Migrating windows 2003 standard edition to windows 2008 enterprise edition
Hi
We are using ECC 5.0 and our PRD system is running on windows 2003 standard edition,and recently we have got some physical memory problem.as windows 2003 standard edition supports only 4 GB of RAM. and we want to extend our RAM for that we are planning to upgrade os to windows 2008 enterprise edition,is that possible.and after upgrading OS what are the activities that need to be performed for SAP to run succesfully,kindly suggest.
Regards
Pranav
Hi Markus
I read note SAP Note 690432 - Windows 2003 Support in it regarding upgradation of os windows 2003 standard edition to windows 2003 enterprise edition.
Upgrade of Your Operating System
If you upgrade an existing SAP system to Windows Server 2003 perform the
following actions:
o Install the latest R3DLLINS
You find the latest dynamic link libraries R3DLLINS for Windows
Server 2003 on the EXT-Kernel CD in the NTPATCH directory.
o Replace the R/3 kernel with the EXT-Kernel.
If you do not replace it you will get error "SICK" after the first
logon attempt after the start.
In this case, download the disp+work package(s) from the SAP
Service Marketplace at service.sap.com/patches and unpack the
patch(es) to directory usr\sap\exe:
dw*_<patch-level>
Use at least patch level 186.
o Use the latest saposcol version.
This version supports the changed performance counter of Windows
Server 2003 to determine values for ST06 and RZ20.
You can find the latest version in file saposcol_<Patch Level>.CAR.
in the SAP Service Marketplace.
o SAP DB only: See SAP Note 315237.o Compatibility of the Hardware with Windows Server 2003
You can perform the upgrade to Windows Server 2003 only if the
hardware has been explicitly released for this purpose. To check,
do one of the following:
- If the Windows Server 2003 CD is available, check compatibility
with WINNT32.EXE in the \I386 directory. The exact statement
is: <DRIVE:>\I386\WINNT32 /CHECKUPGRADEONLY. The result is
stored as text file WINNT32.LOC in the present Windows
directory (e.g. C:\WINNT).
- The hardware has successfully passed SAP hardware certification
(http://www.addon.de).
- The hardware is contained in the Microsoft Hardware
Compatibility List (http://www.microsoft.com/hcl).
- The hardware has been released for Windows Server 2003 by the
manufacturer. This information is published on the
corresponding website.
o Kerberos Single Sign-On
When the SAP system is installed on Windows Server 2003 you can
setup the Kerberos Single Sign-On. If you use the kerberos protocol
the information exchanged between the SAP frontend and the
application server for authentication is encrypted.
The procedure for setting up Single Sign-On is described in all
recent installation guides which you can download from the SAP
Service Marketplace at: service.sap.com/instguides.
o SAP domain under Windows Server 2003
Follow the instructions of the Windows documentation for the
migration of a Windows NT 4 domain to Windows 2003. For the SAP
environment some additional points need to be observed.
For Windows NT 4 there are two models for the SAP system domain:
- Single domain
All users and the SAP system build one single domain. This
domain can be migrated to Windows Server 2003 and exist there
as single domain.
- Additional domain
There is one domain for the users and a second domain for the
SAP system(s). For a migration to Windows Server 2003 the SAP
system domain has to be created as child domain under the user
domain. A "Top-down" procedure is to be used. The higher domain
(the user domain) must be migrated prior to the SAP child
domain. If the user and SAP domain is part of a larger domain
structure the complete domain structure for Windows Server 2003
needs to be planned in a preparing phase. Usually, the
structure created under Windows NT 4 has to be re-arranged and
consolidated.
The name space of the root domain and all sub-ordinated domains
has to be defined and the distribution of the DNS services
needs to be determined.
Note the following:
The SAP domain has to be created as child domain.
The SAP domain must not be converted into an organizational
unit (OU). OUs are not supported by R3SETUP and R3up.
in it nowhere it is mentioned about system copy so plz suggest.
Similar Messages
-
Windows 2003 Standard Edition (Cluster Configuration Storage page)
I am trying to install RAC R2 on windows Server 2003 (Standard Edition). I am using FireWire 800 SIIG to connect to Maxtor OneTouch III External HDD.
When installing cluster Services, i do not see the Cluster Storage Devices. When i go to Computer Management, i see all the partitions of the raw device.
One "Cluster Configuration Storage" page, the Available Disks show no partitions.
Oracle installtion documentation says "On the Cluster Configuration Storage page, identify the disks that you want to use for the Oracle Clusterware files and, optionally, Oracle Cluster File System (OCFS) storage. Highlight each of these disks one at a time and click Edit to open the Specify Disk Configuration page where you define the details for the selected disk"
In my case, i do not see any disks. What am i missing?
Any Thoughts. Please advise
Thanks
-Prasad
Message was edited by:
pinjamYou have a more fundamental problem, Firewire disks will not work for RAC on Windows. The storage needs to be shared, Firewire disks can't be shared on Windows. On Linux, Oracle took the open source firewire driver and modified it to allow more than one host to connect. On Windows the driver is closed source so they can't do that.
