Migrating the Solaris version

Hi,
We have Solaris 9 with the Sun cluster 3.2 and the Netbackup application is 5.1 MP4, now we are planned to upgrade the Solaris version form 9 to Solaris 10.
Could you please provide me an Idea How to upgrade this?

Maybe you should clarify what you mean by "upgrade wothout affecting cluster"?
In your cited thread I was assuming you mean "upgrading a SC _3.0_ configuration from Solaris 8 to Solaris 9 without changing the Sun Cluster software", since you said "touching" - which is not possible, since Sun Cluster uses different kernel drivers for S8 and S9, which means you need to perform a Sun Cluster package upgrade as well.
This thread here is about Sun Cluster _3.2_, which introduced the feature of dual partition upgrade.
Note that also in this case the Sun Cluster packages get exchanged, so you are again "touching" them. The only difference here - you can perform upgrade of one half while the other is still providing the service.
Greets
Thorsten

Similar Messages

Migrate the complete solution along with data from BW 2.x to BW 7.x

Dear Experts,
There is a scenario in which SAP BW 2.0 have been upgraded to 7.0 version, while the BW flow and the custom models that exists are still in 2.X version
We acquired separate SAP BW 7.4 powered by Hana , We would like to migrate the older version of BW i.e 7.0 with mentioned content and models into this new system with data and going forward our organization would like to have only one system and dismantle the old system . Please let us know the process in the form of steps as to how it can be achieved . Need your expert input on this .
Thx,

The below is my Proposed Solution
•Identify the list of Models & Objects which is required Migration eg: out of 100 Cubes only in Use 70 Cubes & Reports 150
•Migrate the models in System 1 (Old BW System)
•Create RFC from System 1 to System 2(New BW System)
•Transport Objects to System2
• Load the data from System 1 to system 2 using Open Hub/datamart
–If you have any Full load from ECC , Non SAP or Excel, no need to load the data from System 1 to System 2, you can load directly from source to system 2.
PLease Advise.........

Migration of older version of composite instances to newer version

hi,
i need to migrate the older version of composite instances to new version.
i have deployed a BPEL process to version 1.0 and i have some running instancs in that version
now i have redeployed the same process to another version 1.1. is it possible to migrate the 1.0 instances to 1.1 in oracle SOA 11g?
the problem is, when i redeploy the process to the same version, the process state is getting stale which should not happen
can you pleasae tell to prevent the state going stale on redploy (or)
migration of that instance to new instance version
thanks in advance. expecting a solution at the earliest

thanks,
if so,
i have an humantask activity in the process. in revision 1.0 , i have some instances which are running. it is exposed as a service which other services consume.
now, if i redploy to the same revision, the state goes stale, so that we could not act on stale human tasks which should not happen
what should i do in this case if i am unable to migrate to the revision?
pleasse help..

Y2k10 problem in older Solaris versions?

Hi,
Looks like the Solaris versions prior to the version 2.6 (SunOS 5.6)
have a problem of year 2010.
They just don't boot in a single user mode from the installation cd,
hanging after detection of serial ports (zs1 is /obio/zs@0,0), when
/devices directory should be configured.
At least the version 2.5.1 hangs in the emulator when the system date
is > 2009.12.20. Can anyone confirm or disprove this on a real
hardware?
Regards,
Artyom Tarasenko
solaris/sparc under qemu blog: http://tyom.blogspot.com/

Around the version 8 timeframe a feature was added to maintain the state of the form when it was saved. Before that time it was up to the Developer of the form to write code into the form to maintain the state of the form when it was opened. I believe that this is what you ar experiencing (but it is hard to tell without seeing the form in action).
Paul

How to migrate the BIW 3.0B query

Dear All,
Is there any option to migrate the BIW 3.0B query to BI 7. We are recreating the cubes and ODS in BI 7. But for there queries any option is there to migrate them to BI 7??
Pls let me know the procedure.
Thanks
Sathiya

