Migrating SUP 1.5 to 2.0 - findByPrimaryKey is not available

Hi All,
we are in the process of migrating SUP 1.5 to 2.0 version and when we migrate the modules findByPrimaryKey methos is not availalble in the generated code of SUP 2.0 whereas it is availalbe in 1.5 version and would want your help in find out the right method to pass the where clause variable to get the data from ERP system thro SUP 2.0.
please help us on this regards.
thanks
Siva Kumar

Changing the project to Flex 4 (don't know if I checked the flex 3 compatibility mode) and using air 2.0.3 did the trick for the printing problem.
Since I used the evaluation version of Flash builder 4, transfering the complete project to flex4 is not an option right now.
Sending you a copy of my complete project is not possible cause it works with private mysql data on a LAN network.
If you still want a test app, I can try to extract some parts of my project.
Greetz

Similar Messages

  • Hello  I bought my wife a new MacBook Pro, in setting it up for her, I took her Time Machine external drive to migrate onto the new machine but her old MBP not only was on 10.6, it was my old machine which I was still Administrator for.  i plugged in the

    Hello
    I bought my wife a new MacBook Pro, in setting it up for her, I took her Time Machine external drive to migrate onto the new machine but her old MBP not only was on 10.6, it was my old machine which I was still Administrator for.
    i plugged in the external drive to start the migration process after entering her name and username from the old machine which gave me the options on transferring the old data over.
    I also unchecked the Administrative end that had my info hoping that ONLY her data, files, etc., would be the ones sent over to her new machine which I wanted her to be the ONLY Administrator for. All went like clockwork until the restart.
    Normally the screen should show the username and only need the password but both entries were blank, as in ‘Other’ sign in option available only. I entered her name and password, nothing….used her username and password, nothing. Used my old Administrator name and password, NOTHING!
    I tried defaulting to factory settings from the Restore feature but it directs me to notify Apple. I tried in Terminal to change the password, nothing. I tried to boot from MY external drive and it doesn’t recognize it. I tried to even use my external drive which actually has the Mavericks upgrade, nothing!
    Basically I can only get the startup screen which isn’t accepting the username/password or the Restore feature which doesn’t offer any options helpful!
    Please, how do I start from scratch and start over here? Or simply change the Administrator name and password so I can proceed with everything thats already on there? I wish I could even boot from another drive but no luck on anything!

    First, on the old machine, make your wife's account an admin one. Log into it and delete yours. Then, update the TM backup. Finally, use Internet recovery mode, ⌘⌥R, erase the HD, and restore the OS. One first boot, follow the steps outlined in Pondini's Setup New Mac guide.

  • HT1338 After migration from MacBook 13' running OSX 10.6.8 to MacBook Pro 15' Retina OSX 10.8.2 using Migration assistant, the Bluetooth assistant mentions "name not available" and it cannot detect my Magic trackpad. There is no mention of any mishap.

    I just migrated from MacBook 13' OSX 10.6.8 to MacBook Pro 15' Retina OSX 10.8.2 with the use of Migration Assistant. When attempting to install my Magic Trackpad, the Bluetooth Assistant mentions "name not available" so that the device cannot be detected.  In have disconnected the firewall.Thanks for assistance.

    Create a new, temporary admin account and see if you can set it up in that account.

  • I have a new Mac and I migrated mi old one to this. I can not open iTunes because a message stating "iTunes Library.itl" can not be opened because it was created in more recent version of iTunes. There is not a new version to download.

    I have a new Mac and I migrated mi old one to this. I can not open iTunes because a message stating "iTunes Library.itl" can not be opened because it was created in more recent version of iTunes. There is not a new version to download. How can I fix this?                             

    Go to iTunes > about iTunes.  What version are you running?  If necessary, hold down the option key while starting iTunes and create a new, test library so it will start.

  • Just got a mac air and started using it. after getting it set up i migrated files from my old pc.  i did not realize that the files migrated to a different user account.  how do i delete this user account and not lose the migrated files which i need

    I just got a mac air and set it up and started using. after getting famiiar with it i migrated my files from my old pc. i did not realise that the files migrated to a new user account.  how do i delete this user account but not lose the migrated files?

