Migrating to btrfs
hey, i'm trying to change all my partitions to btrfs. will i run into any errors when i convert my root and boot partitionen (both ext4) into btrfs? or do i have to do any changes before rebooting? will grub2 support btrfs as root volume and fs?
best regards :>
Or, if you're not using things like LVM or RAID that you have to have an initrd for, you can just build BtrFS and the relevant hardware-modules you need to boot directly into the kernel. And you get the advantage of shaving a few seconds off of boot.
Last edited by Wintervenom (2010-06-05 05:09:31)
Similar Messages
-
[Solved] Shutdown/Reboot takes a long time
I do an upgrade every 5 days or so but it's been a while since I last rebooted--probably around 15-24 days. Since I haven't shutdown/rebooted for a while, I decided to do one today. I noticed that shutdown/reboot takes a long time, around 2-3 minutes whereas before, it would be instant and the behavior seems weird. Upon pressing shutdown or reboot:
1. Monitors become completely black and searches for a signal (by switching HDMI, DVI, etc). PC still on
2. After 1 minute, if reboot, I can hear the GPU fans spin like crazy. Shutdown doesn't do this, just quiet.
3. After waiting another minute, some output shows up really fast and the PC is rebooted or shutdown
This didn't happen before so I think it's probable that one of the updates did this. Unfortunately, I'm not sure how to tell which one.
I followed the section "Diagnosing Shutdown Problems" here on how to debug shutdown problems. I've got the systemd shutdown log but I can't tell where the problem is:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.3-3-ARCH (builduser@tobias) (gcc version 4.9.2 20150304 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Apr 8 14:10:00 CEST 2015
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0a8d7720-6c75-4f1e-b2e4-04d8196aa0fb rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bea34fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bea35000-0x00000000bea7dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bea7e000-0x00000000bea85fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bea86000-0x00000000bf5f9fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf5fa000-0x00000000bf5fbfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf5fc000-0x00000000bf60bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf60c000-0x00000000bf615fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf616000-0x00000000bf63afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf63b000-0x00000000bf67dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf67e000-0x00000000bf7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023f7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: MSI MS-7673/P67A-G43 (MS-7673), BIOS V1.11 04/14/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x23f800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 3 base 23F800000 mask FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fce60-0x000fce6f] mapped at [ffff8800000fce60]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23f600000-0x23f7fffff]
[ 0.000000] [mem 0x23f600000-0x23f7fffff] page 2M
[ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x220000000-0x23f5fffff]
[ 0.000000] [mem 0x220000000-0x23f5fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21fffffff]
[ 0.000000] [mem 0x200000000-0x21fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbea34fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbe9fffff] page 2M
[ 0.000000] [mem 0xbea00000-0xbea34fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf5fa000-0xbf5fbfff]
[ 0.000000] [mem 0xbf5fa000-0xbf5fbfff] page 4k
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbf67e000-0xbf7fffff]
[ 0.000000] [mem 0xbf67e000-0xbf7fffff] page 4k
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x3795c000-0x37ca5fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000BEA7E068 000054 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000BEA85148 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000BEA7E150 006FF4 (v02 ALASKA A M I 00000015 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000BF60DF80 000040
[ 0.000000] ACPI: APIC 0x00000000BEA85240 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000BEA852B8 000102 (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 0x00000000BEA853C0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000BEA85400 000038 (v01 ALASKA A M I 01072009 AMI. 00000004)
[ 0.000000] ACPI: ASF! 0x00000000BEA85438 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023f7fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x23f7f5000-0x23f7f8fff]
[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236e00000-ffff88023edfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x23f7fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xbea34fff]
[ 0.000000] node 0: [mem 0xbf5fa000-0xbf5fbfff]
[ 0.000000] node 0: [mem 0xbf67e000-0xbf7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x23f7fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x23f7fffff]
[ 0.000000] On node 0 totalpages: 2089813
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12143 pages used for memmap
[ 0.000000] DMA32 zone: 777145 pages, LIFO batch:31
[ 0.000000] Normal zone: 20448 pages used for memmap
[ 0.000000] Normal zone: 1308672 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbea35000-0xbea7dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbea7e000-0xbea85fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbea86000-0xbf5f9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf5fc000-0xbf60bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf60c000-0xbf615fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf616000-0xbf63afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf63b000-0xbf67dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xbf800000-0xfed1bfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88023f400000 s86336 r8192 d32448 u524288
[ 0.000000] pcpu-alloc: s86336 r8192 d32448 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2057137
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0a8d7720-6c75-4f1e-b2e4-04d8196aa0fb rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8146392K/8359252K available (5534K kernel code, 917K rwdata, 1744K rodata, 1164K init, 1156K bss, 212860K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:456 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3299.649 MHz processor
[ 0.000020] Calibrating delay loop (skipped), value calculated using timer frequency.. 6601.26 BogoMIPS (lpj=10998830)
[ 0.000022] pid_max: default: 32768 minimum: 301
[ 0.000025] ACPI: Core revision 20141107
[ 0.002006] ACPI: All ACPI Tables successfully acquired
[ 0.229873] Security Framework initialized
[ 0.229877] Yama: becoming mindful.
[ 0.230159] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.231159] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.231602] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.231607] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.231738] Initializing cgroup subsys memory
[ 0.231741] Initializing cgroup subsys devices
[ 0.231743] Initializing cgroup subsys freezer
[ 0.231744] Initializing cgroup subsys net_cls
[ 0.231745] Initializing cgroup subsys blkio
[ 0.231759] CPU: Physical Processor ID: 0
[ 0.231759] CPU: Processor Core ID: 0
[ 0.231762] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.231764] mce: CPU supports 9 MCE banks
[ 0.231772] CPU0: Thermal monitoring enabled (TM1)
[ 0.231778] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.231839] Freeing SMP alternatives memory: 20K (ffffffff81a0a000 - ffffffff81a0f000)
[ 0.232422] ftrace: allocating 21171 entries in 83 pages
[ 0.238717] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.271684] smpboot: CPU0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (fam: 06, model: 2a, stepping: 07)
[ 0.271688] TSC deadline timer enabled
[ 0.271700] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[ 0.271711] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.271712] ... version: 3
[ 0.271712] ... bit width: 48
[ 0.271713] ... generic registers: 8
[ 0.271714] ... value mask: 0000ffffffffffff
[ 0.271714] ... max period: 0000ffffffffffff
[ 0.271715] ... fixed-purpose events: 3
[ 0.271715] ... event mask: 00000007000000ff
[ 0.291699] x86: Booting SMP configuration:
[ 0.291700] .... node #0, CPUs: #1
[ 0.304842] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.305029] #2 #3
[ 0.334799] x86: Booted up 1 node, 4 CPUs
[ 0.334802] smpboot: Total of 4 processors activated (26407.07 BogoMIPS)
[ 0.336656] devtmpfs: initialized
[ 0.338107] PM: Registering ACPI NVS region [mem 0xbea35000-0xbea7dfff] (299008 bytes)
[ 0.338111] PM: Registering ACPI NVS region [mem 0xbf60c000-0xbf615fff] (40960 bytes)
[ 0.338111] PM: Registering ACPI NVS region [mem 0xbf63b000-0xbf67dfff] (274432 bytes)
[ 0.338196] pinctrl core: initialized pinctrl subsystem
[ 0.338227] RTC time: 18:49:17, date: 04/22/15
[ 0.338286] NET: Registered protocol family 16
[ 0.349856] cpuidle: using governor ladder
[ 0.363177] cpuidle: using governor menu
[ 0.363192] ACPI: bus type PCI registered
[ 0.363193] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.363233] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.363234] PCI: not using MMCONFIG
[ 0.363235] PCI: Using configuration type 1 for base access
[ 0.376685] ACPI: Added _OSI(Module Device)
[ 0.376686] ACPI: Added _OSI(Processor Device)
[ 0.376687] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.376688] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.377668] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.378832] ACPI: Dynamic OEM Table Load:
[ 0.378835] ACPI: SSDT 0xFFFF880235BFDE40 000084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.379146] ACPI: Interpreter enabled
[ 0.379150] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[ 0.379156] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.379157] ACPI: Using IOAPIC for interrupt routing
[ 0.379168] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.379198] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.379380] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.379496] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.381659] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.381662] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.381725] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[ 0.381755] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.381757] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[ 0.381758] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[ 0.381759] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.381932] PCI host bridge to bus 0000:00
