Migrating your data from one pc to another?

I recently installed photoshop elemens version 11 on a new laptop. I migrated the photo an film files. However, using the organizer the the files are recognized and shown, as usual. But the albums, created on the prevous laptop, were not recovered.

mtyj wrote:
I recently installed photoshop elemens version 11 on a new laptop. I migrated the photo an film files. However, using the organizer the the files are recognized and shown, as usual. But the albums, created on the prevous laptop, were not recovered.
How did you move (migrate) your files ?
The correct way fot the migration is:
http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html

Similar Messages

  • Help with migrating user data from one account to another

    I am on a G5 with 10.4.11. I installed FCP studio 6 and everything works fine except compressor. I have had only one user account on this mac (i will call it account 1). I was told to create another account (account 2), log on and see if compressor works. It does. Basically there are files missing on account 1 and compressor won't run. I have installed 3 times and no change.
    Anyway I was told to migrate all my user data from account 1 to account 2. I have been looking at threads and want to make sure I am doing the right thing. I found a way to close. Please see if this works. IT may be from the tiger forum:
    pick a short user name for your new account. then run the following terminal commands
    sudo mkdir /users/newshortname
    sudo ditto ~ /users/newshortname
    You'll have to enter your admin password (which you won't see) after the first command. that's normal. This will copy your current home directory to /users/newshortname. Then go to system preferences->accounts and create a new account with the short name newshortname. You'll get a popup saying that a home directory by that name already exists and asking if you want to use it. say yes.
    Anyway, I would like to migrate everything from account 1 to 2 and have all preferences...everything. I would also like to be able to delete the old account...account 1 and rename account 2. Since this is a home MAC, I really don't need it PW protected. I would like this MAC to just use my new account 2 at start up.
    Please ask me any questions. This is my editing MAC, and I can't get around inside the OS. I know FCP like the back of my hand, but don't want to screw up this computer.
    Thanks in advance.
    Message was edited by: Nelson May

    Yeah, you should be able to move most of it by changing permissions.
    Network settings could be any/all of these though for instance...
    /Users/YourUserName/Library/Preferences/ByHost/com.apple.networkConnect.<12 digit number>.plist
    /Users/YourUserName/Library/Preferences/com.apple.internetconnect.plist
    /Library/Preferences/SystemConfiguration/preferences.plist
    /Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
    /Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
    /Library/Preferences/com.apple.sharing.firewall.plist
    /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
    /Library/Preferences/com.apple.networkConfig.plist
    /Library/Preferences/SystemConfiguration/com.apple.nat.plist
    /Library/Preferences/com.apple.print.FaxPrefs.plist
    As well as the old Keychain & cookies from your Browser.

  • How can I migrate my data from one user to another (to eliminate a previous owner's shortname?)

    I purchased a Macbook Pro second hand a couple of years ago and whilst I immediately changed my user name, didn't realise that the previous owner's short name still exists (I was a bit of a Mac virgin at the time!). I now have tonnes of documents, applications, settings, bookmarks, etc. which are assigned against the previous owner.
    I've now bought myself an iMac and before I migrate from the older machine to the new iMac, I wish to remove all trace of the previous macbook pro owner.
    In researching how to change the shortname user, I've tried virtually everything and everytime have to resort to time machine to restore my settings, desktop, etc. I simply cannot get this to work. Even what seems quite a comprehensive article and procedure didn't work i.e. "full monty" section of the following: http://www.macworld.com/article/1132693/changeshortusername.html
    Having failed miserably using different techniques and subsequently having to restore three times from time machine which is costing me hours upon hours, I'm absolutely frustrated at how to do this ... all I want to do is migrate everything to a new user account and delete the old user and previous owner.
    Surely someone out there can provide a fool proof, simple and effective method to migrate the user data and keep intact? 
    Please help if you can!

    Pondini wrote:
    The only possible downside to this is, the transferred account may lose permission to the files on previous backups.
    Actually, there is a way to prevent that, also a bit odd.  On the old Mac, go to System Preferences > Accounts and unlock the padlock.  Control-click (right-click) the account you want to delete in the sidebar and select Advanced Options.  That will bring up a window like this:
    DO NOT CHANGE ANYTHING ON THAT WINDOW.  Just note the UID number.
    When you start up the new Mac, the first account created (during initial setup) is automatically assigned #501.  The next is 502, etc. What you want to do is, after creating the first account, Restart and set up one or more temporary accounts in a way that will include that number;  then set up an additional one (an Admin account with the identical names as the one you want to trash).  Then log on to the additional one, delete the temporary ones and Restart your Mac (to finish clearing the numbers).
    Log on and run Migration Assistant as above.  That way, you'll get the prompt to rename it as above, but the UID it has will not be a duplicate, so Migration Assistant can transfer it "as is."
    Message was edited by: Pondini

  • Migrating my data from one system to another

    Hi All.
    We have an application hosted on one SAP system. Now the users plan to use another server to host the application.
    All data related to that app (around 10 tables) need to be migrated over too.
    Is there any other way than to write a program to download/upload the data to/from a text/excel file?
    Anything we can do to avoid writing the programme?
    Thanks.

