Migration Assistant and Adobe License Not working

I used migration assistant and my adobe cs3 license is not valid. Adobe had me delete a file and download their license recovery tool. When I launch it a non functioning terminal window comes up. I was told the user ID and password would be the next thing I saw. Any suggestions?

I believe Migration Assistant was upgraded for Lion early in the week.  Do you have the latest?  Should be Version 4.
Look here http://support.apple.com/kb/DL1420
Phil
Message was edited by: w7ox

Similar Messages

  • Flash Player And adobe reader not working and downloads don't work

    I have IE 8 and windows vista and everything has worked great for 2 years until 2 or 3 weeks ago.  At that time my flash player stopped working so I could no longer get videos , streaming stock quotes, weather map loops, etc and when I go to websites that use Flash (i.e. Piaaz Hut) it wouldn't work.  Also, at that same time my adobe reader stopped working properly and I can't view mosy PDF Files.
    I have gone through many of the posts on this forum and have tried many of the fixes, but none have work for me.
    I tried to uninstall the Flash Player, but I didn't use the Adobe uninstaller.
    Whenever I try to update or load the Flash player, a dialog box with the globe tossing papers to the folder appears and then after a few seconds I get the the message that IE can't install_flash_player_ax.exe from fp download.adobe.com, and then a message that says IE was not able to open this internet site. The requested site is either unavailable or cannot be found.
    In control panel programs I have listed
    Adobe AIR      no size
    Adobe Flash Player 10 active X           no size
    Adobe Reader 9.3     141mb
    Macromedia Shockwave player      no size
    In Tools i have the following add ons and they are all enabled
    Shockwave Flash object 10.0.42.34
    Adobe PDF Link Helper
    Adobe PDF Reader
    Macromedia Shockwave Active X Control 10.1
    As I said I've already attempted a number of the fixes on this forum, but so far no luck.
    Does anyone have any suggestions on what else I might try?
    Thanks

    Ok, I tried to download the firefox browser but IE wouldn't let me download it.  My friend downloaded it from their computer to a flash drive and I loaded it to my computer from the flash drive.  The download of Firefox from the flash drive worked, and now I'm using Firefox & both my adobe flash player and my adobe reader are working just great.
    However, neither the flash player nor the reader are working if I use IE, so I guess I will just have to use Firefox as my browser.
    I'm going to mark my question as answered since I really don't care that I have to use Firefox instead of IE,although I can't understand why it works using Firefox but not using IE.
    Thank you so much for your assistance in walking me step-by-step through this problem until I was able to reach a satisfactory solution.

  • After Restoring with Migration Assistant internet accounts are not working properly

    Hello!
    My Macbook Pro's HDD fried a week ago, so I swapped it for a new one. I had a backup from about 30mins before the issue happened, so I thought everything would go fine with Time Machine. Well, not quite. After installing Mac OS X Mavericks from the Disk Utility and telling the system to apply the latest backup on Migration Assistant during the installation, everything started up the way I left it, but several problems showed up and I have been trying to troubleshoot them.
    Issues:
    1. I used to have Facebook, Twitter and two Gmail accounts logged via the Internet Accounts preferences. Used the gmail accounts for notes, contacts and calendars. Now, they all show up on the menu, but when I click on any of them it tells me they aren't connected and asks me for their password. When I put it down, it gives me an "Unable to verify account" message. If I delete the accounts and try to reinsert them, I get the same message. What's even more weird: When I restart, they are all there again.
    2. Notes doesn't update properly. It shows me all the notes up until like 4 weeks ago, and whenever I even click on the app's window, it tells me it can't connect to Gmail and asks me for its password again. Several other apps that require syncing, like Calendar, have the same issue.
    Troubleshooting attempts:
    1. It's not a problem with these accounts, as I've been able to  sync them no problem if I create a new user. But I had some serious work being done and I don't really want to get a fresh start.
    2. I tried doing a clean install and when the Migration Assistant showed up I asked to transfer everything except personal documents and data. It worked, but I lost all my personal files that are not on dropbox (not many, but there were a few important things). Also the wifi didn't connect at all, kept saying it was self assigning an IP or whatever. This did not happen before.
    3. Not using migration assistant at all, but restarting the system and restoring a time machine backup, even an earlier one from that same day. Mac gets stuck on spinning wheel during boot :/
    This killed my weekend's productivity already, as each clean install and time machine restoring takes 3hrs+. I don't know what to do at this point.
    Macbook Pro, Early 2011, 13". Old HDD 320gb, new one 500gb. OS X Mavericks 10.9.4 (the backup is from 10.9.3)