I presume you are wanting to try-out RAC on Windows, If so another solution may be to download one of the many iSCSI Servers that are available. Microsoft ship an iSCSI Initiator for Windows, this allows you to share a 'block device' which is what RAC needs - then you can choose your RAC Database storage method of choice, ASM, OCFS, RAW. I prefer ASM -
Is there a limit for SGA_MAX_SIZE on windows Server 2003 Standard Edition
I have a 9.2.0.8 Standard Edition running on windows Server 2003 Standard Edition. I cannot set SGA_MAX_SIZE to more than 1.7G. I have total of 3G RAM on that machine.
In order to use memory over 4 GB the /PAE flag must be set and Oracle must be tuned
accordingly. As mentioned above, for using memory over 4 GB and less than 16 GB, the
/3GB flag can be set as well. Oracle uses memory above 4 GB by taking advantage of
the AWE (Address Windowing Extension) feature built into Windows 2000, Windows
2003 and Windows XP.
In order to use this memory, the Oracle administrator account (either LocalSystem or the
domain user that installed Oracle) must have the “Lock memory pages” privilege set. In
addition the AWE_WINDOW_MEMORY parameter must also be created and set. This
parameter specifies how much of the 3 GB virtual memory space allocated to Oracle
should be used for mapping database buffers. The default value of 1GB should be
sufficient and increasing this value could be detrimental, since you only have 3 GB of
virtual memory to use. The higher the value of AWE_WINDOW_MEMORY that you
have set, the more likely it is that you will experience user memory issues. Start with the
default value of 1 GB and tune upwards only if you need to.
Once these steps have been completed, larger memory can be set by configuring
DB_BLOCK_SIZE and DB_BLOCK_BUFFERS initialization parameters. When using
Very Large Memory (VLM) you should use DB_BLOCK_BUFFERS rather than
DB_CACHE_SIZE in order to configure memory. -
PC Netlink 2.0 and Windows 2003 Standard Edition
Does anyone know if a Windows 2003 Standard Edition Server can be added as a Domain Member Server to a PC Netlink 2.0 domain?
When I try to join the domain I receive the message;
"The following error occurred attempting to join the domain "DomainName":<br />
<br />
The remote procedure call failed and did not execute."
Thanks
PeterI have the same Problem; no solution yet.
Accroding to Sun Support Doc # 72542.
PC Netlink is based on NT 4.0 Server.
At the highest level it implements NT 4.0 protocols.
.NET clients, such as Windows 2003, implement a different protocol. -
Oracle Failsafe + 11G + Windows 2008 Enterprise r2 64bits
Dear Friends,
I need to install a Oracle Fail Safe system on Windows 2008 Enterprise r2 using Oracle 11g, I have some question about this:
1-Can be installed Oracle FailSafe on a Oracle standard edition? or is complete necessary use Oracle Enterprise Edition? 11G.
2-There is a version for 64bits system of the Oracle FailSafe?
2-Failsafe and failsafe manager works under Windows 2008 Enterprise r2 64bits?
Thanks for all the answer.1-Can be installed Oracle FailSafe on a Oracle standard edition? or is complete necessary use Oracle Enterprise Edition? 11G.Oracle Fail Safe environment recommends installing database software on a two-node cluster, so it is possible with 11G
2-There is a version for 64bits system of the Oracle FailSafe? 3-Failsafe and failsafe manager works under Windows 2008 Enterprise r2 64bits?Other two answers are given in the pdf at http://download.oracle.com/docs/cd/E10736_01/doc/relnotes.341/e10719.pdf. you must go through it thoroughly. -
Hello,
I installed SDK1.3.1 update 16 on a computer with the operating system Microsoft Server 2003, Standard Edition.
The JAVA_HOME variable was NOT automatically created as part of the installation. So I created it myself.
I installed a voice recognition browser afterwards (that requires JDK1.3.1 update 06 or later) and it could not detect that the appropriate JDK had been installed and/or the JAVA_HOME variable had been set correctly.
Is it normal for the JAVA_HOME variable to not be created automatically? If this is not normal, what could be the problem and how can I rectify it? Again I need a version of JDK 1.3.1 for the browser to work.
Thanks,
BonnieHi Bonnie
Maybe a bit late to comment, but for the record...
I just tried to install JDK1.3.1 on a Windows Server 2003 Standard Edition SP1 (version 5.2.3790) server.
I initially tried to install 1.3.1_13, but java -version failed quietly with following error in eventvwr logs:
Faulting application java.exe, version 0.0.0.0, faulting module jvm.dll, version 0.0.0.0, fault address 0x000bc1f8.
The application, C:\jdk1.3.1_13\jre\bin\java.exe, generated an application error The error occurred on 03/30/2006 @ 08:47:35.425 The exception generated was c0000005 at address 6D4DC1F8 (jvm!gHotSpotVMIntConstantEntryValueOffset)I tried uninstalling and reinstalling JDK from Add|Remove Programs, but without success.
I then tried 1.3.1_8 and it worked fine first time.
I then tried 1.3.1_12 and it failed with this eventvwr message
Faulting application java.exe, version 0.0.0.0, faulting module jvm.dll, version 0.0.0.0, fault address 0x000bc1f8.
