Migrating Views from SP 2010 to 2013

Hi there,
is there a way to import/export custom List Views from SP 2010 to SP 2014?
One of our Lists, which we are importing, has 25 custom views and recreating each one from scratch is a rather long and tiresome process. So a way to import and export custom views would be very helpful.
Thanks

Hi,
Please check if it helps you
http://sharepoint.stackexchange.com/questions/68319/how-do-i-copy-a-sharepoint-2010-view-into-a-new-view-preserving-custom-formatt
Please remember to click 'Mark as Answer' on the answer if it helps you

Similar Messages

  • Body of Accept/Decline messages from resource room mailboxes blank when viewed with Outlook 2010 or 2013.

    I stumbled across a funny little problem yesterday after a rash of users calling wanting to know why rooms were declining their meeting requests..
    The rooms were declining for perfectly legitimate reasons.. Conflicts or no end date but the accept/decline reply messages the rooms were sending out had no details in the message body when viewed from Outlook 2010 or 2013.
    If message preview is enabled in Outlook 2013 you can read a few lines of the body in the inbox view but it's still blank when you open the message.
    Reading pane is also blank.
    Opening the message from OWA or my phone shows the complete message body.
    Very odd. It reminds me of the bug in Exchange 2013 CU2 where meeting invites to external users were sent blank unless they were sent as iCalendar.
    Maybe this will resolve itself when I load SP1 in a few weeks.
    Any one else seeing this?
    We are running 2013 CU 3

    Hi Scott,
    I have tested in my Exchange 2013 CU1 environment and I can reproduce your issue in Outlook online mode. Please check whether the problematic users are using Outlook Online mode in Outlook 2010 and Outlook 2013.
    The issue doesn’t happen in OWA and Outlook Cached mode. Therefore, I recommend users can change their Outlook client to Cached mode as a workaround. To do it, we can:
    Open Outlook, click File > Account Settings > Account Settings. Double-click the account, check Use Cached Exchange Mode > Next and finish it. Restart Outlook to use it in cached mode.
    Thanks,
    Winnie Liang
    TechNet Community Support

  • Migrating user from Exchange 2010 to Exchange 2013 succeeds but OWA redirects to 2010

    Hello everyone,
    I am migrating users from exchange 2010 to 2013, Users migration works perfectly and completes without any issue but after the user migration finishes I try to login to OWA but user goes to OWA exchange 2010 not 2013 as if the mailbox has not been migrated. 
    I have checked the HomeMDB attribute and I can see the new database on 2013 is located there. how to solve this? I have retransfered the user back to 2010 and 2013 but it didn't work.
    I would appreciate your help.
    Thanks
    Mohammed JH

    Hi Amit
    After 30 mins approximately we checked the inboxes that have been migrted (2) and we found out they are working.
    İ wonder why there is this delay ? İ have already done migration before but it never took this much time. İ would appreciate your reply.
    Thanks
    Mohammed JH

  • OWA still lands at Exchange 2010 for users migrated from Exchange 2010 to 2013

    I never had any issues with OWA redirection for a few users that I migrated from Exchange 2010-2013 initially. For users that I am migrating in the past few days, the OWA 2013 is landing on Exchange 2010 despite the mailbox being successfully migrated to
    Exchange 2013.
    Troubleshooting:
    1. I have restarted the IIS Services
    2. I have restarted MSExchangeOWAAppPool.
    3. I have also checked the homeMDB attribute of the 2013 migrated user with the Exchange 2013 database.
    I would really appreciate if anyone could share their experiences on similar issues.

    I have checked it, the migration status is completed. In regard to the namespaces, both CAS 2010 and 2013 are set to mail.domain.com; CAS 2013 is the internet facing. I have also checked the internal access for OWA, it's the same scenario. Migrating them
    back to 2010 and 2013 won't resolve the issue in my case, because the issue persists for every new user that I am migrating.
    I recently found the following when I login with a user who is not effected and then logout:
    1. Login in back with the affected user without closing the browser or clearing the cache, it lands at CAS 2013 OWA.
    2. However, I get the below listed error message when I logout. 
    Your request couldn't be completed.
    Click here to continue working.
    This may have occurred for security reasons or because your session timed out.