    Mac 101: File Sharing
    Mac OS X 10.7 Help: Transfer files between two Mac computers
    Mac OS X 10.7 Help: Set up a Windows computer to share files with Mac users
    Mac OS X 10.7 Help: Use iDisk to share files
    Mac OS X: Sharing your files with non-Apple computers
    How to share a Mac's files with a PC and vice versa.

  • After migration to Exchange 2013 the old outlook clients do not automatically reconfigure

    After migration to Exchange 2013 the old outlook clients do not automatically reconfigure
    we use outlook 2013

    Hi ,
    I hope you would be having exchange 2013 coexistence environment with exchange 2010 or 2007.
    Autodiscover is the feature which will make the outlook profiles to configure automatically.So please make sure the following things are in place.
    1.Autodiscover record on the internal dns need to be configured and it has to be resolved properly to the cas servers or else to the LB if you have.
    2.Please check the autodiscover internal url.
    get-clientaccessserver -identity "server name" | fl *internaluri*
    3.Make sure the name used for the autodisocver and internal outlook anywhere are available on the SAN certificate installed in exchange.Same time we need to enable the installed SAN certificate for the exchange services like iis,pop,imap,smtp.
    4.You need to have the autodicover name and internal outlook anywhere name on the internet explorer proxy exceptions when you have proxy servers available on your network for internet access.
    Note : moreover we need an additional information's from your side about your environment.
    Thanks & Regards S.Nithyanandham

  • Migration Assistant 10.6 only recognizing Firewire option, still not working

    I'm attempting to use Migration Asssitant to transfer a user from a MacBook to an iMac. Both systems are using 10.6.8 and are on the same wireless network.
    PROBLEM 1 – Migration assistant is only giving the option of transferring via FireWire; it won't give Ethernet or Wireless options. Yes, with an Ethenet cable connected between the computers, and yes, with the computers on the same wireless network.
    PROBLEM 2 – Even over Firewire it's not working. With the MacBook in target drive mode, the "Select the System to Migrate From" window shows two drives, both named "Button". Button is not the name of the (one) drive. Selecting one or the other brings you to the "Pick Users To Transfer To This Machine" page, which just hangs forever.
    Super frustrating. Help? I couldn't find anything else about this in the forums.
    --J.

    Try this. Erase the iMac, reinstall the OS, and on first boot, use the Setup Assistant. See Pondini's Setup New Mac guide, which should be comparable to what you're trying to do. BTW, no need for TDM.

  • Migration of Items for which IR done and GR not done

    Hi,
    We are migrating from legacy to SAP. On FI we are migration following items
    - Migration of Trial Balance as of a cut off date
    - Migration of AR,AP and GL Open Items
    We will have some IRs for which GRs are not done, what should be strategy for migrating the same. Kindly note that we are not migrating POs from legacy.
    Thanks
    Balla

    If you don't migrate the PO from legacy to SAP then you will not be able to do the 3-way match automatically on SAP. I suggest you convert IR over as open item in AP but populate the payment block to prevent them from being paid by the payment run. Whenever GR is done in legacy system or manually by paper tracking or otherwise the user should release the payment block on the AP invoice. If SAP is the inventory system I would assume the user also need to perform the GR as a 501 movement type (goods receipt without order). The account used when doing the 501 movement type should be the provision account used in legacy system (provision account for 'invoiced, not yet received').

