Migrating to WRT310N from WRT54G

I am keen to install my WRT310N purchased recently. At the same time, I am a little anxious that the migration happens smoothly. My WRT54G is working well, and I'd realy like to avoid hiccups in the migration. Wanted to know if the installation of the 310N will happen smoothly, with all the current settings in my 54G, including password, transferred across automatically. Please advise if there are things I should be especially careful to do (or not do) when I install the 310N. Many thanks, Raymond

If you have Internet connection through the router you just need to do some wireless changes on your router, rather than transferring settings you can do this...
Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab-
-Here select manual configuration...Wireless Network mode should be mixed...
-Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the standard channel to 11-2.462GHz...
- And wireless SSID broadcast should be Enabled and then click on save settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bits.Leave the passphrase blank, don't type in anything...
Under WEP Key 1 type in any 10 numbers please(numbers only and no letters) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network.
Click on Advanced Wireless-
settings>>Change the Beacon Interval to 75 >>Change the Fragmentation...
Threshold to 2304 Change the RTS Threshold to 2307 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Similar Messages

  • I have a new Macbook Pro - trying to migrate files etc from my Macbook Air using a Thunderbolt Cable between the two.  I follow the directions but the two computers never "discover" each other.  WiFi connect works but 70 hours is a rough deal.

    I have a new Macbook Pro.  Trying to migrate files etc from my Macbook Air using a Thunderbolt Cable between them.
    I follow the directions but the two computers never "discover" each other - using a WiFi connection works but 70 hours is a rough deal.
    (Mac OS 10.8.2 on both computers)

    Are you trying target disk mode?
    http://support.apple.com/kb/PH10725
    Ciao

  • I can't migrate iPhoto library from time machine

    I have my iPhoto library backed up on time machine and want to restore it to a new mac mini, but every time I try, I create a new account and a blank photo library!
    If I try to get to the folder library in Finder on my Mac Mini I don't have permission to access.
    The time machine back-up is from a MBP, and I can access the library & folder from my MBP laptop. Is my only option to restore to MBP and then migrate from there? (I'd like to avoid doing this, because its a 60gb library and will end up taking a few days to migrate twice (once from TM to MBP and once from MBP to MM)

    Recover the iphoto library to a different location eg, a USB drive.. since there could be issues with the new photo app.

  • I recently migrated my MacBook from 10.5.8 to 10.6.8, using the Snow Leopard CD I purchased from Apple. Since then I have noticed a strange ozone smell coming from the MacBook in the area where the hinges are to open and close the unit. I was told by Appl

    I recently migrated my MacBook from 10.5.8 to 10.6.8, using the Snow Leopard CD I purchased from Apple. Since then I have noticed a strange ozone smell coming from the MacBook in the area where the hinges are to open and close the unit. I was told by Apple that it probably is not serious and is coming from the fans in the MacBook. It is true that the smell/odor is more intense when the fans are working. Apple said I should take the MacBook to an Apple Store to have the hardware checked out. Everything seems to be working correctly. I am backing up automatically wirelessly to a Time Capsule, which I had not done until recently, although I had purchased the Time Capsule in 2009. I have not noticed this odor before. Does anyone suspect something more serious that may be going on?

    You may be smelling it because with the new OS the processor is having to work harder causing it to get hotter then it would with the other OS.  I can't say there is nothing wrong, but what could be happening is just that, it's getting hotter so the fan is spinning faster and moving more air so you are getting more of the smell then you would before.  I would still continue to back it up, and take it to the Apple Store at a Genius Bar and have them look at it to make sure.  Was the computer ever in a smoky environment??

  • How do I migrate Photoshop CS from one laptop to another

    The old laptop is dying, has purchased a new one and need to migrate Photoshop CS from the old to the new.  How do I do this?  Thanks

    You deactivate it on the old system, then reinstall it on your new one using your serial number.
    Don't forget to copy all your data over.

  • Is it possible to migrate the app from latest version to older version

    Hi all,
    I have a adf application in jdeveloper 11.1.1.4.0.Due to some issues i have to do it in jdeveloper 11g release 2 (11.1.1.2.0).Is it possible to migrate the application from latest version to older version of jdev.
    Thanks.

    It's not officially supported, but you can try a couple of things - first open the application in the old version and see if it works.
    If it doesn't you can try creating a new application in the old version and then use the create project from existing source option to map to your existing code.
    This all of course assumes that you didn't use features in the new version that are not available in the old version.