  • Manually Move Public Folders from Exchange 2010 to 2013

    Hi all,
    I have a issue to finishing my migration from Exchange 2010 to Exchange 2013, I have been trying to migrate my Public folders but always after a couple hours, the migration state is failed.
    The final error is the following:
    FailureCode                      : -2146233088
    FailureType                      : SourceMailboxAlreadyBeingMovedPermanentException
    FailureSide                      :
    Message                          : Error: Couldn't switch the mailbox into Sync Source mode.
                                       This could be because of one of the following reasons:
                                         Another administrator is currently moving
    the mailbox.
                                         The mailbox is locked.
                                         The Microsoft Exchange Mailbox Replication
    service (MRS) doesn't have the correct
                                       permissions.
                                         Network errors are preventing MRS from cleanly
    closing its session with the
                                       Mailbox server. If this is the case, MRS may continue
    to encounter this error for
                                       up to 2 hours - this duration is controlled by the TCP
    KeepAlive settings on the
                                       Mailbox server.
                                       Wait for the mailbox to be released before attempting
    to move this mailbox again.
    So, after seeing this I started to monitoring all process and I realized that after creating hierarchy the process start to fail and keep in StalledDueMailboxlock status, and the error is:
    FailureCode                      :
    FailureType                      :
    FailureSide                      :
    Message                          : Informational: The request has been temporarily postponed because the mailbox is
                                       locked. The Microsoft Exchange Mailbox Replication service
    will attempt to continue
                                       processing the request after 2/14/2015 12:38:20 PM.
    Finally, digging more into reports of migration I  found this:
    MapiExceptionNetworkError: MapiExceptionNetworkError: Unable to open entry ID. (hr=0x80040115, ec=6)_x000A_Diagnostic context:_x000A_ Lid: 40487 EMSMDBMT.EcDoRpcExt2 called [length=73]_x000A_ Lid: 44583 EMSMDBMT.EcDoRpcExt2
    exception [rpc_status=0x6][latency=0]_x000A_ Lid: 62184 _x000A_ Lid: 16280 dwParam: 0x0 Msg: EEInfo: ComputerName: n/a_x000A_ Lid: 8600 dwParam: 0x0 Msg: EEInfo: ProcessID: 51452_x000A_ Lid: 12696 dwParam: 0x0 Msg: EEInfo: Generation Time: 0415-02-14T14:25:40.9210000Z_x000A_
    Lid: 10648 dwParam: 0x0 Msg: EEInfo: Generating component: 2_x000A_ Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 6_x000A_ Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 1741_x000A_ Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0_x000A_ Lid: 11672 dwParam:
    0x0 Msg: EEInfo: NumberOfParameters: 0_x000A_ Lid: 23260 Win32Error: 0x6_x000A_ Lid: 61553 StoreEc: 0x80040115_x000A_ Lid: 52176 ClientVersion: 15.0.1044.25_x000A_ Lid: 50032 ServerVersion: 14.3.181.6_x000A_ Lid: 50128 _x000A_ Lid: 50288 _x000A_ Lid: 23354
    StoreEc: 0x80040115_x000A_ Lid: 25913 _x000A_ Lid: 21817 ROP Failure: 0x80040115_x000A_ Lid: 22894 _x000A_ Lid: 24942 StoreEc: 0x80040115
    So, would like to know if exist any procedure to migrate/move my Public Folders from Exchange 2010 to 2013 manually, something like Export/Import.
    Regards!

    What script and process you are running to migrate the Public Folders?
    And what do you mean by Manually?
    Cheers,
    Gulab Prasad
    Technology Consultant
    Blog:
    http://www.exchangeranger.comTwitter:
    LinkedIn:
    Check out CodeTwo’s tools for Exchange admins
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Migrate contacts from Skype to Lync 2013

    Hi
    Just need to get help for how to migrate contacts from Skype to Lync 2013 client ? Is there any special third party or Microsoft solutions to provide such service ?
    Thanks
    Regards
    WenFei

    Not possible and no third party that I am aware of.
    JP
    If a post is helpful, please take a second to hit the green arrow on the left, or mark as answer, thanks.
    Jean-Philippe Breton | Senior Microsoft Consultant | MCTS, MCITP, MCT, Lync MVP

  • List teamplate (template created on migrated custom list from SP 2010 to 2013) not appearing in Add an app section in SP 2013

    We have migrated from SP 2010 to SP 2013. When we are trying to create list template from the migrated OOB custom list. List template successfully created but it is not appearing in Add an app section in SP 2013.

    Please make sure you have activated "Team Collaboration Lists" feature under Site Features. Also check if the template in the list template gallery is published.

  • Afte mirgation from SP 2010 to 2013, change the search box image size in sharepoint 2013

    Hi,
    After migration from 2010 to 2013, the search box image size increased. Pls check the screenhot below,
    I
    i need to resize this searc image.
    Any help is much appreciated.
    Thanks
    Smile Always

    I assume you have made some changes to this out of box search 
    you will have to take help from a CSS expert to select the div of this image and resize it. it has to be updated in css file on the server
    You can use developer(f12) tool in IE to test that 

  • Copy UCC from Exchange 2010 to 2013

    I'm starting to setup my Exchange 2013 server. I'm able to migrate users from 2010 and access their mailbox. I'd like to export the UCC SSL cert from 2010 to 2013. The cert if from GoDaddy. Do I need to add the SAN name of the new Exchange 2013 server to
    the certificate? If so, how will that affect my 2010 server?
    Is the process to export from Exchange 2010 and do an import on the 2013 server? What else am I missing? 