[ 0.381934] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.381935] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.381936] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.381936] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.381937] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.381938] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.381939] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.381940] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[ 0.381945] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[ 0.381993] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.382014] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.382032] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.382079] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.382098] pci 0000:00:16.0: reg 0x10: [mem 0xfe708000-0xfe70800f 64bit]
[ 0.382164] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.382218] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.382235] pci 0000:00:1a.0: reg 0x10: [mem 0xfe707000-0xfe7073ff]
[ 0.382315] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.382339] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.382365] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.382378] pci 0000:00:1b.0: reg 0x10: [mem 0xfe700000-0xfe703fff 64bit]
[ 0.382443] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.382493] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.382628] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.382664] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.382689] pci 0000:00:1c.4: [8086:244e] type 01 class 0x060401
[ 0.382761] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.382787] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.382810] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[ 0.382882] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.382908] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.382932] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
[ 0.383004] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.383029] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.383056] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.383074] pci 0000:00:1d.0: reg 0x10: [mem 0xfe706000-0xfe7063ff]
[ 0.383154] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.383181] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.383206] pci 0000:00:1f.0: [8086:1c46] type 00 class 0x060100
[ 0.383340] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 0.383355] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
[ 0.383361] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
[ 0.383366] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
[ 0.383372] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
[ 0.383378] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.383384] pci 0000:00:1f.2: reg 0x24: [mem 0xfe705000-0xfe7057ff]
[ 0.383422] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.383461] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.383473] pci 0000:00:1f.3: reg 0x10: [mem 0xfe704000-0xfe7040ff 64bit]
[ 0.383490] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.383561] pci 0000:01:00.0: [1002:6719] type 00 class 0x030000
[ 0.383571] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.383579] pci 0000:01:00.0: reg 0x18: [mem 0xfe620000-0xfe63ffff 64bit]
[ 0.383584] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.383593] pci 0000:01:00.0: reg 0x30: [mem 0xfe600000-0xfe61ffff pref]
[ 0.383621] pci 0000:01:00.0: supports D1 D2
[ 0.383650] pci 0000:01:00.1: [1002:aa80] type 00 class 0x040300
[ 0.383660] pci 0000:01:00.1: reg 0x10: [mem 0xfe640000-0xfe643fff 64bit]
[ 0.383708] pci 0000:01:00.1: supports D1 D2
[ 0.389829] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.389830] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.389832] pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
[ 0.389833] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.389906] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.389985] pci 0000:03:00.0: [1b21:1080] type 01 class 0x060400
[ 0.390139] pci 0000:03:00.0: supports D1 D2
[ 0.390140] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.396493] pci 0000:00:1c.4: PCI bridge to [bus 03-04] (subtractive decode)
[ 0.396501] pci 0000:00:1c.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.396502] pci 0000:00:1c.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.396503] pci 0000:00:1c.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.396504] pci 0000:00:1c.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.396505] pci 0000:00:1c.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.396506] pci 0000:00:1c.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.396507] pci 0000:00:1c.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 0.396651] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.396745] pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.396772] pci 0000:05:00.0: reg 0x10: [mem 0xfe500000-0xfe501fff 64bit]
[ 0.396910] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.403155] pci 0000:00:1c.5: PCI bridge to [bus 05]
[ 0.403160] pci 0000:00:1c.5: bridge window [mem 0xfe500000-0xfe5fffff]
[ 0.403227] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
[ 0.403248] pci 0000:06:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.403279] pci 0000:06:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.403298] pci 0000:06:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.403403] pci 0000:06:00.0: supports D1 D2
[ 0.403404] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.409816] pci 0000:00:1c.6: PCI bridge to [bus 06]
[ 0.409819] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
[ 0.409826] pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.410049] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.410074] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.410098] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.410122] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.410146] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.410170] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.410194] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.410218] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.410250] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.410300] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.410301] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.410302] vgaarb: loaded
[ 0.410303] vgaarb: bridge control possible 0000:01:00.0
[ 0.410339] PCI: Using ACPI for IRQ routing
[ 0.415815] PCI: pci_cache_line_size set to 64 bytes
[ 0.415855] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.415856] e820: reserve RAM buffer [mem 0xbea35000-0xbfffffff]
[ 0.415857] e820: reserve RAM buffer [mem 0xbf5fc000-0xbfffffff]
[ 0.415857] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[ 0.415858] e820: reserve RAM buffer [mem 0x23f800000-0x23fffffff]
[ 0.415918] NetLabel: Initializing
[ 0.415919] NetLabel: domain hash size = 128
[ 0.415919] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.415927] NetLabel: unlabeled traffic allowed by default
[ 0.415940] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.415942] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.417956] Switched to clocksource hpet
[ 0.420722] pnp: PnP ACPI init
[ 0.420798] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.420799] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.420800] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.420801] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.420802] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.420804] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.420902] system 00:01: [io 0x0a00-0x0a0f] has been reserved
[ 0.420903] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.420993] pnp 00:02: [dma 0 disabled]
[ 0.421016] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.421032] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.421058] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.421059] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.421149] system 00:05: [io 0x0400-0x0453] could not be reserved
[ 0.421150] system 00:05: [io 0x0458-0x047f] has been reserved
[ 0.421151] system 00:05: [io 0x1180-0x119f] has been reserved
[ 0.421152] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.421153] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.421154] system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.421155] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.421157] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.421158] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.421187] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.421188] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.421295] pnp: PnP ACPI: found 7 devices
[ 0.427004] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.427006] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.427007] pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
[ 0.427009] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.427011] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.427026] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.427044] pci 0000:00:1c.4: PCI bridge to [bus 03-04]
[ 0.427053] pci 0000:00:1c.5: PCI bridge to [bus 05]
[ 0.427056] pci 0000:00:1c.5: bridge window [mem 0xfe500000-0xfe5fffff]
[ 0.427063] pci 0000:00:1c.6: PCI bridge to [bus 06]
[ 0.427064] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
[ 0.427070] pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.427075] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.427076] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.427077] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.427077] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.427078] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.427079] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.427080] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.427081] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.427082] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
[ 0.427083] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.427084] pci_bus 0000:03: resource 4 [io 0x0000-0x03af]
[ 0.427085] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7]
[ 0.427086] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df]
[ 0.427087] pci_bus 0000:03: resource 7 [io 0x0d00-0xffff]
[ 0.427087] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.427088] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.427089] pci_bus 0000:03: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.427090] pci_bus 0000:05: resource 1 [mem 0xfe500000-0xfe5fffff]
[ 0.427091] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
[ 0.427092] pci_bus 0000:06: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.427107] NET: Registered protocol family 2
[ 0.427218] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.427305] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.427411] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.427422] TCP: reno registered
[ 0.427428] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.427446] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.427479] NET: Registered protocol family 1
[ 0.427627] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.427703] PCI: CLS 64 bytes, default 64
[ 0.427731] Unpacking initramfs...
