Migrating Stored Procedure from Informix

I am seeking tool to migrate stored procedure from Infromix 11.5(installed at one customer) into Oracle.
I find that Oracle Migration Workbench can only support migration from Informix version lower than 9.4.
Any ideal about migration stored procedures from Infromix 11.5 into Oracle?
Any help is highly appreciated!
tom

Mike,
Wrong forum, for this question, suggest you ask it in the PL/SQL forum.
Jim Stern

Similar Messages

Migrating Stored procedure from Oracle to Mysql

Dear All,
Please suggest, is ther any tool of stored procedure migration from oracle to mysql.
I tried some tool like
1. Intelligent Converter.
2. Sql way
3. Mysql Migration Toolkit.
But procedure cannot migrate properly.
hb venki

Venki,
I think you are in the wrong place, try finding a MySQL forum ;0)

Migrating DESKI Reports (Stored Procedures) from 6x to XI 3.1

I am migrating DESKI reports based off of Stored procedures from a 6x environment to XI 3.1
I have created a new OLE DB connection pointing to the new SQL server.
I need to find out how to point my report to the new connection.
I have seen in that in case of DESKI reports using universes, I can go to Data Manager --> Definition tab and point to my new universe there.
But in case of stored procedure report, that option is not available.
Can someone let me know how to go about migrating these reports which are pointing to Stored Procedures.
Thanks

Note that I have never done it.
But I heard you could create a new universe with a derived table. In the SQL of the derived table you can call the stored procedure. The connection of that new universe is your stored procedure connection.
Build you report with that new universe, using the derived table.

Calling Stored Procedures from JAVA Application

Hi all,
i am using JDeveloper 3.2.2 for creating a DB Application that
uses Oracle8i as DB Server.
One approach of the application is to only use PL/SQL Stored
Procedures to write Data back to the DB.
Some of the stored procedures expect more than 20 parameters.
I want to know if there is a better way to call such a stored
procedure from Java than using a CallableStatement and setting
its 20 parameters.
Another reason why the way above isnt possible for me is that
i need a dynamic way to set the parameters of the stored
procedure.
A solution for that dynamic way i could think of is to get
the information of the stored procedure by using some functions
of DatabaseMetaData and than use this information to map the
parameters with their respective variables in the java
application.
The best argument against this way is that it would be time and
performance consuming.
So could anybody tell me a solution to call PL/SQL stored
procedures from java which is better than doing something like:
String calString = "{Call myStoredProc(";
while(counter < 22) {
params += "?";
if(counter<21) params += ",";
counter++;
calString += params + ")}";
try {
CallableStatement cs = session.prepareCall(calString);
} catch(SQLException ex) { ... }
cs.setString(1, var1);
cs.setString(1, var2);
And that for every Stored Procedure i want to call ?!?
Any help or direction-leading would be really appreciated.
Tank you much.
MfG,
Oliver Bankel

Hi Oliver,
If you your Stored Procedures were in Java and seamlessly
integrated with your Java application would that make your life
easier?
I don't know if this is a practical or acceptable solution in
your environment but it would certainly solve all of your issues
and provide your with a couple of nice advantages. Scalability
and platform independence are just a couple I could think of.
There is a tool called in2j (see http://www.in2j.com) which will
automatically migrate your PL/SQL Stored Procedures into Java.
You can download a copy of the tool and migrate your PL/SQL to
Java with no upfront costs. If you're happy with the generated
Java and want to deploy it, the migration fee falls due - simple.
Hope this helps.
Elton

How to Migrate Stored procedure on Sql server 2008 to Oracle Database

Guys, I need help vey badly as I am new in this field.
Problem is that, I have to migrate stored procedure on Sql server 2008 to oracle Oracle database:
Whole scenario--
1. Sql Server 2008 application on Windows server (source machine)
2. I have to migrate 70 Stored Procedure
3. To Oracle Database on Linux machine (Target machine)
Any method (no problem)
Please, help me or give me any reference as I don't know which keyword is differ in both database.
Thanks in advance

Hi,
You could the free Oracle SQL*Developer to do this.
There is information and a download link here -
Oracle SQL Developer</title><meta name="Title" content="Oracle SQL Developer"><meta n…
and information on using it for migrations here -
http://www.oracle.com/technetwork/database/migration/index-084442.html
You could use it in 2 ways -
1. Go through a migration but just pull the stored procedure code from the file created after you generate the SQL from the SQL*Server database
2. Use the scratch editor accessed from -
- Tools - Migration - Scratch Editor
and paste the SQL*Server stored procedure code into the window and it will convert it to Oracle code. The tool is very good but may have problems if you have very complicated procedures that use SQL*Server specific utilities.
Regards,
Mike