    Hi,
    Do you access the 2013 FE server’s address and log on a Exchange 2010 user? If so, it is a expected behavior, see below:
    http://technet.microsoft.com/en-us/library/bb310763(v=exchg.141).aspx
    If an Exchange 2013 user log on the Exchange 2013 OWA but he is still redirected to the Exchange 2010 OWA, I suggest we check the redirection setting on the Exchange 2013 ‘s Default
    web site and OWA Virtual Directory.
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • How do I migrate views from MS SQL 2008 to Oracle 11g through SQL Developer

    Is there any way to migrate the views from MS SQL 2008 to Oracle 11g through SQL Developer? Please give me some detail steps. Thanks for your help.
    Kevin

    Hi Kevin,
    user13531850 wrote:
    Hi Turloch,
    When I use migrate to oracle, I got a problem, the migrate tool create a new schema for me in my case (AZTECA_KSMMS), it migrates all the stuffs under that schema (AZTECA_KSMMS). However my application need the all the Oracle data under schema AZTECA instead of AZTECA_KSMMS. Is there any way to specify specific schema (AZTECA) for target oracle database? Schema remapping is available:
    First Capture (separately) then during right click convert on the captured model there is a Specify the conversion options with a Object Naming tab where the schema (and other) name changes are editable.
    I have not used this recently.
    Also during the migration process, when I choose repository, there is a check box for truncate to reset repository to empty state, Do I need to check that truncate Check Box so the repository will be cleared from last migration?The repository can hold multple migration attempts. Check truncate to get rid of previous attempts information. This cleans up the repository - not the destination database.
    There are also online database and offline database options during the migration process, what are the difference between these two choices? After I migrated to Oracle, all my views has a red cross icon next to it. Does that mean the view migration is failed or not? Please give me your comments. Thanks for your help.offline: for big (amount of data) databases with simple data types,
    uses bcp + files + scripts + sqlldr.
    online: for small (amount of data) databases (easier),
    uses (Java) jdbc.
    The view is likely to be broken - recompiling it may help.
    The Oracle schema is created using a .sql file - see under generated in the directory you gave originally in the wizard. There is a .out file that contains the result of running this script including any errors. During conversion there are also likely to be warnings displayed on the UI.
    There may be a single issue that is causing multiple issues - if viewa depends on functionb, and functionb is broken, viewa will also fail.
    >
    Kevin-Turloch
    SQLDeveloper Team

  • MDT 2013, D: Wim not applying after update from MDT 2010 to 2013

    Updated MDT from MDT 2010 Update 1 to MDT 2012 Update 1, uninstalled WAIK, Installed MDT 2013, and then ADK, Upgraded all Deployment shares along the way, and now the extra drive (D:) Wim will not apply to Drive, i have tried two different ways to handle
    the said action, the first was using the Unattend.xml, adding the  DataImage Action, the other was using an Imagex command from the MDT task sequence. neither is applying the Wim, before the upgrade this worked. has any one else had this issue? 
    Thank you, 
    Dane Zittritsch
    Thinix Support Manager