Hi Sathiya,
Pls find some SAP notes abt Query Migration:
BEx Query Designer 3.x & SAP Net Weaver 2004s
1..All existing 3.x queries can be edited with the SAP NetWeaver 2004s BEx Query Designer without further manual adaptation.
2.In general there is no migration and there is no new GUID or new objects in the database tables.
3.After editing with the new tool queries cannot be edited with the 3.x BEx Query Designer anymore.
4.The system logic allows you to still edit other BW3.5 queries in the BW3.5 Query Designer even if they are re-using elements of a query that has been edited with the NW2004s BEx Query Designer as long as the reusable elements use no 2004s features (i.e. planning settings, new aggregation on formulas, variables with multiple default values).
5.Queries created or adapted with the SAP NetWeaver 2004s BEx Query Designer will still appear in the Open Dialog of the 3.x tool but they cannot be opened anymore.
6.For those scenarios where customers do not want to use the SAP NetWeaver 2004s BEx Query Designer, SAP ships a 3.x version of the BEx Query Designer in addition to the SAP NetWeaver 2004s BEx Query Designer.
7.New capabilities are only implemented in the SAP NetWeaver 2004s Query Designer.
8.Query Views that were created before will still run after a query has been changed with the new BEx Query Designer.
9.In general, query views do not need to be migrated.
BEx Analyzer 3.x & SAP NetWeaver 2004s
1.Existing BW3.x queries and workbooks can be opened and executed with the SAP NetWeaver 2004s BEx Analyzer.
2.Standard workbooks are automatically upgraded, workbooks with customer coding will be upgraded with a best guess strategy.
3.Manual adaptation might be necessary to ensure the proper behavior of the workbook. (e.g. customer Visual Basic has to be manually adapted).
4After saving in the new tool, workbooks cannot be used in the 3.x BEx Analyzer. They will no longer appear in the Open dialog.
5.For those scenarios where customers do not want to use the SAP NetWeaver 2004s BEx Analyzer, SAP ships a 3.x version of the BEx Analyzer in addition to the SAP NetWeaver 2004s BEx Analyzer.
6.After migration, the old version of a workbook is still available in the old 3.x BEx Analyzer. Migration can be done as many times as need. Old workbooks are not deleted.
7.New capabilities are only implemented in the SAP NetWeaver 2004s BEx Analyzer
8.GIS functionality is only available via BEx Web (Web Application Designer).
The new BEx Analyzer gives access to InfoProviders, queries and query views but not to query views created with the new BEx Web Analyzer. On the other hand, query views created with the BEx Analyzer are available within the new BEx Web Analyzer.
9.Several Features of the new BEx Query Designer and BEx Web (e.g. in the area of exceptions and conditions) are not available in the new BEx Analyzer.
SAP does not recommend using NetWeaver 2004s queries and query views in the old 3.5 BEx Analyzer.
*Hope this helps**
Regards
CSM reddy

Using DS6.3 to manage the solaris servers accounts

Hi,
I plan to use DS6.3 to manage accounts of more than 50 solaris servers for login , access control and naming service.
Here are some questions need to help.
1 I want to strict the different accounts to login different hosts, how to plan the DIT ?
2 Now , in each solaris host there are their groups , if I put them in LDAP , how to avoid the duplicated group name? how to distinguish them for different hosts?
3 How to migrate the solaris accounts into LDAP as different hosts?
I ' m newbie for LDAP and DS , please give me advices
Thanks.
Jutsin

I would suggest you to use netgroups and store them in your LDAP.
Also read the "Solaris Naming Services" guide which is the right document for migrating naming services and such like to LDAP .
Hope this helps ..

When I bought my Mac Air OSX Version 10.9.2 my daughter helped me migrate the contents of my previous macbook. But in the process seems to have duplicated the iTunes library . The start up disk is almost full and plus it doesn't my iPhone. Please help!

When I bought my Mac Air OSX Version 10.9.2 my daughter helped me migrate the contents of my previous macbook. But in the process seems to have duplicated the iTunes library - How do I get rid of one. The start up disk is almost full and plus it doesn't synch properly with my iPhone 4S. Please help!

