Migrating to CTS+

Hi Team,
Please consider this scenario.
1. System DE1 has SLD, DEV and NWDI and runs CMS.
2. DE* Landscape is moving to CTS+, but cannot utilize DE1 due to SLD,DEV, NWDI being on the same system (recomended No No)
3. So the responsibility of NWDI and CM Services has been given to another NWDI - TEW (SLD on TED).
Migration Approach (Application "POC" with history (DTR Migration)??
i think we can do this. let me know if its the proper thing
1. Migrate CMS from DE1 to CMS on TEW -> Switch to CM Services -> Configure CTS+
or
2. Migrate directly to CM Services on TEW which would already have CTS+.
Regards,
VB

Hi Everyone!
We have our CTS System visible in CM Services.
We are following How To... Switch to CM Services & How To... Configure CM Services in SAP NetWeaver 7.3 and up
We have our CTS System visible in CM Services.
We started the synchronization services with the dependent components and the Application Software components that needs to be migrated here.
The CBS and DTR are build and created, but no DCs are visible.
I am bit confused about what was left.
Regards,
Varun Biswas

Similar Messages

Transport of ALE Interfaces for Function Module

hi,
i have a Z function module, Z business object type and z message type identifying ALE interface.
i need to move all the objects from Dev R3 to QA R3. What are the steps involved?
Thanks,
Tirumal

Hi
While creating a Z function module it will ask you for a change request number. attach it to change request and migrate it to Production.
In case your function group to which you assigned this function module is open then the CTS number will by default come in CTS number field if any exists for the function group. You can now migrate your CTS to production.
Now after assinging function module to a CTS you can be sure that your program for function module and FM both will be migrated. For confirmation you can now check attribuutes section in your function module. it will list the SAP program associated with Func mod , function group to which function module is assigned , package and include programs which needs to be migrated. So you only need to attach a CTS and migrate your CTS.
You can create a Change erquest (CTS) in SE01 or SE10 transactions.
Regards,
Amit.
Please reward any help
Message was edited by: amit bhadauria
Message was edited by: amit bhadauria

How to Migrate the open transports in CTS+

Hi Experts
We are planning to implement CTS+ in our organisation, after implementing the CTS+ it's possible to migrate the open transports in CTS+
Thanks & Regards
Venkat

Hi venkat,
what i understand is you are already having some TR on which work is gng on and now you want to add.
no problem
in your CTS+ when you create a TR just merge the old TR into this
or
you can also you the Copy objects
in SE09
this is very common technique use by developers so just ask them to check in se09.
how it ans ur query
Regards
Prakhar

RE:Migration of KM content

Hi Experts
I want to migrate KM content from development to production server (EP7).Will the metadata propeties get migrated if i use ICE protocol.I also need to migrate the properties related to search. Will i be able to achieve this through ICE protocol or should i use CTS transport to migrate configuration properties.
Please suggest me to proceed further.
Regards
Chandana

Hi chandana,
no matter which way you use for the transport, you need to first migrate the[ KM properties configuration|http://help.sap.com/saphelp_nw70/helpdata/en/e1/029c414c79b25fe10000000a1550b0/frameset.htm] and afterwards the KM content. You can make use of a Change and Transport System (CTS) if you have one, but that's not required.
After you have successfully transported the configuration, you can use WebDAV or ICE to transport content, if you only care about your custom properties relevant for search, but the new tool provided with NW7.0 SPS14 is the more advanced. It allows you to filter documents and also to transport the GUID. The link to the documentation is provided by Steve above, and just to make sure, it works also for folders and not only for single documents.
Hope this helps,
Robert