    I moved from MDT 2010 to MDT 2013 and its just not working, i have tried a few different methods, the old way we used the
    Unattend.xml and placed a install order and that always worked, but now i am trying to use Imagex and its not applying the wim, when i get in the image the D:\ (Second Drive) is missing files.  Now here is the weird part, if i re-run the task sequence
    the D WIM is applied, but that's counter productive. i will apply my TS.xml information. 
    Ts.xml
    <?xml version="1.0"?>
       -<sequence description="A complete task sequence for deploying a client operating system" name="Standard Client Task Sequence" version="3.00"> -<globalVarList> <variable name="OSGUID" property="OSGUID">{52bb4035-96e5-46f3-9d17-3d2a363895c3}</variable>
          <variable name="DestinationDisk" property="DestinationDisk">0</variable>
          <variable name="DestinationPartition" property="DestinationPartition">2</variable>
         <variable name="DestinationOSVariable" property="DestinationOSVariable">OSDisk</variable>
         <variable name="DestinationOSRefresh" property="DestinationOSRefresh"/>
         <variable name="DestinationOSDriveLetter" property="DestinationOSDriveLetter"/>
         <variable name="DestinationOSInstallType" property="DestinationOSInstallType">ByDiskPartition</variable>
    </globalVarList>
    -<group description="Initialize the TS environment" name="Initialization" expand="true" continueOnError="false" disable="false">
    - <step description="" name="Gather local only" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="BDD_Gather"> -<defaultVarList> <variable name="GatherLocalOnly"
    property="GatherLocalOnly">true</variable> <variable name="RulesFile" property="RulesFile"/> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIGather.wsf"</action> </step> </group> -<group description="Test"
    name="Validation" expand="true" continueOnError="false" disable="false"> -<condition> -<operator type="or"> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">PHASE</variable> <variable
    name="Operator">equals</variable> <variable name="Value">VALIDATION</variable> </expression> </operator> </condition> -<step description="" name="Validate" continueOnError="false" disable="false" startIn="" successCodeList="0
    3010" type="BDD_Validate"> -<defaultVarList> <variable name="ImageSize" property="ImageSize">0</variable> <variable name="ImageProcessorSpeed" property="ImageProcessorSpeed">800</variable> <variable name="ImageMemory" property="ImageMemory">768</variable>
    <variable name="VerifyOS" property="VerifyOS">CLIENT</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIValidate.wsf"</action> </step> -<step description="" name="Check BIOS" continueOnError="false" disable="false"
    startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIBIOSCheck.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
    property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step>
    -<step description="" name="Next Phase" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> </step> </group> -<group description="" name="State Capture" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable
    name="Variable">PHASE</variable> <variable name="Operator">equals</variable> <variable name="Value">STATECAPTURE</variable> </expression> </condition> -<step description="" name="Next Phase" continueOnError="false"
    disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
    property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step>
    </group> -<group description="" name="Preinstall" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">PHASE</variable>
    <variable name="Operator">equals</variable> <variable name="Value">PREINSTALL</variable> </expression> </condition> -<step description="" name="Gather local only" continueOnError="false" disable="false" startIn="" successCodeList="0
    3010" type="BDD_Gather"> -<defaultVarList> <variable name="GatherLocalOnly" property="GatherLocalOnly">true</variable> <variable name="RulesFile" property="RulesFile"/> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIGather.wsf"</action>
    </step> -<group description="" name="New Computer only" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">DeploymentType</variable>
    <variable name="Operator">equals</variable> <variable name="Value">NEWCOMPUTER</variable> </expression> </condition> -<step description="" name="Validate" continueOnError="false" disable="false" startIn="" successCodeList="0
    3010" type="BDD_Validate"> -<defaultVarList> <variable name="ImageSize" property="ImageSize">0</variable> <variable name="ImageProcessorSpeed" property="ImageProcessorSpeed">800</variable> <variable name="ImageMemory" property="ImageMemory">768</variable>
    <variable name="VerifyOS" property="VerifyOS">CLIENT</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIValidate.wsf"</action> </step> -<step description="" name="Format and Partition Disk" continueOnError="false"
    disable="true" successCodeList="0 3010" type="SMS_TaskSequence_PartitionDiskAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="OSDDiskIndex" property="DiskIndex">0</variable> <variable name="DONotCreateExtraPartition"
    property="DONotCreateExtraPartition"/> <variable name="OSDPartitions0Type" property="Partitions0Type">Primary</variable> <variable name="OSDPartitions0FileSystem" property="Partitions0FileSystem">NTFS</variable> <variable name="OSDPartitions0Bootable"
    property="Partitions0Bootable">True</variable> <variable name="OSDPartitions0QuickFormat" property="Partitions0QuickFormat">True</variable> <variable name="OSDPartitions0VolumeName" property="Partitions0VolumeName">OSDisk</variable>
    <variable name="OSDPartitions0Size" property="Partitions0Size">100</variable> <variable name="OSDPartitions0SizeUnits" property="Partitions0SizeUnits">%</variable> <variable name="OSDPartitions0VolumeLetterVariable" property="Partitions0VolumeLetterVariable">OSDisk</variable>
    <variable name="OSDPartitions" property="Partitions">1</variable> <variable name="OSDPartitionStyle" property="PartitionStyle">MBR</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIDiskpart.wsf"</action>
    </step> -<step description="You can change the size of the partition(s) in the \Scripts\WinRE\DiskConfig.txt file. Make sure your partition is large enough to hold the recovery image if you install alot of software. Current configuration is 160GB
    for recovery, 60 for OS, 10 for scratch" name="Format and Partition Disk [Custom]" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable
    name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
    property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010 BETA\Configure-HDD.cmd"</action> </step> -<step
    description="" name="Copy scripts" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\LTICopyScripts.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> </step> </group> -<step description="" name="Configure" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIConfigure.wsf"</action> -<defaultVarList>
    <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
    <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Inject Drivers" continueOnError="false" disable="false" successCodeList="0 3010" type="BDD_InjectDrivers"
    runIn="WinPEandFullOS"> -<defaultVarList> <variable name="DriverSelectionProfile" property="DriverSelectionProfile">Dell OptiPlex 790</variable> <variable name="DriverInjectionMode" property="DriverInjectionMode">ALL</variable>
    </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIDrivers.wsf"</action> </step> -<step description="" name="Apply Patches" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="BDD_InstallUpdatesOffline">
    <action>cscript.exe "%SCRIPTROOT%\ZTIPatches.wsf"</action> -<defaultVarList> <variable name="PackageSelectionProfile" property="PackageSelectionProfile">All Packages</variable> </defaultVarList> </step> -<step description=""
    name="Next Phase" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> </step> </group> -<group description="" name="Install" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable
    name="Variable">PHASE</variable> <variable name="Operator">equals</variable> <variable name="Value">INSTALL</variable> </expression> </condition> -<step description="" name="[Custom] Apply D Wim " continueOnError="false"
    disable="true" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\DWim.exe"</action> </step> -<step description="" name="Install Operating System" continueOnError="false" disable="false" successCodeList="0 3010" type="BDD_InstallOS" runIn="WinPEandFullOS">
    -<defaultVarList> <variable name="OSGUID" property="OSGUID">{52bb4035-96e5-46f3-9d17-3d2a363895c3}</variable> <variable name="DestinationDisk" property="DestinationDisk">0</variable> <variable name="DestinationPartition" property="DestinationPartition">2</variable>
    <variable name="DestinationOSDriveLetter" property="DestinationOSDriveLetter"/> <variable name="DestinationOSVariable" property="DestinationOSVariable">OSDisk</variable> <variable name="DestinationOSRefresh" property="DestinationOSRefresh"/>
    <variable name="DestinationOSInstallType" property="DestinationOSInstallType">ByDiskPartition</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\LTIApply.wsf"</action> </step> -<step description="" name="Restart
    computer" continueOnError="false" disable="false" successCodeList="0 3010" type="SMS_TaskSequence_RebootAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="SMSRebootMessage" property="Message"/> <variable name="SMSRebootTimeout"
    property="MessageTimeout">60</variable> <variable name="SMSRebootTarget" property="Target"/> </defaultVarList> <action>smsboot.exe /target:WinPE</action> </step> -<step description="" name="Next Phase" continueOnError="false"
    disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
    property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step>
    </group> -<group description="" name="Postinstall" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">PHASE</variable>
    <variable name="Operator">equals</variable> <variable name="Value">POSTINSTALL</variable> </expression> </condition> -<step description="" name="Copy Scripts" continueOnError="false" disable="true" startIn="" successCodeList="0
    3010"> <action>cscript.exe "%SCRIPTROOT%\LTICopyScripts.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/>
    <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Configure"
    continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIConfigure.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable
    name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> </step> -<step description="Applies the D: wim to System " name="Apply Scratch Drive" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS">
    -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable
    name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"\\thinix-dev1\navyImage$\Tools\x86\imagex.exe" /apply