  • Error while migrating repository files from Brio to Interactive reporting

    Hi,
    I am doing migration of Brio from 8.3.1 to Hyperion Interactive Reporting version 11.1.2.1. I am referring http://docs.oracle.com/cd/E12825_01/epm.111/hs_migration.pdf
    I am facing error when I am migrating resitory files from brio 8 to Interactive reporting version11 environment.
    Error [[ENOENT]] Accessing path: /c2cnas/Oracle/Hyperion_Home/EPMSystem11R1/products/biplus/opencat
    when I checked at my Linux server I do not see "opencat" directory under /c2cnas/Oracle/Hyperion_Home/EPMSystem11R1/products/biplus path. I don't know why this directory or folder was missed after Hyperion Interactive Reporting Installation. Do we need to create this folder manually for newer versions( 11.x)?
    Has anyone aware of this error? will it impact my migration? I am thinking that migration utility is looking to place .oce files in this directory but it could not find. is my understanding correct?
    Please help me on this.

    Usually in 11.1.2.1 the folder will be  "EPMSystem11R1\products\biplus\data\Open Catalog Extensions"
    I haven't seen a opencat folder.
    Can you check the migration logs.Also check permission for the user on the folders.
    Thanks,
    KK

  • JDeveloper 12c getting error after migration my Apps from JDeveloper 11.1.2.3

    Hi, I have migrated my application from JDeveloper 11.1.2.3 to JDeveloper 12c(12.1.2.0). My application cleaned and compiled successfully. Application Module tested successfully. But when i am running my application (ViewController)weblogic started but application not deployed, i am getting below error in JDeveloper Console.
    Processor.java:61)
            at oracle.jdeveloper.deploy.contrib.spi.DefaultStatefulProcessor.process
    (DefaultStatefulProcessor.java:158)
            at oracle.jdevimpl.deploy.contrib.processor.ProjectProjectDependencyJLib
    raryProcessor.processImpl(ProjectProjectDependencyJLibraryProcessor.java:135)
            at oracle.jdeveloper.deploy.contrib.spi.DefaultProcessor.process(Default
    Processor.java:61)
            at oracle.jdeveloper.deploy.contrib.spi.DefaultStatefulProcessor.process
    (DefaultStatefulProcessor.java:158)
            at oracle.jdevimpl.deploy.contrib.processor.ProjectDependenciesJLibraryP
    roxy$ProcessorImpl.processImpl(ProjectDependenciesJLibraryProxy.java:141)
            at oracle.jdeveloper.deploy.contrib.spi.DefaultProcessor.process(Default
    Processor.java:61)
            at oracle.jdeveloper.deploy.contrib.spi.DefaultStatefulProcessor.process
    (DefaultStatefulProcessor.java:158)
            at oracle.jdevimpl.deploy.contrib.processor.ProjectDependenciesJLibraryP
    rocessor.processImpl(ProjectDependenciesJLibraryProcessor.java:62)
            at oracle.jdeveloper.deploy.contrib.spi.DefaultProcessor.process(Default
    Processor.java:61)
            at oracle.jdeveloper.deploy.contrib.spi.DefaultStatefulProcessor.process
    (DefaultStatefulProcessor.java:158)
            at oracle.jdevimpl.deploy.contrib.processor.ProjectProjectDependencyJLib
    raryProcessor.processImpl(ProjectProjectDependencyJLibraryProcessor.java:135)
            at oracle.jdeveloper.deploy.contrib.spi.DefaultProcessor.process(Default
    Processor.java:61)
            at oracle.jdeveloper.deploy.contrib.spi.DefaultStatefulProcessor.process
    (DefaultStatefulProcessor.java:158)
            at oracle.jdevimpl.deploy.contrib.processor.ProjectDependenciesJLibraryP
    roxy$ProcessorImpl.processImpl(ProjectDependenciesJLibraryProxy.java:141)
            at oracle.jdeveloper.deploy.contrib.spi.DefaultProcessor.process(Default
    Processor.java:61)
            at oracle.jdeveloper.deploy.contrib.spi.DefaultStatefulProcessor.process
    (DefaultStatefulProcessor.java:158)
            at oracle.jdevimpl.deploy.contrib.processor.ProjectDependenciesJLibraryP
    rocessor.processImpl(ProjectDependenciesJLibraryProcessor.java:62)
            at oracle.jdeveloper.deploy.contrib.spi.DefaultProcessor.process(Default
    Processor.java:61)
            at oracle.jdeveloper.deploy.contrib.spi.DefaultStatefulProcessor.process
    (DefaultStatefulProcessor.java:158)
            at oracle.jdevimpl.deploy.contrib.processor.ProjectProjectDependencyJLib
    raryProcessor.processImpl(ProjectProjectDependencyJLibraryProcessor.java:135)
            at oracle.jdeveloper.deploy.contrib.spi.DefaultProcessor.process(Default
    Processor.java:61)
            at oracle.jdeveloper.deploy.contrib.spi.DefaultStatefulProcessor.process
    (DefaultStatefulProcessor.java:158)
            at oracle.jdevimpl.deploy.contrib.processor.ProjectDependenciesJLibraryP
    roxy$ProcessorImpl.processImpl(ProjectDependenciesJLibraryProxy.java:141)
            at oracle.jdeveloper.deploy.contrib.spi.DefaultProcessor.process(Default
    Processor.java:61)
            at oracle.jdeveloper.deploy.contrib.spi.DefaultStatefulProcessor.process
    (DefaultStatefulProcessor.java:158)
            at oracle.jdevimpl.deploy.contrib.processor.ProjectDependenciesJLibraryP
    rocessor.processImpl(ProjectDependenciesJLibraryProcessor.java:62)
            at oracle.jdeveloper.deploy.contrib.spi.DefaultProcessor.process(Default
    Processor.java:61)
            at oracle.jdeveloper.deploy.contrib.spi.DefaultStatefulProcessor.process
    (DefaultStatefulProcessor.java:158)
            at oracle.jdevimpl.deploy.contrib.processor.ProjectProjectDependencyJLib
    raryProcessor.processImpl(ProjectProjectDependencyJLibraryProcessor.java:135)
            at oracle.jdeveloper.deploy.contrib.spi.DefaultProcessor.process(Default
    Processor.java:61)
    Maroof

