Migration Assistant from Tiger Mac to new Leopard MBP can't see disk

Hi,
I just bought a new MacBook Pro and am trying to migrate from my Tiger-based (10.4.10) dual 1 GHz Mac (mirrored-drive door) desktop machine. The boot drive on the Tiger machine is actually partitioned into an emergency boot drive of a few GB and my main working drive ("Macintosh HD"). When I run Migration Assistant (MA) on my MBP (after connecting the 6-pin Firewire cable and restarting the Tiger Mac in target disk mode), the MBP sees only the emergency boot-up partition and not the main working partition from which I want to migrate.
I tried MA on my MBP connected to a different Mac with no HD partitions, and it sees "Macintosh HD" just fine, so I think all the new hardware is okay as well as the Firewire cable.
Any ideas?
-Eric

Thanks for the info. I do know something about this (being a HW engineer), but I would have thought that the IDE master/slave jumpers would affect all the partitions on the disk. Since my emergency-boot partition is visible, I take that to mean that the IDE master/slave jumper issue is a non-issue for me.
I don't know if this helps, but here's what Disk Utility reports about the disk (not the volumes residing on it):
Name : ST380021A
Type : Disk
Disk Identifier : disk1
Media Name : ST380021A Media
Media Type : Generic
Connection Bus : ATA
Connection Type : Internal
Connection ID : Device 0
Partition Type : Applepartitionscheme
Device Tree : pci2/ata-6@D/@0:0
Writable : Yes
Ejectable : No
Mac OS 9 Drivers Installed : Yes
Location : Internal
Total Capacity : 74.5 GB (80,026,361,856 Bytes)
S.M.A.R.T. Status : Verified
Disk Number : 1
Partition Number : 0
Now, onto the partitions which I know less about.
Here's what Disk Utility says about the Macintosh HD partition:
Name : Macintosh HD
Type : Volume
Disk Identifier : disk1s10
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : pci2/ata-6@D/@0:10
Writable : Yes
Universal Unique Identifier : E6E9B335-60D0-3F06-97F9-2A9BAC522106
Capacity : 68.4 GB (73,411,137,536 Bytes)
Free Space : 819.5 MB (859,291,648 Bytes)
Used : 67.6 GB (72,546,123,776 Bytes)
Number of Files : 367,638
Number of Folders : 74,198
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 1
Partition Number : 10
Here's what Disk Utility says about my emergency-boot partition:
Name : Clean Boot
Type : Volume
Disk Identifier : disk1s12
Mount Point : /Volumes/Clean Boot
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : pci2/ata-6@D/@0:12
Writable : Yes
Universal Unique Identifier : 4A704075-200F-3CCB-B8ED-E7FEEDB655EC
Capacity : 5.9 GB (6,345,846,784 Bytes)
Free Space : 3.8 GB (4,133,232,640 Bytes)
Used : 2.1 GB (2,212,093,952 Bytes)
Number of Files : 76,846
Number of Folders : 19,664
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 1
Partition Number : 12
I don't know how to determine from the above what the "first" partition would be. I don't know how to post an attachment here otherwise I'd show a screen shot, but when I got into Disk Utility's partition tab, the emergency-boot partition (called Clean Boot) shows up at the bottom of the space indicating all of the HD's space, and Macintosh HD shows above Clean Boot.
So what are my options? Can I repartition w/o loosing Macintosh HD (I'm willing to loose the other partition Clean Boot)? Any way to change the partition numbers?
I was thinking of cloning Macintosh HD to another HD and then migrating from that. Any experience with that?
Thanks, Eric

Similar Messages

Migration assistant from Old Mac to New(but used) Mac, email recovery.

Recently used Migration assistant (using external as a back-up) to move from an old Mac using Snow Leopard to a new mac using Lion. Lost the use of my entourage with the new Lion OS and I'm swithing to use Apple Mail, but I'm not being successful is transfering my previous mailbox and past emails.
Tried to "import mailbox" from entourage, but I get "Unable to locate Microsoft Entourage mailboxes to import."
Ideas?

FireWire cables are dirt cheap and that's how you should be doing the migration. You might have to start over, wiping the new machine's HD, and restoring the software as described in the Everything Mac manual that came with it. See Best Practices and Setup new Mac for more details.