    "\\thinix-dev1\navyImage$\Operating Systems\navycnic-gen_20131226100000\navycnic-gen_20131226100000_ddrive.wim" 1 D:\</action> </step> -<step description="" name="Inject Drivers" continueOnError="false" disable="false" startIn="" successCodeList="0
    3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIdrivers.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/>
    <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<group description="" name="Custom
    Tasks" expand="true" continueOnError="false" disable="false"> -<step description="Makes sure there is no Boot Config files on C drive and changes them to R drive:" name="Recovery Partition" continueOnError="false" disable="false" startIn="" successCodeList="0
    3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
    property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\Re-assign
    DriveLetter.cmd"</action> </step> -<step description="" name="[Custom] Apply D Wim " continueOnError="false" disable="true" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList>
    <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
    property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\DWim.exe"</action> </step> -<step description=""
    name="[Custom] TDRBCD" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable
    name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
    <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\TDRBCD.exe"</action> </step> -<step description="" name="[Custom] Apply D Wim " continueOnError="false"
    disable="true" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\DWim.exe"</action> </step> </group> -<step description="" name="Next Phase" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe
    "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
    property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Set Phase" continueOnError="false" disable="false" successCodeList="0
    3010" type="SMS_TaskSequence_SetVariableAction"> -<defaultVarList> <variable name="VariableName" property="VariableName">PHASE</variable> <variable name="VariableValue" property="VariableValue">STATERESTORE</variable> </defaultVarList>
    <action>cscript.exe "%SCRIPTROOT%\ZTISetVariable.wsf"</action> </step> </group> -<group description="" name="State Restore" expand="false" continueOnError="false" disable="true"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression">
    <variable name="Variable">PHASE</variable> <variable name="Operator">equals</variable> <variable name="Value">STATERESTORE</variable> </expression> </condition> -<step description="" name="Gather local only"
    continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="BDD_Gather"> -<defaultVarList> <variable name="GatherLocalOnly" property="GatherLocalOnly">true</variable> <variable name="RulesFile" property="RulesFile"/>
    </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIGather.wsf"</action> </step> -<step description="" name="Post-Apply Cleanup" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe
    "%SCRIPTROOT%\LTIApply.wsf" /post</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
    property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Recover From Domain " continueOnError="false" disable="false"
    successCodeList="0 3010" type="BDD_RecoverDomainJoin" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="DomainErrorRecovery" property="DomainErrorRecovery">Auto</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIDomainJoin.wsf"
    </action> </step> -<step description="" name="Tattoo" continueOnError="true" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTITatoo.wsf"</action> -<defaultVarList> <variable name="RunAsUser"
    property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile"
    property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Opt In to CEIP and WER" continueOnError="true" disable="true" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIOptIn.wsf"
    /CEIP:YES /WER:YES</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
    property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Windows Update (Pre-Application Installation)" continueOnError="true"
    disable="true" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIWindowsUpdate.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
    property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step>
    -<step description="" name="Install Applications" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="BDD_InstallApplication"> <action>cscript.exe "%SCRIPTROOT%\ZTIApplications.wsf"</action> -<defaultVarList>
    <variable name="ApplicationGUID" property="ApplicationGUID"/> <variable name="ApplicationSuccessCodes" property="ApplicationSuccessCodes">0 3010</variable> </defaultVarList> </step> -<step description="" name="Windows Update
    (Post-Application Installation)" continueOnError="true" disable="true" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIWindowsUpdate.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> </step> <group description="" name="Custom Tasks" expand="true" continueOnError="false" disable="false"/> -<step description="" name="Enable BitLocker" continueOnError="true" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_EnableBitLockerAction">
    <action>cscript.exe "%SCRIPTROOT%\ZTIBde.wsf"</action> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">BdeInstallSuppress</variable> <variable name="Operator">notEquals</variable>
    <variable name="Value">YES</variable> </expression> </condition> -<defaultVarList> <variable name="OSDBitLockerTargetDrive" property="BdeTargetDriveLetter"/> <variable name="OSDBitLockerMode" property="BdeInstall">TPM</variable>
    <variable name="OSDBitLockerStartupKeyDrive" property="BdeKeyLocation"/> <variable name="OSDBitLockerCreateRecoveryPassword" property="BdeRecoveryPassword">AD</variable> <variable name="OSDBitLockerWaitForEncryption" property="WaitForEncryption">false</variable>
    </defaultVarList> </step> -<step description="" name="Restore User State" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIUserState.wsf" /restore</action> -<defaultVarList>
    <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
    <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Restore Groups" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe
    "%SCRIPTROOT%\ZTIGroups.wsf" /restore</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable
    name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Apply Local GPO Package"
    continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIApplyGPOPack.wsf"</action> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable
    name="Variable">ApplyGPOPack</variable> <variable name="Operator">notEquals</variable> <variable name="Value">NO</variable> </expression> </condition> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> </step> -<group description="" name="Imaging" expand="false" continueOnError="false" disable="false"> <action/> -<group description="" name="Prepare Only" expand="false" continueOnError="false" disable="false">
    -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">DoCapture</variable> <variable name="Operator">equals</variable> <variable name="Value">PREPARE</variable>
    </expression> </condition> -<step description="" name="Copy Sysprep files" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\LTISysprep.wsf"</action> -<defaultVarList>
    <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
    <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> </group> -<group description="" name="Sysprep Only" expand="false" continueOnError="false" disable="false"> -<condition>
    -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">DoCapture</variable> <variable name="Operator">equals</variable> <variable name="Value">SYSPREP</variable> </expression>
    </condition> -<step description="" name="Add mass storage drivers to sysprep.inf for XP and 2003" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIDrivers.wsf"</action>
    -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
    <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Execute Sysprep" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe
    "%SCRIPTROOT%\LTISysprep.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
    property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> </group> -<group description="" name="Capture Image" expand="false" continueOnError="false"
    disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">DoCapture</variable> <variable name="Operator">equals</variable> <variable name="Value">YES</variable>
    </expression> </condition> -<step description="" name="Apply Windows PE" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\LTIApply.wsf" /PE /STAGE</action> -<defaultVarList>
    <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
    <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Add mass storage drivers to sysprep.inf for XP and 2003" continueOnError="false" disable="false" startIn=""
    successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIDrivers.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/>
    <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Execute
    Sysprep" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\LTISysprep.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
    <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
    </defaultVarList> </step> -<step description="" name="Apply Windows PE (BCD)" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%_SMSTSMDataPath%\Scripts\LTIApply.wsf" /PE /BCD</action>
    -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">ImageBuild</variable> <variable name="Operator">greaterEqual</variable> <variable name="Value">6</variable>
    </expression> </condition> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
    property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Restart computer" continueOnError="false" disable="false"
    successCodeList="0 3010" type="SMS_TaskSequence_RebootAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="Message" property="Message"/> <variable name="MessageTimeout" property="MessageTimeout">60</variable> <variable
    name="Target" property="Target"/> </defaultVarList> <action>smsboot.exe /target:WinPE</action> </step> -<step description="" name="Gather local only" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"
    type="BDD_Gather"> -<defaultVarList> <variable name="GatherLocalOnly" property="GatherLocalOnly">true</variable> <variable name="RulesFile" property="RulesFile"/> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIGather.wsf"</action>
    </step> -<step description="" name="Create WIM" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIBackup.wsf"</action> -<defaultVarList> <variable name="RunAsUser"
    property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile"
    property="LoadProfile">false</variable> </defaultVarList> </step> </group> </group> </group> </sequence>