MDM 7.1 Transport Management using CTS+

CE: 7.2
MDM: 7.1
PI: 7.1 EHP1
ERP: 6 EHP4
Hi,
For central master data management, we are building a solution based on the components mentioned above. Our current landscape for ERP has 10 systems due to the requirements of the project. This includes SBX -> DEV -> QAS -> INT -> UAT -> PRE-PROD for project. Then we have SBX -> DEV -> QAS -> PROD for business as usual. The idea is that we the first phase goes live, BaU will be used to support the live environment while project environments can continue to be used for new functionality development in various phases over several years.
We plan to use CTS+ to manage the transports in the landscape. However, the question is whether we need 10 MDM system to match ERP, or could we use less systems without impacting the overall quality and effort of delivery?
Also keep in view that CE will be used to run the custom BPM workflows. Moreover, we'll deploy MDM web services on CE server to be consumed by Web Dynpro JAVA UI components. All in all, the overall solution will span several development components across ERP (custom enterprise services), PI (custom integration content), CE (custom WD JAVA UI, MDM web services, workflow), and MDM (tables, fields, relationships, roles, XML schemas, etc).
Given that MDM repositories are self-contained, and we can create more than one repositories on QAS e.g. for INT and UAT, I am trying to identify any potential pitfalls/technical implications of using less MDM environments for more ERP systems.
Lets say we had 3 repos on QAS MDM server: REP_Q, REP_I, and REP_U. If we wanted to test certain functionality in REP_I, we could transport it from REP_Q to REP_I hosted in the same MDM system. Similarly, these changes could be propagated to REP_U environment for further testing.
So the user can initiate a process on CE server which could call web services to create data in REP_I. Once successful, changes can be transported to REP_U and the user can use CE to call web services for REP_U for data management.
Do you have a similar landscape? Have you tried using less MDM systems to host multiple repositories without overcomplicating change management? Thoughts???
Thanks for your time.
Regards,
Shehryar

Hello Shehryar Khan
We are using 3 level environment DEV-QA-PROD.The same situation with ERP for ABAP development.
DEV and QA working on different physical servers but in the same LDAP.
PROD - has own physical server and own LDAP.
For migrated data tests we duplicate repository from PROD to DEV and named it - MIGRATED.
Business logic we are realize on DEV. If business logic and migrated data tests(on MIGRATED repo) have been finished succesfully We migrate data from MIGRATED repo to DEV and doing complex tests(business logic + new data).
The same steps we are doing on QA and then on PROD.
Regards
Kanstantsin Chernichenka

Settings are not migrated in 1.2.1.32.13

I've been trying to migrate the settings from 1.2.1.3200 to 1.1.2.32.13 but not all of them are migrating.
connections are not migrating, although SQL Formatter and preferences are. H`ave anyone experienced anything like this??
Export/Import did work.
Windows XP SP2
SQL Developer 1.2.1.3200 to 1.2.1.32.13
Tony