Problems using Migration Assistant from Tiger to Snow Leopard

I want to scavenge files and apps from a Power Mac G4 (PowerMac3,5) running Tiger 10.4.11 before I turn it out to pasture. Most of them were migrated years ago to another system and have been updated and upgraded over the years, but a few apps have no modern equivalent. Now I want to do one last "pull" to pick up anything left behind all those years ago, particularly apps for which the install discs are in deep storage at best and possibly discarded.
I'm trying to use Migration Assistant in a nearly virgin Snow Leopard 10.6.8 system (installed fresh from 10.6.3 retail optical disc, updated over the network, lightly tested). It has a single admin account, no other user accounts.
Possible complicating factors: the Snow Leopard system is Server running under Parallels 10.1.4 on Yosemite 10.10.2 on an Early 2008 Mac Pro (MacPro3,1) with third-party USB3 controller in a PCI slot.
At present, I'm using a portable drive with both FW and USB interfaces as an intermediate storage (FW on the G4 to clone the system drive, USB on the Mac Pro to connect it to the virtual machine). SL sees the drive just fine, can copy files from it, and can even run apps from it. Migration Assistant sees the drive and offers to migrate from it.
Two problems:
1. No matter what user(s) I select for migration, Migration Assistant tells me it is a duplicate account. Proposing an account name never used before does not help. As a result, no user files can be migrated. (Obviously, I could copy them in other ways, but I think MA should do a more thorough job.)
2. Migration Assistant offers to migrate absolutely no applications. Even applications that SL will run from the drive cannot be migrated. (Some are PPC apps, but SL will run them via Rosetta. Others are Universal apps.)
Am I expecting too much of Migration Assistant?
Is the Migration Assistant shipped with SL Server (and updated through Software Update) not capable of running under SL Server?
Should SL MA refuse to migrate any applications from a Power Mac, even Universal applications?
Am I missing something obvious?
Is there key information I have omitted?

markwmsn wrote:
...It's not the twenty bucks, it's the principle of the thing.
Not sure what you meant by that statement. Although this "principle" may be more important to you than the twenty bucks, I know that my time is worth more to me than your twenty bucks!
What apps are you using?
markwmsn wrote:
I was able to install Snow Leopard (client) in a partition, and it was able to migrate users and many applications from the G4 clone on the portable drive. Some of the apps even run.
Then I went back to my SL Server virtual machine and tried to migrate FROM the SL client partition. Migration Assistant showed the same symptoms as importing from the clone directly (no apps offered, bogus "dup user" errors). I am forced to conclude that either (a) Migration Assistant 3.0.4/1.1 is broken when run on SL Server or (b) my new SL Server installation is broken. I'm either going to have to boot back and forth to run the old apps or find their installation media and reinstall them in my SL Server virtual machine.
Even worse, I realized that one of the antique programs I still haven't dug everything out of is a Classic application that had to be kludged to survive Y2K!
Thanks again, MIchaelLAX.
Anybody else have any clever ideas?
So, glad to see that Migration Assistant did work for you in Snow Leopard...
More clever ideas:
Install Snow Leopard client in Parallels and use its Migration Assistant:
http://forums.macrumors.com/showthread.php?t=1365439
Here is a recent post I assembled for running Classic apps on Intel Macs:
With the newer Intel Macs, you have to run a Classic emulator such as SheepShaver, which requires you to extract the Mac ROMs from your older Classic Mac and then install Mac OS 9.
A related program is Chubby Bunny, which comes bundled with all of that included (google the term "Classic-On-Intel v 4.0.1 chubby bunny").
More information on SheepShaver:
http://www.emaculation.com/doku.php/sheepshaver_mac_os_x_setup
and
http://www.everymac.com/mac-answers/mac-os-9-classic-support-faq/run-macos-9-on- intel-macs.html
and more information about Chubby Bunny:
http://www.macwindows.com/OS9_on_Intel_Mac.html#092408b
and
http://hackthemac.blogspot.co.uk/2008/08/chubby-bunny-old-virtual-machine.html
Here is the Classic CD-ROM version of RISK II running in SheepShaver on my Lion Mac Mini:
[click on image to enlarge]

Can I use migration assistant from a mac with leopard to a mac with tiger?

My old mac was upgraded to leopard, (don't ask me why), and I just got a new mac with tiger, although I ordered leopard up to date. Can I use migration assistant to move stuff from the old mac with leopard to the new mac with tiger, or do I have to wait until I get the copy of leopard? Plus, if I move files over now- like through email and/or network connection, and then when I get leopard and archive and install, what happens to my files?

That is correct. You'll need either an ethernet cable or a firwire cable and a firewire to thunderbolt adapter to connect the two macs together. Here's info on Migration/Setup assistant
http://support.apple.com/kb/HT4889?viewlocale=en_US&locale=en_US

Just used migration assistant from one mac to another one. When I restart the new mac, the old user boots up instead of my new user. Have to log out then log in.