Hello nicky:
You should run repair disk from your software install DVD before you try anything else. The crash may have damaged some of your directories - and a possible cause of the "missing/not missing" tunes.
Barry

Is it possible to migrate the app from latest version to older version

Hi all,
I have a adf application in jdeveloper 11.1.1.4.0.Due to some issues i have to do it in jdeveloper 11g release 2 (11.1.1.2.0).Is it possible to migrate the application from latest version to older version of jdev.
Thanks.

It's not officially supported, but you can try a couple of things - first open the application in the old version and see if it works.
If it doesn't you can try creating a new application in the old version and then use the create project from existing source option to map to your existing code.
This all of course assumes that you didn't use features in the new version that are not available in the old version.

I'm trying to migrate from mobileMe to iCloud but I have Snow Leopard (the latest version). It looks like Lion is no longer available because Mountain Lion comes out next month (July). The problem is mobileMe ends on June 30th. How can I migrate?

I'm trying to migrate from mobileMe to iCloud but I have Snow Leopard (the latest version). It looks like Lion is no longer available because Mountain Lion comes out next month (July). The problem is mobileMe ends on June 30th. How can I migrate?
My iphone and my ipad are compatible but when I try to go to icloud on my phone it says to do it on my computer.
I would like to have my calendar, contacts, etc.. all sync like they do now. Is there a way to upgrade before June 30th? If not, will the gap be an issue or will I just be able to buy mountain lion and sync everything?
Any suggestions?
Thank you!

You can buy Lion in the App Store now, but move to iCloud now. If you wait to Mountain Lion, you will only have Mail in Snow Leopard, so you will lose syncing unless you use Lion or Mountain Lion. It's up to you

Hi, i try to migrate the HSC0 from version 6.1 to version 7.1 HELP !!!

Hi, i try to migrate the HSC0 from version 6.1 to version 7.1 and take this opportunity to consult on the installation of HSC0 where the PARMLIB member LKEYINFO (LKEYDEF) Product for this new version V 7.1 is telling me no longer supported, please I would like to confirm if this is so, and where i set the license application for this new version.
SLS1511I LKEYDEF DSN('SYS3.ORA.ELS.V700.TGT.VEN1.PARMLIB(-
SLS1511I LKEYINFO)')
SLS4639I LKEYDEF COMMAND IS NO LONGER SUPPORTED

Hi;
Is it related with Configuring and Managing SMC? If yes review:
http://docs.oracle.com/cd/E21395_02/en/E28330_02/E28330_02.pdf
Regard
Helios

Want a complete migration guide to upgrade 11.1.0.7 to 11.2.0.3 database using DBUA..We are implementing R12.1.3 version and then have to migrate the default 11gR1 database to 11.2.0.3 version. Please help with some step by step docs

Want a complete migration guide to upgrade 11.1.0.7 to 11.2.0.3 database using DBUA..We are implementing R12.1.3 version and then have to migrate the default 11gR1 database to 11.2.0.3 version. Please help with some step by step docs

Upgrade to 11.2.0.3 -- Interoperability Notes Oracle EBS R12 with Oracle Database 11gR2 (11.2.0.3) (Doc ID 1585578.1)
Upgrade to 11.2.0.4 (latest 11gR2 patchset certified with R12) -- Interoperability Notes EBS 12.0 and 12.1 with Database 11gR2 (Doc ID 1058763.1)
Thanks,
Hussein

What is the cpu architeture of solaris version of BPEL bundle, x86 or SPARC

Hello,
I'd like to know what is the cpu architeture of solaris version of BPEL bundle, x86 or SPARC located here: http://download.oracle.com/otn/solaris/ias/1012/as_sun_bpel_101200.cpio
The file is more than 400Mb in size, so I need to know before downloading.
Thanks.

hi,
are there any plans to release it for x86 (32 bit) platform. I'm also interested in testing beta versions of oracle software (specifically bpel, jdeveloper) on solaris 10 x86 platform, is there any beta CD available for these purposes?
thanks.