Barry,
The problem seems to be between 3200 and 3213, I have migrated settings from 2998 to 3213 successfully.
i have tested migration between these versions here are the results and some stack information. hope will help.
From 2998 to 3200 Successful
WARNING: Unknown directive: SetSkipJ2SDKCheck
Using oracle.home=C:\sqldeveloper_3200
Using ide.user.dir=null
WARNING: version.properties contains an invalid VERSION property (i.e. it is not
a float)
java.lang.NumberFormatException: multiple points
        at sun.misc.FloatingDecimal.readJavaFormatString(FloatingDecimal.java:10
84)
        at java.lang.Float.parseFloat(Float.java:394)
        at oracle.ide.Version.<clinit>(Version.java:57)
        at oracle.ide.IdeCore.$init$(IdeCore.java:154)
        at oracle.ide.IdeCore.<init>(IdeCore.java:162)
        at oracle.ideimpl.DefaultIdeCore.<init>(DefaultIdeCore.java:64)
        at oracle.ideimpl.DefaultIdeCore.<init>(DefaultIdeCore.java:69)
        at oracle.ideimpl.Main.start(Main.java:89)
        at oracle.ideimpl.Main.main(Main.java:51)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at oracle.ide.boot.PCLMain.callMain(PCLMain.java:45)
        at oracle.ide.boot.PCLMain.main(PCLMain.java:37)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at oracle.classloader.util.MainClass.invoke(MainClass.java:89)
        at oracle.ide.boot.IdeLauncher.bootClassLoadersAndMain(IdeLauncher.java:
218)
        at oracle.ide.boot.IdeLauncher.launchImpl(IdeLauncher.java:90)
        at oracle.ide.boot.IdeLauncher.launch(IdeLauncher.java:66)
        at oracle.ide.boot.IdeLauncher.main(IdeLauncher.java:55)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at oracle.ide.boot.Launcher.invokeMain(Launcher.java:508)
        at oracle.ide.boot.Launcher.launchImpl(Launcher.java:106)
        at oracle.ide.boot.Launcher.launch(Launcher.java:60)
        at oracle.ide.boot.Launcher.main(Launcher.java:49)
java.lang.IllegalStateException: GlobalSettings already exists, cannot initialis
e twice.
        at oracle.javatools.db.GlobalSettings.initialiseInstance(GlobalSettings.
java:45)
        at oracle.ideimpl.db.DatabaseIdeAddin.initialize(DatabaseIdeAddin.java:6
4)
        at oracle.ideimpl.extension.AddinManagerImpl.initializeAddin(AddinManage
rImpl.java:433)
        at oracle.ideimpl.extension.AddinManagerImpl.initializeAddins(AddinManag
erImpl.java:244)
        at oracle.ideimpl.extension.AddinManagerImpl.initProductAndUserAddins(Ad
dinManagerImpl.java:157)
        at oracle.ide.IdeCore.initProductAndUserAddins(IdeCore.java:1517)
        at oracle.ide.IdeCore.startupImpl(IdeCore.java:1280)
        at oracle.ide.Ide.startup(Ide.java:642)
        at oracle.ideimpl.DefaultIdeStarter.startIde(DefaultIdeStarter.java:35)
        at oracle.ideimpl.Main.start(Main.java:90)
        at oracle.ideimpl.Main.main(Main.java:51)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at oracle.ide.boot.PCLMain.callMain(PCLMain.java:45)
        at oracle.ide.boot.PCLMain.main(PCLMain.java:37)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at oracle.classloader.util.MainClass.invoke(MainClass.java:89)
        at oracle.ide.boot.IdeLauncher.bootClassLoadersAndMain(IdeLauncher.java:
218)
        at oracle.ide.boot.IdeLauncher.launchImpl(IdeLauncher.java:90)
        at oracle.ide.boot.IdeLauncher.launch(IdeLauncher.java:66)
        at oracle.ide.boot.IdeLauncher.main(IdeLauncher.java:55)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at oracle.ide.boot.Launcher.invokeMain(Launcher.java:508)
        at oracle.ide.boot.Launcher.launchImpl(Launcher.java:106)
        at oracle.ide.boot.Launcher.launch(Launcher.java:60)
        at oracle.ide.boot.Launcher.main(Launcher.java:49)
Addin: Translator PlSql is trying to register a input type (.plsql) which confli
cts with translator PlSql who already using this input type
From 3200 to 3213 Un-Successful
WARNING: Unknown directive: SetSkipJ2SDKCheck
Using oracle.home=C:\sqldeveloper_3213
Using ide.user.dir=null
Addin: Translator PlSql is trying to register a input type (.plsql) which confli
cts with translator PlSql who already using this input type
reloadBuffers(): 49 nodes checked in 6.07898E-4 second(s)
reloadBuffers(): 49 nodes checked in 4.14857E-4 second(s)
From 2998 to 3213 Successful
WARNING: Unknown directive: SetSkipJ2SDKCheck
Using oracle.home=C:\sqldeveloper_3213
Using ide.user.dir=null
java.lang.IllegalStateException: GlobalSettings already exists, cannot initialis
e twice.
        at oracle.javatools.db.GlobalSettings.initialiseInstance(GlobalSettings.
java:45)
        at oracle.ideimpl.db.DatabaseIdeAddin.initialize(DatabaseIdeAddin.java:6
4)
        at oracle.ideimpl.extension.AddinManagerImpl.initializeAddin(AddinManage
rImpl.java:433)
        at oracle.ideimpl.extension.AddinManagerImpl.initializeAddins(AddinManag
erImpl.java:244)
        at oracle.ideimpl.extension.AddinManagerImpl.initProductAndUserAddins(Ad
dinManagerImpl.java:157)
        at oracle.ide.IdeCore.initProductAndUserAddins(IdeCore.java:1517)
        at oracle.ide.IdeCore.startupImpl(IdeCore.java:1280)
        at oracle.ide.Ide.startup(Ide.java:642)
        at oracle.ideimpl.DefaultIdeStarter.startIde(DefaultIdeStarter.java:35)
        at oracle.ideimpl.Main.start(Main.java:90)
        at oracle.ideimpl.Main.main(Main.java:51)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at oracle.ide.boot.PCLMain.callMain(PCLMain.java:45)
        at oracle.ide.boot.PCLMain.main(PCLMain.java:37)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at oracle.classloader.util.MainClass.invoke(MainClass.java:89)
        at oracle.ide.boot.IdeLauncher.bootClassLoadersAndMain(IdeLauncher.java:
218)
        at oracle.ide.boot.IdeLauncher.launchImpl(IdeLauncher.java:90)
        at oracle.ide.boot.IdeLauncher.launch(IdeLauncher.java:66)
        at oracle.ide.boot.IdeLauncher.main(IdeLauncher.java:55)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at oracle.ide.boot.Launcher.invokeMain(Launcher.java:508)
        at oracle.ide.boot.Launcher.launchImpl(Launcher.java:106)
        at oracle.ide.boot.Launcher.launch(Launcher.java:60)
        at oracle.ide.boot.Launcher.main(Launcher.java:49)
Addin: Translator PlSql is trying to register a input type (.plsql) which confli
cts with translator PlSql who already using this input type