Just got a new Imac. I migrated from the old Imac. When I boot the new Imac, the old user screen boots up. I have to log out and then log into my new user on the new mac. Whats up?
Thanks.

Thanks for your help. But the PowerBook has a Migration Assistant designed for the purpose of transfering files from the old Mac to the new Mac. The steps take me to the point where I'm instructed to restart the old Mac while holding down the "T" key. But nothing happens when I do that. It just restarts and the Migration Assistant on the new Mac still reads "waiting for old Mac to restart".
There has to be a way to do this. I can't install the original applications on the PowerBook from scratch because they were meant to run on Classic. The PowerBook doesn't recognize any of the old Classic installation disks I have from previous Macs (Oddly, the PowerBook has capability to run Classic, but not the actual software-- and no Classic installation disk was provided, unlike the software provided for iBooks. And I can't install any of the System X upgrades because they need to recognize the original application already on the computer in order to upgrade.
I just calculated that if I have to rebuy all the applications I need, I couldn't afford to do it (unless someone can-- or even wants to-- take the old versions off my hands to offset the cost of buying new ones).
There must thousands of graphic designers like me who run a small business and can't afford to re-stock their entire software collection every time they upgrade to a new computer. Why would Apple diss the very people who have been supporting the company (actually keeping it alive) all these years? I don't think they would do that. I'll just have to keep looking for a solution.

Migration Assistant from old iMac to new iMac

I have just purchased a new iMac and on startup the setup assistant allows me to move all my data and setup from my old iMac to my new iMac. However when I start although both iMacs seem to acknowledge each other the transfer does not occur.
I new iMac asks me to install sharing software which I have done successfully.
The new iMac gives me a number to enter onto the old iMac via Migration Assistant. The old iMac finds the new iMac and asks for the number. Upon entry the new iMac moves from 'Searching for computers' to 'Preparing information' but then after about 10 minutes says 'Error connecting to network'.
The new iMac is connected to my router via an ethernet cable, my old iMac is connected to the network via wireless. I don't have a firewire cable to use.
Any help appreciated.
Message was edited by: Guy Emerson

FireWire cables are dirt cheap and that's how you should be doing the migration. You might have to start over, wiping the new machine's HD, and restoring the software as described in the Everything Mac manual that came with it. See Best Practices and Setup new Mac for more details.

Cleanest way to migrate date from old mac to new

Getting ready to purchase a new imac. Im wondering what route to take to more my data over. Id like to make sure the new machine stays as clean as possible and not carry over any potential issues. Does migration or setup assistant filter out unnecessary or even conflicting files? Is it better to move individual files and if so can i do this using Time Machine? I have both a time machine back up as well as CCC back up to choose from also.

Use the Setup Assistant during your initial setup of the new computer. You will need to connect your old computer to the new computer to do this. You can do this using a current Time Machine backup of the old computer if you can connect the backup drive to the new computer. See Target Disk Mode and About Windows Migration Assistant.

Migration Assistant (from old mac)

Hello all,
I just migrated my old data to my new Macbook Pro (from a Macbook) and I have noticed in the Macintosh HD there are some additional folders. Kind of duplicates. These folders are:
Developer (from old mac)
opt (from old mac)
home (from old mac)
backup (from old mac)
I know these are from the migration I did. But I am not sure how my current system uses them. Some are in fact empty (except the Developer and opt) But my question is can I delete these without causes any issues? Or is it best to just leave them alone.
Any suggestions, thanks

Welcome to Apple Discussions,
As long as they are marked from old Mac you can safely delete them.
The best time to migrate is when you first boot your new Mac, if you migrate at a later date you can get duplication, or even a new Home folder.
-mj

Mac with new drive/system can't see Time Machine backup.

The drive on my wife's MacBook Air went bad and we got it replaced at the Apple Store. She started the Air, went to restore her files from her Time Machine/Time Capsule backup and her backup was not listed.
Then we tried again and the migration assistant says 'connection failed.'
I checked the volume from my Mac and the 'sparsebundle' is on the Time Capsule.
Any ideas?

This is a guess, but I'd try mounting that "sparsebundle" before you launch Migration Assistant.
If that doesn't help, check item #19 of Time Machine FAQ.

Just Migrated Files from Old Mac to New MacBook Pro and Can't Open PDF File

Does this computer come with Adobe reader pre-installed or do I need to down-load it from Adobe?
Thank you.