Several Solaris Versions(2.6,7,8) on the same disk. Possible ?

Hello folks!
I hope someone will be able to help me here. I've been after this problem
for weeks now!
Here it is:
for testing purposes I need to install Solaris 2.6, 7, and 8 on the same
machine (Ultra 2 enterprise).
I started with the installation of 2.6 with the following partitions
configuration:
- c0t0d0s0 root for Solaris 2.6
- c0t0d0s5 root for Solaris 7
- c0t0d0s6 root for Solaris 8
- c0t0d0s7 /home for all Solaris versions
The installation of 2.6 went fine and the system runs without problems.
However when I did the installations of the other two versions (7 and 8), I
configured manually the file system during installation and, of course, I
chose to preserve the existing installations. I also chose not to change the
default boot partition(c0t0d0s0).
The installation didn'T show any problem, but at the OpenBoot (OK prompt),
only the
OK boot disk
works. I assumed I had to boot partition 5 and 6 doing:
OK boot disk5
or
OK boot disk6
but it doesn't work. I assume there is some other setting I skipped, or some
wrong configuration.
Thanks a lot,
Pietro
PS Only the first partition c0t0d0s0 starts within the first Giga Byte. This
might be the problem ?

Hi ,
First check if the other OS are properly installed in the other partition. You can boot the system in 2.6 and mount the other partitions and see the directory structure. It is also good to use the same swap space for all the other OS.
At the OBP, disk0 or disk5 are the alias name for the device names. Each of the partition has a device name. At the OBP the device name for the disk can be obtained from the command:
ok>show-disks
or
ok>show-devs
On an Ultra 2 it would look something like this:
/sbus@1f,0/SUNW,fas@e,8800000/sd@0,0
The partitions are represented as alphabets, where "a" would represent partition 0, "b" for partition 1
so for the disk0 or the first disk and partition 4 would be:
/sbus@1f,0/SUNW,fas@e,8800000/sd@0,0:e
and partition 5 on disk1 or 2nd disk as:
/sbus@1f,0/SUNW,fas@e,8800000/sd@1,0:f
The device name can also be found by bootiing is Solaris 2.6 and using the command "format"
If you want to give alias name for the different partitions at the OBP so that you do not have to write the whole path of the device again, you can use the command "nvalias" at OBP
ok> nvalias <alias name> <the device path>
eg.
ok> nvalias sol8 /sbus@1f,0/SUNW,fas@e,8800000/sd@0,0:g
Please refer to http://docs.sun.com for more details on these commands
I hope that would help.
Regards
Anshul

Migrate ODI 10.1.3.5 to the last version

Hi,
I would like to migrate my ODI 10G (10.1.3.5) to the last version of ODI 11g (11.1.1.7 I think).
Do you know if it is possible and if an guide exist?
Thanks

Hi,
Yes. This is possible. You will have to use Upgrade Assistant utility that comes with ODI 11g. You can clone your ODI 10g repositories & provide info. of them by running the utility.
This upgrades your ODI 10g repositories to 11g & then you can connect to them after installing ODI 11g.
You can find detailed process here:
Upgrading Your Oracle Data Integrator Environment - 11g Release 1 (11.1.1)
Thanks,
Santy.

Hi, I have recently downloaded a trial version of Ps CC (up until then I have used Ps CS6). All my presets have migrated to the CC version from the CS6 one. However, I can't find any of the plug-ins which I have in CS6, such as Imagenomic Noiseware, Googl

Hi, I have recently downloaded a trial version of Ps CC (I am still using Ps CS6). All my presets have migrated very nicely to the CC version from the CS6 one. However, I can't find any of the plug-ins which I have in CS6, such as Imagenomic Noiseware, Google NIK Collection, etc. in the CC version. How do I "migrate" the plug-ins to Ps CC? I would appreciate some help with this. Thanks

Plug-Ins are not Presets. You need to install Plug-in into CC just like you had to install Plug-ins into CS6.

Migrating the Solaris version

Similar Messages

Maybe you are looking for