    ragob66,
    Welcome to the Apple discussions!
    Try this:
    *Accessing Time Machine Backups From Another User Account or Computer*
    Yes, you can do this using the Time Machine interface.
    Attach the drive containing the TM backups to your computer.
    Control-click the TM icon in the dock and select "Browse Other Time Machine Disks...".
    Highlight the desired disk and click “Use Selected Disk”. This will now allow you to browse those TM backups via the ‘time travel’ window. From here you can restore what files you need access to. Bear in mind that any files moved will have the permissions of that previous user account. Thus you may be prompted for the user name and password of that previous account. However, once verified you should be able to adjust “Sharing & Permissions” in the files “Get Info” window.
    Let us know if this resolved your issue.
    Glenn

  • Migration Assistant from Windows PC not working

    I have just got my first iMac and now trying to use the Migration Assistant with the iMac but it is not working.
    I have loaded migration assistant on the house pc and when runnung Migration Assistant on the iMac it recognises the Dell PC.  However it then seems to lock and say 'looking for other sources' and then sits in a loop.
    I then open Migration Assistant on the PC and that just says 'waiting for mac to respond'
    Are there any additional settings I need to change on the PC? or anywhere decent for support - there's hardly any additional material on the Apple site.
    My wife is wondering what was the point of getting a Mac if the first thing doesn't even work.
    Very frustating

    If you are going to Start Over... You may want to have a look here...
    http://pondini.org/OSX/Setup.html
    And here...
    Migration Assistant tips and tricks

  • Why java and adobe are not working in my mac?

    I have been trying to download Java and Adobe unsuccessfully. There were working before.
    When I check the applications the logos are there, but I can't open pages that require  Java or Adobe.
    Every time I download the programs it tells me that there where no problems with the download. When I press the bottom to verify the program it says that there was a  problem. Please Help!!!!

    IIf the strange SMS are coming from known contacts, that's normal for iMessages that don't arrive and are converted to text.  Don't know why but it happens when my bf is overseas and his company phone can't access data - the iMessages he tries to send have a lot of symbols when they come as text but none when the finally arrive as iMessages.  Usually it's mostly lots of @@@@@@.
    if you didn't buy the phone new, the previous owner may still be linked to the phone and they are his/her messages you are getting.  I have seen a lot of posts about this on various forums and can't remember the fix but it's to do with iTunes and you may need to contact the previous owner. 
    if you did buy the phone new,check with the store that it wasn't used as a demo model.  They may be able to assist you setup your messages.  If not, you may need to search for solutions online or hopefully someone else who's had the exact issue may be able to help you here.  Good luck.

  • Backup Assistant and Verizon Cloud not working correctly

    I have a Samsung Galaxy SIII.  Been using BU Assistant Plus a long time.  Recently found out about "Cloud"...downloaded it, installed it, can't load it.  Have repeatedly downloaded, installed, tried to load, uninstalled, reinstall....  I've about had it.   Neither Back Up Assistance Plus, or Cloud are working properly.  Cloud - not at all.  I click the icon, the red screen appears with a gray radio button that says, "Get Started".  I press it, then after 5 seconds the screen goes black, a dialog box appears saying that the app has been stopped, do I want to send an error report, which I do send...  Anyone have a clue?    Same happens on my son's Stratosphere 2 and husband's Lucid... Please advise!  Thx
    Message was edited by: Admin Moderator