If you want Adobe Reader, you'll need to download it. Even if it's already present on your hard drive, you'll want to have the latest version, and the preinstalled version (if there is one) probably isn't it.

Can you home share from a Mac to pc? I can only see the music list on the pc; it won't drag or copy to pc.

Can you home share from a MacBook to a pc? I am only able to see the music list. I can play the music but it won't copy or drag to the pc. Thanks!

http://support.apple.com/kb/HT3819 Are both computers activated on your account?

I recently bought a new macbook pro and set it up using the migration assistant and my mac mini. I can't get the text message forwarding feature to work with both computers.

I recently bought a new macbook pro and set it up using the migration assistant from my mac mini. I can't get the text message forwarding feature to work with both computers. It keeps saying that I only have 2 devices setup, my iPad and my macbook pro. When I mess with the setting on my mac mini, it goes from saying that that is one of the devices to my macbook pro being the 2nd device. I think that something happened as a result of my using the migration assistant and now it thinks that my macbook pro and my mac mini are one and the same computer. Any ideas?

Thanks, Sig.
The old computer is a 2.6 Ghz Intel Core 2 Duo
The new one is a 2.3 GHz intel core i7
In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem. Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page. Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them.
(I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.)

How can i use migration assistant from a Power PC G4 powerbook?

How can i use migration assistant from a Power PC G4 laptop that can't run 10.5 to a new mini running Lion? Mini's MA says I have to upgrade the laptop's MA but the upgrade requires 10.5 as a minimum
help,please
jan

That is correct. You'll need either an ethernet cable or a firwire cable and a firewire to thunderbolt adapter to connect the two macs together. Here's info on Migration/Setup assistant
http://support.apple.com/kb/HT4889?viewlocale=en_US&locale=en_US

How to use Migration Assistant from OS 10.7.5 mac to new mac Maverick?

Got a new imac. I'm trying to use Migration assistant from my non-Maverick imac to the new one. I'm told that I have to update my former mac, but it's too old to update to Maverick.
So, how can I use Migration Assitant to transfer files?
Thank you.

The easiest method is to use the Time Machine backup from your old computer and connect it to the new machine. Then launch Migration Assistant on the new machine and use the TM backup HD to migrate to the new machine. DO NOT do this wirelessly, your profile indicates you have a Time Capsule, if you use that for your TM backup then connect it via eithernet to your new iMac to do the migration.

HT1277 Mail has gone crazy. Header's and messages are mixed up. New Mac Book Pro. Migrated files from Time machine running snow leopard. Reinstall or new computer needed?

Mail has gone crazy. Header's and messages are mixed up. New Mac Book Pro. Migrated files from Time machine running snow leopard. Reinstall or new computer needed?

Ok; I'm not sure what you're doing. 36 hours is rather long. Seems like a new migration. Not what I intended.
Here's what I intended: from the newly-migrated and apparently-corrupt environment, create a new user, not related to any existing user, nor any migration-created user, or any other user for that matter. That is, use  > System Preferences > Users and Groups, authenticate yourself by clicking on the padlock, and then click the + and create a wholly new user. Then log in under that user and establish the mail access.
36 hours? I'm wondering if there's an error or an exceedingly slow network here? Or a really, really slow disk? Or a sick backup? (WiFi isn't the path I'd usually choose, either.)
Failing the attempted second migration, I'd try a different tactic. Does your existing (old) system work? If so, I'd bypass the backup and connect an external (scratch) USB disk drive to the (old) sstem and then boot and use Disk Utility booted from the installer DVD disk or boot and use Disk Utility from the recovery partition or booted from a recovery partition created on some other external storage (details here vary by the OS X version and what hardware you have), and perform a full-disk backup of your original internal disk to (scratch) external storage. (Make sure you get the source and target disks chosen correctly here; copying the wrong way — from the scratch disk to your existing disk — will clobber your data!) In esssence, this will clone your existing boot disk. Then dismount the (formerly-scratch) external disk, transfer it over to the new system, and use it as the source of the migration, by performing a fresh OS X installation on the new system.
Target Disk Mode is also sometimes an option for accessing the disk for a migration, but that requires the right cable, and requires systems that have the same external connection; newer MacBook Pro systems use Thunderbolt for this, and older systems tend to use FireWire. And I'm guessing you don't have compatible hardware.
The details here can and do vary by your OS X versions and your particular Mac systems — if you'll identify the specific models and hardware, somebody might be able to better tailor the above (fairly generic) sequence to your particular configuration.

Migration Assistant from Tiger Mac to new Leopard MBP can't see disk

Similar Messages

Maybe you are looking for