Error while executing a stored procedure from forms6i

When I execute a STORED PROCEDURE from ORACLE DB 10g this procedure works perfectly fine.
But when I execute the same from the FORMs 6i I get the following error:
PDE-PLU022 Don't have access to the stored program unit
XMLPARSERCOVER in schema CARE.
where XMLPARSERCOVER is the class and
CARE is the schema.
Regards,
Jignesh S

I have tried this with both the owner of the schema and the intended user, -from both forms and directly.
All rights was granted on the stored procedure. Since posting I have found that one of the tables that the procedure might insert into, was not explicitly granted to the intended user, and after rectifying that the error message went away.
-however, the procedure now silently "finishes" without any evidence that it ever ran, if invoked from the forms application. When invoked from SQL Plus (or JDev, or Toad) it runs as expected.
I have no public synonym for the procedure, -is that necessary?
The stored procedure in question is implemented in java, and published as a stored procedure. It does rather heavy lifting, when running, using a view against another server , updating local tables and quite a lot of data validation/cleansing, and logging. All recourses are within the same schema.
Any ideas?

Call a pl/sql stored procedure from a report link

Hello everyone:
I have a report with a link in a column, which takes you to another page and passes values to that page, but also need the link, run a stored procedure before going to the other page.
In the Forum I found cases similar to this, but none of the examples is clear to me how I do this. It seems that the target of the link should be URL, and also I have to call the stored procedure with a javascript function.
My questions are:
- Is this the best method to make what I need?
- How should be the syntax of the link that takes me to another page and run the "stored procedure"
- How and where I put the function "javascript" to run the "stored procedure"
BDD: Oracle 11 g
Apex version 4.1
Best regards
Gerard

Hi,
Change the link to call an apex.submit process. (javascript).
Edit:
I've set up a basic example.
Region 1 (just so you can see the value getting set):
select :P27_HIDDEN item_Value
from dual
Region 2:
select rownum id, dbms_random.string('U', 12) sss
from dual
connect by level <= 20
item attributes for ID:
Target: URL
URL: javascript:apex.submit({request:'NAVIGATE', set:{'P27_HIDDEN':#ID#}});
(P27_HIDDEN is just a hidden item i created)
http://apex.oracle.com/pls/apex/f?p=54920:27
Edit2:
In your case, then you can just have a page process based on conditions request = expression1, expression1: NAVIGATE..... then a page branch to go to the desired page, also with the same conditions
Edit3:
Im not sure what examples you are referring to , as you didn't supply any links; but you mention calling the stored procedure from javascript, so would likely involve some AJAX, but imo not necessary.

Running a SQL Stored Procedure from Power Query with Dynamic Parameters

Hi,
I want to execute a stored procedure from Power Query with dynamic parameters.
In normal process, query will look like below in Power Query. Here the value 'Dileep' is passed as a parameter value to SP.
    Source = Sql.Database("ABC-PC", "SAMPLEDB", [Query="EXEC DBO.spGetData 'Dileep'"]
Now I want to pass the value dynamically taking from excel sheet. I can get the required excel cell value in a variable but unable to pass it to query.
    Name_Parameter = Excel.CurrentWorkbook(){[Name="Table3"]}[Content],
    Name_Value = Name_Parameter{0}[Value],
I have tried like below but it is not working.
Source = Sql.Database("ABC-PC", "SAMPLEDB", [Query="EXEC DBO.spGetData Name_Value"]
Can anyone please help me with this issue.
Thanks
Dileep

Hi,
I got it. Below is the correct syntax.
Source = Sql.Database("ABC-PC", "SAMPLEDB", [Query="EXEC DBO.spGetData '" & Name_Value & "'"]
Thanks
Dileep