[ 0.458276] Freeing initrd memory: 3368K (ffff88003795c000 - ffff880037ca6000)
[ 0.458282] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.458284] software IO TLB [mem 0xbaa35000-0xbea35000] (64MB) mapped at [ffff8800baa35000-ffff8800bea34fff]
[ 0.458388] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 0.458447] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x12
[ 0.458451] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x12
[ 0.458455] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x12
[ 0.458459] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x12
[ 0.458489] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.458503] Scanning for low memory corruption every 60 seconds
[ 0.458643] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.458653] Initialise system trusted keyring
[ 0.458879] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.459596] zpool: loaded
[ 0.459598] zbud: loaded
[ 0.459684] VFS: Disk quotas dquot_6.5.2
[ 0.459702] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.459788] Key type big_key registered
[ 0.459886] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.459910] io scheduler noop registered
[ 0.459911] io scheduler deadline registered
[ 0.459926] io scheduler cfq registered (default)
[ 0.460230] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.460238] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.460245] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[ 0.460245] vesafb: scrolling: redraw
[ 0.460246] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.460257] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 5824k, total 5824k
[ 0.507010] Console: switching to colour frame buffer device 175x65
[ 0.553487] fb0: VESA VGA frame buffer device
[ 0.553501] intel_idle: MWAIT substates: 0x1120
[ 0.553502] intel_idle: v0.4 model 0x2A
[ 0.553502] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.553594] GHES: HEST is not enabled!
[ 0.553630] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.574150] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.574369] Linux agpgart interface v0.103
[ 0.574402] rtc_cmos 00:03: RTC can wake from S4
[ 0.574506] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.574530] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.574537] Intel P-state driver initializing.
[ 0.574635] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.575069] TCP: cubic registered
[ 0.575206] NET: Registered protocol family 10
[ 0.575527] NET: Registered protocol family 17
[ 0.576245] Loading compiled-in X.509 certificates
[ 0.576267] registered taskstats version 1
[ 0.577040] Magic number: 11:338:848
[ 0.577156] rtc_cmos 00:03: setting system clock to 2015-04-22 18:49:17 UTC (1429728557)
[ 0.577255] PM: Hibernation image not present or could not be loaded.
[ 0.577672] Freeing unused kernel memory: 1164K (ffffffff818e7000 - ffffffff81a0a000)
[ 0.577674] Write protecting the kernel read-only data: 8192k
[ 0.578177] Freeing unused kernel memory: 600K (ffff88000156a000 - ffff880001600000)
[ 0.578369] Freeing unused kernel memory: 304K (ffff8800017b4000 - ffff880001800000)
[ 0.586926] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.594161] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.594538] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.594602] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.596674] ACPI: bus type USB registered
[ 0.596690] usbcore: registered new interface driver usbfs
[ 0.596697] usbcore: registered new interface driver hub
[ 0.596714] usbcore: registered new device driver usb
[ 0.596929] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.597010] ehci-pci: EHCI PCI platform driver
[ 0.597090] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.597095] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.597107] ehci-pci 0000:00:1a.0: debug port 2
[ 0.598329] SCSI subsystem initialized
[ 0.600997] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.601009] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe707000
[ 0.601141] libata version 3.00 loaded.
[ 0.607823] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.607929] hub 1-0:1.0: USB hub found
[ 0.607934] hub 1-0:1.0: 2 ports detected
[ 0.608004] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 0.608009] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 2
[ 0.608319] hub 2-0:1.0: USB hub found
[ 0.608327] hub 2-0:1.0: 2 ports detected
[ 0.608382] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 0.608384] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[ 0.608386] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.608389] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 0.608405] ehci-pci 0000:00:1d.0: debug port 2
[ 0.611688] hub 3-0:1.0: USB hub found
[ 0.611696] hub 3-0:1.0: 2 ports detected
[ 0.612303] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.612313] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe706000
[ 0.621118] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.621236] hub 4-0:1.0: USB hub found
[ 0.621248] hub 4-0:1.0: 2 ports detected
[ 0.621321] ahci 0000:00:1f.2: version 3.0
[ 0.634481] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 0.634487] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 0.668448] scsi host0: ahci
[ 0.668750] scsi host1: ahci
[ 0.669100] scsi host2: ahci
[ 0.669412] scsi host3: ahci
[ 0.669697] scsi host4: ahci
[ 0.669967] scsi host5: ahci
[ 0.670051] ata1: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705100 irq 30
[ 0.670054] ata2: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705180 irq 30
[ 0.670057] ata3: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705200 irq 30
[ 0.670059] ata4: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705280 irq 30
[ 0.670061] ata5: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705300 irq 30
[ 0.670064] ata6: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705380 irq 30
[ 0.914200] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.927545] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 0.987472] ata5: SATA link down (SStatus 0 SControl 300)
[ 0.987497] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.987521] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.987543] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.987563] ata6: SATA link down (SStatus 0 SControl 300)
[ 0.987584] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.987877] ata2.00: supports DRM functions and may not be fully accessible
[ 0.988115] ata3.00: ATAPI: TSSTcorp CDDVDW SH-S243D, SB00, max UDMA/100
[ 0.988210] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 0.988214] ata1.00: ATA-9: Samsung SSD 840 Series, DXT07B0Q, max UDMA/133
[ 0.988217] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.988682] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 0.988746] ata1.00: configured for UDMA/133
[ 0.988881] ata3.00: configured for UDMA/100
[ 0.989027] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 7B0Q PQ: 0 ANSI: 5
[ 0.989649] ata4.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133
[ 0.989653] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.990752] ata2.00: disabling queued TRIM support
[ 0.990755] ata2.00: ATA-9: Crucial_CT240M500SSD1, MU05, max UDMA/133
[ 0.990757] ata2.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.992466] ata4.00: configured for UDMA/133
[ 0.994299] ata2.00: supports DRM functions and may not be fully accessible
[ 0.997177] ata2.00: disabling queued TRIM support
[ 1.000401] ata2.00: configured for UDMA/133
[ 1.000669] scsi 1:0:0:0: Direct-Access ATA Crucial_CT240M50 MU05 PQ: 0 ANSI: 5
[ 1.001813] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S243D SB00 PQ: 0 ANSI: 5
[ 1.011521] scsi 3:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 1D05 PQ: 0 ANSI: 5
[ 1.015296] ata1.00: Enabling discard_zeroes_data
[ 1.015310] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.015364] sd 0:0:0:0: [sda] Write Protect is off
[ 1.015367] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.015385] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.015513] sd 1:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/223 GiB)
[ 1.015517] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.015524] ata1.00: Enabling discard_zeroes_data
[ 1.015532] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.015618] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.015621] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.015636] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.015641] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.015657] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.015717] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.015779] sda: sda1 sda2
[ 1.016099] ata1.00: Enabling discard_zeroes_data
[ 1.016176] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.016225] sdb: sdb1
[ 1.016696] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.022237] sdc: sdc1 sdc2
[ 1.022726] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.025940] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.025945] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.026137] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.038098] hub 1-1:1.0: USB hub found
[ 1.038285] hub 1-1:1.0: 6 ports detected
[ 1.051455] hub 4-1:1.0: USB hub found
[ 1.051648] hub 4-1:1.0: 8 ports detected
[ 1.298000] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.303924] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[ 1.317239] usb 4-1.2: new full-speed USB device number 3 using ehci-pci
[ 1.443336] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[ 1.443537] systemd[1]: Detected architecture 'x86-64'.
[ 1.443740] systemd[1]: Set hostname to <arch>.
