Migrating (uninstalling and reinstalling) agents from 12.1.0.1 to 12.1.0.2
We have an existing Cloud Control 12.1.0.1 installation with about 40 agent deployments across our enterprise. Having run into many bugs in 12.1.0.1 that are ostensibly fixed in 12.1.0.2, we are planning to upgrade - however it appears that the recommendation is to install a new 12.1.0.2 Cloud Control and migrate agents from the old system to the new.
We have installed the new system, but are looking for an efficient way to migrate the existing agents, as the Oracle docs state that the agent must be removed from the original 12.1.0.1 system prior to adding to the new 12.1.0.2 system. Not sure if Oracle docs are incomplete, as none of the instructions reference using the Cloud to 'Remove Target' on the agent (yet this functionality appears to exist) - I am hoping that given that we are able to deploy an agent through cloud we should also be able to remove it via cloud?
If not, is the only way to remove by using the runInstaller -deinstall in each agent home across our enterprise? If so, the docs are somewhat sparse on which installed products to remove with the graphical installer, should I be removing:
- agent12g1
- sbin12g1
- oracle_sysman_xxxxxx_12_1_0_1_0_discovery_Home0 (and all permutations?)
Hi ngilbert
If my understanding is not correct from your posting, drop me an email and we can discuss your requirement further.
1) if you are upgrade your agents from 12.1. to 12.2 then you have to use agent upgrade console to do that and it does an out of place agent upgrade ( you get a new agent home)
To clarify, you don’t have to re-install the agent to upgrade an agent from 12.1 to 12.2. You can argue that out of place upgrade is equivalent to fresh install of 12.2 but as a part of this agent upgrade process we upgrade plug ins, migrate the agent config and other details.
2) If your concern is how to delete the old 12.1 agent home on multiple target host after agent upgrade? Then yes, this an requirement for us to automate this process to clean up the old agent homes while doing an agent upgrade from 12.1. to 12.2. For time being, as I mentioned earlier we detach the old 12.1 agent home from inventory so the only thing you have to do is to remove the old home directories.
3) Are you also trying to migrate your operating system on the OMS or Repository host as a part of this upgrade ?
Similar Messages
-
how do I STOP this from updating to NEW VERSION? I am getting tired of uninstalling and reinstalling every 10 uses. Ver.10 is Garbage!!!!!
WHEN it decides to run it does NOT member passwords.
And besides, if I WANTED NEW I would DOWNLOAD NEW!!!
''[Profanity removed by moderator. Please read [[Forum and chat rules and guidelines]], thanks.]''This issue can be caused by the presence of leftover files in the Firefox program folder (defaults\pref) like a file firefox.js that overrides the update URL with a wrong link.
Do a clean reinstall and be sure to remove the Firefox program folder.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* [/questions/826858] -
Hi Can anyone please tell me from where I can download the Photoshop CS6 program I purchased a download (media less) some 2 years ago and all has been OK up to know but I am know having issues and would like to uninstall and reinstall. I have the relevant codes and activation keys but would need to be sure I can obtain the program again before I start. Thank you
Make sure you are dealing with the correct product for the serial number. If the serial number is for a full creative suite then you need to get the suite, not the individual application, and vice versa.
Unrelated to that, in case it helps, here is a link to another site. You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html -
Why won't Adobe reader no longer let me view previously download (from Safari) pdf's? I am running OSX 10.8.5 and have uninstalled and reinstalled latest version of Reader. I get this error message "Adobe Reader could not open 'OD Test Bed Proposals_0.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)." I have tried changing the 'open with' options too. Thanks
Try this:
Go to: Mac HD/Library/Internet Plug-ins
Trash the AdobePDFViewer.plugin and AdobePDFViewerNPAPI.plugin files
Empty the trash
Relaunch Safari. You can now download undamaged PDFs. -
CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it. I performed a Time Machine installation from that 2011 machine, and only Distiller and Acrobat would launch (none of the rest of the creation apps). So I ran the CS5.5 installer, uninstalled, then reinstalled, producing the same result. When I try to launch, nothing happens. What next?
Try...
Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html -
Edit In Photoshop from lighroom suddenly stopped working. I have tried uninstalling and reinstalling both and still not working.
What error message are you getting? If none then in Lightroom Preferences> General> check "reset all warning dialogs"
Try again and see what message pops up. -
I have Windows 7 Pro with Acrobat Pro XI. I keep getting Error 1328 when trying to update Pro XI. Doesn't matter if I try from the Help menu in Acrobat or when I get a notice in my SysTray that an Adobe update is available. I already tried what Adobe recommended to uninstall and reinstall from my DVD. I still get the 1328 error and will not update my Adobe. Any suggestions?
Also, this is the error message I receive:
-
When trying to update Acrobat XI I get a 1328 error each time. I have uninstalled XI and reinstalled it from disk. When trying to update the newly installed XI I still get the 1328 error. I have searched my C: drive for the file C:\config\Msi\PTA082.tmp but with no sucess. Any suggestions?