The exception generated was c0000005 at address 6D4DC1F8 (jvm!gHotSpotVMIntConstantEntryValueOffset)The 1.3.1 documentation that I've read doesn't explicitly mention support for Server 2003.
In contrast, 1.4 explicitly supports Server 2003.
Regards
Matthew -
Windows 2008 Enterprise 32-bit Random Blue Screen 0x000000C4
Hello,
We have a customer with IBM x3500 M3 server, Windows 2008 Enterprise SP2 32-bit, 24GB RAM (Domain, file and print server, rdp server roles installed).
Since December 2013, they have been experiencing random reboots (once or twice a month), so I ran debug on the memory.dmp and found that ntkrpamp.exe wa scausing this issue:
Debug on memory.dmp file for January, 2014:
Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Debug\MEMORY.DMP]
Kernel Summary Dump File: Only kernel address space is available
Symbol search path is: srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: C:\Win2008E.DVD
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (12 procs) Free x86 compatible
Product: LanManNt, suite: Enterprise TerminalServer
Built by: 6002.18881.x86fre.vistasp2_gdr.130707-1535
Machine Name:
Kernel base = 0x82233000 PsLoadedModuleList = 0x8234ac70
Debug session time: Wed Jan 8 08:24:19.852 2014 (UTC - 5:00)
System Uptime: 4 days 0:37:56.528
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis
Use !analyze -v to get detailed debugging information.
BugCheck 50, {f85c5048, 0, 823af2bf, 0}
Probably caused by : ntkrpamp.exe ( nt!CmpCheckKey+61b )
Followup: MachineOwner
9: kd> !analyze -v
* Bugcheck Analysis
PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: f85c5048, memory referenced.
Arg2: 00000000, value 0 = read operation, 1 = write operation.
Arg3: 823af2bf, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 00000000, (reserved)
Debugging Details:
READ_ADDRESS: f85c5048
FAULTING_IP:
nt!CmpCheckKey+61b
823af2bf 394724 cmp dword ptr [edi+24h],eax
MM_INTERNAL_CODE: 0
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: System
CURRENT_IRQL: 0
TRAP_FRAME: 97b7d9ec -- (.trap 0xffffffff97b7d9ec)
ErrCode = 00000000
eax=00000000 ebx=e6b30024 ecx=19ef8172 edx=00000035 esi=a559e6a8 edi=f85c5024
eip=823af2bf esp=97b7da60 ebp=97b7da8c iopl=0 nv up ei pl zr na pe nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010246
nt!CmpCheckKey+0x61b:
823af2bf 394724 cmp dword ptr [edi+24h],eax ds:0023:f85c5048=????????
Resetting default scope
LAST_CONTROL_TRANSFER: from 82280de4 to 822cb292
STACK_TEXT:
97b7d9d4 82280de4 00000000 f85c5048 00000000 nt!MmAccessFault+0x10b
97b7d9d4 823af2bf 00000000 f85c5048 00000000 nt!KiTrap0E+0xdc
97b7da8c 823b581a 01000001 009c4020 009c3f70 nt!CmpCheckKey+0x61b
97b7dabc 823b5e48 a559e6a8 01000001 00000006 nt!CmpCheckRegistry2+0x8c
97b7db04 823b086e 01000001 97b7dc60 8000a05c nt!CmCheckRegistry+0xf5
97b7db60 823b2fdd 97b7dbb4 00000005 00000000 nt!CmpInitializeHive+0x4c1
97b7dbd8 823b527d 97b7dc60 00000000 97b7dc4c nt!CmpInitHiveFromFile+0x19e
97b7dc18 823ab4c5 97b7dc60 00000000 97b7dc7b nt!CmpCmdHiveOpen+0x36
97b7dd14 823ab6fa 00000002 8232b5a0 00000002 nt!CmpFlushBackupHive+0x2fd
97b7dd38 8248acbd 8233513c 8e9462d8 822d8d4a nt!CmpSyncBackupHives+0x90
97b7dd44 822d8d4a 00000000 00000000 8e9462d8 nt!CmpPeriodicBackupFlushWorker+0x32
97b7dd7c 8240901c 00000000 8e585cb2 00000000 nt!ExpWorkerThread+0xfd
97b7ddc0 82271eee 822d8c4d 00000001 00000000 nt!PspSystemThreadStartup+0x9d
00000000 00000000 00000000 00000000 00000000 nt!KiThreadStartup+0x16
STACK_COMMAND: kb
FOLLOWUP_IP:
nt!CmpCheckKey+61b
823af2bf 394724 cmp dword ptr [edi+24h],eax
SYMBOL_STACK_INDEX: 2
SYMBOL_NAME: nt!CmpCheckKey+61b
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrpamp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 51da1840
FAILURE_BUCKET_ID: 0x50_nt!CmpCheckKey+61b
BUCKET_ID: 0x50_nt!CmpCheckKey+61b
Followup: MachineOwner
Based on google searches, driver verifier was recommended to be turned on to track driver with fault. I enabled verifier on all drivers, disabled automatic server reboot and today server crashed again.
here's the debug output of full memory.dmp file:
Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\windows\memory.dmp]
Kernel Summary Dump File: Only kernel address space is available
Symbol search path is: srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: C:\Win2008E.DVD
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (12 procs) Free x86 compatible
Product: LanManNt, suite: Enterprise TerminalServer
Built by: 6002.18881.x86fre.vistasp2_gdr.130707-1535
Machine Name:
Kernel base = 0x82214000 PsLoadedModuleList = 0x8232bc70
Debug session time: Thu Feb 13 08:29:07.272 2014 (UTC - 5:00)
System Uptime: 3 days 23:15:45.259
Loading Kernel Symbols
Loading User Symbols
PEB is paged out (Peb.Ldr = 7ffdd00c). Type ".hh dbgerr001" for details
Loading unloaded module list
* Bugcheck Analysis
Use !analyze -v to get detailed debugging information.