How to send a Varying Array param to a PL/SQL Stored Procedure from Java

* I am VERY new to jdbc, and even somewhat new to Java
* I'm using Java 1.5, Oracle 10g.
* I need to call the following PL/SQL Stored Procedure from Java:
procedure setEventStatus
i_deQueueStatus in deQueueStatus_type
*deQueueStatus_type is the following (an array of deQueueStatus_OBJ):
CREATE OR REPLACE TYPE deQueueStatus_OBJ as object
eventID number (20),
dequeuestatus varchar2(20)
CREATE OR REPLACE TYPE deQueueStatus_TYPE IS VARYING ARRAY(500) of deQueueStatus_obj
*I have created a Java object as follows:
public class EventQueueDeQueueStatus
     long      eventID;
     String      dequeueStatus;
     EventQueueDeQueueStatus(long eventID, String dequeueStatus)
          this.eventID = eventID;
          this.dequeueStatus = dequeueStatus;
I have an ArrayList of these.
I need to pass this list to the Stored Procedure. How do I create a java.sql.Array so I can call CallableStatement.setArray to set the parameter? Or do I use something else? I have tried setObject with both the ArrayList and also with a primitive array, but got "Invalid Column Type" both times.
Any help would be greatly appreciated. I just got this task today, and I have to make it work by Tuesday :-( !
Thanks,
Kathy

Kathy,
Search the archives of this forum and the JDBC forum for the terms STRUCT and ARRAY and you can find some sample code on the JDBC How-To Documents page and the JDBC Samples which can both be accessed from this page:
http://www.oracle.com/technology/tech/java/sqlj_jdbc/index.html
Good Luck,
Avi.

How to call a stored procedure from WorkShop

Hello Everyone .. I'm quite new with WebLogic 8.1 & WorkShop, so please bare with
me .. Today I'm simply trying to find out how to call a stored procedure from
within workshop, using any of the DB Controls .. I see workshop provides a way
create a Java Control, Rowset Control, but it wont easily allow for a stored procedured
to be entered in place of the inline query .. Perhaps I've over looked it. Any
advise on the best way to tackle this task will be appreciated.
Atahualpa

Atahualpa--
Maybe this will help:
http://edocs.bea.com/workshop/docs81/doc/en/workshop/guide/controls/database/conStoredProcedures.html
Eddie
Atahualpa wrote:
Hello Everyone .. I'm quite new with WebLogic 8.1 & WorkShop, so please bare with
me .. Today I'm simply trying to find out how to call a stored procedure from
within workshop, using any of the DB Controls .. I see workshop provides a way
create a Java Control, Rowset Control, but it wont easily allow for a stored procedured
to be entered in place of the inline query .. Perhaps I've over looked it. Any
advise on the best way to tackle this task will be appreciated.
Atahualpa

Error ORA-04031 while executing a stored procedure from Pro C++ code

I am getting the error ORA-04031(Unable to allocate 4096 bytes of shared memory("Shared Pool",.....)) while trying to execute a stored procedure from my pro*C application. This happens only after a few hours since the application has been running. I am closing the cursor after every database call.
Does anyone know why it is happening and any possible solutions?
TIA
Srithaj.

One thing that can be done is to flush the shared pool before starting the application.
alter system flush shared pool;
Another is to increase the shared pool size by setting the parameter shared_pool_size in init_sid.ora file.
null

Error while calling stored procedure from Java

Hi Guys,
How are you everybody? I hope everything is goin fine on your side. I have one issue in PL/SQL while calling below stored procedures from Java.
Problem Description: We have a stored procedure PROCEDURE BULK_INSERTS (
V_SESSION_ID_TAB IN T_SESSION_ID_TAB_TYPE,
V_SERVICE_TYPE_TAB IN T_SERVICE_TYPE_TAB_TYPE,
V_SERVICE_LOCATION_TAB IN T_SERVICE_LOCATION_TAB_TYPE,
V_SERVICE_CALL_NAME_TAB IN T_SERVICE_CALL_NAME_TAB_TYPE,
V_SERVICE_CALL_START_TIME_TAB IN T_SERVICE_CALL_ST_TAB_TYPE,
V_SERVICE_CALL_END_TIME_TAB IN T_SERVICE_CALL_ET_TAB_TYPE,
V_SERVICE_CALL_DURATION_TAB IN T_SERVICE_CALL_DUR_TAB_TYPE,
V_STATUS_TAB IN T_STATUS_TAB_TYPE,
V_NOTES_TAB IN T_NOTES_TAB_TYPE
) and we are getting ora errors while calling this stored procedure from java.
All tab types are declared locally, at package level.
Here is error which occur while calling this sp:
{call BULK_PKG.BULK_INSERTS(?,?,?,?,?,?,?,?,?)}
And the parameter types we are using are:
SESSION_ID - NUM_TAB_TYPE
SERVICE_TYPE - VAR_TAB_TYPE
SERVICE_LOCATION - VAR_TAB_TYPE
SERVICE_CALL_NAME - VAR_TAB_TYPE
SERVICE_CALL_START_TIME - DATE_TIME_TAB_TYPE
SERVICE_CALL_END_TIME - DATE_TIME_TAB_TYPE
SERVICE_CALL_DURATION - NUM_TAB_TYPE
STATUS - VAR_TAB_TYPE
NOTES - VAR_TAB_TYPE
And the Exception stack trace is:
ERROR (com.att.retail.r2d2.persistence.dao.ExternalServiceCallDAO.saveExternalServiceCallInfo(ExternalServi
ceCallDAO.java:143)@ExecuteThread: '252' for queue: 'weblogic.kernel.Default') {Error attempting to save collected ESC data}
java.sql.SQLException: ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1030)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:191)
at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:944)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1222)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3381)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3482)
at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:3856)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1373)
at weblogic.jdbc.wrapper.PreparedStatement.execute(PreparedStatement.java:98)
at com.att.retail.r2d2.persistence.dao.ExternalServiceCallDAO.doBulkInsert(ExternalServiceCallDAO.java:220)
at com.att.retail.r2d2.persistence.dao.ExternalServiceCallDAO.saveExternalServiceCallInfo(ExternalServiceCallDAO.java:138)
Please help my guys out of this. I will really appreciate all suggestions and advices.
Thank you everybody.