Hi Berriedale,
Please try the below steps and check.
Turn off any antivirus or software security program.
Download the update patch 11.0.10 manually from the below link and run it.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5859
Regards,
Anand -
My ipod gen 3 is frozen after the latest update from itunes,it will not power on or restore without error.Itunes is up to date,changed usb ports,even uninstalled and reinstalled all apple software, error 1601 during restore
Hello, VvioletT.
Thank you for visiting Apple Support Communities.
I see you are experiencing issues syncing your iOS device. Here are a couple articles that I would recommend going through when experiencing this issue.
iOS: Troubleshooting USB-related alerts when syncing
http://support.apple.com/kb/TS5254
Resolve issues between iTunes and security software
http://support.apple.com/kb/ts3125
Cheers,
Jason H. -
I bought and was charged for some music. It is not in check for available downloads or the purchased file. It does show up on my view my account recent purchases. Where could this music be? I recently recovered from an iTunes problem and had to uninstall and reinstall and finally manged to get everything back to work. Except for this most recent purchase which just happens to be my son's band so I would really like to have it.
Start with this article.
http://support.apple.com/kb/TS1408
If you live in the US, you can always redownload the music at no cost. See this article for information.
http://support.apple.com/kb/ht2519
And if nothing else, try contacting iTunes support and explaining the situation to them.
http://www.apple.com/support/itunes/contact.html
B-rock -
Since my last software update, my iphoto 11 will not import any photos from any source. The circle just spins...when I go to force quit, it says iphoto not responding. Backed up iphoto library, uninstalled and reinstalled iphoto. Still not working. Help!
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
"Please uninstall and reinstall the product." This is the error message I am getting. I am afraid to uninstall from my old computer because I don't have the original paperwork. Should I jot down some information before I uninstall my CS5?
You'll need your serial number or proof of purchase. It's really no different than any other kind of software.
If you need help with you serial number, contact web chat. Here's a link:
Adobe ID, sign in, and account help -
Just had to replace iPad and itunes has following error. "iTunes was unable to load provider data from Sync Servies. Reconnect or try again later." I read that others suggest uninstalling and reinstalling iTunes. If I do this, will I lose my old iPad's backup that I need to restore to this new one?
I've resolved the issue with iTunes constantly not responding. It's a bit embarrassing. I had a DVD in the drive that was corrupt, and once I was able to remove it - BAM - iTunes ran perfectly.
I'm still getting the Sync Services message, and my backups are still not showing in iTunes.
Getting there.... I hope! -
My ipod touch has lost touch with my itunes account. I appear to have lost all my audiobooks from itunes and a nook I downloaded from audible.com last week is on my itunes but I cannot syn it to my ipod. I have tried uninstalling and reinstalling itunes but this did not work and I now have a different screen with itunes which I am not familiar with. I need my ipod for audiobooks and podcasts because I have a visual impairment.
iTunes 11 does some thinks differently. See:
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
or
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
Also
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar -
HT1923 HOW TO UNINSTALL AND REINSTALL ITUNES 10.6 FROM VISTA
I have tried everything......including Best Removal Tool with forced uninstall and I still cannot get all of the files off Vista so I can reinstal iTunes. This problem started when I was told to download the latest version (10.6) of itunes. It did not function properly after I did that and told me to uninstall and reinstall itunes. Can anyone help me?
Many thanks.
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
Does iTunes launch properly now?
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes
Maybe you are looking for
-
Major Safari bug re: private browsing
Hi everyone, I'm encountering a major bug in Safari's private browsing mode. Basically, after you exit Safari, even if you close all previous tabs and use Settings to clear the cache, after you return again to Safari's private browsing mode it briefl
-
ECC 6.0 and WE62 in tree view (IDOC documentation)
Hi, we have just upgraded our ERP system from R/3 4.6C to ECC 6.0, new WE62 for IDOC documentation is in html mode only. Is it possibile to use old-style WE62 in tree-view mode ? Regards. Ganimede Dignan.
-
Number of Copies to Print Based on Database Field
Post Author: Ltreat CA Forum: Formula I am a newbie with Crystal Reports XI. I am new to this forum. I have a report that I am printing from Crystal Reports XI. My database has a field called {database.drop-loc}. If the field has a value of 50, I
-
X201: Bluetooth lost after update to 8.1
Dear All, A few months ago I changed the old default Windows operating system to Windows 8. Everything worked fine. However, recently, the system auto-updated to Windows 8.1 and Bluetooth disappeared! My old BT devices are still there if g
-
Loading PSD for the image control...
Greetings ! I am creating a desktop (AIR) application for graphic designers to give them the ability to browse their media (image, video) ressource files on their harddrives. Can FLEX be used to display ADOBE native file formats ? (e.g .PSD, .SWF, .P