    I am having exactly the same problem~ SO, so frustrating, as I do all my updating on my phone, not the cloud or my desktop computer!!   And, likewise I called about hte issue and got the same advice as Spikey and did the same thing with the same shocking results (deleting all contacts on my phone).  They told me to go into Settings, "backup assistant Plus" and make sure the "sync contacts" button is turned off first, then go log into my account online, delete all the contacts there, then come back to phone and choose the "backup now" button at the bottom of the "backup assistant plus" screen under settings.  I did all this, and while there LITERALLY saw the box for "sync contacts" check itself back on and start sycing with the cloud, where I had just deleted all my contacts with the intent of uploading all the current, newly update info from my phone onto the cloud~ Instead all this automatic stuff started happening and the cloud started syncing my contacts to my phone, which is to say, it deleted all my contacts because the account online had just been cleared out~ I was so bummed, can't even tell you how long it took to update everything to current manually over a couple weeks on my phone and it was all gone~ Turns out I went into the trash online and was able to undelete all my deleted contacts from the online verizon account, (mind you, these were the out-of-date ones I was trying to replace with my current phone ones), and then the cloud automatically synced all these old contacts onto my phone again.  So not only did I not get to send the new ones to the cloud, but the cloud sent back all the old ones replacing the work I had done. 
    I'm not at all convinced that they understand at verizon how to get around this.  I would be really glad if anyone else has and could pipe in here.  It's a real problem. 

  • Migration Assistant in Lion OS not working

    Installed Lion OS on both my iMac I7 and my Mac NoteBookPro with I7 processor. Tried to connect the two computers with Firewire but no luck. The remote HD pops up on the desktop but Migration Assistant cannot find the other computer, irrespective of which one I make the client. Exactly the same happens with ethernet cable. I do know that Firewire on the NoteBook worked under Snow Leopard. Any ideas anyone, please, or is Migration Assistant actually stuffed,
    Best Regards
    Dietrich

    I believe Migration Assistant was upgraded for Lion early in the week.  Do you have the latest?  Should be Version 4.
    Look here http://support.apple.com/kb/DL1420
    Phil
    Message was edited by: w7ox

  • Migration Assistant from Time Machine not working, Migration Assistant from Time Machine not working

    Hello,
    A friend of mine recently bought a new Macbook Pro.  I believe it is a 2.8 Ghz i7 model.
    Anyway, they wanted to transfer all of their stuff from a 5 year old Macbook (running Snow Leopard) to their new Macbook Pro (running Lion) and they asked me for help.  I suggested they run Migration Assistant from a Time Machine backup.  They did that last night and everything ran fine until the very end, when they got this error message "Superdrive firmware Update 2.1 is not compatible with this version of Mac OS X."  Also, it appears that nothing had been transfered. 
    Any suggestions?
    Thanks!

    Thanks a lot both. The thing was that I couldn't find any DVDs that belonged to my new computer, so I just used my old Leopard DVD thinking that it didn't matter which one I used anyway. When you said it did
    matter, however, I looked a little closer and found two DVDs in my new computer's box. I'm doing a clean installation as we speak.
    Thank you for your help!

  • Window 8 and Adobe does not work on Internet 10

    I have Window 8 and running Internet Explorer 10 and when I go to a website that need Adobe to run the program, it tells me that I do not have Shockwave is enabled and ActiveX Filtering is not, and I have ran all the test that is aked on the site to check it out and everything is okay.  I am not sure how to get it to work, any ideas?  Runnng 10.1.5 Can anyone help me out?

    Could you verify that you are using the desktop mode of IE and not the modern version?
    http://forums.adobe.com/message/4814662#4814662

  • Sync files service and Adobe Typekit not working (coming soon message)

    Hello there,
    About a month ago I started as a new member of Creative Cloud, the apps are working fine, but I still get the "comming soon" message for the "File Sync" service and the Adobe Typekit. When am I going to be able to use these features? Is there something I have to do to "enable" it?
    Thanks!
    Rodrigo

    Just received this message
    You’re in! Get started with Fonts and Files
    We’re excited to offer you early access to Creative Cloud file and Typekit font syncing. This will bring the files you store on the cloud—and the fonts you use on the web—to your desktop for use in the apps you work with every day.
    Ready to begin? If you don’t already have the Creative Cloud desktop app, grab it from the Download Center—it’s free with your membership. Next time you launch the app, go to the Files and Fonts panel to start syncing.