  • CMS database move from Lync 2010 to 2013 went well but.....

    Something odd when I was done. Everything went perfectly. No errors at all and went as expected. I noticed though after everything was done and I had not yet uninstalled the CMS from Lync 2010 that two services on the Lync 2010 were stopped but in an Automatic
    startup state. They are the "Lync Server File Transfer Agent' and the "Lync Server Master Replicator Agent'. Thought it was odd they were both stopped. I am sure it had something to do with the CMS move and all the scripting that goes on. The rest
    of the Lync services are running.
    I am thinking though if they were supposed to be stopped, why not disable them. Why leave them at Automatic. I am not seeing any errors or warnings at all on the Lync 2010 or 2013 servers. Application, System and Lync Server logs are clean. Everything appears
    to be OK.
    Thing that concerns me though is when I run the Get-CsManagementStoreReplicationStatus on the 2013 FE, the databases all come back looking good with UpToDate = True but the last replication was last night (about 8-9 hours ago) shortly after I completed the
    procedure.
    I want to just uninstall the CMS on Lync 2010 which is the last step but I want to make sure everything is OK before I do. Not sure if I should start those services. I never rebooted the 2010 server after moving the CMS. Seems if I did, those services would
    have tried to start. Very confused here.
    Wanted to add also that I have both the above services on the 2013 FE server and they are both running. And, when I run Get-CsManagementStoreReplicationStatus -CentralManagementStoreStatus on my Lync 2013 FE, it says it is the active master and active file
    transfer agent so maybe that is why the services are stopped? If so, what if I had rebooted the 2010 server. Those services would have tried to start because they are set to Automatic.
    I guess the real question here is how often should the Lync servers being updating their replicas with each other. We have a very small environment right now with only a few hundred users.