I am trying to pass parameter to test my procedure but it is giving this error : ORA-06531: Reference to uninitialized collection
ORA-06512: at line 12
Here is example for my test procedure:
declare
v_session_id_tab SESSION_ID_TAB_TYPE;
v_service_type_tab SERVICE_TYPE_TAB_TYPE ;
v_service_location_tab SERVICE_LOCATION_TAB_TYPE ;
v_service_call_name_tab SERVICE_CALL_NAME_TAB_TYPE;
v_service_call_start_time_tab SERVICE_CALL_ST_TAB_TYPE;
v_service_call_end_time_tab SERVICE_CALL_ET_TAB_TYPE;
v_service_call_duration_tab SERVICE_CALL_DUR_TAB_TYPE;
v_status_tab STATUS_TAB_TYPE;
v_notes_tab NOTES_TAB_TYPE;
begin
v_session_id_tab(1) := 1;
v_service_type_tab(1) := 'db';
v_service_location_tab(1) := 'local';
v_service_call_name_tab(1) := 'Name of call';
v_service_call_start_time_tab(1) := SYSDATE;
v_service_call_end_time_tab(1) := SYSDATE;
v_service_call_duration_tab(1) := 100;
v_status_tab(1) := 'Z';
v_notes_tab(1) := 'NOTES';
BULK_INSERTS (v_session_id_tab,v_service_type_tab, v_service_location_tab,v_service_call_name_tab,v_service_call_start_time_tab,v_service_call_end_time_tab,
v_service_call_duration_tab, v_status_tab, v_notes_tab);
end;
I declare all types at schema level.
Please give your comments.
Thank you

Error while invoking stored procedure from BPEL process

Hi Folks,
I am facing the below mentioned issue while invoking a stored procedure in BPEL process :
I am trying to invoke a stored procedure from a BPEL process. The process runs fine for the first/second time, but gives the below error after that whenever i try to run the process :
file:/oracle/orasoa/bpel/domains/default/tmp/.bpel_ProvisionOrderASAPReqABCSImpl_1.0_50dd1595129e9bbb00560e31e7c18cef.tmp/DB_CALL_GetPendingSubscriptionProc.wsdl [ DB_CALL_GetPendingSubscriptionProc_ptt::DB_CALL_GetPendingSubscriptionProc(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'DB_CALL_GetPendingSubscriptionProc' failed due to: Error while trying to prepare and execute an API.
An error occurred while preparing and executing the PROC_GET_PENDING_SUBSCR API. Cause: java.sql.SQLException: Io exception: Connection reset [Caused by: Io exception: Connection reset]
; nested exception is:
ORABPEL-11811
Error while trying to prepare and execute an API.
An error occurred while preparing and executing the PROC_GET_PENDING_SUBSCR API. Cause: java.sql.SQLException: Io exception: Connection reset [Caused by: Io exception: Connection reset]
Check to ensure that the API is defined in the database and that the parameters match the signature of the API. Contact oracle support if error is not fixable.
I am not getting how the BPEL is referring to the DB wsdl from the tmp folder. To resolve this issue, we have to stop the SOA server, delete the tmp files, and restart the server.
Any pointers in this regard will be really helpful.