BugCheck C4, {e2, af033d18, 2d0000, 0}
Page 6684ef not present in the dump file. Type ".hh dbgerr004" for details
Page 66a0f9 not present in the dump file. Type ".hh dbgerr004" for details
Probably caused by : srvnet.sys ( srvnet!SrvNetWskSendData+c9 )
Followup: MachineOwner
9: kd> !analyze -v
* Bugcheck Analysis
DRIVER_VERIFIER_DETECTED_VIOLATION (c4)
A device driver attempting to corrupt the system has been caught. This is
because the driver was specified in the registry as being suspect (by the
administrator) and the kernel has enabled substantial checking of this driver.
If the driver attempts to corrupt the system, bugchecks 0xC4, 0xC1 and 0xA will
be among the most commonly seen crashes.
Arguments:
Arg1: 000000e2, IRP field is a user-mode address but Irp->RequestorMode is KernelMode.
Arg2: af033d18, IRP address.
Arg3: 002d0000, User-mode address present as the value of an IRP field.
Arg4: 00000000
Debugging Details:
Page 6684ef not present in the dump file. Type ".hh dbgerr004" for details
Page 66a0f9 not present in the dump file. Type ".hh dbgerr004" for details
BUGCHECK_STR: 0xc4_e2
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: spoolsv.exe
CURRENT_IRQL: 2
LAST_CONTROL_TRANSFER: from 824ff5a7 to 822e19bd
STACK_TEXT:
eff67a20 824ff5a7 000000c4 000000e2 af033d18 nt!KeBugCheckEx+0x1e
eff67a40 824fea32 af033d18 002d0000 9930e2e0 nt!VerifierBugCheckIfAppropriate+0x32
eff67a58 824fe7e0 af033d18 9930e2e0 99269b80 nt!ViIrpCheckKernelAddressForIrp+0x51
eff67a70 824f766d 99269b80 af033458 99269b80 nt!VfBeforeCallDriver+0x3d
eff67a90 82258931 af033fa4 af033fe0 99269b80 nt!IovCallDriver+0x1ef
eff67aa4 9b01271a eff67adc aad3183f bd99d34c nt!IofCallDriver+0x1b
eff67aac aad3183f bd99d34c eff67ad0 00000002 afd!WskProAPISend+0x67
eff67adc aad31490 9b01d9d0 af033d18 af033458 srvnet!SrvNetWskSendData+0xc9
eff67afc aad779d2 d5b93018 af033458 00000030 srvnet!SrvNetSendData+0x4d
eff67b14 aadb45bd af033368 aad75459 af033d18 srv!SrvStartSend2+0xa3
eff67b40 aad7522d af033fa4 eff67b84 824f7d4d srv!SrvFsdRestartReadAndX+0x127
eff67b4c 824f7d4d 00000000 af033d18 af033368 srv!SrvFsdIoCompletionRoutine+0x1d
eff67b84 822bb0fb 00000000 af033d18 eff67bf0 nt!IovpLocalCompletionRoutine+0x16e
eff67bb8 824f7b95 824f7a77 ccb4e7c8 eff67c44 nt!IopfCompleteRequest+0x11d
eff67c28 981a30d9 c3fbc2d8 ccb4e7c8 909c9dd0 nt!IovCompleteRequest+0x11c
eff67c4c 824f76be 909c9dd0 ccb4e7c8 9efe80e8 Npfs!NpFsdWrite+0x53
eff67c70 82258931 ccb4e838 ccb4e7c8 909c9dd0 nt!IovCallDriver+0x23f
eff67c84 8245ae25 9efe8114 ccb4e7c8 ccb4e838 nt!IofCallDriver+0x1b
eff67ca4 82427b13 909c9dd0 9efe80e8 00000001 nt!IopSynchronousServiceTail+0x1d9
eff67d38 8225ec96 909c9dd0 00000a39 00000000 nt!NtWriteFile+0x6fc
eff67d38 77755d14 909c9dd0 00000a39 00000000 nt!KiSystemServicePostCall
WARNING: Frame IP not in any known module. Following frames may be wrong.
