.    You can upload the templates folder to the remote if you wish to keep a copy as a backup, but it makes no difference to the associated with it.
Not sure what's happened to you page, as Nancy pointed out the opening and closing <body> tags are missing.
I have created an ID for the outer div so that we can give it some styles so that it is centered on the page and also that the content within the wrapper are centered.
Copy and paste the following code in a new DW document and see the differences between your original code (the page that you linked to) and the code below.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>HAND BAKED ARCADE AT BRAINDROP, HIDDEN</title>
</head>
<style type="text/css">

</style>
<script type="text/javascript">

</script>
</head>
<body>
<div id="wrapper">
<img src="nextinstallation.jpg" width="900" height="59" />
<a href="index2.html" target="_self"><img src="http://i57.photobucket.com/albums/g208/handbaked/scala_web_back.gif" width="390" height="551" border="0" /></a>
</div> 
</body>
</html>

How can I use the templates in iPhoto to email my photos if I don't have a mobileMe account?

I have upgraded to iLife11 and want to use the cool templates to email photos. I don't have a mobileme account. It doesn't appear that I can Use the templates. Am I doing something wrong?

What do you mean by the AOL screen? Is AOL your ISP? If it is popping up to connect you to the internet that might be what is preventing you from composing an email. It also could be that AOL was set up as your default email client. Do you use AOL as an ISP/Email client?
In Mac OS X Lion (I can't vouch for any other version of Mac OS) to change your default mail viewer/client open up apple's mail app. Go to file->settings Under the general tab it's the top choice if it is set to AOL, you might want to switch it so you can get it to come up with the email you actually use. Also if you do use AOL, they should have a section in their help about setting up "pop3" email, or how to use AOL mail in outlook. Now the steps might not be the same as far as what menu choices you have to make, but what you're gonna get out of that section is incomming/out going server's and anything else like ports and etc. Apple's mail app needs all that same information.

I have Pages 09 and I have created a business card using the template but can't figure out how to duplicate it to the other 9 on the page Am and sure I am going to look daft coz its only the click of a button but I can't work it out Thanks

I have Pages 09 and I have created a business card using the template but can't figure out how to duplicate it to the other 9 spaces on the page. I am and sure I am going to look daft coz its only the click of a button but I can't work it out Thanks

I do the following: Hold down the command key and highlight all the items to be reproduced. Then hold down option and drag the items from the first to each subsequent card.

Error when using the template installer MI post installation process

Hi all,
I am busy to configure the Netweaver Administrator in order to create setup packages for mobile devices. This is a WAS 6.40 ABAP JAVA instance with mobile infrastructure.
I have installed the netweaver SR1 and upgraded abap and java to SPS18 afterwards.
Afterwards I used the template installer, I executed: MI post installation process.
But when I did this an error message occured on the following node:
step ID 8 registering RFC connection.
Error message:
Element
'SAPConfigLib.<SID>.Unclassified.set_Server_Service':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException:
<--Localization failed:
ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle',
ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments:
[]--> : Can't find resource for bundle java.util.PropertyResourceBundle, key
com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!179-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.89
-:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41 Element 'SAPConfigLib.<SID>.Unclassified.set_Server_Service':Error during executing Java Reflection:JCO.Client not connected in repository call
Here after I followed manual: MI25 SPS18 inst newtech.pdf for configuring the NWA.
I checked the complete manual, but still the error message occurs, when I am using the template installer.
There is one more thing.
When I go to the NWA, to the Mobile Infrastructure node, allmost all subnodes give me the following error:
(For instance on hierarchy grouping:)
Failed to get hierarchy group elements from middleware. Reason: Could not connect to middleware.
Does this error message relate to the other error message?
Please give me advise/hints/directions to solve this problem....
Your help will be appreciated!
Best regards,
Jacco Raymakers

I got error during use of template installer in NWA. It is MI post installation in N/w2004s SP09
Error message:
Element
'SAPConfigLib.<SID>.Unclassified.set_Server_Service':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException:
<--Localization failed:
ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle',
ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments:
[]--> : Can't find resource for bundle java.util.PropertyResourceBundle, key
com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!179-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.89
-:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41 Element 'SAPConfigLib.<SID>.Unclassified.set_Server_Service':Error during executing Java Reflection:JCO.Client not connected in repository call
Please help me the resolve this.

Why does my Pages version 5 (Mavericks) quit unexpectedly when trying to use the template styles?

Nearly every time I try to use the template styling in the "Format" pane, the app will crash with the message saying "Pages quite unexpectedly".
By 'Template Styling' I mean Paragraph Styling, Character Styling, Bullets & Lists etc...
I only just bought this Mac so I have never had Pages '09 on it.
Please advise.
Thanks

I'm having this exact same issue. I suspect in my case it's an issue having to do with importing a Word document. Just to be on the safe side I ran through the validation of all of my installed fonts. They all checked out ok. As with @kuroshb I'm using the latest version of Pages on a brand new Mac.
It doesn't matter what style I select, the application quits. An example would include a body style of Arial Narrow Regular 15pt black. That's defined as a style. When I select that style the application quits.
How do I determine if the document is using another font other than what's already in Font Book?

Can I use the albums/project/folders in Aperture to display photo's with Apple TV ?

Can I use the albums/project/folders in Aperture to display photo's with Apple TV on my TV?

Yes, select the photos you want to share via the iTunes advanced menu.

Migrating SP 2007 site which is using the template Project Workspace (Id 6215) to SP 2013

Similar Messages

Maybe you are looking for