First of all does this scenario occur again.
"Works first/second time. Later gives this error."
After you restart the SOA server are you able to reproduce this scenario?
As already pointed out and from the error message, database connection is reset.
If you find this error again, try this out.
em -> home / oc4j_soa -> Administration -> JDBC Resources
Use the "Test Connection" option for the Connection Pool that you are using for your database JNDI.
It comes back and say "Connection to "XYZCP" established successfully." it is good to use.
Run the BPEL process again and once you find the error, come back and test the connection.
If it comes back with Error, diagnose based on the error message received.
Cheers
Kalidass Mookkaiah
http://oraclebpelindepth.blogspot.com/

Facing error while trying to execute stored procedure from JSF Application

Hi, I am facing the below error when I try to execute a stored Procedure from JSF application which is deployed on WAS 7.0
=2013-03-04 19:06:58,550 INFO [com.lloydstsb.iw.util.DBUtils] - DBUtils : executeFileNetStoredProc method started..
=2013-03-04 19:11:58,271 ERROR [com.lloydstsb.iw.dao.FileNetCustomDBSynchDAOImpl] - Data Access Exception
com.lloydstsb.iw.common.exceptions.DataAccessException: Data Access Exception Occured : Integration Stored Proc- java.sql.SQLException: java.lang.ClassCastException: oracle.jdbc.driver.LogicalConnection incompatible with oracle.jdbc.OracleConnection
     at com.lloydstsb.iw.util.DBUtils.executeFileNetStoredProc(DBUtils.java:959)
     at com.lloydstsb.iw.util.DAOUtil.executeFileNetStoredProc(DAOUtil.java:117)
     at com.lloydstsb.iw.dao.FileNetCustomDBSynchDAOImpl.updateFileNetDetailsCustomDB(FileNetCustomDBSynchDAOImpl.java:36)
     at com.lloydstsb.iw.servlet.IndexServlet.service(IndexServlet.java:127)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:831)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1443)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:790)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:443)
     at com.ibm.ws.webcontainer.servlet.ServletWrapperImpl.handleRequest(ServletWrapperImpl.java:175)
     at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:91)
     at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:859)
     at com.ibm.ws.webcontainer.WSWebContainer.handleRequest(WSWebContainer.java:1557)
     at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:173)
     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:455)
     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:384)
     at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:83)
     at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
     at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
     at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
     at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:138)
     at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:202)
     at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:766)
     at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:896)
     at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1527)
The oracle version we are using is 11g.
Previously it worked fine when the application was used in 10g.
Can someone please help me in resolving this issue?
Kiran
Edited by: 991640 on Mar 4, 2013 8:25 PM

java.lang.ClassCastException: oracle.jdbc.driver.LogicalConnection incompatible with oracle.jdbc.OracleConnection
Are the the JDBC JARs packaged with the application? If so, remove the applicaiton packaged JDBC JARs as the JARs are also in WebSphere application server.

Error while fetching Stored procedure from JDev DB Adapter

Hello
I am facing a problem while configuring stored procedures from Jdeveloper using DB Adapter. I am using Sql Server 2005 as my database,Jdeveloper version is 10.1.3.1.Bpel Version is 10.1.3.3. Connection to the Sqlserver 2005 database is fine, but it shows only views and tables. I get the following error message when I try to add the sql stored procedure call
"An error occured while obtaining the database schemas.Verify that the database connection is valid , and is supported"
Can someone help me please.
Thanks,
Phani
Edited by: Phani on Oct 28, 2008 11:30 AM

I think you have two problems here. First, JDeveloper 10.1.3.1 doesn't support SQL Server stored procedures. There is a command-line utility that you can use to generate the required BPEL artifacts (WSDL and XSD). Second, you're using a 10.1.3.1 design-time with a 10.1.3.3 runtime. These are not compatible so you will likely run into namespace issues when you try to run your BPEL processes. You should upgrade your JDeveloper to 10.1.3.3. JDeveloper will support third-party databases in 11.1.1 including SQL Server 2005 (but not 2000), IBM DB2 v8.x and v9.x, DB2 AS/400, and MySQL. JDeveloper will support MySQL v5.2.6 and above because the INFORMATION_SCHEMA.PARAMETERS table was added at that time. The PARAMETERS table does not exist in MySQL versions prior to v5.2.6 so you will have to use the command-line utility.

Migrating Stored Procedure from Informix

Similar Messages

Maybe you are looking for