0549f880 00000000 00000000 00000000 00000000 0x77755d14
STACK_COMMAND: kb
FOLLOWUP_IP:
srvnet!SrvNetWskSendData+c9
aad3183f 53 push ebx
SYMBOL_STACK_INDEX: 7
SYMBOL_NAME: srvnet!SrvNetWskSendData+c9
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: srvnet
IMAGE_NAME: srvnet.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4dbabc34
FAILURE_BUCKET_ID: 0xc4_e2_VRF_srvnet!SrvNetWskSendData+c9
BUCKET_ID: 0xc4_e2_VRF_srvnet!SrvNetWskSendData+c9
Followup: MachineOwner
Here's the output of mini dump file as well:
Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\windows\minidump\Mini021314-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: C:\Win2008E.DVD
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (12 procs) Free x86 compatible
Product: LanManNt, suite: Enterprise TerminalServer
Built by: 6002.18881.x86fre.vistasp2_gdr.130707-1535
Machine Name:
Kernel base = 0x82214000 PsLoadedModuleList = 0x8232bc70
Debug session time: Thu Feb 13 08:29:07.272 2014 (UTC - 5:00)
System Uptime: 3 days 23:15:45.259
Loading Kernel Symbols
Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis
Use !analyze -v to get detailed debugging information.
BugCheck C4, {e2, af033d18, 2d0000, 0}
Probably caused by : srvnet.sys ( srvnet!SrvNetWskSendData+c9 )
Followup: MachineOwner
9: kd> !analyze -v
* Bugcheck Analysis
DRIVER_VERIFIER_DETECTED_VIOLATION (c4)
A device driver attempting to corrupt the system has been caught. This is
because the driver was specified in the registry as being suspect (by the
administrator) and the kernel has enabled substantial checking of this driver.
If the driver attempts to corrupt the system, bugchecks 0xC4, 0xC1 and 0xA will
be among the most commonly seen crashes.
Arguments:
Arg1: 000000e2, IRP field is a user-mode address but Irp->RequestorMode is KernelMode.
Arg2: af033d18, IRP address.
Arg3: 002d0000, User-mode address present as the value of an IRP field.
Arg4: 00000000
Debugging Details:
BUGCHECK_STR: 0xc4_e2
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
PROCESS_NAME: spoolsv.exe
CURRENT_IRQL: 2
LAST_CONTROL_TRANSFER: from 824ff5a7 to 822e19bd
STACK_TEXT:
eff67a20 824ff5a7 000000c4 000000e2 af033d18 nt!KeBugCheckEx+0x1e
eff67a40 824fea32 af033d18 002d0000 9930e2e0 nt!VerifierBugCheckIfAppropriate+0x32
eff67a58 824fe7e0 af033d18 9930e2e0 99269b80 nt!ViIrpCheckKernelAddressForIrp+0x51
eff67a70 824f766d 99269b80 af033458 99269b80 nt!VfBeforeCallDriver+0x3d
eff67a90 82258931 af033fa4 af033fe0 99269b80 nt!IovCallDriver+0x1ef
eff67aa4 9b01271a eff67adc aad3183f bd99d34c nt!IofCallDriver+0x1b
eff67aac aad3183f bd99d34c eff67ad0 00000002 afd!WskProAPISend+0x67
eff67adc aad31490 9b01d9d0 af033d18 af033458 srvnet!SrvNetWskSendData+0xc9
eff67afc aad779d2 d5b93018 af033458 00000030 srvnet!SrvNetSendData+0x4d
eff67b14 aadb45bd af033368 aad75459 af033d18 srv!SrvStartSend2+0xa3
eff67b40 aad7522d af033fa4 eff67b84 824f7d4d srv!SrvFsdRestartReadAndX+0x127
eff67b4c 824f7d4d 00000000 af033d18 af033368 srv!SrvFsdIoCompletionRoutine+0x1d
eff67b84 822bb0fb 00000000 af033d18 eff67bf0 nt!IovpLocalCompletionRoutine+0x16e
eff67bb8 824f7b95 824f7a77 ccb4e7c8 eff67c44 nt!IopfCompleteRequest+0x11d
eff67c28 981a30d9 c3fbc2d8 ccb4e7c8 909c9dd0 nt!IovCompleteRequest+0x11c
eff67c4c 824f76be 909c9dd0 ccb4e7c8 9efe80e8 Npfs!NpFsdWrite+0x53
eff67c70 82258931 ccb4e838 ccb4e7c8 909c9dd0 nt!IovCallDriver+0x23f
eff67c84 8245ae25 9efe8114 ccb4e7c8 ccb4e838 nt!IofCallDriver+0x1b
eff67ca4 82427b13 909c9dd0 9efe80e8 00000001 nt!IopSynchronousServiceTail+0x1d9
eff67d38 8225ec96 909c9dd0 00000a39 00000000 nt!NtWriteFile+0x6fc
eff67d38 77755d14 909c9dd0 00000a39 00000000 nt!KiSystemServicePostCall
WARNING: Frame IP not in any known module. Following frames may be wrong.
0549f880 00000000 00000000 00000000 00000000 0x77755d14
STACK_COMMAND: kb
FOLLOWUP_IP:
srvnet!SrvNetWskSendData+c9
aad3183f 53 push ebx
SYMBOL_STACK_INDEX: 7
SYMBOL_NAME: srvnet!SrvNetWskSendData+c9
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: srvnet
IMAGE_NAME: srvnet.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4dbabc34
FAILURE_BUCKET_ID: 0xc4_e2_VRF_srvnet!SrvNetWskSendData+c9
BUCKET_ID: 0xc4_e2_VRF_srvnet!SrvNetWskSendData+c9
Followup: MachineOwner
I'd like to know how to fix this. Server has up-to-date firmware and drivers from IBM. It's also up-to-date on all windows updates.