    Hi Timo, This application developed in 11.1.2.3, Now i am opened this application in JDev 12.1.2.0, This application is successfully compiled. But when i am running this apps in JDeve 12c(Integrated WLS) then Integrated WLS  started but Application not deployed, and i am getting below error.
    Jan 19, 2014 8:17:11 AM oracle.security.jps.util.JpsUtil disableAudit
    INFO: JpsUtil: isAuditDisabled set to true
    Jan 19, 2014 8:18:10 AM oracle.adf.share.config.ADFConfigFactory findOrCreateADFConfig
    INFO: Resource META-INF/adf-config.xml not found on the classpath.
    Jan 19, 2014 8:18:10 AM oracle.adf.share.config.ADFConfigFactory findOrCreateADFConfig
    INFO: A default implementation of ADFConfig is being created for application.
    This can lead to unexpected results in some cases. Please add a basic META-INF/adf
    -config.xml to your classpath to avoid functional errors.
    Jan 19, 2014 8:18:55 AM oracle.bali.xml.gui.base.inspector.TransactedPIMultiModel _updateProperties
    WARNING: SelectionModel has no selected items
    Jan 19, 2014 8:19:02 AM oracle.bali.xml.gui.base.inspector.TransactedPIMultiModel _updateProperties
    WARNING: SelectionModel has no selected items
    Jan 19, 2014 8:19:21 AM oracle.bali.xml.gui.base.inspector.TransactedPIMultiModel _updateProperties
    WARNING: SelectionModel has no selected items
    Processor.java:61) 
            at oracle.jdeveloper.deploy.contrib.spi.DefaultStatefulProcessor.process 
    (DefaultStatefulProcessor.java:158) 
            at oracle.jdevimpl.deploy.contrib.processor.ProjectProjectDependencyJLib 
    raryProcessor.processImpl(ProjectProjectDependencyJLibraryProcessor.java:135) 
            at oracle.jdeveloper.deploy.contrib.spi.DefaultProcessor.process(Default 
    Processor.java:61) 
            at oracle.jdeveloper.deploy.contrib.spi.DefaultStatefulProcessor.process 
    (DefaultStatefulProcessor.java:158) 
            at oracle.jdevimpl.deploy.contrib.processor.ProjectDependenciesJLibraryP 
    roxy$ProcessorImpl.processImpl(ProjectDependenciesJLibraryProxy.java:141) 
            at oracle.jdeveloper.deploy.contrib.spi.DefaultProcessor.process(Default 
    Processor.java:61) 
            at oracle.jdeveloper.deploy.contrib.spi.DefaultStatefulProcessor.process 
    (DefaultStatefulProcessor.java:158) 
            at oracle.jdevimpl.deploy.contrib.processor.ProjectDependenciesJLibraryP 
    rocessor.processImpl(ProjectDependenciesJLibraryProcessor.java:62) 
            at oracle.jdeveloper.deploy.contrib.spi.DefaultProcessor.process(Default 
    Processor.java:61) 
            at oracle.jdeveloper.deploy.contrib.spi.DefaultStatefulProcessor.process 
    (DefaultStatefulProcessor.java:158) 
            at oracle.jdevimpl.deploy.contrib.processor.ProjectProjectDependencyJLib 
    raryProcessor.processImpl(ProjectProjectDependencyJLibraryProcessor.java:135) 
            at oracle.jdeveloper.deploy.contrib.spi.DefaultProcessor.process(Default 
    Processor.java:61) 
    Maroof