  • Migration from old MBA to new MBA.  Ethernet not coming up as an option, defaults to wifi

    Hello
    I'm using migration assistant to migrate all the data from my old MBA [Snow Leopard] to new MBA [Lion].
    I've tried many times using different wireless connections and the process just hangs with 3 hrs, 50 mins left to run.
    Apple store bod advised me to connect using ethernet as she said that wireless is notoriously unreliable for migration, so I've bought two ethernet adaptors and a cable :o/
    Now, each time I aim to migrate, the assistant doesn't ask if I want to migrate using ethernet, it just seems to default to wifi.
    If I turn off wifi, to try and force an ehternet option to pop up, then the computers don't seems able to locate each other in the first place.
    I have tried with the cables connected before I switch on, also by switching on and then connecting the cables.  Neither seems to work...
    I'm still hanging at around 3 hrs 30 mins.  There's about 75Gb of data to transfer in all. I have set my energy saver mode to never sleep.
    Not sure what to do next, and can't find a reference to this particular situation on Apple Support.
    Anyone had this experience and could advise me, please?
    Many thanks,
    221b

    Setup your new phone, then update to iOS 8.1.3. Once done: Settings>General>Reset>Erase All Content & Settings". At the setup screen you'll now be able to select your old phone's backup.

  • HELP!  -  Fonts not available after migration to Leopard

    My company recently upgraded my Mac from a PowerPC G5 tower - which worked perfectly, to a MacBook Pro Intel Core Duo - so I would be able to work from home. I work in publishing and use pre-set templates and fonts within QuarkXPress. The most important fonts are the ones needed to build our publications, but ever since I've migrated all of my files, fonts, settings, etc. from the PPC to the Intel machine, those (and other) fonts don't work. They don't even show up in the list of available fonts.
    We use FontAgent Pro, and I've tried updating that. I've tried demos of other font managers as well as the built in Font Book software. I've installed and run Font Finagler and cleared out all font caches. I've even tried installing those fonts directly into the "/Library/Fonts" folder and the "/System/Library/Fonts" folder and nothing works well. The only one that PARTIALLY worked was Suitcase Fusion, but it didn't recognize all of the fonts - and the ones it did recognize, it changed their names: i.e. "Nimrod MT Bd" became "Nimrod MT-Bold" resulting in the missing fonts message in QuarkXPress.
    System: MacBook Pro, 2.2GHz, 2GB RAM, Leopard version 10.5.1, QuarkXPress, FontAgent Pro
    Typfaces not working: Nimrod MT, Nimrod MT Bd, Nimrod MT It, Myriad MM (numerous versions)
    Anyone have any ideas?
    Thanx in advance,
    Darryl

    Hi Darryl,
    From the sounds of it, you have the outline portion of some Type 1 PostScript fonts, but don't have the whole font. Type 1 PostScript fonts are a set. One file is a suitcase containing all of the low res bitmap screen fonts. The rest are the outline printer fonts. As an example, here's Adobe Garamond.
    Adobe Garamond
    AGarBol
    AGarBolIta
    AGarIta
    AGarReg
    AGarSem
    AGarSemIta
    The first file which I highlighted in green is the font suitcase of bitmap screen fonts. The rest are the outline printer fonts.
    1) The files for a Type 1 PostScript font must have both the screen and printer fonts for a given set in order to work. They also must be in the same folder.
    2) The suitcase of bitmap fonts will work alone, but output will be terrible since the system will print the fonts using the 72 dpi screen fonts in the suitcase if the outline portions are missing.
    3) Having only the outline fonts will not work. You will get exactly what you are having problems with. You can see the fonts, but Font Book won't load them. That's not a problem with Font Book itself. No font manager will load outline fonts without the matching suitcase of screen fonts present.
    It also may be how you copied them. If the fonts were active on the source Mac and you tried to copy them across a network or via FireWire, that usually doesn't work. Copy them first to a new folder on the desktop of the Mac the fonts reside on. Then copy the desktop copies to your MacBook Pro.

  • Error in CodeFirst Seed with migrations : Modifying a column with the 'Identity' pattern is not supported. Column: 'CreatedAt'. Table: 'CodeFirstDatabaseSchema.Category'.