[ 1.460317] tsc: Refined TSC clocksource calibration: 3300.020 MHz
[ 1.473794] usb 1-1.5: new high-speed USB device number 4 using ehci-pci
[ 1.497743] systemd[1]: Unit type .busname is not supported on this system.
[ 1.537625] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 1.537643] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 1.537662] systemd[1]: Reached target Remote File Systems.
[ 1.537672] systemd[1]: Starting Remote File Systems.
[ 1.537692] systemd[1]: Reached target Encrypted Volumes.
[ 1.537701] systemd[1]: Starting Encrypted Volumes.
[ 1.537748] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 1.537759] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 1.537800] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 1.537810] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 1.538002] systemd[1]: Created slice Root Slice.
[ 1.538014] systemd[1]: Starting Root Slice.
[ 1.538060] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 1.538070] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 1.538120] systemd[1]: Listening on Journal Socket.
[ 1.538134] systemd[1]: Starting Journal Socket.
[ 1.538265] systemd[1]: Created slice User and Session Slice.
[ 1.538276] systemd[1]: Starting User and Session Slice.
[ 1.545589] systemd[1]: Listening on Journal Audit Socket.
[ 1.545747] systemd[1]: Created slice System Slice.
[ 1.545765] systemd[1]: Starting System Slice.
[ 1.546248] systemd[1]: Mounting Huge Pages File System...
[ 1.546789] systemd[1]: Mounting Debug File System...
[ 1.546970] systemd[1]: Created slice system-dhcpcd.slice.
[ 1.546987] systemd[1]: Starting system-dhcpcd.slice.
[ 1.547561] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 1.548678] systemd[1]: Starting Setup Virtual Console...
[ 1.549285] systemd[1]: Started Set Up Additional Binary Formats.
[ 1.550613] systemd[1]: Starting Load Kernel Modules...
[ 1.550645] systemd[1]: Started File System Check on Root Device.
[ 1.551159] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 1.551679] systemd[1]: Mounting POSIX Message Queue File System...
[ 1.551836] systemd[1]: Created slice system-getty.slice.
[ 1.551850] systemd[1]: Starting system-getty.slice.
[ 1.551870] systemd[1]: Reached target Slices.
[ 1.551883] systemd[1]: Starting Slices.
[ 1.551931] systemd[1]: Listening on udev Kernel Socket.
[ 1.551941] systemd[1]: Starting udev Kernel Socket.
[ 1.551986] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.551997] systemd[1]: Starting Journal Socket (/dev/log).
[ 1.552492] systemd[1]: Starting Journal Service...
[ 1.552545] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 1.552561] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 1.552600] systemd[1]: Listening on udev Control Socket.
[ 1.552611] systemd[1]: Starting udev Control Socket.
[ 1.552659] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 1.552669] systemd[1]: Starting LVM2 metadata daemon socket.
[ 1.552689] systemd[1]: Reached target Login Prompts.
[ 1.552701] systemd[1]: Starting Login Prompts.
[ 1.553185] systemd[1]: Starting udev Coldplug all Devices...
[ 1.553231] systemd[1]: Listening on Delayed Shutdown Socket.
[ 1.553249] systemd[1]: Starting Delayed Shutdown Socket.
[ 1.554439] EXT4-fs (sdb1): re-mounted. Opts: data=ordered
[ 1.555736] systemd[1]: Mounting Temporary Directory...
[ 1.556329] systemd[1]: Mounted POSIX Message Queue File System.
[ 1.556363] systemd[1]: Mounted Huge Pages File System.
[ 1.556388] systemd[1]: Mounted Debug File System.
[ 1.556779] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 1.557030] systemd[1]: Started Setup Virtual Console.
[ 1.557256] systemd[1]: Started Remount Root and Kernel File Systems.
[ 1.557431] systemd[1]: Mounted Temporary Directory.
[ 1.558591] hub 1-1.5:1.0: USB hub found
[ 1.558901] hub 1-1.5:1.0: 4 ports detected
[ 1.560366] vboxdrv: Found 4 processor cores.
[ 1.561065] vboxdrv: fAsync=0 offMin=0x2ca offMax=0x6c0c
[ 1.561137] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 1.561139] vboxdrv: Successfully loaded version 4.3.26_OSE (interface 0x001a000a).
[ 1.561712] systemd[1]: Started Load Kernel Modules.
[ 1.568012] systemd-journald[149]: Failed to set file attributes: Inappropriate ioctl for device
[ 1.569830] systemd[1]: Started udev Coldplug all Devices.
[ 1.575918] systemd[1]: Mounted FUSE Control File System.
[ 1.576374] systemd[1]: Mounting Configuration File System...
[ 1.576805] systemd[1]: Starting Apply Kernel Variables...
[ 1.576856] systemd[1]: Started Rebuild Dynamic Linker Cache.
[ 1.582712] systemd[1]: Started Rebuild Hardware Database.
[ 1.582739] systemd[1]: Started First Boot Wizard.
[ 1.582757] systemd[1]: Started Create System Users.
[ 1.583212] systemd[1]: Starting Load/Save Random Seed...
[ 1.583784] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 1.584599] systemd[1]: Mounted Configuration File System.
[ 1.587256] systemd[1]: Started Load/Save Random Seed.
[ 1.589801] systemd[1]: Started Apply Kernel Variables.
[ 1.607967] systemd[1]: Started Create Static Device Nodes in /dev.
[ 1.608452] systemd[1]: Starting udev Kernel Device Manager...
[ 1.608476] systemd[1]: Reached target Local File Systems (Pre).
[ 1.608492] systemd[1]: Starting Local File Systems (Pre).
[ 1.626961] usb 1-1.6: new low-speed USB device number 5 using ehci-pci
[ 1.637443] systemd[1]: Started udev Kernel Device Manager.
[ 1.649393] systemd[1]: Started Journal Service.
[ 1.653641] systemd-journald[149]: Received request to flush runtime journal from PID 1
[ 1.813303] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 1.813310] ACPI: Power Button [PWRB]
[ 1.813368] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.813371] ACPI: Power Button [PWRF]
[ 1.817850] wmi: Mapper loaded
[ 1.855141] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.872038] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.872046] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.877249] r8169 0000:06:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c7a000, 8c:89:a5:16:c4:7d, XID 0c900800 IRQ 32
[ 1.877252] r8169 0000:06:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.880259] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.907839] [drm] Initialized drm 1.1.0 20060810
[ 1.910066] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 1.911296] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.912890] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 1.913064] fuse init (API version 7.23)
[ 1.914070] usblp 1-1.4:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x024A
[ 1.914093] usbcore: registered new interface driver usblp
[ 1.916048] AVX version of gcm_enc/dec engaged.
[ 1.916050] AES CTR mode by8 optimization enabled
[ 1.924639] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
[ 1.925198] usbcore: registered new interface driver usbhid
[ 1.925200] usbhid: USB HID core driver
[ 1.926129] sound hdaudioC0D1: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 1.926132] sound hdaudioC0D1: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.926133] sound hdaudioC0D1: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 1.926134] sound hdaudioC0D1: mono: mono_out=0x0
[ 1.926136] sound hdaudioC0D1: dig-out=0x11/0x1e
[ 1.926137] sound hdaudioC0D1: inputs:
[ 1.926139] sound hdaudioC0D1: Front Mic=0x19
[ 1.926140] sound hdaudioC0D1: Rear Mic=0x18
[ 1.926142] sound hdaudioC0D1: Line=0x1a
[ 1.934672] iTCO_vendor_support: vendor-support=0
[ 1.934826] [drm] radeon kernel modesetting enabled.