    Thanks Krishna. But can you please elaborate on what you are saying?
    How to "Add table values" to the TR?
    I thought we could only migrate if we had a maintenance view and from there it shall automatically include in the TR if we maintained it via SM30?
    But here the case is diff.
    It is an application table with no view. Lets say Table Z123. It has 5 fields with MANDT too.
    Now around 1000 entries have been filled by the application (program). Now how do I migrate those 1000 entries to another system via TR?
    Thanks again!

  • Question about moving all iTunes data from one computer to another.

    I have a Windows XP. Now I have a windows 7. All of the songs from the XP are available on the new computer via a Z drive. But when I plug my iPod into the new computer it says that it is registered with a different library and asks me if I want to delete all the songs and apps and replace them from the ones on the new library. I don't want that to happen. And all of the apps on the old computer aren't available on the new one. How do I get the apps from one computer to another, and how do I sync my iPod on the new computer without erasing all high scores, app data, songs, and other information? And how do I get a song fro the new computer back to the old one?
    Devin

    This is the way I would normally recommend that you migrate your library from one computer to another.
    Backup the library with this User Tip.
    Restore the backup to your new computer using the same tool used to back it up.
    Deauthorize the old computer if you no longer want to access protected content on it.
    Keep your backup up-to-date in future.
    If you have content on the new computer that you want to add to the library on the old one then copy that across via network/memory stick etc. before attempting to migrate the library again.
    tt2

  • Migrating CMSA Assets and Data from one server to another

    Hello,
    Is there an official way to migrate the data from one CMSA installation to another one?  In the near future we're going to need to move from our development machine into the production environment, and it would be great if there was a way to get all the assets we've created in dev over to production without the need to manually re-create them all.
    Is this possible?
    Cheers,
    Kristian

    Check out http://help.adobe.com/en_US/LiveCycle/9.5/AssetComposerTechGuide/WS2bacbdf8d487e5824fb272 0612b944351b6-8000.html for this.

  • Since I migrated my files from one Mac to another and am now running Yosemite, Photoshop Elements 9 (adequate for what I do) is not showing the previous functionality on some of the tools. I have uninstalled/reinstalled twice to no avail.

    Since I migrated my files from one Mac to another and am now running Yosemite, Photoshop Elements 9 (adequate for what I do) is not showing the previous functionality on some of the tools. I have uninstalled/reinstalled twice to no avail.  Is there a fix? Also, when I tried to update, it comes up with this error.

    I have a similar problem. I found out that my macbook air created a new USER with my former's computer user name. You can check that by going into System Preferences -> User & Groups, and see if a "Other user" has been created. You have to login under this new USER to find your transferred contacts in the address book.
    My problem is that I do not know how to merge the 2 USER logins or transfer the data from the new USER created into the existing one.

  • Urg req: Migration of data from 1 category to another - Error with 5 files

    Gurus,
    I am trying to migrate the data from one content category to another and it woks just fine with the standard sap report:DMS_RELOCATE_CONTENT.
    We moved all the documents except 5 files, when we use the report for the DIR's the content server shuts down automatically.
    I tried to read the file from SAP (CV03N) and the same thing happens. Can anyone pls suggest any solution for the issue. If we can atleast read the file we can check it into other content category manually but the challange here is to know what is causing the content server to be down.
    Appreciate your suggestion ! !
    //Madhav.

    Hi,
    could it be that you have also raised a SAP support message on this issue? Because I remember this kind of scenario and I forwarded a support message to the Content Server experts some days ago. At the moment the Content Server development team is analysing the issue.
    So if this is you message I would kindly ask you to wait for the reply of the development expert. Otherwise please tell me so I can update you with the findings too.
    Best regards,
    Christoph Hopf

  • Help transferring data from one account to another

    I bought my computer in August 2008 and had previously had an iBook. When transferring my data from my old computer to the new one, I guess I did it wrong so instead of it transferring all to the same place it created two accounts.
    Is there way to transfer my music/pics etc to my main account?
    Also, my iphone is backed up the other account because thats where all my music is, is there a way to also keep all this data once I am using only the main account?