Do BPC Hierarchies (i.e. ParentH2) have to be migrated?

We are using BPC 7.5 SP6. We migrate changes (via CTS, customizing requests) from Development to QA to Production via the standard transaction UJBPCTR (or call the program UJT_CRT_BPC_TR via SE38).
If I create a new hierarchy in one of my dimensions (i.e. create a ParentH2), does this have to be migrated or do we just do it manually in each ADMIN client (i.e. DEV, QA, PROD)? I know that it is not a dimension property (and we migrate dimension propery/attributes) but I don't know for sure if Hierarchy adds are different.
Thanks in advance,
Vicki

Hi Eu,
I don't know if there is something 'special' about the very first migration or not but from what I have learned, the ParentHx hierarchies are not migrated. I agree with the comment that the ParentHx hierarchies are 'master data' and are updated in each client individually. I was only learning BPC when we did our first migration from DEV to QA. As soon as we did that migration we then loaded the dimensions in QA. I normally just take a copy of the entire dimension and paste it in. I never stopped to look at the dimension properties after the migration but before I loaded the dimension in QA.
I think you are completely fine. It is just a matter of loading your QA dimension with whatever hierarchies you want going forward. It seems to be fine to even have different hierarchies between clients (i.e. say just ParentH1 in DEV but ParentH1 and ParentH2 in QA) although I personally never do that. I'm a big proponent of keeping things consistent with the exception of when you are devoping a new design where your earlier clients might be different than QA and production as you work through your testing.
Vicki

Impact of Migrating the Multiple maintenan Project to Single project

Hi,
I would like to know more details on the Impact of migrating/consolidating Multiple Maintenance Project to Single Solution Magager Maintenance Project.
For exapmple: I have 4 Maintenance Projects with different logical systems running with CHARM functionality, but instead of maintaining these multiple Maintenance project, I can have one Maintenance project and muntiple IMG projects associated with it. If I do so what is the impact to the current CHARM functionality. Based on the IMG projects the CTS projects will be created and CHARM should work fine. But I need a clarity if someone have already the same kind of setup.
Also what is the scope of creating and maintaining the Maintenance projects to a Solution. Please Provide an Impact Analysis.
Appreciate a quick response.
Thanks
Shashi

Make a Buffered Image large enough to handle the size of the final image... say you have 10 jpegs each 100x100, and you want them in a configuration with 5x2... 500x200.
Once you have the images loaded and the new BufferedImage, just paint them into the appropriate (x, y) value of the graphics context of the image.
g.drawImage(image1, 0, 0, null);
g.drawImage(image2, 100, 0, null);
g.drawImage(image3, 300, 0, null);
.