[ 1.935110] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 1.935141] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 1.935229] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 1.939587] r8169 0000:06:00.0 enp6s0: renamed from eth0
[ 1.939661] gpio_ich: GPIO from 436 to 511 on gpio_ich
[ 1.941371] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input2
[ 1.941824] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
[ 1.941825] AMD IOMMUv2 functionality not available on this system
[ 1.943447] CRAT table not found
[ 1.943449] Finished initializing topology ret=0
[ 1.943479] kfd kfd: Initialized module
[ 1.943669] checking generic (c0000000 5b0000) vs hw (c0000000 10000000)
[ 1.943670] fb: switching to radeondrmfb from VESA VGA
[ 1.943685] Console: switching to colour dummy device 80x25
[ 1.943797] random: nonblocking pool is initialized
[ 1.943880] [drm] initializing kernel modesetting (CAYMAN 0x1002:0x6719 0x1787:0x2307).
[ 1.943890] [drm] register mmio base: 0xFE620000
[ 1.943891] [drm] register mmio size: 131072
[ 1.943923] ATOM BIOS: CAYMAN
[ 1.943974] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[ 1.943975] radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
[ 1.943977] [drm] Detected VRAM RAM=2048M, BAR=256M
[ 1.943977] [drm] RAM width 256bits DDR
[ 1.944037] [TTM] Zone kernel: Available graphics memory: 4075924 kiB
[ 1.944038] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 1.944039] [TTM] Initializing pool allocator
[ 1.944043] [TTM] Initializing DMA pool allocator
[ 1.944058] [drm] radeon: 2048M of VRAM memory ready
[ 1.944059] [drm] radeon: 1024M of GTT memory ready.
[ 1.944068] [drm] Loading CAYMAN Microcode
[ 1.946470] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 1.946562] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 1.946609] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 1.946674] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 1.946720] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 1.946769] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.946769] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 1.946809] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 1.946849] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 1.951281] [drm] Internal thermal controller with fan control
[ 1.955166] [drm] radeon: dpm initialized
[ 1.955974] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 1.956619] input: Lite-On Technology Corp. Goldtouch USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:04CA:005B.0004/input/input15
[ 1.957600] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 1.957733] intel_rapl: Found RAPL domain package
[ 1.957736] intel_rapl: Found RAPL domain core
[ 1.978933] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[ 1.979020] radeon 0000:01:00.0: WB enabled
[ 1.979022] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880234d8bc00
[ 1.979798] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90010f32118
[ 1.979800] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff880234d8bc04
[ 1.979801] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff880234d8bc08
[ 1.979802] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880234d8bc0c
[ 1.979804] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff880234d8bc10
[ 1.979805] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.979806] [drm] Driver supports precise vblank timestamp query.
[ 1.979807] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 1.979844] radeon 0000:01:00.0: radeon: using MSI.
[ 1.980067] [drm] radeon: irq initialized.
[ 1.998991] [drm] ring test on 0 succeeded in 2 usecs
[ 1.998999] [drm] ring test on 3 succeeded in 4 usecs
[ 1.999006] [drm] ring test on 4 succeeded in 4 usecs
[ 2.010399] hid-generic 0003:04CA:005B.0004: input,hidraw1: USB HID v1.10 Keyboard [Lite-On Technology Corp. Goldtouch USB Keyboard] on usb-0000:00:1a.0-1.6/input0
[ 2.012308] input: Lite-On Technology Corp. Goldtouch USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:04CA:005B.0005/input/input16
[ 2.069928] input: Logitech M570 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.2/0003:046D:C52B.0003/0003:046D:1028.0006/input/input17
[ 2.080530] Adding 4194300k swap on /mnt/LinuxStorage/swap. Priority:-1 extents:4 across:4464636k FS
[ 2.116506] hid-generic 0003:04CA:005B.0005: input,hiddev0,hidraw2: USB HID v1.10 Device [Lite-On Technology Corp. Goldtouch USB Keyboard] on usb-0000:00:1a.0-1.6/input1
[ 2.116542] logitech-hidpp-device 0003:046D:1028.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech M570] on usb-0000:00:1d.0-1.2:1
[ 2.118008] mousedev: PS/2 mouse device common for all mice
[ 2.175912] [drm] ring test on 5 succeeded in 2 usecs
[ 2.175917] [drm] UVD initialized successfully.
[ 2.176481] [drm] ib test on ring 0 succeeded in 0 usecs
[ 2.176922] [drm] ib test on ring 3 succeeded in 0 usecs
[ 2.177365] [drm] ib test on ring 4 succeeded in 0 usecs
[ 2.328709] [drm] ib test on ring 5 succeeded
[ 2.329264] [drm] Radeon Display Connectors
[ 2.329265] [drm] Connector 0:
[ 2.329266] [drm] DP-1
[ 2.329267] [drm] HPD5
[ 2.329268] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 2.329268] [drm] Encoders:
[ 2.329269] [drm] DFP1: INTERNAL_UNIPHY2
[ 2.329269] [drm] Connector 1:
[ 2.329270] [drm] DP-2
[ 2.329270] [drm] HPD4
[ 2.329271] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 2.329271] [drm] Encoders:
[ 2.329272] [drm] DFP2: INTERNAL_UNIPHY2
[ 2.329272] [drm] Connector 2:
[ 2.329273] [drm] HDMI-A-1
[ 2.329273] [drm] HPD6
[ 2.329274] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 2.329274] [drm] Encoders:
[ 2.329275] [drm] DFP3: INTERNAL_UNIPHY1
[ 2.329275] [drm] Connector 3:
[ 2.329276] [drm] DVI-D-1
[ 2.329276] [drm] HPD1
[ 2.329277] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 2.329277] [drm] Encoders:
[ 2.329278] [drm] DFP4: INTERNAL_UNIPHY1
[ 2.329278] [drm] Connector 4:
[ 2.329279] [drm] DVI-I-1
[ 2.329279] [drm] HPD3
[ 2.329280] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[ 2.329280] [drm] Encoders:
[ 2.329281] [drm] DFP5: INTERNAL_UNIPHY
[ 2.329282] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 2.408814] [drm] fb mappable at 0xC0475000
[ 2.408816] [drm] vram apper at 0xC0000000
[ 2.408816] [drm] size 8294400
[ 2.408817] [drm] fb depth is 24
[ 2.408818] [drm] pitch is 7680
[ 2.408899] fbcon: radeondrmfb (fb0) is primary device
[ 2.435470] Console: switching to colour frame buffer device 240x67
[ 2.438497] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 2.438498] radeon 0000:01:00.0: registered panic notifier
[ 2.449565] [drm] Initialized radeon 2.40.0 20080528 for 0000:01:00.0 on minor 0
[ 2.459456] Switched to clocksource tsc
[ 2.490495] cfg80211: Calling CRDA to update world regulatory domain
[ 2.687833] r8169 0000:06:00.0 enp6s0: link down
[ 2.687846] r8169 0000:06:00.0 enp6s0: link down
[ 2.687870] IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
[ 20.764979] r8169 0000:06:00.0 enp6s0: link up
[ 20.764992] IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready
[ 256.173829] device-mapper: uevent: version 1.0.3
[ 256.173991] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: [email protected]
[ 256.713510] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 256.718933] JFS: nTxBlock = 8192, nTxLock = 65536
[ 256.730155] ntfs: driver 2.1.31 [Flags: R/W MODULE].