Any help is greatly appreciated.
WillThis one may help.
http://msdn.microsoft.com/en-us/library/windows/hardware/ff559023(v=vs.85).aspx
I'd test the RAM and or get with IBM on best method to verify the hardware and drivers.
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
Hi Guys,
I'm experiencing a problem with CoCreateInstance, where it returns error 0x8007007e.
The code is something like this:
HRESULT hRes = S_OK;
CComPtr<IMyInterface> spObj;
if(FAILED(CoInitialize(NULL))) { /* quit */ }while(FAILED(hRes = spObj.CoCreateInstance(CLDIS_MyClass, NULL, CLSCTX_LOCAL_SERVER)))
// LogFailure(hRes);
Sleep(10);
The problems occurs only on a single machine having Windows 2008 Enterprise SP2 installed (it works fine on other machines / OS versions). It happens only during the system startup (this is a Windows Service) and only for the first call of the CoCreateInstance.
The second call always succeeds.
The problem does not occurr when starting the service manually from Services.
I did some investigation using Process Monitor and found that the HKCR\CLSID\[CLSID of MyClass]\LocalServer32!LocalServer32 registry value is accessed before the failure. The registry value exists - it is added by the Windows Installer during
installation.
If I remove the registry value then the CoCreateInstance always succeeds.
I've been trying to lookup for some documentation on HKCR\CLSID\...\LocalServer32!LocalServer32 but haven't found anything useful other than it's a "Windows Installer Entrypoint". I assume that the Windows Installer does some integrity checks when
calling CoCreateInstance for such class and this fails for some reason but currently I fail to find the reason.
Can anyone help finding out what's the root cause of the 0x8007007e error here, please? Any help or tip is much appreciated.
Many thanks!
Marcin.Hi Marcin,
This forum is mainly for talk about the product use related issue and not the best place to talk about the develop issue, for the develop issue we can post in MSDN forum for
the further help and your issue may need capture a dump then for the further analysis it is not an efficient way to work in this community since we may need more resources which is not appropriate to handle in the community. I‘d like to suggest that you submit
a service request to MS Professional tech support service so that a dedicated Support Professional can further assist with this request.
MSDN forum
https://social.msdn.microsoft.com/Forums/en-US/home
Please visit the below link to see the various paid support options that are available to better meet your needs.
http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
Thanks for your understanding and support.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Microsoft server 2003 standard edition r2 x64 bit product shows invalid product.
Dear all,
I am facing a problem, to register Microsoft server 2003 standard edition r2 x64 bit. My product key is ok. But on time of registration this product it will not accept my key or on Microsoft product registration support it's show its a invalid product.
Please help me to register this product.
Thanks
PuneetYou need to contact Microsoft's Activation Center and talk to someone. The phone numbers for reaching them are on the activation page you go through when trying to activate manually. Apparently the activation code you have is not 'ok', and only
Microsoft can help you with that.
A second thought is where did you get the media? If not from a reputable Microsoft source, then it could be the copy you have is a pirated copy with a key that Microsoft has deactivated. Again, only Microsoft can tell you.
.:|:.:|:. tim -
Windows server 2003 Standard edition RAM Upgrade
We are using Windows server 2003 Standard 32 bit edition in our office With HP ProLiant DL580 Generation 5 hardware , We are trying to upgrade RAM to 8 GB from 4 GB but it is not taking, It is detecting 8 GB RAM while booting but not showing in my computer
property.
Same thing we tried with Windows server 2003 Enterprise edition and it is working fine there.
Is there anyway to upgrade it ?It is normal. You simply need to use a 64 bit OS.
You need to re-install the OS to be running a 64bit version as no in-place upgrade is supported.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
Windows server 2003 standard edition 32 BIT
I NEED THE ISO FILE FOR WINDOWS SERVER 2003 STANDARD EDTION
THE ISSUE IS I DONT REMEMBER THE PASSWORD TO LOGIN THE SERVER SO I AM LEFT WITH NOTHING BUT TO RE INSTALL THE WINDOWS SERVER
PLEASE TELL ME IF THERE IS A WAY TO RESET THE PASSWORD( I DONT HAVE ANY RECOVERY DISC ) OR DO I NEED TO INSTALL A FRESH COPY OF WINDOWS , IF YES THEN PLEASE PROVIDE ME A LINK TO DOWNLOAD THE RELEVANT FILE.
IS IT POSSIBLE TO INSTALL 64 BIT AND USE THE KEY OF 32 BIT ? PLEASE ADVICE
THANKSHi:
Not the usual thing in forums to use all caps, but no offense taken.
For password reset, try this:
http://www.petri.com/forgot_administrator_password.htm
Note that Domain Admin Passwords are handled differently, see the link at the end of the page.