Charm Issue - Won't Migrate to Prod

Hi
We are testing ChaRM in our DEVELOPMENT Solution Manager.
We are testing ZMHF and pushing a transport from DEV > QAS > PROD.
The transport was successfully release and imported to QAS successfully. However, the import to PROD did not work.
There is two possible reasons why:
1) Our DEV and QAS systems are on EHP5. Our PROD system is on EHP7. Please note, these are ALL test systems!!!!!! There is no way in the world we would have this setup in our real environments Our real environment is all EHP7 haha. Given this is purely for testing, we thought we would just test with three available dummy systems...two which happened to be EHP5 and one which was EHP7.
Anyway, in the Import Queue for Production it states "Does not match component version". I'm assuming this is why the ZMHF does not import. I have also tried importing via the Task List (and have clicked the option to IGNORE INVALID COMPONENT VERSIONS)....this still didn't import.
My first question is should the Maintenance Cycle Task List import Urgent Corrections (ZMHF) as well? I believe it should?
I then tried importing via STMS into PROD (and checked the IGNORE INVALID COMPONENT VERSIONS) and it worked. I was then able to close the ZMHF in ChaRM.
Did it not import from ZMHF Directly and Maintenance Taks List because of the INVALID component versions?
OR
2) I noticed in the Alert Monitor for our PROD system the following:
Plug-in SAP_CTS_SERVICE is not registered in bootstrapper.
Also in the task list for the import I noticed the following:
What exactly is SAP_CTS_SERVICE Plugin or cCTS plugin??? Is this needed for ChaRM? Or is this warning something I can ignore? If it's 100% required, which systems does it need to be installed in?
Also, is this the reason why it didn't migrate to Prod?
Thanks so much!!!!!!!!
Shaun

All sorted.
Installed the CTS plugin and the warning disappears...although this wasn't the issue.
The test system we had setup had the wrong transport domain in SMSY.
All good now.
Cheers

CMS and CTS+

Hi all,
I want to know the difference between CTS+ and CMS. Is there any additional advantage provided by CTS+ over CMS? Also what is the difference in the procedure to transport IR and ID objects in CMS and CTS+.
Any links to documents related to transporting IR , ID objects via CMS and CTS+ will be very helpful.
Regards,
Santosh

Hi,
What is CTS+ and why is is introduced:
The Change and Transport System (CTS) is a tool that helps you to organize development projects in the ABAP Workbench and in Customizing, and then transport the changes between the SAP Systems in your system landscape.
The XI use case for CTS+ introduces a new transport handling mechanism that offers tighter integration for the transport of ABAP, Java, and Integration Builder objects (Integration Repository and Integration Directory) using the Change and Transport System (BC-CTS) functionality.
As your XI system requires both the ABAP and the Java stack of the SAP NetWeaver Application Server, the following transport tools are available after installation:
u2022
The ABAP transport environment (BC-CTS)
u2022
The file export and import mechanisms or CMS integration to transport Repository or Directory objects in your transport landscape
In addition, you might also have to transport Java development objects by using the SAP NetWeaver Development Infrastructure itself.
The enhancements to CTS in combination with the SAP Solution Manager Change Request Management (ChaRM) address the following issues:
u2022
Synchronized transports for mixed systems (ABAP & Java)
u2022
A unified application for mixed system landscapes
u2022
Tracking of non-ABAP transports including Change Request Management
For your XI landscapes there will be one central transport environment with CTS+ where you can manage all XI-relevant transport objects from a single entry point.
This how-to guide describes the configuration settings you must make in the CTS+ system and XI systems. The functionality must be set up according to the release version of the integrated XI system. The two configurations will be described separately:
u2022
Configuration setup for releases prior to SAP NetWeaver 7.0 SPS12 (also for SAP NetWeaver 2004 SPS14 and higher).
u2022
Configuration setup for release SAP NetWeaver 7.0 SPS12 and higher.
Refer the link for CTS+ step by step method of transport:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80bbbd55-5004-2a10-f181-8bb096923cb6
http://help.sap.com/saphelp_nw04/helpdata/en/03/dcb6b6048711d3b42a00609419f767/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90d3b550-b6fb-2910-0fa5-ece5d61fb9c3
CMS is generally used to transport Java development objects. The XI Integration Server uses CMS to transport Integration Server content. When the Integration Server uses CMS to transport XI Content, no Component Build Service (CBS) or Design Time Repository (DTR) is used and can therefore be switched off. If you want to transport Integration Server content and Java developments (Java proxies or adapter modules), the CBS and DTR must be running.
If you transport Java developments, you should keep in mind that deployment of Java code can destabilize the runtime environment. Therefore, it is beneficial to install CMS on a separate server, as described in SAP Note 737368 for NWDI.
In this How-to Guide, CMS is installed together with an Integration Server system in the development environment. The advantage of this approach is that you have fewer steps in user management and CMS cannot influence the runtime of a productive environment.
With the enhancements of the SAP NetWeaver Change and Transport System (CTS for short, or CTS+ respectively, if specifically the enhanced capabilities are meant), available with SPS12 of SAP NetWeaver 7.0, the CTS has been enhanced to handle any type of object that can be transported in an SAP system landscape. Therefore, an administrator of your ABAP system can now also manage the transports for the non-ABAP parts of your system landscape.
You can now use CTS to transport (almost) arbitrary objects in an SAP system landscape with transport orders of the Transport Organizer:
u2022
Enterprise Portal archives (EPAs)
u2022
Exchange Infrastructure objects (TPZs)
u2022
Software component archives (SCAs)
u2022
Software delivery archives (SDAs)
u2022
Enterprise Application Archives (EARs)
u2022
ABAP objects
Development objects will be deployed according to their application type. Objects in a single transport order can be a mixture of all types u2013 however that only makes sense, if both are intended for the same system because transport paths are defined in the transport domain controller system.
CTS+ and usage type PI (SAP NetWeaver Exchange Infrastructure, XI)
o
If you are not using the Change Management Service CMS of the NWDI, you should seriously consider using CTS+ for your XI transports (CTS+ & SAP NetWeaver usage type PI).
o
If you are already using the CMS, you should postpone any planned migration to use CTS+ up to availability of SAP NetWeaver 7.0 SPS 13 , where integration will be enhanced futher.
o
In any case you should evaluate the enhanced CTS options of SAP NetWeaver 7.0 comming with SPS 12 and extensions planned with SPS 13/14 for XI transports u2013 in the mid and long term CTS+ is the best practice recommended by SAP for XI tranports.
CMS for SAP Exchange Infrastructure
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
Configuration of CMS in Central NWDI & SLD to transport XI objects
Configuration of CMS in Central NWDI & SLD to transport XI objects
How to Use CMS in XI 3.0.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
CMS based transport in XI
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
Regards,
Phani