[ 256.800019] raid6: sse2x1 7801 MB/s
[ 256.856622] raid6: sse2x2 11630 MB/s
[ 256.913233] raid6: sse2x4 15648 MB/s
[ 256.913234] raid6: using algorithm sse2x4 (15648 MB/s)
[ 256.913235] raid6: using ssse3x2 recovery algorithm
[ 256.913829] xor: automatically using best checksumming function:
[ 256.946535] avx : 32756.400 MB/sec
[ 256.954986] Btrfs loaded
[ 603.210136] watchdog watchdog0: watchdog did not stop!
[ 603.211033] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[ 603.244960] systemd-journald[149]: Received SIGTERM from PID 1 (systemd-shutdow).
[ 603.321496] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[ 603.325328] systemd-shutdown[1]: Hardware watchdog 'iTCO_wdt', version 0
[ 603.325462] systemd-shutdown[1]: Unmounting file systems.
[ 603.393079] EXT4-fs (sdb1): re-mounted. Opts: (null)
[ 603.402416] EXT4-fs (sdb1): re-mounted. Opts: (null)
[ 603.402433] systemd-shutdown[1]: All filesystems unmounted.
[ 603.402438] systemd-shutdown[1]: Deactivating swaps.
[ 603.402507] systemd-shutdown[1]: All swaps deactivated.
[ 603.402511] systemd-shutdown[1]: Detaching loop devices.
[ 603.403097] systemd-shutdown[1]: All loop devices detached.
[ 603.403101] systemd-shutdown[1]: Detaching DM devices.
[ 603.403156] systemd-shutdown[1]: All DM devices detached.
[ 603.412388] EXT4-fs (sdb1): re-mounted. Opts: data=ordered
Would appreciate some input regarding this. Thanks!
EDIT: This is on gnome 3.16. Not sure if that matters.
Last edited by devrepublic (2015-05-13 03:24:19)ksu wrote:Thanks alot for the input guys. Since I want to start from scratch anyways I'll definitively dig deeper into the subject. BTRFS snapshot feature and RAID1 by simply mirroring two partitions sound awesome, and the subvolume feature seems to be exactly what I need for my USB setup, giving me alot of flexibility. But if there are really that many reports of random data loss then I'll also do some research into that direction to see what this is all about. I admit I'm a linux noob, but it's a lot of fun to learn all this stuff.
Be sure to read this: https://btrfs.wiki.kernel.org/index.php/Gotchas
From my own experience, I can say that:
1. I've never had an issue nor data loss with BTRFS RAID1 root partition on a single disk (other than the first issue on the above list).
2. I had recurring problems with BTRFS RAID1 non-root partition on a single disk not being able to mount (had to reboot random number of times to get it to mount). However, I suspect this was caused not just by BTRFS but the combination of BTRFS+LVM+dmcrypt which is a rather complex and unusual setup. I had somewhat similar issue with ZFS.
3. I had BTRFS checkdisk report strange, non-critical, unfixable errors on my non-raid BTRFS root partition, but it never corrupted or lost any data. I simply copied the data to another partition, recreated the root partition and all was fine again.
4. The last time I lost data on a single partition because of BTRFS was 17 months ago. The last time BTRFS snapshot saved me from losing data was yesterday.
5. I migrated from BTRFS to ZFS for my backup server and will possibly do so for my work machines. ZFS is more elegant, mature and I have seen no complaints of losing data because of it. However, ZFS is complicated and somewhat restrictive to setup for a data partition, and many times more difficult to setup as root partition. I would not consider it for a non-permanent USB installation.
6. What we committed here is a massive thread hijacking.
Last edited by Lockheed (2015-04-24 05:27:51) -
How can I Migrate/Split itunes/icloud account for a large family now that they have family sharing
Ok, now that Apple has finally come out with family sharing I need to get things sorted out and I think it is going to be a mess. I have 6 family members (my spouse and 4 children) all sharing/using one itunes account. For parental reasons this made perfect sense. Now with the the advent of family sharing and such we have alot of sorting and migrating to do and I am very unsure how to go about it. Here is what we have.
Myself - I have a 64GB iPad 3 and a 64GB iPhone 5
Spouse - 64GB iPhone 5
Children - x4 16GB iPhone 5C (pink, blue, green, and a yellow)
We have had one itunes account now for several years, we used to have x4 16GB iphone 4's and a 16GB iPod touch 4 so we needed it to be shared at the time. We all have different Game Center ID's and Facetime/iMessages are all setup to the phone numbers (aside from mine which also uses the itunes e-mail). We currently have 1 upgraded icloud account with 200GB of storage on it (love the new tiers). So here are the questions.
1) How do I go about using and isolating all the devices so they can all use the iCloud storage? Right now if I try and setup backups by device under the what to backup there is no simple "Full Backup" option, they have all the categories separated. I cannot backup my daughters contacts without forcing a merging of them and so on. Same thing with Documents and Data. Would I need to setup a different iCloud account for each device now?
2) iTunes Music/App purchases. Now that they have a family sharing function I am assuming it would be a good time to separate all the devices (aside from my personal iPad/iPhone). If I understand correctly we need to setup a new itunes account for each and link them with family sharing, does this then allow us to disperse/move items from a singular to the multiple account (at least a one time option to move around) or would it simply be shared off the original account? My daughter for example will be 18 next summer and as such no longer under our care. How do we move her items to her account? She has a lot of purchased Music. Now keep in mind I am talking about an account for someone who was 12 when she had her first device and as such needed to be under her parents.
I just want to state that repurchasing things is NOT an option, and to be frank, according to Canadian laws pertaining to *licensing* we actually own the product if we paid for it and have the right to transfer the ownership thereof. This issue went through the courts regarding used copies of OEM editions of Microsoft Windows several years ago and they closed the legal *license* vs ownership separation.Go to appleid.apple.com to manage the ID, sign in and select to the Name, ID and Email Addresses section, then change the birth date on the bottom right. At the present time you may not be able to enter the correct birth date, but others have had success changing the year to 2000, or the date to 1/1/2001, both of which will have child ID status.
-
AR Open/Closed Invoices Migration Help
Hello Experts,
We have a data migration requirement for AR invoices from a legacy system to Oracle.
We have both open and closed invoices. Can anyone of you help in giving the steps to be followed? This is for India AR Invoices. Expecting a quick response and it would be of great help to us! This is in 11.5.10
Thanks,
Janani Sekar
Edited by: user11981778 on 20-Dec-2012 20:32Hi,
Pl. populate the following open interfaces from your legacy data and then run the 'Autoinvoice Master Program'
(1) RA_INTERFACE_LINES_ALL
(2) ra_interface_distributions_all
For open invoices the AR_PAYMENT_SCHEDULES_ALL.STATUS sholuld be equal to 'OP' .
Pl. visit following link also for more info.
http://bhaskarreddyapps.blogspot.in/2011/10/ar-invoice-interface.html
HTH
Sanjay -
Migrate all Open Sales Orders From Legacy System (SAP) To SAP System using
Hi Experts,
I've to Migrate all Open Sales Orders From Legacy System (SAP) To SAP System using Business Objects with a new SALES ORDER DOCUMENT NUMBER referencing the older one.
I'll get all the required data with field in an excel file.
Does any standard transaction exist for it ? Or how to go ahead with it ?
Thanks and regards,
Jyoti ShankarHi
If you are checking for CREATE option then Sales Doc Type
For more Info goto SWO1 transaction -> BUS2032 --> DIsplay --> Execute --> There SELECT the method which you want to perform... There you can fine the MANDATORY parameters also....
Or in DISPLAY mode PLACE Cursor on the Required Method and CLick the PARAMETERS button on toolbar...
That will show the MANDATORY parameters...
Reward if helpful....