    When you use Migraine Assistant, it transfers the account of the older machine to the newer because the users name is involved in everything, like iTunes playlists etc.,
    Since to run Migraine Assistant you need to have gone through setup on the Mac and created the main Admin account, when you Migrate, you transfer the other account so you wind up with two accounts on the new machine.
    All you have to do is log into the Admin account of the first user you created, then change the acount status of the Migrained account to Admin and reboot, check it out well, then delete the first Admin account at your own leaisure. However it's best to leave two accounts on the machine, just in case your locked out for some reason.
    If you rather transfer your files from one account to another use the Shared Drop Box
    If you have three accounts on the machine (original admin and two migrained migrateda accounts), you'll just have to monkey around and clean up the mess.

  • Transfer data from one database to another without identities but keep the relation b/w PK and Foreign key

    Hi,
    I need to transfer data from one database to another database (both are identical databases). 
    1. Not transferring identity columns (primary keys). the destination table might have the same key.
    2. keep the PK's and FK's relation b/w parent and child table
    3. I have 4 levels 
    Example: tableA (col1 int identity(1,1) , col2, col3)
    tableB (col1 int identity(1,1) ,
    col2 , col3) -- col2 has the foreign key relation with tableA.col1
    tableC (col1 int identity(1,1) ,
    col2, col3) -- col2  has the foreign key relation with tableB.col1
    tableD (col1 int identity(1,1) , col2, col3) -- col2  has the foreign key relation with tableC.col1
    please advise me.
    Thanks in advance

    Try the below:
    /********************************SAMPLE TARGET***************************************************************/
    Use MSDNSamples
    create table TableA(LevelValueId int identity(1,1) primary key, name varchar(100))
    Insert into TableA(name) Select 'R1'
    Insert into TableA(name) Select 'R2'
    create Table TableB(ChildId int identity(100,1),name varchar(100), LevelValueID int references TableA(LevelValueId))
    Insert into TableB(name,LevelValueID) Select 'Childname1',1
    /********************************SAMPLE TARGET***************************************************************/
    /********************************SAMPLE SOURCE***************************************************************/
    Use Sample
    create table TableA(LevelValueId int identity(1,1) primary key, name varchar(100))
    Insert into TableA(name) Select 'C1'
    Insert into TableA(name) Select 'C2'
    create Table TableB(ChildId int identity(100,1),name varchar(100), LevelValueID int references TableA(LevelValueId))
    Insert into TableB(name,LevelValueID) Select 'Kidname1',1
    /********************************SAMPLE SOURCE***************************************************************/
    USe MSDNSamples
    /********************************MIGRATION INTERMEDIATE TABLE***************************************************************/
    --Migration table
    Create table Mg_TableA(LevelValueId int, NewValueId int)
    /********************************MIGRATION INTERMEDIATE TABLE***************************************************************/
    /********************************ACTUAL MIGRATION FOR MASTER TABLE***************************************************************/
    MERGE INTO TableA
    USING sample.dbo.TableA AS tv
    ON 1 = 0
    WHEN NOT MATCHED THEN
    INSERT(name) Values(tv.name)
    Output tv.levelValueId ,inserted.LevelValueid INTO
    Mg_TableA;
    /********************************ACTUAL MIGRATION FOR MASTER TABLE***************************************************************/
    /********************************ACTUAL MIGRATION FOR CHILD TABLE***************************************************************/
    Insert into TableB (name,LevelValueID)
    Select A.name,B.NewValueId From sample.dbo.TableB A
    Inner join Mg_TableA B on A.LevelValueID = B.LevelValueId
    /********************************ACTUAL MIGRATION FOR CHILD TABLE***************************************************************/
    /********************************TEST THE VALUES***************************************************************/
    Select * From TableA
    Select * From Mg_TableA
    Select * From TableB
    /********************************TEST THE VALUES***************************************************************/
    Drop table TableB,Tablea,Mg_TableA
    Use Sample
    Drop Table TableB,Tablea

  • How do I transfer data from one iPhone to another?

    How do I transfer data from one iPhone to another?

    If your old device is an Apple using iOS 5 or later, and you have an iCloud account, you can transfer all your saved messages, email accounts, photos, notes, and other personal settings to your new iPhone.
    Here's how...
    Connect your old Apple device to WiFi and to a power source.
    Back it up to iCloud by going to Settings > iCloud > Storage & Backup and toggling iCloud Backup on. The time it takes to ba ckup depends on how much data you have and on the speed of your internet connection.
    iCloud backs up your device once a day. If it needs backing up before you transfer to your new iPhone 5, tap Back Up Now in Settings > iCloud > Storage & Backup. Do not start transferring before the backup is finished.
    Turn on your new iPhone and complete the setup by selecting your language and country, and choose whether to enable Location Services. When prompted, choose your WiFi network.
    When prompted to set up, choose Restore from iCloud Backup, tap Next, and enter your Apple ID and password.
    Select the backup of your old device and tap Restore. Wait until the device has finished restoring from the backup.
    When the restore process is complete, your iPhone will restart and be ready to use.
    Connect your iPhone 5 to iTunes to sync data not contained in the backup (such as music, videos, apps, and so on). You can choose the data that are synced by clicking the syncing tabs in iTunes.