  • I recently bought a new macbook pro and set it up using the migration assistant and my mac mini.  I can't get the text message forwarding feature to work with both computers.

    I recently bought a new macbook pro and set it up using the migration assistant from my mac mini.  I can't get the text message forwarding feature to work with both computers.  It keeps saying that I only have 2 devices setup, my iPad and my macbook pro.  When I mess with the setting on my mac mini, it goes from saying that that is one of the devices to my macbook pro being the 2nd device.  I think that something happened as a result of my using the migration assistant and now it thinks that my macbook pro and my mac mini are one and the same computer.  Any ideas?

    Thanks, Sig.
    The old computer is a 2.6 Ghz Intel Core 2 Duo
    The new one is a 2.3 GHz intel core i7
    In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem.  Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page.  Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
    If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them. 
    (I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.)

  • I downloaded Lightroom version 5.7 in order to support tethered capture on my Nikon D750 and its still not working. Additionally when I was prompted to give my serial number for the update it was no where to be found on my Adobe profile although I purchas

    I downloaded Lightroom version 5.7 in order to support tethered capture on my Nikon D750 and its still not working. Additionally when I was prompted to give my serial number for the update it was no where to be found on my Adobe profile although I purchased, and am paying monthly for my creative cloud for photography. Please help

    Does your Cloud subscription properly show on your account page?
    If you have more than one email, are you sure you are using the correct Adobe ID?
    https://www.adobe.com/account.html for subscriptions on your Adobe page
    If yes
    Some general information for a Cloud subscription
    Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
    Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
    -Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
    -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
    -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
    -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
    If no
    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • I used migration assistant and my ethernet cable to move data and apps from my 5-yr old Intel-based iMac to my brand new Intel-based iMac running OS Lion.  The old machine was running OS 10.5.8.  Not all my files transferred (or I can't find them).  Help

    I used migration assistant and my ethernet cable to move data and apps from my 5-yr old Intel-based iMac to my brand new Intel-based iMac running OS Lion. The old machine was running OS 10.5.8.  Not all my files transferred (or I can't find them).  I've seen recommendations to select the old computer in System Preferences, but that didn't work.  Help.  Thanks!

    IMO, wrong choice. Start over, using a FireWire cable and following the steps in Pondini's Setup New Mac guide.

  • License not working after migrating to new MacBook Pro

    I migrated recently to a new MacBook Pro. Aperture is finding it hard to recognize my license from earlier MacBook Pro
    Aperture license shows blank. Asks for license. Does not accept my Aperture 2 or 3 license.
    Do I have to ?
    * Backup my data
    * Uninstall Aperture 3 that was migrated
    * Install Aperture 2 again
    * Put license
    * Apply Aperture 3 upgrade again
    * Open photo libraries to check compatibility
    Any recommended way of handling the license recognition with least hassle?
    Last working setup
    * MacBook Pro Core 2 Duo 2.1 GHz
    * Snow Leopard 10.6.4
    * Aperture 2
    * Aperture 3 upgrade applied to Aperture 2
    Now
    * MacBook Pro i5 2.4GHz
    * Snow Leopard 10.6.4
    * Aperture 3 (Migrated from MBP2.1Ghz)
    Any help would be appreciated.

    Tony Gay wrote:
    Migrating a Pro application will not work, you need to delete the Aperture application, only the ap, from your MBP, and do an install from the supplied disc or download, this should then take you serial number.
    Tony
    I keep reading people state this, but I've migrated a bunch of times since first getting Aperture 1 (or whatever Apple called it). I just did a migration from a 15" MBP (Early 2009) to a brand spanking new 17" MBP i7. Aperture 2 is working perfectly. I'm not bragging or anything, because if something is going to go wrong, it will go wrong with me. Yet, I haven't had any issues with any migration and "Pro apps" including moving iMacs to iMacs, iMacs to MBP, MBP to iMacs, etc etc.
    Now I'm paranoid that Aperture is going to blow up on me next week!

  • I have installed adobe flash player on my computer and this is not working please help

    I have installed adobe flash player on my computer and this is not working please help

    What is your operating system & version?
    What is your web browser?
    What means "not working"; what do you see instead of the expected Flash content?

Maybe you are looking for