    This process of transferring information updates from master to replica is called replication. The replication process consists of copying information between directories from the master to the replicas, applying the changes received to the
    replica and report status back to the master.
    The MASTER generates the data package containing new changes to CMS and stores a copy in each to-replica directory for every replica.
    The data package must be copied to all replicas. All Lync Server 2013 servers, except the Edge Server, uses the Windows file copy SMB protocol mechanism to push the data package from the CMS master to the replica.
    For Edge servers, since Edge servers is not a member of domain, the file copy is performed over an HTTPS channel. The Edge Server runs a Web Service on the port specified for the ManagementServices in the topology document. The default port is 4443. Even
    you Move CMS store and CMS Master service from 2010 to 2013, the replication is a logical concept so you can replicate CMS information with the help of Lync server 2013 CMS master service.
    You can refer to the link below, it is for Lync server 2010 but similar for Lync server 2013:
    https://blogs.technet.com/b/jenstr/archive/2010/10/13/what-is-central-management-store-cms.aspx
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Migrate data from DPM 2010 to DPM 2012

    Hello.
    I am currently using DPM 2010. I want to move to DPM 2012, but not as an upgrade. I am using a 20 TB storage pool for nightly backups and tape for weekly backups. The goal of the upgrade is to upgrade the OS as well as DPM, so this will be a fresh installation,
    not an in place upgrade. Is there a way to get the recovery point information for tapes and the storage pool migrated into DPM 2012 from DPM 2010?

    This topic is closer to system center forum and even there the answer is well beyond the scope. I would recommend
    1. MS System Center Guides
    2. Survival guides
    http://social.technet.microsoft.com/wiki/contents/articles/7075.system-center-2012-configuration-manager-survival-guide.aspx
    http://social.technet.microsoft.com/wiki/contents/articles/11414.system-center-2012-orchestrator-survival-guide.aspx
    http://social.technet.microsoft.com/wiki/contents/articles/11417.system-center-2012-endpoint-protection-survival-guide.aspx
    http://social.technet.microsoft.com/wiki/contents/articles/8113.system-center-2012-service-manager-survival-guide.aspx
    http://social.technet.microsoft.com/wiki/contents/articles/7809.system-center-2012-operations-manager-survival-guide.aspx
    http://social.technet.microsoft.com/wiki/contents/articles/11867.system-center-2012-data-protection-manager-survival-guide.aspx
    http://social.technet.microsoft.com/wiki/contents/articles/11415.system-center-2012-app-controller-survival-guide.aspx
    3. Book from Packt Publishing
    http://www.packtpub.com/microsoft-system-center-data-protection-manager-2012-with-service-pack-1/book
    Make experiments on test system before doing changes in production environment.
    Regards
    Milos