  • I  have a new Mac Pro computer and have migrated my files from my older computer to the new computer. In trying to open a Lightroom catalog on an external hard drive  I keep on getting the message "lightroom cannot use the catalog named " " because it is

    I  have a new Mac Pro computer and have migrated my files from my older computer to the new computer. In trying to open a Lightroom catalog on an external hard drive  I keep on getting the message "lightroom cannot use the catalog named " " because it is  not writable and cannot be opened. I have fixed all the "permissions" and yet it will still not open. How do I fix this?

    Hello Forum Members,
    I figured it out. You have to select  the actual logo of the Lightroom catalog and then click on  "get info" and allow what ever your new user name to "read and write". That worked!
    Henri Silberman

  • How to migrate SSL Certificate from iPlanet 6.0 to WLS 8.1

    We'd like to migrate our application from iPlanet 6.0 to WLS 8.1, however, we don't have any idea to migrate the cert from iPlanet to WLS, please advise. Thanks!

    Apple does not support intermediate iOS updates...you can only update to the latest iOS version that will run on your iOS device.  Therefore, you have to update to iOS 8.1, not 7.1.2.  The files appropriate to your device are only available in 8.1.

  • How to migrate the datasource from Bea 8.1 to Bea 10

    Hi,
    I have to migrate an application from bea 8.1 to 10.
    the configuration in 8.1 is as follow : (config.xml)
    <JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
    InitialCapacity="10" KeepXAConnTillTxComplete="true"
    MaxCapacity="150" Name="adiosPool" Password="adios47"
    Properties="user=adios47"
    RemoveInfectedConnectionsEnabled="false"
    ShrinkFrequencySeconds="600" StatementCacheSize="100"
    SupportsLocalTransaction="false" Targets="server"
    TestConnectionsOnCreate="false" TestConnectionsOnReserve="true"
    TestFrequencySeconds="60" TestTableName="SQL SELECT 1 FROM DUAL" URL="jdbc:oracle:thin:@AXHE0.application.hvb.de:1521:AXHE0"/>
    <JDBCTxDataSource JNDIName="weblogic.jdbc.jts.adiosPool"
    Name="adiosPool" PoolName="adiosPool" Targets="server"/>
    and that is my new configuration : (config.xml)
    <jdbc-system-resource>
    <name>adiosPool</name>
    <descriptor-file-name>jdbc/adiosPool-0758-jdbc.xml</descriptor-file-name>
    </jdbc-system-resource>
    jdbc/adiosPool-0758-jdbc.xml :
    <?xml version='1.0' encoding='UTF-8'?>
    <jdbc-data-source xmlns="http://www.bea.com/ns/weblogic/90" xmlns:sec="http://www.bea.com/ns/weblogic/90/security" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wls="http://www.bea.com/ns/weblogic/90/security/wls" xsi:schemaLocation="http://www.bea.com/ns/weblogic/920 http://www.bea.com/ns/weblogic/920.xsd">
    <name>adiosPool</name>
    <jdbc-driver-params>
    <url>jdbc:oracle:thin:@AXHE0.application.hvb.de:1521:AXHE0</url>
    <driver-name>oracle.jdbc.OracleDriver</driver-name>
    <properties>
    <property>
    <name>user</name>
    <value>adios47</value>
    </property>
    <property>
    <name>portNumber</name>
    <value>1521</value>
    </property>
    <property>
    <name>SID</name>
    <value>HVAEE0</value>
    </property>
    <property>
    <name>serverName</name>
    <value>AXHE0.application.hvb.de</value>
    </property>
    </properties>
    <password-encrypted>{3DES}PMWtUXqoHT8=</password-encrypted>
    </jdbc-driver-params>
    <jdbc-connection-pool-params>
    <test-table-name>SQL SELECT 1 FROM DUAL</test-table-name>
    </jdbc-connection-pool-params>
    <jdbc-data-source-params>
    <jndi-name>weblogic.jdbc.jts.adiosPool</jndi-name>
    <global-transactions-protocol>TwoPhaseCommit</global-transactions-protocol>
    </jdbc-data-source-params>
    </jdbc-data-source>
    but when I start the server I get the following exception :
    START SERVER
    javax.naming.NameNotFoundException: While trying to lookup 'weblogic.jdbc.jts.adiosPool' didn't find subcontext 'jdbc'. Resolved 'weblogic'; remaining name
    'jdbc/jts/adiosPool'
    at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1138)
    at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:246)
    at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:171)
    at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:205)
    at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:213)
    at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
    at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:367)
    at javax.naming.InitialContext.lookup(InitialContext.java:351)
    what's wrong ?
    Thanks for your ideas

