Migrating standard cube to hana optimize cube trigger Error

HI ,All :
referance to HANA information ,it can use T_code : rsmigrhanadb or use program :RSDRI_CONVERT_CUBE_TO_INMEMORY to migrate.but execute to t_code ,trigger some errors , as follow :
Workbench Environment : NW 7.4 SP 6 .
SAP_BW
740
0006
SAPKW74006
SAP 业务仓库
740
0006
SAPKB74006
SAP 基础组件
ST-PI
2008_1_710
0009
SAPKITLRE9
SAP 解决方案工具插件
Who encountered this problem, please share your solution？please ，sharing ! Thanks !

Hi,
You need to use RSDU_TABLE_CONSISTENCY(store issues and repair).
Also look at note 1957634 - Conversion to SAP HANA-optimized InfoCube fails

Similar Messages

SAP BW on HANA: Error when migrating standard cube to the In-Memory Cube

Hello,
When migrating an standard infocube from a recently migrated BW to BW on HANA in-memory optimized cube, there is an error, for all the cubes.
Implemented few notes, though luck yet. Appreciate if those, who saw and resolved it can help.
Error while executing stored procedure for data implementation
Message no. RSDRI_HDB041
Diagnosis
The InfoCube data to be migrated is processed using a stored procedure. This procedure reported an error.
System Response
Error code: 257
Error text: sql syntax error: line 1 col 14 (at pos 14)
Regards
Manish Madhav

Hi Mahish,
I see this post is from March. I understand you have got some solution to it already.
If yes, could you please share the solution.
Thanks and regards,
Aaloka

Migrated Standard content fails to load to Cube

Hello,
We have migrated standard content from 3.5 to 7.0 and we were able to load data from the DataSource to the PSA, however we can not seem to get the data from the PSA to load to the cube. (we are working with 0FI_AA_C04 and DataSource 0FI_AA_001).
The load fails. The error message is:
     Error in substep
     The argument 'USD' cannot be interpreted as a number
     Exception CX_RS_STEP_FAILED logged
We are running at ServicePack 8 will updating to ServicePack 9 resolve this issue?

Manga,
Thanks foryour quick responce, in order to trouble shoot this issue I have removed all mapping for all but one key figure and figured if i could figure it out for the one then I would beavle to apply to the rest. Currently I only have 0CACQ_VL_YR mapped and the Rule Details are as follows:
Targt InfoObjct: 0CACQ_VL_YR
Rule Type: Direct Assignment
Aggregation: Summation
Currency
Target Currency: 0CURRENCY
Currency: from Source
Source Currency: 0CURRENCY
Source Fields of Rule (standard no changes made)
Target Fields of Rule (Standard no changes made)
So I am unsure what to check every thing looks in order and seems to match what worked in the 3.5 Update Rule
Thanks
Mike

Transport error of request Standard Infocube to HANA Optimised Infocube migration

Hi ,
Migration of Standard info cube to Hana optimized info cube done successfully in Dev System,but while transporting that request in PRD system
error was coming and error log as follows-

Hi Herman,
Thanks for reply.Is there any SAP note or document for this steps?
My scenario system Landscape like BW DEV-BW PRD.
Our both BW System were on Oracle DB. We have migrated oracle DB to HANA DB .
PRD system infocube have 7 year of data and infocube is Standard Infocube.So we want to migrate all standard infocube to HANA optimized .
Regards,
Rajesh Behera

Opening standard cubes in SAP BW

Hi all,
I'm new at SAP BW and I'm trying to start the load of a standard cube (the example is 0OPA_C02).
I've added the infopackage with datasource (0CO_OM_OPA_4) but in fact I don't know if this is correct and according with best practices.
Also, I believe is necessary to create a DTP but When I try to create it creates automatically a new transformation and doesn't use the standard one.
What am I doing wrong?
Regards