Message was edited by:
Enter the Dragon -
Migrating open POs and GR/IR clearing account balance
Hello gurus,
I've got the following problem concerning migration of open POs:
For example: In my source system there is a PO for 10 pcs. of some material. There has been a goods receipt for 5 pcs. (200$ each).
Now, when I import this order and the corresponding purchase order history into my target system (using LSMW), the target system creates the order, a material document for 5 pcs. and an account document.
But of course, our FI-team also has to migrate the balance of the 'old' GR/IR clearing account.
So, the balance in the source system is <> 0 (e.g. 1000$), because the 5 pcs. have been delivered but there has been no invoice receipt yet.
This balance is imported into the new system and then the open orders are migrated, generating an account document and thus, the balance is 2000$ afterwards.
This obviously is not correct, so I am sure that I am missing something, just what?
Thanks
AliciaHi,
1. There will be an open PO uploaded for 5 qty and price 200$ each
2. Opening Balance of Material - 5 qty and corresponding value to Stock A/c - 1000$
3. Also there will be Vendor Balances uploaded in the system as 1000$ against the invoice. (If the invoice is still expected then chec with FI Users if they can get invoice form vendor)
if no then do not upload initial stock entry of step2, create a PO of 10 qty and then do GR in system (SAP). -
[Migrating from 6i to 11G] HTML viewer
Hi,
There used to be a program to display the output of a report in 6i. When the report was displayed, it used page breaks (ESC characters) to allow the user to view the next page and print a range of pages from a report.
In 11G, these control characters are not interpreted by Internet Explorer:
>
height 85
width 94
before report esc "&l%%0O" esc "&l8D" esc "(s12H"
after report esc "E"
after page control(L)
[End Quote]
So how could I migrate the printer definition files in order to get after page control in 11G?
Many thanks for your help.As my old college profession used to say - "The only stupid question is the one that doesn't get asked!" Forms 11g only supports web deployment. This means you will need the OAS with the Forms and Reports Services installed as well. Typically, the setup is three tiered ( 1 server = Database, 1 server = Application Server, 1 server = Infrastructure server ). You don't have to set up the technology stack multitiered - all three could reside on the same server or you could have the all three on the same machine but is not recommended. I would at least have the database on a server seperate from OAS.
Here are a few links to get you started.
Oracle Documentation
* Check out: Development Tools - Oracle Forms, Middleware - Applications Server - Oracle Fusion Middleware 11g and Middleware - Data Warehousing and Business Intelligence - Oracle Reports
Since you will be upgrading from Forms 6i to 11g, be sure to visit the Oracle Forms-Upgrading Forms 6i to Forms 11g documentation.
BTW, welcome to the forums!
Craig
If a response is helpful or correct, please mark it accordingly.
Edited by: CraigB on May 6, 2010 2:09 PM -
How can I migrate everything from one account to another on same computer?
How can I migrate everything from one account to another on same computer?
Transferring files from one User Account to another
-
After migration, from PC, files are now shared between two user accounts.I have to switch users to access files. How can I combine them into one account?
See Pondini's Transferring files from one User Account to another, for starters
-
Duplicate user account OR migrate iPhoto/iWeb between users
I've seen this question asked several times before, but have not seen an answer!
So, with as many details as I can muster:
I have, on my computer, 4 user accounts: my admin account, my user account, my boyfriend's user account, and our business account... All separate, keeps things nice and tidy (sort of!).
I have a new and separate project that I'm starting to work on which involves lots of images, and new websites, and new and different stuff that's necessary for the project, but just clutter in any of the other accounts.
Because this project started out as something my man wanted to play around with, all of the beginnings of this are in his iPhoto and his iWeb, and they're well organized. I've not had luck so far moving the iPhoto and iWeb libraries to a new/blank user and maintaining the organization that I've spent time and attention making right.
He's not so great with technology, and gets very frustrated (and unproductive!) when anything on the computer doesn't work exactly like he expects it to. (When Lion came out and the scrolling went "the wrong direction" he was afraid to use the computer at all for a week, because "everything changed, I don't even know how to use it anymore" that's between us though, personal issure ). So I'd like to keep the user experience the same for him. I'd like to duplicate his settings, preferences, etc. into a new user for him, and take over his current account to isolate this project.
So, in summary:
I want to create a new account with the same user experience as a current account without having to find and reset all of his settings.
OR
I want an exact copy of the iPhoto and iWeb from this user account to another one, on the same machine.
I am currently running OSX 10.7.2, iPhoto '11 9.2.1 and iWeb 3.0.4
Thanks in advance for any help!Kenzishly wrote:
I want to create a new account with the same user experience as a current account without having to find and reset all of his settings.
That's easy, if you have Time Machine or "bootable clone" backups. (If you don't, you should anyway. Post back if you need info on them.)
Use Migration Assistant to transfer just that user account from the backups; it will put up a screen saying it can't transfer it under the same name as the existing account, and allowing you to rename it.
Other than having a different name, the transferred account will be identical to the existing one. Then you can modifiy them separately as necessary.
EDIT: see Using Migration Assistant on Lion for detailed instructions. Be sure to un-check the boxes for eveything except that one user account.
Message was edited by: Pondini -
I can't change the url of my old behance account so I need to start afresh with a new behance account... how can i migrate all content from the old url into the new one? thanks
If you have a login questions - please contact Behance support directly. Behance is transitioning all logins to Adobe IDs this Spring 2014. If you signed up for Behance post April 10, 2014, your Behance login matches your Adobe ID exactly. If you signed up before this and are having trouble logging in, visit this section for more help, or contact Behance support. Please do not comment on this forum with login questions, as we're able to provide much faster, one-on-one support elsewhere.
-
After migrating data from Time Machine, some of my photos are not showing up in iPhoto LIbrary view. I get a 'dashed rectangle." When I click on it I get ' ! in a Triangle" When I click on that, I actually can see the photo. I want to see all my photos in 'Library' view, and I can't figure out how these photos seem to be arbitrarily hidden. Help, please.
Try these for the first attempt:
First be sure to have a backup copy of the library if you already don't have one.
OT -
How do I find a photo file in the Finder + future migration question
Being a recent Mac convert, I am just getting used to the 'complete control' approach to photo management that iPhoto has. I'm used to knowing where my photos physically reside on my computer - this is useful for doing things like uploading photos to a website for example. How do I actually find a particular photo in the Finder (or even give photo files recognisable names, as opposed to whatever automated naming system iPhoto uses)?
A followup question to this is, what happens if I ever want to migrate my photos out of iPhoto one day to another application or even back to a PC (God forbid - just my paranoia about being forced to use a particular system forever kicking in here!) - is there a way to do this, and keep photo modifications etc? Or once I start using iPhoto, have I made my decision for life??
My apologies if this has been asked before, I couldn't find anything in the forum when searching.poddster
I hope you've a notebook and pen, but you've asked a lot of questions:
I'm used to knowing where my photos physically reside on my computer
You photos are stored in the iPhoto Library at your Pictures Folder. This is a Unix style Package Folder that very easy to see inside: right click on it and choose show package contents. A finder window opens with the library exposed.
Here's how the library is laid out:
In this folder there are various files, which are the Library itself and some ancillary files. Then you have three folders
Originals are the photos as they were downloaded from your camera or scanner.
(ii) Modified contains edited pics, shots that you have cropped, rotated or changed in any way.
iPhoto always preserves the original file, all operations are carried out on a copy.
(iii) Data holds the thumbnails the the app needs to show you the photos in the iPhoto Window.