    Hi,
    This is realated to Upgrading your domain.You can upgrade your domain from bea weblogic8.1SP4 to Bea weblogic 10.You need to use the upgrade tool from bea weblogic platform10.You can start the Upgrade wizard tool from Windows Start->All Programs->BEA Products->Tools->DomianUpgradeWizard.The tool will take you to upgrade the domain automatically.Once you have upgraded the domian everything(database connection pools,users,groups,any other resources) in 8.1 domian will be changed to 10.
    Bea Support Complete upgradation of Application as well as application data from 8.1 to 9.2 or 10.0
    Thanks
    Bishnu
    Regards
    Bishnu

  • How to migrate Mail & Contacts from backup disk of old PPC iMac (10.3.9) to new iMac (10.8.1)?

    How to migrate Mail & Contacts from backup disk of old PPC iMac (10.3.9) to new iMac (10.8.1)? 
    The Firewire disk is connected and have been able to copy across document folders etc, but Migration Assistant doesn't find the disk so that method no good.  Any help appreciated.

    Thanks, that looks very comprehensive.  Wish I'd seen it before completing Set-Up Assistant initially!  Will follow his instructions and report back.

  • I can't migrate my data from my old pc to my new macbook pro

    Hi,
        I have been trying to migrate my data from my PC to my new mac but it always seems to fail.
    At first, I would begin the migration assistant and then after a while the PC would just crash.
    But then I finally thought I managed to get it working. It said that process was complete (on both the PC and mac), but there was no data on my computer and no music in my iTunes.
    If anyone has any advice I would really appreciate it!!
    PS I also have an Ethernet cable if that's of any use but I don't know how to use it.

    I suggest you stop using the Migrastion Assistant. Simple fact is, as you have found out, that it does not work most of the time and when it fdoes actuall transfer data it doesn't do it very well.
    Just network the 2 computer together over your LAN and copy and past the files you want to move to the Mac.
    Otr use an External drive, formatted either FAT32 or exFAT (doinig the formatting on the Windows PC) and then copy to the external from the Win PC and then copy from the external to the Mac.
    You'll be happier.

  • What are the steps to migrate j2ee project from version 1.4 to 1.6

    Hi All,
    What are the steps to migrate java project from version1.4 to 1.6 and weblogic 9 to 12c.
    Currently my application(java version1.4) is running on weblogic 9, i want to migrate it to weblogic 12c, what are the major steps i have to follow.
    Please anyone of you help me as soon as possible.
    Thanks,
    Yugandhar.G