CM Services Migration

Hi Team,
We are migration one of the applications to a CM Services CTS System environment.
We are facing issues while importing the Application component via sync services.
We have been able to import dependencies.
We are choosing "Import overwriting modification and have selected the last assembled SCA of the Application Components.
Please find the Sync Log and the CBS log attached.
Regards,
Varun Biswas

Hi,
WARNING: RunAsUser for MSP ignored, check group ids (egid=501, want=51)can not chdir(/var/spool/clientmqueue/): Permission denied
Program mode requires special privileges, e.g., root or TrustedUser.>
looks like there is some file access permission issue please give full permission on the directory /var/spool/clientmqueue/ with below command but please note down the previous permissions.this should be done on node where the concurrent manager resides
take the backup of var directory before executing below command
#chmod -R 777 /var/spool/clientmqueue
Regards
Edited by: Ahmed@hungry_dba on Feb 17, 2010 7:19 PM

Configuration of CTS

Dear all,
Could you explain to me why we must configure CTS in client 000 ? Through SAP documents, they say that we must do it by user DDIC, in client 000. But I also do it in another client, and it's OK. Is there any differences between them ?
Thank you very much.
Best regards,
Sylvecat.

Processing After Installation of the CTS
If you have installed your SAP System as a copy of an existing SAP System then you must configure the CTS after installation.
In SAP Systems installed with R3setup from the SAP CD the basic settings for the CTS are generated during the configuration of the Transport Management System. You do not need to perform any processing after installation.
Transaction SE06 provides the following functions for processing after installation:
Generating basic settings of the Change and Transport System
Setting the system change option
Closing foreign requests and tasks
You must specify the installation type of the SAP System on the initial screen:
Standard installation
The SAP System was installed from the SAP CD using R3setup. It is assumed that the SAP System is running as a correct, delivered version. No adjustments based on corrections or repairs have been made.
If you set up an SAP System that originated from a database copy using this option, problems could arise when you upgrade the system or modify objects with the Transport Organizer.
Database copy or database migration
The SAP System was created on the basis of a copy. R3setup provides utilities to do this. The SAP System needs to be assigned a new and independent role within the SAP system group or outside of it.
Before you connect the new SAP System to the SAP system group, you have to give it a name that has not yet been used in the group.
Do not use an existing system name since this could cause serious conflicts and may lead to the loss of data.