Actually you are facing the DTP problem just because one transformation is missing (TRCS) which I mentioned before. First of all let me know when you installed the cube which option did you choose "Data Flow before or Only Necessary Objects"? Coz when you are creating the transformations by your own, it means you havn't installed the update rules or (in 7.x architecture) Transformations. Also when you cannot find the transformation TRCS it is most probably your data source is 3.x and you are trying to implement 7.x data flow on it. To verify that kindly right click on your datasource and check if you can see the Migrate option in context menu. If it is there then it means your data source is for 3.x data flow and you need to migrate it first for using with 7.x dataflow. If you don't see the option MIGRATE there and if you dont wanna go for strandard installation of update rules or transformation thn just right click on the desired cube and choose create transformation from the context menu. It will create the transformation (which name would be starting from TRCS) and after that when you will create the DTP, you will face no error. Second way is to install the update rules or transformations from BI content of the desired cube and then create the DTP. What I recommend is first you check if the data source is 3.x or 7.x and after that go to BI content and install the update rules/transformations according to its data flow version. In case of any query/confusion let me know.

Error while transporting standard cube

Hi
We are facing errors while transporting a standard cube and all relevant objects.
While collection it throws errors saying certain routines are not active, whilst unable to find those routines.
If we ignore and transport the same, transformations es are not being transported.
How to resolve this., please provide inputs.
regards
Lavanya

Hi Lavanya
The error log says these objects are in repair mode in this system. I searched the system for the trnsformations, but they are not present. How do we resolve these
This only means that the objects were changed directly in the target system (could be QA or prod) and are captured in some request. You need to find the relevant request on the target system and take the appropriate action. You could chose to delete the request or transport it from QA to Prod.
Find the requests on the target system and you will see the tranaformations collected. However, it is not going to be an easy taskl for you to find as the TR will be with the technical name. But this is definitely the reason for the error.
Cheers
Umesh

Creation of DSO for a standard cube

Hi All,
I am new in BI modeling area & looking for help from you experts. What I have to do is , I need to create a DSO for a standard Cube 0PS_CS01.
In this I am doing is to take that data source which is in BI content for this Cube and from there I am extracting data fields and keyfields. Once this DSO is ready I will create update rules from this standard Data source to this newly created to DSO and after that I will create Update rules for Cube based on this DSO.
Can you guys help me to find the best way to collect keyfields & data fields based on the data source. Also suggest me if it is the right way to design data model fot the same as I desribed above.
All helpful replies will be appriciated with points.
Thanks a lot in Advance.
Sincerely,
John

1>double click on cube(0PS_CS01) --copy all characteristics(these will be key fields in DSO).
DSO only take 16 key fields so rest will go under data fields.most unique 16 fields will go under key fields.
2.all the keyfigues will go under data fields of DSO.
change settings and activate DSO.create transformations between (DSO and DS) and ( DSO and CUBE);
Hope this helps.
if you need further info just check these two 0FIAP_C03(cube) and 0FIAP_O03(DSO).compare the characteristics and key figure with the key fields and data fields respectively.you will get good idea.
in the above cube the data flow is like DS-DSO-CUBE

Migrate cognos cubes to essbase

Hi,
Does anyone know the steps to migrate Cognos cubes to Essbase 11? I've no idea where to start from other than doing it manually from scratch, like building the outline & loading data.
Can we export metadata & data from Cognos in a format which can be loaded to Essbase w/o much tedious manual task?
Any suggestions?
Thanks

Hi Srinivas,
Thank you for quick reply.
could you explain me process little bit clearly.
can you explain how to extract the data from cognos cubes to the relational layer?are there any third party tools for doing the same?
How do you compute complex calculation in cognos.can we do scripting in cognos as we do it is essbase using calculation scripts.
for eg :do you incorparate if else st in cognos(thinking in terms of reusability).
How can a security be migrated from cognos to essbase.
Have you used any third party tools for migration.
What is "report matrix " I don't have idea about cognos.
and some more things you followed
Thanks!

There is a standard cube for 0SEM_BCS_10?