    Hi Jeet,
    The following are the logs for exception.
    <Dec 13, 2012 12:04:52 PM CST> <Warning> <Socket> <BEA-000449> <Closing the socket, as no data read from it on 0:0:0:0:0:0:0:1:52,370 during the configured idle timeout of 5 seconds.>
    <Dec 13, 2012 12:07:14 PM CST> <Warning> <Deployer> <BEA-149251> <Operation Remove failed for application "tcs". Error: java.lang.NullPointerException
    java.lang.NullPointerException
         at weblogic.servlet.internal.WebAppModule.remove(WebAppModule.java:851)
         at weblogic.application.internal.flow.ModuleStateDriver$4.previous(ModuleStateDriver.java:236)
         at weblogic.application.internal.flow.ModuleStateDriver$4.previous(ModuleStateDriver.java:223)
         at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:148)
         at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:138)
         Truncated. see log file for complete stacktrace
    Caused By: java.lang.NullPointerException
         at weblogic.servlet.internal.WebAppModule.remove(WebAppModule.java:851)
         at weblogic.application.internal.flow.ModuleStateDriver$4.previous(ModuleStateDriver.java:236)
         at weblogic.application.internal.flow.ModuleStateDriver$4.previous(ModuleStateDriver.java:223)
         at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:148)
         at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:138)
         Truncated. see log file for complete stacktrace
    >
    <Dec 13, 2012 12:07:14 PM CST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID "1355371555961" for task "1". Error is: "java.lang.ArrayIndexOutOfBoundsException: 8"
    java.lang.ArrayIndexOutOfBoundsException: 8
         at com.bea.objectweb.asm.ClassReader.readUnsignedShort(Unknown Source)
         at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
         at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
         at weblogic.application.utils.annotation.ClassInfoImpl.<init>(ClassInfoImpl.java:44)
         at weblogic.application.utils.annotation.ClassfinderClassInfos.polulateOneClassInfo(ClassfinderClassInfos.java:145)
         Truncated. see log file for complete stacktrace
    Caused By: java.lang.ArrayIndexOutOfBoundsException: 8
         at com.bea.objectweb.asm.ClassReader.readUnsignedShort(Unknown Source)
         at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
         at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
         at weblogic.application.utils.annotation.ClassInfoImpl.<init>(ClassInfoImpl.java:44)
         at weblogic.application.utils.annotation.ClassfinderClassInfos.polulateOneClassInfo(ClassfinderClassInfos.java:145)
         Truncated. see log file for complete stacktrace
    >
    <Dec 13, 2012 12:07:14 PM CST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application "tcs".>
    <Dec 13, 2012 12:07:14 PM CST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
    java.lang.ArrayIndexOutOfBoundsException: 8
         at com.bea.objectweb.asm.ClassReader.readUnsignedShort(Unknown Source)
         at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
         at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
         at weblogic.application.utils.annotation.ClassInfoImpl.<init>(ClassInfoImpl.java:44)
         at weblogic.application.utils.annotation.ClassfinderClassInfos.polulateOneClassInfo(ClassfinderClassInfos.java:145)
         Truncated. see log file for complete stacktrace
    Caused By: java.lang.ArrayIndexOutOfBoundsException: 8
         at com.bea.objectweb.asm.ClassReader.readUnsignedShort(Unknown Source)
         at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
         at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
         at weblogic.application.utils.annotation.ClassInfoImpl.<init>(ClassInfoImpl.java:44)
         at weblogic.application.utils.annotation.ClassfinderClassInfos.polulateOneClassInfo(ClassfinderClassInfos.java:145)
         Truncated. see log file for complete stacktrace
    >
    <Dec 13, 2012 12:07:17 PM CST> <Error> <Console> <BEA-240003> <Administration Console encountered the following error: weblogic.application.WrappedDeploymentException: 8
         at com.bea.objectweb.asm.ClassReader.readUnsignedShort(Unknown Source)
         at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
         at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
         at weblogic.application.utils.annotation.ClassInfoImpl.<init>(ClassInfoImpl.java:44)
         at weblogic.application.utils.annotation.ClassfinderClassInfos.polulateOneClassInfo(ClassfinderClassInfos.java:145)
         at weblogic.application.utils.annotation.ClassfinderClassInfos.populateClassInfos(ClassfinderClassInfos.java:137)
         at weblogic.application.utils.annotation.ClassfinderClassInfos.<init>(ClassfinderClassInfos.java:28)
         at weblogic.application.utils.annotation.AnnotationMappingsImpl.loadAnnotatedClasses(AnnotationMappingsImpl.java:69)
         at weblogic.application.internal.ApplicationContextImpl.processAnnotationMappings(ApplicationContextImpl.java:985)
         at weblogic.application.internal.ApplicationContextImpl.getAnnotatedClasses(ApplicationContextImpl.java:1010)
         at weblogic.j2ee.managedbean.ManagedBeanModuleExtensionFactory.create(ManagedBeanModuleExtensionFactory.java:43)
         at weblogic.servlet.internal.WebAppModule.initModuleExtensions(WebAppModule.java:562)
         at weblogic.servlet.internal.WebAppModule.init(WebAppModule.java:271)
         at weblogic.servlet.internal.WebAppModule.init(WebAppModule.java:636)
         at weblogic.application.internal.flow.ScopedModuleDriver.init(ScopedModuleDriver.java:162)
         at weblogic.application.internal.ExtensibleModuleWrapper.init(ExtensibleModuleWrapper.java:74)
         at weblogic.application.internal.flow.ModuleListenerInvoker.init(ModuleListenerInvoker.java:84)
         at weblogic.application.internal.flow.InitModulesFlow.initModule(InitModulesFlow.java:312)
         at weblogic.application.internal.flow.InitModulesFlow.initModules(InitModulesFlow.java:325)
         at weblogic.application.internal.flow.InitModulesFlow.prepare(InitModulesFlow.java:378)
         at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:706)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:35)
         at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:237)
         at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:61)
         at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:158)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:207)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:96)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:229)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747)
         at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250)
         at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:13)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:46)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    >