How can I Migrate/Split itunes/icloud account for a large family now that they have family sharing

Ok, now that Apple has finally come out with family sharing I need to get things sorted out and I think it is going to be a mess. I have 6 family members (my spouse and 4 children) all sharing/using one itunes account. For parental reasons this made perfect sense. Now with the the advent of family sharing and such we have alot of sorting and migrating to do and I am very unsure how to go about it. Here is what we have.
Myself - I have a 64GB iPad 3 and a 64GB iPhone 5
Spouse - 64GB iPhone 5
Children - x4 16GB iPhone 5C (pink, blue, green, and a yellow)
We have had one itunes account now for several years, we used to have x4 16GB iphone 4's and a 16GB iPod touch 4 so we needed it to be shared at the time. We all have different Game Center ID's and Facetime/iMessages are all setup to the phone numbers (aside from mine which also uses the itunes e-mail). We currently have 1 upgraded icloud account with 200GB of storage on it (love the new tiers). So here are the questions.
1) How do I go about using and isolating all the devices so they can all use the iCloud storage? Right now if I try and setup backups by device under the what to backup there is no simple "Full Backup" option, they have all the categories separated. I cannot backup my daughters contacts without forcing a merging of them and so on. Same thing with Documents and Data. Would I need to setup a different iCloud account for each device now?
2) iTunes Music/App purchases. Now that they have a family sharing function I am assuming it would be a good time to separate all the devices (aside from my personal iPad/iPhone). If I understand correctly we need to setup a new itunes account for each and link them with family sharing, does this then allow us to disperse/move items from a singular to the multiple account (at least a one time option to move around) or would it simply be shared off the original account? My daughter for example will be 18 next summer and as such no longer under our care. How do we move her items to her account? She has a lot of purchased Music. Now keep in mind I am talking about an account for someone who was 12 when she had her first device and as such needed to be under her parents.
I just want to state that repurchasing things is NOT an option, and to be frank, according to Canadian laws pertaining to *licensing* we actually own the product if we paid for it and have the right to transfer the ownership thereof. This issue went through the courts regarding used copies of OEM editions of Microsoft Windows several years ago and they closed the legal *license* vs ownership separation.

Go to appleid.apple.com to manage the ID, sign in and select to the Name, ID and Email Addresses section, then change the birth date on the bottom right. At the present time you may not be able to enter the correct birth date, but others have had success changing the year to 2000, or the date to 1/1/2001, both of which will have child ID status.

AR Open/Closed Invoices Migration Help

Hello Experts,
We have a data migration requirement for AR invoices from a legacy system to Oracle.
We have both open and closed invoices. Can anyone of you help in giving the steps to be followed? This is for India AR Invoices. Expecting a quick response and it would be of great help to us! This is in 11.5.10
Thanks,
Janani Sekar
Edited by: user11981778 on 20-Dec-2012 20:32

Hi,
Pl. populate the following open interfaces from your legacy data and then run the 'Autoinvoice Master Program'
(1) RA_INTERFACE_LINES_ALL
(2) ra_interface_distributions_all
For open invoices the AR_PAYMENT_SCHEDULES_ALL.STATUS sholuld be equal to 'OP' .
Pl. visit following link also for more info.
http://bhaskarreddyapps.blogspot.in/2011/10/ar-invoice-interface.html
HTH
Sanjay

Migrate all Open Sales Orders From Legacy System (SAP) To SAP System using

Hi Experts,
             I've to Migrate all Open Sales Orders From Legacy System (SAP) To SAP System using Business Objects with a new SALES ORDER DOCUMENT NUMBER referencing the older one.
           I'll get all the required data with field in an excel file.
             Does any standard transaction exist for it ? Or how to go ahead with it ?
Thanks and regards,
Jyoti Shankar

Hi
If you are checking for CREATE option then Sales Doc Type
For more Info goto SWO1 transaction -> BUS2032 --> DIsplay --> Execute --> There SELECT the method which you want to perform... There you can fine the MANDATORY parameters also....
Or in DISPLAY mode PLACE Cursor on the Required Method and CLick the PARAMETERS button on toolbar...
That will show the MANDATORY parameters...
Reward if helpful....
Message was edited by:
        Enter the Dragon

Migrating to CTS+

Similar Messages

Maybe you are looking for