Hi guys. I`m willng to use 0SEM_BCS_10 to get data fo preparation to consolidation. But I didn't find a standard infocube to get these data that cames from 0SEM_BCS_10..it will be a "staging" cube where the BCS cube (0BCS_C10) will get data by data stream ...do anyone know if there is this standard cube or I will have to create a Z?
Regards,
Thiago

Hi,
There is no standard cube for this datasource. You have to create a Z-cube. And please use more searching in the forum. I answered such a question a couple of times before.

Oliver Wright Class A Reporting and SAP Standard Cube

Dear All,
has someone experiences with Class-A KPIs Reporting in SAP based on the concept of Oliver Wright?
In his handbook he wrote that this concept reflects the effort and effort and achievement of thousands of client companies who have used our checklist standard to differentiate their business. So its supposed that SAP Standard might also support that concept in general by providing eventually standard cube if this trendy in U.S.
Does SAP support that concept or do you know who is there an third party software available to read this KPI out of SAP/APO in a structured way
see link: http://www.oliverwight.com/checklist.htm
Thanks for your support, Markus

In my experience, you just have to learn to read the code. The SAP books may tell you something but they are not at the level that you'd really need them to be if you wanted to know where best to put your enhancement.
It is certainly worthwhile checking all the documentation in the classes/methods there can be some useful things there. However, generally I think you are just better off reading through the code and working out how it all hangs together. Most WDA code is reasonably well written - in that it is fairly modular and has a reasonable degree of encapsulation. This certainly helps.
This is where experience really starts to matter!
NW7.02 will give us some nice UML diagrams to help understand the application flow - that will help, but until then, it's just a matter of being good at understanding code.
Good luck.
Chris

No applicable data found.. Erro in standard cubes.

Hi,
I am getting an error during the utilization of standard cubes in BI 7.01.
After the data load is complete, when i tried to execute the standard cube "Warehouse Workload History - Deliveres" , or
any other standard cubes, NO DATA CAN BE FOUND.
When using Bex Query Designer on Web, the message is : NO DATA CAN BE DISPLAYED. This could be due the current selection of variable or filter values.
When using Analizer in excel, the message is : NO APPLICABLE DATA FOUND
But if we create the same query from beginning, not using the standard cube, with the same fields and indexes and records,
the values are displayed.
We also try to save as the same standard report with another name and doesn`t work.
My system is SAP EHP1 for SAP NETWEAVER 7.0 in SO Linux and Oracle Database.
SAP_ABA , SAP_BASIS, PI_BASIS, SAP_BW is 701 level 07.
BI_CONT is 705 level 01.
please any advices

Check whether the standard report is created on the Info-provider on which the data is loaded .You can see the same in the query properties next to the check query button in query designer as you are able to see data , by creating another query on the inforprovider .

Migrating Essbase cube across versions via file system

A large BSO cube has been taking much longer to complete a 'calc all' in Essbase 11.1.2.2 than on Essbase 9.3.1 despite all Essbase.cfg, app and db settings being same (https://forums.oracle.com/thread/2599658).
As a last resort, I've tried the following-
1. Calc the cube on the 9.3.1 server.
2. Use EAS Migration Wizard to migrate the cube from the 9.3.1 server to the 11.1.2.2 server.
3. File system transfer of all ess*.ind and ess*.pag from 9.3.1\app\db folder to 11.1.2.2\app\db folder (at this point a retrieval from the 11.1.2.2 server does not yet return any data).
4. File system transfer of the dbname.esm file from 9.3.1\app\db folder to 11.1.2.2\app\db folder (at this point a retrieval from the 11.1.2.2 server returns an "unable to load database dbname" error and an "Invalid transaction status for block -- Please use the IBH Locate/Fix utilities to find/fix the problem" error).
5. File system transfer of the dbname.tct file from 9.3.1\app\db folder to 11.1.2.2\app\db folder (and voila! Essbase returns data from the 11.1.2.2 server and numbers match with the 9.3.1 sever).
This almost seems too good to be true. Can anyone think of any dangers of migrating apps this way? Has nothing changed in file formats between Essbase 9.x and 11.x? Won't not transferring the dbname.ind and dbname.db files cause any issues down the road? Thankfully we are soon moving to ASO for this large BSO cube, so this isn't a long term worry.