    Hi,
    I have activated migrations on my Azure Mobile Services project. I filled the new seed function Inside the Configuration.cs class of the migrations. If the tables are empty, the seed function is going without any problems. When my AddorUpdate tries to update
    the first object I get the error in the inner exception : "Modifying a column with the 'Identity' pattern is not supported. Column: 'CreatedAt'. Table: 'CodeFirstDatabaseSchema.Category'."
    Part of my code is as follows:
    context.categories.AddOrUpdate(
    new Category { Id="1", Code="GEN", Text="General"},
    new Category { Id="2", Code="POL", Text="Politics"},
    new Category { Id="3", Code="FAS", Text="Fashion"},
    new Category { Id="4", Code="PEO", Text="People"},
    new Category { Id="5", Code="TEC", Text="Technology"},
    new Category { Id="6", Code="SPO", Text="Sport"},
    new Category { Id="7", Code="LIV", Text="Living"}
    Any help is welcomed. Thanks.
    Faical SAID Highwave Creations

    This occurred to me because I changed my POCO models to inherit from EntityData after I had already created my database without the extra Azure Mobile Service properties (UpdatedAt, CreatedAt, Deleted). The only way I fixed it was to drop the database and
    start over with my classes inheriting from EntityData from the beginning. If you can't do that then I would create a new table with EntityData models and see how that database is created and manually update your tables to match those. Here's an image of one
    of my tables from the management console on Azure. You can see that CreatedAt is an index.

  • User migration vom SAP DB to LDAP: Problem when userId not equal to logonId

    Hello
    I have to write a migration tool which migrates the users stored in the SAP DB to LDAP. Thereby the logon ID of the users in the SAP DB is not equal to the user ID.
    The migration works fine and in SAP Identity Management (IDM) everything is ok.
    But when I try to log onto the portal with a migrated user, the portal tells me that no portal role is assigned to the user. But the IDM shows clearly that the portal role is assigned to the user.
    Investigation showed that when I create in the LDAP a user with the same logon ID and user ID, the log onto the portal works ok. As soon the logon ID differs from the user ID, the portal does not find the assigned portal role anymore, although in IDM everything works.
    How can I solve this problem? It is important that the logon ID and the user ID are different as otherwise all the stored data has wrong references.
    Greetings
    Rolf
    Edited by: Rolf Grüninger on Jul 19, 2011 6:08 PM

    Problem solved:
    The naming attribute of the user account has to be set to the same attribute as the one of the user object and not to the user logon ID.

  • Migrating PS CS3 to Intel with OS 10.5.6 Plug-ins Not Available

    After migrating CS3 to MacBook Pro, 10.5.6, a list of unavailable plug-ins comes up. All except two were PS plug-ins, NOT aftermarket. Sure enough, they don't show up in the filters menu. I don't know where else they are missing. (migrated from Powerbook 10.4.11)
    What is to be done?
    CS3, OS 10.5.6/ MB Pro 2GB ram, 2.4 Ghz

    Migrating is never a great idea, but migrating an application originally installed under Tiger on a PowerPC machine to a Mac-Intel box running Leopard goes beyond being a monumentally bad, horrendous idea. It's sheer lunacy!
    You need to wipe out that drive, or at least use the Adobe Uninstaller (installed by CS3 in Applications/Utilities/Adobe/ on your old machine), look for, download and run the CS3Clean script, and then install the application from the original media.
    Also, realize that any plug-ins that were not written in Universal Binary will NOT run under CS3 on the Mac-Intel machine,
    unless you run CS3 under Rosetta software emulation with a corresponding
    massive performance hit.
    Never, ever try
    "migrating" again. :(

  • Data migrated from MS SQL Server 2k to Oracle8i is not the same :(

    I'm trying to help a customer here who is trying to migrate a
    table from MS SQL Server 2000 with column WORD of type varchar
    (100) to Oracle8i (8.1.7.2) using Oracle Migration Workbench
    1.4.0.1 using MS SQL Server 2000 plugin. That column has unique
    values and has a primary key enabled on it. When migrated, the
    table on Oracle will have duplicate and incorrect data as well
    as ORA-2437: cannot validate (JAVAFARM.PK_IDX_WORD) - primary
    key violated.
    The data on both tables look like this :
    ss2k value oracle value
    ========== ============
    € ┐
    … ┐
    ’ ┐
    – ┐
    ƒ ┐
    Y= ┐
    4 ┐
    –0 ┐
    — ┐
    & ┐
    ‘ ┐
    Any idea what could be wrong or how to fix such thing?
    Thanks :)
    Fawaz.