  • Migrating Time Capsule from 1TB to 2TB

    Hi, I'm currently having an issue with my *Time Machine* ( TM ), these are the facts...
    Yesterday...
    I had a MacBook, an external *350GB HD* almost full and a 1TB *Time Capsule* ( TC ) only used by TM with backups _since april 2009_...
    Today...
    I have the same MacBook, my external *350GB HD* has just filled up, a new *2TB TC*, and the old *1TB TC* with my backups mentioned above.
    So I want to...
    Redirect my TM backups from the *1TB TC* to the new *2TB TC* in order to dismiss my old fashioned *350GB HD* after and replace it with the old *1TB TC* used as an external HD (kind of a replacing waterfall made in the correct order, dismissing the little and oldie one by a newer and more powerful, and so on).
    I do fine when redirecting (change disk option at TM preferences) the TC from the 1TB to the 2TB but backups (_since april 2009_) get lost when entering *TM _unless using back_* the *1TB TC*...
    I find no way to migrate all my backups to the newer and bigger TC (That's what makes my TM worthy)...
    I've tried twice each of the following...
    1) To backup the *1TB TC* but the disk image is what gets backed up.
    2) Copy the Disk Image (550GB) from TC to TC but access privileges interfere when copying the disk image file (at 250GB progress = 50%)... I get a not enough privileges message but I'm "super user" in both TCs.
    I've tried the process either wirelessly (both on the same wireless network) and via ethernet, both through an *Airport Extreme* as main router.
    Essential issues like being connected to both TCs, passwords (if any) and having no problems on network issues (all green light markers on hardware) are held.
    What do I do...? I just want to migrate my backups from one TC to another (bigger) one.
    Now I'm in the mood of mounting both backup volumes (after creating an empty one on 2TB TC) and copy manually every backup folder created there from TC2TC... however, I'd like to know if there is another way... I mean... there should be!

    Maiqui wrote:
    What do I do...? I just want to migrate my backups from one TC to another (bigger) one.
    try this:
    JGG

Maybe you are looking for

  • Video pod cast help

    i have succesfully added a video podcast to itunes thru iweb. the pod cast is up and running on itunes. i made the second podcast and put it into iweb. how do i get it to go to itunes? thanks for helpin the newb!

  • Cursor did not return data if using variables in the where clause

    ENV: report builder 9.0.4.3.0, DB 10g, OS XP table and data ctvctyp: ctvctyp_code    ctvctyp_code_pred    CO               Z1    FE                   Z1 FUNCTION get_case_type(case_type VARCHAR2) RETURN VARCHAR2 IS   cursor  type_cur is     select ct

  • ITunes crashes, whenever I want to listen to music

    I don' have any problems to import music from CDs to my hard disc, but then ITunes crashes whenever I want to listen to music from my hard disc. Usually not only iTunes, but alll the OS. Could somebody please tell me what might be the reason for that

  • Cannot determine sdm host

    Hi, I'm developiny webdynpro application usin NetWeaver Developer studio. While I deploy the error below appaers in log. How can I solve? Thanks. Sep 16, 2008 12:49:52 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread

  • Workgroup Manager doesn't show all group members

    Hello, Workgroup Manager does not display all members of certain a certain group I defined a while ago. I figured out that it is very likely that the group record is corrupt - or at least it is not interpreted the right way anymore. What confused me