And here's a warning: It is strongly advised that you do not move, change or in anyway alter things in the iPhoto Library Folder as this can cause the application to fail and even lead to data loss.
this is useful for doing things like uploading photos to a website for example
No it's not. Don't surf the iPhoto Library. The idea with iPhoto is that you do everything via the iPhoto Window or media browsers:
So, to access pics use one (or more) of the following:
There are three ways (at least) to get files from the iPhoto Window.
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
To upload to MySpace or any site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. If you're using Gmail you can use THIS
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser. Or, if you want to access the files with iPhoto not running, then create a Media Browser using Automator (takes about 10 seconds) or use THIS
iPhot doesn't name the files, those names are given by your camera. You can add titles in iPhoto and if you use the File -> Export command there's a facility there to name the resulting file (it'll be a copy - remember what I said about all operation being done on a copy...) with the title.
Do not rename files in iPhoto, That comes under the heading of making changes in the iPhoto Library Folder and alters the path to the files. If you do, iPhoto will lose track of the file. But the truth is there's simply no need to. However, you can rename the files before importing them if you like.
Migrating is really easy. You've seen the layout of the Library above. The originals are all there, in the originals folder, the Modified versions in their folder. If you want to have only the most recent versions of pics, then export them from iPhoto to a folder on the desktop.
By all means post back if you need more.
Regards
TD -
The user profile in my old computer somehow became corrupted and I can no longer access it to log on. Unfortunately I was not aware of the Firefox sync feature at the time. I used a new profile and had to start from scratch to save new bookmarks and extensions/plugins. I did set up Firefox sync for this new profile. Now I have a brand new computer and desire to migrate the bookmarks to this new computer, including the original bookmarks in the old computer, as well as the bookmarks in the second profile. While I have located the profiles folder for each profile in my old computer (as well as extensions and plugin folders), the content of this folder is daunting. I would like to know which are the minimal folders I should select to migrate and would it be safe to simply copy and paste over the entire folder? Please note that I have also added new bookmarks into my new computer which I would not like erased. I hope these details are not convoluted.
Firefox has two methods of bringing in bookmarks from another Firefox profile:
* Restore a backup (JSON files in the bookmarkbackups folder): this completely replaces what you have, so is not the first step
* Import from an HTML file: this is additive and will create an Imported Bookmarks folder or add them under Unsorted Bookmarks
Restore is best if you tag your bookmarks because the JSON format preserves tags. If tags are not important, then it's easier.
What I suggest is:
(1) Export your current bookmarks to the HTML format; you can reimport these later. See: [[Export Firefox bookmarks to an HTML file to back up or transfer bookmarks]]. Open the file in Firefox (it's a web page) to make sure it looks complete before proceed.
Next, get the bookmarkbackups folders from each of your old profiles that you want to restore, and look for the most-complete-looking JSON files (they will have the most recent dates and largest number of bookmarks indicated in the file name). Proceed from the smallest set to the largest, or oldest to newest; basically, restore the most important one last.
(2) Restore a backup, then export to HTML. This article has the steps for a restore: [[Restore bookmarks from backup or move them to another computer]]. Then export to HTML and check for completeness.
(3) Repeat #2 until you get to the last/most important restore. You don't need to export that one.
(4) Import the HTML files you've made throughout the process.
(5) In the Library dialog, reorganize. Firefox doesn't have a deduplicator, but you might find one or more extensions to do the job on the Add-ons site if you find a lot of overlap.
Make sense? -
Error while migrating users using CSSImportExportUtility
Error while migrating users using CSSImportExportUtility
I'm tring to export all user and group information from a Hyperion Shared Services 9.2.1 by using CSSExport.bat
When there was only native directory in HSS, i can export these information successfully.
But when I enabled NTLM external user authentication following error occurred:
Exception in thread "main" java.lang.UnsatisfiedLinkError: getOSVersion
at com.hyperion.css.spi.impl.ntlm.NTLMProvider.getOSVersion(Native Metho
d)
at com.hyperion.css.spi.impl.ntlm.NTLMProvider.<clinit>(Unknown Source)
at com.hyperion.css.spi.impl.ntlm.NTLMConnectionClient.getUsers(Unknown
Source)
at com.hyperion.css.CSSAPIExtnImpl.getUsers(Unknown Source)
at com.hyperion.css.CSSAPIImpl.getUsers(Unknown Source)
at com.hyperion.css.CSSAPIImpl.initialize(Unknown Source)
at com.hyperion.css.exchange.NativeProviderManager.<init>(Unknown Source
at com.hyperion.css.exchange.ImportExportManager.cssExport(Unknown Sourc
e)
at com.hyperion.css.exchange.CommandUtility.run(Unknown Source)
at com.hyperion.css.exchange.CommandUtility.main(Unknown Source)
I searched reference documents on the web, found this article: (http://download.oracle.com/docs/cd/E12825_01/epm.111/readme/mdm_111110_readme.html)
Troubleshooting Tip: If HSS is configured for an NTLM provider, DRM services may not start due to error: "Exception Emdm_Exception with message 'Could not Initialize CSS. Error: 'getOSVersion'."
You may receive the following error after clicking the "Enable CSS" button in DRM Console: “LoadLibrary("C:\Hyperion\Master Data Management\mdm_ntier_css_validator.dll") failed - The specified module could not be found.”
To resolve both of these conditions, update the Windows System Path on the Data Relationship Management server with the applicable JRE and CSS pathing below.
NOTE: Reboot the Data Relationship Management server machine after making any changes to the Windows Path.
NOTE: Ensure that only one JRE version and one CSS version are referenced in the Windows Path.
? For HSS 9.3.1:
%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin;%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin\client;%HYPERION_HOME%\common\CSS\9.3.1\bin;
? For HSS 9.3.0:
%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin;%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin\client;%HYPERION_HOME%\common\CSS\9.3.0\bin;
? For HSS 9.2.0.3:
%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin;%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin\client;%HYPERION_HOME%\common\CSS\9.2.0.3\bin;
? For HSS 9.2.0:
%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin;%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin\client;%HYPERION_HOME%\common\CSS\9.2.0\bin;
I found these is no directory "%HYPERION_HOME%\common\CSS\9.2.0\bin;" exists but "%HYPERION_HOME%\common\CSS\9.2.1\bin;"
I configured PATH by setting to above, and tried CSSExport again, still failed.
Than I disabled the NTLM is HSS, tried CSSExport again. It was successful.
So I am convinced that the problem caused by NTLM or PATH environment variable or some files associated.
Does anybody know the solution ?I recommend you upgrade at least to 10.1.0.5. 10.1.0.2 comes with the very first version of csalter.plb, which has not the current implementation. From and to which character set do you try to migrate?
-- Sergiusz
Maybe you are looking for
-
Hello everybody, we poll via file adapter. The files we read are processed in BPM. Is it possible to access the value of a file name in BPM? Regards Mario
-
How to use Spring MVC instead of assembler.jsp in endeca 3.1.0
Hi , I am new to Endeca . I want to use spring MVC instead of assembler.jsp .Some body please help me how can i do it. Wht all i have to do to achieve it. Thanks Mark
-
How do I 'close application elementsautoanalyser when installing PE 11?
When I try to install Adobe Application Manager I get the message 'Please close the following applications to continue. ElementsAutoAnalyzer.exe' How do I do this, I can't find this file on my PC?
-
What is the purpose of BAPI_SALESORDER_SIMULATE
Hi Experts, can u please call me what is the purpose of BAPI_SALESORDER_SIMULATE. Thanks in Advance
-
What is the point? (combo vs. superdrive)
I initially wanted to buy the 2.0GHz white macbook, but now it looks like I'll only be able to afford the 1.83GHz mb. My question is: what is even the point of having a laptop (or any computer) in this day and age that isn't able to burn DVDs? The co