    otn.oracle.com -> technologies -> Migration Workbench ->
    Oracle Migration Workbench Release 1.4.1.0.0 for Windows (yes
    even for 14101 beta) -> Agree to export/license conditions ->
    enter email or ignore -> Scroll down page to beta versions ->
    download omwb14101.exe (or download it piece by piece) and
    sqlserver2000.exe
    Regards,
    Jim.

  • Cold migration of old LDoms with slice-based system disks - not possible?

    We have a couple of older T5120s that we would like to upgrade both the firmware and LDoms software on.
    Currently they both run LDoms 1.2; we'd like to go to 2.0 or hopefully 2.1.
    cas2:1:1006 [root] # ldm -V
    Logical Domain Manager (v 1.2_patch)
    Hypervisor control protocol v 1.4
    Using Hypervisor MD v 1.1
    System PROM:
    Hypervisor v. 1.7.4. @(#)Hypervisor 1.7.4.a 2009/09/21 08:25\015
    OpenBoot v. 4.30.4 @(#)OBP 4.30.4 2009/08/19 07:23
    We thought we would clear out our other "sandbox" T5120 (with LDoms 2.0) and migrate the client LDoms in the machines to be updated over to the sandbox, so if anything went wrong we could clear out the old 1.2 machine and then re-migrate the LDoms back over to it.
    Well, it turns out the client LDoms on the 1.2 system were made with paired slices as the system disks instead of files :-(
    vdisk0@casdev c1t0d0s3
    vdisk1@casdev c1t1d0s3
    vdisk0@casray c1t0d0s1
    vdisk1@casray c1t1d0s1
    In one of the client LDoms it has (as you would expect, given this setup)
    NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
    casdev active -n---- 5000 12 4G 0.1% 414d 18h
    DISK
    NAME VOLUME TOUT ID DEVICE SERVER MPGROUP
    vdisk0 c1t0d0s3@primary-vds0 0 disk@0 primary
    vdisk1 c1t1d0s3@primary-vds0 1 disk@1 primary
    The control LDom for these client LDoms has 2 disks and slice 0 of each disk (~ 20 GB) is used for the control LDom, and there are these other slices (slice 1, 3, ... also each ~ 20 GB) for the client LDoms.
    The target "sandbox" system we wanted to migrate to also has 2 disks, but slice 0 of each is a single, disk-spanning partition - since we're using files as virtual disks for the client LDoms that were previously on that system (since wiped out), there was no need for multiple slices.
    I'm guessing that with this setup there is no way to even do a cold migration of the old LDoms 1.2 client LDoms to the newer LDoms 2.0 sandbox system, short of a complete reinstall of the sandbox to create a similar slice-based setup. :-(
    (Unless it involved somehow re-slicing the control LDom's disks and making identically-sized partitions to match the old system's and then - somehow - "dd"'ing the source system's client LDom disk slices over into the target system's)
    Am I right?
    Edited by: Riot Nrrrd™ on Oct 28, 2011 3:30 PM

    I'm guessing that with this setup there is no way to even do a cold migration of the old LDoms 1.2 client LDoms to the newer LDoms 2.0 sandbox system, short of a complete reinstall of the sandbox to create a similar slice-based setup. :-(
    (Unless it involved somehow re-slicing the control LDom's disks and making identically-sized partitions to match the old system's and then - somehow - "dd"'ing the source system's client LDom disk slices over into the target system's)If you are not using SAN-disks, then it is a bit difficult to do the migration. If you are using ZFS on LDoms 2.0 sandbox, you could try to create ZFS volumes for guest domains and send data on those volumes from LDoms 1.2 system, after creating guest domains from exported XML configurationg files.
    Does this sound tryable solution?

Maybe you are looking for