Larry Struckmeyer[MVP] If your question is answered please mark the response as the answer so that others can benefit. -
10g Express Edition on Windows 2008 Enterprise R2 x64 with Active Directory
I have successfully installed the 10g Express Edition on Windows 2008 Ent. r2 x64 with Microsoft Active Directory Domain Controller but i could not be able to run http://127.0.0.1:8080/apex
Although i have run the http://127.0.0.1:8080/apex on my another Windows 2008 R2 x64 ant WITHOUT Active Directory Domain Controller Role.
i think its related with AD Domain server role of my server, because i run that on same config and operation without Active Directory Domain Controller role.
Can anyone help about this issue?
thanks in advanceI have experienced the same problem - running 10g Express on a Win 2008 (32-bit). When not being a Domain controller, the install was fine. When installing after the server had been given the Domain Controller role (+the required DNS), it failed. NO FIREWALLS are involved on the server. Seems like Oracle Express has problems being installed in this kind of environment - independent of x32 or x64 bit OS.
Edited by: 811504 on Nov 17, 2010 11:44 PM -
Oracle 8i on Windows Server 2003 Standard Edition R2
All the installation process works fine but at the end the database creation process fails. When I see the log file it shows, starterdb unable to run.
There is another problem, the setup does not start from CD. When I copy all the files to hard drive and rund setup it works.Your are working with software desupported so long ago Mastadons and Sabre Toothed Kittycats still roamed the earth.
And also long before Windows 2003 on which it is totally untested and unsupported.
Time to move to software supported during the current millennium: That means 10gR2 or 11g. -
Hi all,
Today I was checking the server and I find that C: disk is not showing Under "My computer" whereas it is showing under disk management and its status is okay. Please tell what the problem and how I resolve that issue? Because server is in production and we can't afford sudden downtime.
Regards
Ali RazaHi Walter,
OS image is 2003.1.5.
Regards
Ali Raza -
Failed Windows Server 2003 Enterprise SP2 to Windows 2008 Enterprise OS Upgrade
Attempted to upgrade the OS on our Primary Domain Controller which is running Windows Server 2003 Enterprise with Service Pack 2 installed on a HP ProLiant DL360 G4P Server with 2GB of ram, 3.2 GHz Processor and 53.2 GB of free space on C. I took
the following steps prior to attempting upgrade.
1. Determined that Server meet the minmum requirements for upgrade.
2. Installed all Windows Updates.
3. Uninstalled McAfee Virus Scan Enterprise Application
4. Backed Up and Imaged Primary Domain Controller.
5. Tested Domain Replication to ensure Primary and Backup Domain Controllers were communicating with each other.
6. Set Domain Function Level at Windows Server 2003
7. Placed ADPREP folder on C:\ on Primary Domain Controller and ran "adprep /forestprep" and "adprep /domainprep" successfully
8. In the C:\Windowd\System32 renamed the WindowsPowerShell application folder to WindowPowerShell-Old, the application failed the Upgrade compatibility test.
Loaded the DVD: "Windows Server 2008 for Enterprise, Standard and Datacenter 32bit Edition", ran installation in upgrade mode to preserve existing settings and software. The Ugrade ran to last step, application install and failed at
26% complete with the following errror message:
"Windows installation encountered an error and cannot continue. Your computer will now restart and your previous version of windows will be restored"
My questions are why did the upgrade fail? What can we do to ensure the upgrade will succeed next time?
I have incuded the Setuperr.log below.
2014-08-24 08:48:27, Error [0x08081e] MIG Failed to load manifest at C:\$WINDOWS.~BT\Sources\dlmanifests\errorreportingfaults-dl.man: class UnBCL::XmlException: hResult = 0x0, Line = 2, Position = 134;
void __thiscall UnBCL::XmlDocument::Load(class UnBCL::String *)
2014-08-24 08:48:30, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:30, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:30, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:35, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:35, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:35, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:35, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:35, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:35, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:35, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:35, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:35, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:58, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:58, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:58, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:58, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:58, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:58, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:58, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:58, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:58, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:58, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:58, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:58, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:59, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:59, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:59, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:59, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:59, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:59, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:59, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:59, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:59, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:59, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:59, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:59, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:49:09, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:49:09, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:49:09, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:49:09, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:49:09, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:49:09, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:49:09, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:49:09, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:49:18, Error [0x08071d] MIG CDownlevelOCStore::GetOCCollection, Failed to load C:\$WINDOWS.~BT\Sources\dlmanifests\errorreportingfaults-dl.man.: class UnBCL::XmlException: hResult = 0x0, Line
= 2, Position = 134; . .
void __thiscall UnBCL::XmlDocument::Load(class UnBCL::String *)
2014-08-24 08:49:22, Error [0x08081e] MIG Failed to load manifest at C:\$WINDOWS.~BT\Sources\dlmanifests\errorreportingfaults-dl.man: class UnBCL::XmlException: hResult = 0x0, Line = 2, Position = 134;
void __thiscall UnBCL::XmlDocument::Load(class UnBCL::String *)
2014-08-24 09:13:05, Error [0x080792] MIG COCEventTracing::COCEventTracing Failed to call StartTrace 87.[gle=0x00000057]
2014-08-24 09:14:26, Error [0x0802b6] MIG Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [EventMessageFile]. Exception class Mig::Win32ErrorException: Win32ErrorException:
Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [EventMessageFile]], which is protected by WRP..