Freshly install the Essbase 11.1.2.2 on Window server 2008 r-2 with the recommended hardware specification. After Installation configure 11.1.2.2 with the DB/Schema
Take the all data back up of the essbase applications using script export or directly exporting from the cube.
Use the EAS Migration wizard to migrate the essbase applications
After the Migrating the applications successfully,reLoad all the data into cube.
For the 4th Point
IBH error generally caused when there is a mismatch in the index file and the PAG file while e executing the calculation script .Possible solutions are available
The recommended procedure is:
a)Disable all logins.
alter application sample disable connects;
b)Forcibly log off all users.
alter system logout session on database sample.basic;
c)Run the MaxL statement to get invalid block header information.
alter database sample.basic validate data to local logfile 'invalid_blocks';
d)Repair invalid block headers
alter database sample.basic repair invalid_block_headers;
Thanks,
Sreekumar Hariharan

How to find datasource and standard cube for given R/3 table

Hi All,
Can anyone help me that how to find a datsource, standard cube and Standard BI reports for given R/3 table.
For example if am having the table names "EKKO (Header)
EKPO (Line item)
EKET (Schedule Lines)
EKBE (PO History)
EKKN (Account Assignment/WBS)
EKAN/EKPA (Partner Info)" for all these tables how can i find the standard datasource and standard Cube.
Please help in this. I will assign the points.
Regards,
Shanthi

https://wiki.sdn.sap.com/wiki/display/BI/BWSDMMFIDATASOURCES
MM
Data Sources Tables
Purchasing
2LIS_02_SCL EKKO, EKBE, T001, T001W, EKET, EKPA.
2LIS_02_HDR EKKO, EKBE, T001, EKPA.
2LIS_02_ITM EKKO, EKBE, T001, T001W, EKPO, TMCLVBW, T027C, ESSR, T147K, T147
2LIS_02_SCN EKET, EKES, EKPO.
2LIS_02_CGR EKBE, EKES, EKPO.
2LIS_02_SGR EKET, EKBE, KKPO
Inventory
2LIS_03_BX stock tables, MCHA, MARA, T001, T001W, CALCULATED FROM MBEW, EBEW, QBEW.
2LIS_03_BF MSEG, MBEW, MKPF.
2LIS_03_UM BKPF, MBEW, QBEW, EBEW, BSEG.
MM
Purchasing   Datasources
ODS
0PUR_O01 2LIS_02_ITM, 2LIS_02_SGR, 2LIS_02_CGR, 2LIS_02_SCN.
0PUR_O02 2LIS_02_HDR, 0PUR_O01
0PUR_DS03 2LIS_02_SCL and 2LIS_02_SGR.
CUBE
0PUR_C10 2LIS_02_SCL and 2LIS_02_SGR.
0PUR_C07
0PUR_C08
0PUR_C09 0PUR_O02, 80PUR_O01, 2LIS_02_HDR
0SRV_C01 2LIS_02_S174
0PUR_C04 2LIS_02_S011, 2LIS_02_SCL, 2LIS_02_ITM, 2LIS_02_HDR
0PUR_C01 2LIS_02_S012, 2LIS_02_ITM, 2LIS_02_SCL
0PUR_C02 2LIS_02_S013
0PUR_C05 0MM_PUR_VE_01
0PUR_C06 0MM_PUR_VE_02
0PUR_C03 2LIS_02_S015
Inventory Management
CUBE
0IC_C03 2LIS_03_BX, 2LIS_03_BF, 2LIS_03_UM
0IC_C02 2LIS_03_S195, 2LIS_03_S197
0IC_C01 2LIS_03_S196, 2LIS_03_S198
SD
Data sources Tables
2LIS_11_VAKON VBUK, VBUP, VBAK, VBAP, VBKD, KOMV, T001.
2LIS_11_VAHDR VBAK, VBUK, T001
2LIS_11_VAITM VBAP, VBUP, VBAK, VBKD, VBAJP, T001, VBUK, PRPS.
2LIS_11_VASCL VBAP, VBUP, VBAK, VBEP, VBKD, T001, PRPS
2LIS_11_VASTH VBUK
2LIS_11_VASTI VBUP, VBUK
2LIS_11_V_ITM VBAP, VBAK, VBKD, VBUP, T001, PRPS, VBUK.
2LIS_11_V_SCL VBUP, VBEP, VBKD, VBAP, VBAK, T001, PRPS.
2LIS_11_V_SSL VBAP, VBEP, LIPS, WVBEP, VBUP
2LIS_13_VDKON VBUK, VBRP, KOMV, T001, VBRK.
FI
DATASOURCES Tables
Cost Center Accounting
0CO_OM_CCA_1 COSP, COSS
0CO_OM_CCA_2 COSP, COSS
0CO_OM_CCA_3 COSL, COKL.
0CO_OM_CCA_4 COSR
0CO_OM_CCA_5 COSB
0CO_OM_CCA_6 COOMCO
0CO_OM_CCA_7 BPJA, BPPE.
0CO_OM_CCA_8 COST, TKA07,COOMCO, CSLA, COST, COKL.
0CO_OM_CCA_9 COVP (COEP& COBK), COSP, COST, COEJ, COEP, T001.
0CO_OM_CCA_10 COOI, COSP_VTYPE.
Product Cost Controlling
0CO_PC_PCP_01 KEKO, TCKH3, TCKH8.
0CO_PC_PCP_02 KEKO, TCKH3.
0CO_PC_PCP_03 CKIS, T001K, TKA02, KEKO, MARA, MBEW.
0CO_PC_PCP_04 CKIS, T001K, TKA02, KEKO, MBEW, MARA
0CO_PC_01 AUFK, AFPO, COSS, COSP, COSB, COSL, COKEY, TKA09, TKV09
0CO_PC_02 AUFK, AFPO, COSS, COSP, COSB, COSL, COKEY, TKA09, TKV09
Hope this Helps.