  • Migrate UM from Exchange 2010 to Exchange 2013

    I have been running Exchange UM since Exchange 2007, using the ps1 script to move all my Auto Attendants into the 2010 environment. I'm at a loss on how to efficiently do this in moving from Ex2010 to Ex2013, though. I've read
    http://technet.microsoft.com/en-us/library/dn169226 and it's Step 3 that's got me bewildered. I have 44 Auto Attendants, most of which with up to five custom greetings, numerous key mappings,
    etc. That Step 3 indicates having to move each custom greeting individually.
    I'm just getting into PowerShell and struggling as-is. Compounding that floundering with the lack of clear documentation on moving custom greetings en mass has me frustrated. Any assistance would be greatly appreciated. Thank you.

    Hi David,
    Before we migrate all the users to
    2013, we would recommend you to test voice mail on
    2013 server.
    Here are the steps we need to follow
    to test VM on 2013 server:
    1. Create a certificate for both Unified Messaging service and the Call Router services. Here is an article on how
    to create certificates , http://technet.microsoft.com/en-us/library/dn205141(v=exchg.150).aspx
    2. Create new dial plan in Exchange
    2013. Here is an article on how to create a dial plan, http://technet.microsoft.com/en-us/library/bb123819(v=exchg.150).aspx
    3. Run scripts on both Exchange and Lync servers.
    4. Create test user and enable the user for both Lync and Exchange.
    5. Enable newly created user for UM and test voicemail for that user.
    Additionally here is a link which has checklist to upgrade
    from Exchange 2010UM
    to 2013UM http://technet.microsoft.com/en-us/library/dn169228(v=exchg.150).aspx
    Thanks,
    James

  • Migration from OL 2010 to 2013

    Does anyone have an instruction on how to migrate email accounts (several POP, & IMAP accounts) from one computer running Window 7 and Outlook 2010 to a new computer with Windows 8.1 and Outlook 2013?
    /PS. Please note that it's not just the .pst files that needs to be moved...

    In order to migrate the PST files you’ll need to use a custom XML override. Here is a sample that will gather all PST files from all fixed drives:
    <?xml version="1.0" encoding="utf-8" ?>
    <migration urlid="http://www.microsoft.com/migration/1.0/migxmlext/pst">
    <component type="Documents" context="UserAndSystem">
    <displayName>All PST migrated from all fixed drives, regardless of location</displayName>
    <role role="Data">
    <rules>
    <include>
    <objectSet>
    <script>MigXmlHelper.GenerateDrivePatterns ("* [*.pst]", "Fixed")</script>
    </objectSet>
    </include>
    </rules>
    </role>
    </component>
    </migration>
    Paste that into Notepad and save as PST.XML into your USMT folder. When you add that to your scanstate and loadstate command-lines with /i:pst.xml then
    all fixed drive PST files will be migrated.
    For more information, please refer to the following Microsoft TechNet blog:
    USMT, OST, and PST
    http://blogs.technet.com/b/askds/archive/2010/02/11/usmt-ost-and-pst.aspx
    You may also move the .pst files without USMT by following the steps the following Microsoft KB article provided:
    How to move your personal folders (.pst) file in Outlook
    http://support.microsoft.com/kb/291636
    Ref: http://social.technet.microsoft.com/Forums/en-US/4ccc7d2d-2b15-4e93-a761-e6b210ca0101/using-usmt-to-migrate-users-profile-and-noticed-that-pst-files-stored-on-the-network-are-migrated?forum=winservergen
    Exchange Queries

Maybe you are looking for

  • Logical Database PNPCE and macro RP_SEL_EIN_AUS_INIT

    Hi there, The macro above mentioned should give me only the persons wich are active (employment status <> 0). The problem is, that when i set the reporting period to 01.01.2004 to 31.12.2004 and the field employment status <> 0, i also get a person w

  • F110 run the payment run directly without running the proposal run first

    Hello to you all, Does any one know I do I block the option to run the payment run directly without running the proposal run first? Thanks in advance, Yoav

  • Trouble with windows starter 7!!!

    hellooo!! I got windows starter 7 on my samsung and I cannot run itunes on it . what should I do?

  • logic:equal  ...    &&  bean:write ...       problem

    <bean:define id="statusNew" value="8500" type="java.lang.String"/>           <logic:iterate id="columnValue" name="dataRows" indexId="colIndex">                     <logic:equal name="colIndex" value="0">                     <TD width="2%" align="lef

  • Data Integrator treating VARCHAR like LONG

    Data Integerator 11.7 If I map two or more fields from a source table to a target Oracle table, I get the ORA-01461 error, where it thinks I am dealing with LONG columns, when they are VARCHAR2(1200). It works for just one VARCHAR2(1200).