void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
2014-08-24 09:14:26, Error [0x0802b6] MIG Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [TypesSupported]. Exception class Mig::Win32ErrorException: Win32ErrorException:
Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [TypesSupported]], which is protected by WRP..
void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
2014-08-24 09:14:27, Error [0x0802b6] MIG Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\Tlntsvr [EventMessageFile]. Exception class Mig::Win32ErrorException: Win32ErrorException:
Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\Tlntsvr [EventMessageFile]], which is protected by WRP..
void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
2014-08-24 09:14:27, Error [0x0802b6] MIG Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [EventMessageFile]. Exception class Mig::Win32ErrorException: Win32ErrorException:
Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [EventMessageFile]], which is protected by WRP..
void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
2014-08-24 09:14:27, Error [0x0802b6] MIG Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [TypesSupported]. Exception class Mig::Win32ErrorException: Win32ErrorException:
Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [TypesSupported]], which is protected by WRP..
void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
2014-08-24 09:14:27, Error [0x0802b6] MIG Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [EventMessageFile]. Exception class Mig::Win32ErrorException: Win32ErrorException:
Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [EventMessageFile]], which is protected by WRP..
void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
2014-08-24 09:14:27, Error [0x0802b6] MIG Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [TypesSupported]. Exception class Mig::Win32ErrorException: Win32ErrorException:
Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [TypesSupported]], which is protected by WRP..
void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
2014-08-24 09:30:13, Error [0x060005] IBS CallBack_StampRequiredDrives:An error occurred while fixing paths on black board GLE is [0x0]
2014-08-24 09:30:13, Error [0x064188] IBSLIB RollbackReinitialize: threw exception.: class UnBCL::ArgumentException: Directory "X:\$WINDOWS.~BT\Sources\Rollback" doesn't exists..
__thiscall OSRollbackService::CCheckpointImpressario::CCheckpointImpressario(const unsigned short *,class OSRollbackService::CCheckpointSequence *,int)
[gle=0x00000003]
2014-08-24 09:33:19, Error [0x0804b3] MIG CMigWorkingDirHelper::CMigWorkingDirHelper() failed.: class UnBCL::DirectoryNotFoundException: root of directory to create not found.
class UnBCL::DirectoryInfo *__stdcall UnBCL::Directory::CreateDir(const class UnBCL::String *)
[gle=0x00000003]
2014-08-24 09:33:19, Error [0x0802fa] MIG MigStartUp caught exception: class UnBCL::DirectoryNotFoundException: root of directory to create not found.
__thiscall Mig::CMigWorkingDirHelper::CMigWorkingDirHelper(class UnBCL::String *)
__thiscall Mig::CMigWorkingDirHelper::CMigWorkingDirHelper(class UnBCL::String *)
class UnBCL::DirectoryInfo *__stdcall UnBCL::Directory::CreateDir(const class UnBCL::String *)
[gle=0x00000003]Hi,
Here are some limitation of upgrading:
Upgrading is supported from x86-based and x64-based computers, but cross-architecture upgrades are not supported.
Cross-language upgrades are not supported.
Upgrading from Windows Server 2003 to a Server Core installation of Windows Server 2008 is not supported.
We cannot upgrade the failover clusters from Windows Server 2003 to Windows Server 2008. Before upgrading, we must uninstall failover clustering.
For detailed information about Upgrading to Windows Server 2008, please refer to the link below,
http://technet.microsoft.com/en-us/library/cc755199(v=WS.10).aspx#BKMK_Supported
Besides, to confirm that it isn't an IO issue, could you please try to copy the DVD to the local disk?
If error occurs, it may be an IO issue.
Best Regards.
Steven Lee
TechNet Community Support
Maybe you are looking for
-
Created pages in SP 2013 Online and they are not showing up in SPD 2013
Hi Am reposting this question as the suggested solution did not work :-( I created pages in SP Online 2013, on the public side, as suggested I did find where pages had to be approved, they were I did see others that were marked as "draft" they were n
-
Cant burn getting Error 4280 (Yes I have latest version)
I was having this issue before I upgraded to the newest version and still seem to not be able to burn. I am getting Error 4280? There isnt much info on this to fix it it seems... I'm running Win7 64 Never had a problem before. Ideas to fix this?
-
Forms login error for first 2-3 time
Hello, we have a strange issue , users from Europe region are getting Form connection error(FRM 92050) while they login for the first time of the day,self service page is coming fine then while opening any form it's giving error. after they close the
-
Premiere Pro 2014.1 causes continuous BSODs
Since updating I could no longer work in Premiere as v2014.1 keeps crashing and triggering blue screens. It works for a while then on doing something innocuous (such as "reveal in Project" an item on the timeline, for instance) it hangs and brings th
-
[X-Fi Titanium] SPDIF In (XBOX360)
Hello, I have a XBOX 360 with a digital output, when i set the XBOX to stereo i get the sound out off my speakers but the quality is tereble. When I set the output to digital output 5. I don`t hear any thing at all. When i look at the controll panel