BW 3.5 standard cube for FI

Hi all,
I am in implementation project hear our team implement all the modules mm,sd,pp and fi we complete implementation of mm,sd,and pp reports in FI client wants to activate standard cubes in bw
because they are failed in r3 fi implementation can any body tell me standard cube for FI module in bw
so that we complete our work as soon as possible .
Thanks

http://help.sap.com/saphelp_nw2004s/helpdata/en/fb/6ec7393168b42be10000000a114084/content.htm
Click on the Arrow - Go to each sub area - Expand Infocubes

Bw standard Cubes

Hi gurus ,
What are the standard cubes that we often use in an implementation project
please give me atleast 4 cubes in each module
regards

Hi,
For SD part:
http://help.sap.com/saphelp_nw2004s/helpdata/en/0a/d7c138944cfa06e10000000a11405a/frameset.htm
For Inventory Management part:
http://help.sap.com/saphelp_nw2004s/helpdata/en/5b/8dc73cee4fb55be10000000a114084/frameset.htm
For Purchasing part:
http://help.sap.com/saphelp_nw2004s/helpdata/en/2a/82073c8e56f658e10000000a114084/frameset.htm
For PP part:
http://help.sap.com/saphelp_nw2004s/helpdata/en/f0/7e0b3c727d0d06e10000000a114084/frameset.htm
For FI part:
http://help.sap.com/saphelp_nw2004s/helpdata/en/f0/7e0b3c727d0d06e10000000a114084/frameset.htm
For HR Part:
http://help.sap.com/saphelp_nw2004s/helpdata/en/26/77eb3cad744026e10000000a11405a/frameset.htm
With rgds,
Anil Kumar Sharma .P

Migrating standard cube to hana optimize cube trigger Error

Similar Messages

Maybe you are looking for