  • How do i backup data from one iphone to another

    how do i backup data from one iphone to another?

    Back up your old phone, then restore your new one from the backup.  See http://support.apple.com/kb/HT2109.

  • How to move only subset of data from one database to another?

    Both source & destination are Oracle11g databases.
    The requirement details are as below,
    1) The database contains static as well as transactional data for telecom domain.
    2) We have to move region-wise data from one database to another.
    3) There are around 10 regions.
    4) The region wise data extraction from source db is based on around 40 to 50 tables. Rest of the tables contains
    static data & it will not change.
    5) The volume is around 1 million subscribers per region.
    6) The migration is required because
    a) The client is upgrading its base product which uses this database
    b) There is a change in structure of static tables
    c) Hardware upgrade
    d) The client want to start with single region on new database & rest of the regions will be operated from old
    database.
    7) Keep execution time to very minimum.
    I am thinking to have solution as below,
    1) Create destination database with upgraded db structure (as mentioned in 6b)
    2) Create database links to access source db in destination db.
    3) Write SQL queries to fetch data from all the respective tables for a specific region
    4) Write separate PL/SQL blocks for each table to fetch data from source db & insert into respective table in
    destination db
    a) Use FOR ALL & bulk collect to improve the performance
    b) Divide table data into multiple chunks & execute parallel batches (around 10) to insert the data
    5) Validate pre & post counts to verify the success of migration
    Is there any other better way?
    Regards,
    Sandeep

    How to move only subset of data from a partiular table by using transportable tablespace?
    E.g. SUB table using SMP_SUB tablespace contains subscriber data in source database.
    The indexes defined on SUB table are under SMP_IDX_SUB tablespace
    The subscribers data can be categorized by different regions, say region_id column. Then how to move data & indexes of SUB table from source db to destination db?
    any specific example would be helpful.

  • How to transfer data from one macbookpro to another

    how to you transfer data from one macbookpro to another. the other one was stolen.

    If your computer was stolen and you don't have a data backup, you can't transfer data from the stolen computer to your new one. If you have a data backup, restore the data to the new computer.

  • Move data from one fs to another from a particular position.

    Hi all,
    i have a requirement where i want to move data from one field symbol to another from a particular
    position.
    I have a work area which contains string values. i have converted this string to hexadecimal value .
    in this hex string m lukin for a position where '0A' occurs. Now i have to pick the string till dis '0A' value and move it to some other field symbol. Can anybody tell me how to do that.
    The code i have written is as follows:
      FIELD-SYMBOLS: <fs> TYPE x.
                 data: temp1 type string,
                       p_word type string,
                       temp2 TYPE string,
                       w_len TYPE i.
                       temp1 = wa_value-value. "this wa containd the value
                       w_len = strlen( temp1 ).
             if temp1 cp '"*'.
               ASSIGN wa_value-value TO <fs> CASTING TYPE x.  " converting wa to hex value
                  DATA: VAR TYPE i,
                        COUNTER TYPE i,
                        line_feed_count type i,
                        temp_count type i.
             VAR = strlen( wa_value-value ).
             CLEAR: COUNTER, temp_count, line_feed_count.
               WHILE COUNTER LE VAR.
                IF <fs>+counter(1) = '0A'.
                line_feed_count = line_feed_count + 1.
                COUNTer = COUNTer + 1.
                ENDIF.
                COUNTER = COUNTER + 1.
               ENDWHILE.
            endif.
    Now , i want to pick data from starting till the position it gets '0A' and then again till it finds another '0A'.
    Thanks in advance.

    Hi,
    As everyone has rightly pointed out, there is no direct way of transferring the data from one appset to another. However, there are definitely few ways of doing it:
    1. Run export package. Export the data in flat file. Import the data using import DM package.
    2. Export the data from the cube of your application in excel file. Then run the import DM package to load the data.
    3. Run UJBR transaction in SAP. Take the backup of the transactional data. You will get few flat files. Run the import DM package.
    All the above steps will work only if the structure of the applications in both the appsets is the same. Otherwise, you will have to modify the flat file before uploading the file.
    Hope this helps.

Maybe you are looking for