Migration assistant has been stuck for at least 5 hours
I was transferring files on my G4 from 10.4.11 to my new 10.5 leopard and everything seemed ok.
Now, it's been stuck showing "transferring files from User Mary X- 1 hour, 13 minutes remaining"
and it's ben like that for at least 5 hours
anything I can/should do to help it along?
To be clear, it has said, "1 hr. 13 mins. to go" for the last 5+ hours ??__ indicating nothing is happening ??
Is this correct ??_____
"Different drives in the same Mac "
Are they on the same ribbon cable, as master and slave / cable select ?? ______
Are they jumpered properly for each position ??______
Or do you have some other arrangement like one of the plugged into a card in a card slot ??______
Similar Messages
-
how do i stop the ios 7 update;"verifying update" has been spinning for at least 7 hours.
tanyanakai wrote:
How do you get the ios 7 update for ipod touch 4?
You cannot. the iPod Touch 4th Gen is not compatible with iOS 7.
See the very end of this link for Compatible Devices and Features...
http://www.apple.com/ios/ios7/features/ -
My IPhone has been charged for at least 3 hours still showing the low battery icon and not turning on, normally when my phone is in low battery it will automatically pop up the apple icon but now it's not turning on someone pleaseeeee help me! Thanks!
Hi Windy08,
If you are having an issue with charging your iPhone, you may want to start your troubleshooting with the steps in this article -
If you can’t charge your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L -
whilst downloading the update to my ipad a screen is up ..the power plug a small arrow above and the itunes logo above that.. it has been there for at least 2 hours... why?? ..or what to do??
wellllll.... it was fixed in 15-20 min at the store.... using the same method you suggested ...go figure.... perhaps my wi-fi was a bit wobbly.... who knows.... most of the info was restored through the cloud... lost my pics, but thats not crucial......they are all elswhere... so your tip was spot on, and i appreciate you help.... thanks again !!
-
My iPod 4th gen has been broken for at least 2 years, the screen is broken so it won't sense me touching it but it still turns on, I have heaps of photos and vidios I would like to look at but my laptop that it was synced to is broke, I also have a pass code on my ipod. Is there anything I can do!
Photos
- If they are in an iPod backup then restore another iPod, iPhne or iPad from that backup. See the restore topic of:
iOS: How to back up
- Maybe from the restored iPod via
How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official
http://www.amacsoft.com/ipod-data-recovery.html
iPod recovery software to restore lost music files
-iPod touch Deleted Photo Recovery Tips You Should Know
To restore the iPod:
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
You can also contact a Data Recovery Company -
Update statement is taking for ever, has been running for the last 6 hours.
UPDATE PRODUCT_INTERIM A
SET PRODUCT_ID =
SELECT MAX(PRODUCT_ID)
FROM PRODUCT B
WHERE B.CHAIN_ID = A.chain_ID
AND B.x_id = A.x_id
WHERE EXISTS
SELECT '1'
FROM RET_PRODUCT B
WHERE B.CHAIN_ID = A.chain_id
AND B.x_id = A.x_id
Oracle Experts, The above query is taking for ever and ever. We do have 11 million records in product_interim table, for those 11 Million records, this query has been running for the last 6+ hours...in OEM, it still says, 89% percent completed and 2 hours waiting time.. it always shows 2 hours waiting time...
Can you guys give some ideas to get this run fast....Your time and help would be greatly appreciated...>
Oracle Experts, The above query is taking for ever and ever. We do have 11 million records in product_interim table, for those 11 Million records, this query has been running for the last 6+ hours...in OEM, it still says, 89% percent completed and 2 hours waiting time.. it always shows 2 hours waiting time...
Can you guys give some ideas to get this run fast....Your time and help would be greatly appreciated...
>
Don't do anything yet!
Let it keep running until you know that you REALLY want to stop it. If you think the UPDATE is slow the ROLLBACK if you kill it may take much longer.
Now - how do you plan to get it to 'run fast' when it is already running? If you do a ROLLBACK the time it takes to apply the UNDO could take even longer than the time it has taken to get this far with the update. And if you interrupt the ROLLBACK you will have to do a recovery from backup. Don't go there.
Read the FAQ at the top of the thread list for how to post a tuning request and the info you need to provide. Some of that info is:
1. Ask for help BEFORE you start running the query. Once you start you should usually just let it finish.
2. Always provide your 4 digit Oracle version
3. Provide table and index DDL
4. Provide row counts for the table and for the query predicates
5. Provide info about the exact command you used to collect stats and say if the stats are current -
Your account has been locked for the next 3 hours due to
I am posting this message on behalf of people unable to access the site due to locked account status.
I have few co workers in my office getting error "Your account has been locked for the next 3 hours due to
too many invalid login attempts. Please try again later.
". They are trying to access the site with valid userID and Password. Is it possible to do a global check for this issue.
Thanks,
RJIf your account is locked you cannot edit your personal information, make purchases, or access iCloud or MobileMe.
See this for what to do: "This Apple ID has been disabled for security reasons" alert
appears, http://support.apple.com/kb/TS2446 -
My kids ipod touch 4 has been missing for 2 months I tried the find iphone app but her battery is dead so I get no sound or signal, is there any other ways to find it??
Only the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it.
- Apple will do nothing
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number -
Can anybody tell me how to unstick an update which has been like that for a month. It's says installing but won't budge.
Have you tried any of these things?
Tap the "installing" icon and see if you can pause it. If it does pause, then tap it again and see if it will resume.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. That might start the download again.
Make sure that you do not have a stalled download in iTunes. That could prevent the app from installing.
You can also try deleting the installing app - tap and hold down on the icon until it wiggles - the tap the X on the icon to delete it. Then try to download again. Apps may also be able to be deleted in Settings>General>Usage>Storage if you cannot get the X to pop up on the icon.
If none of those things work for you, download the update in iTunes on your computer and then sync the app to your iPad. -
I'm wondering if anyone else has had this happen or maybe can offer a solution. I have several Dynamic XML forms designed in LiveCycle ES2 v9 that since our ministry switched to Reader X have been failing. At first, the save button greys out (even though new information has been inputed) and the form will only save as. Then the save as function will start to fail if the form is left open.
Our users are running Reader 10.1 on Windows Vista and so far its only users that have left it open longer than two hours, or over night. These forms have been Reader extended and at first save without issue.
Unfortunately, just telling the users not to leave it open isn't an option. We just need Reader X to work.
Thanks in advance for any information you can share about this.
~ConnieHi Kyle,
Yes there is a lot of code within the forms. Mostly adding instances, and changing the presence on subforms. These particular forms do not have data connections, or execute any code from a server. The script all runs at the client level.
I'm checking with the form content owners to see if I'm allowed to post any of them. If they give the okay then I'll put a sample up here.
~Connie -
IMessage has now not been working for at least 24 hours
It won't let me send ANY IMessage messages to ANY of my iPhone contacts at all and having to send them as texts, it's been doing this for 24 hours, and I can't deal with it!please help :( it's getting frustrating, as now I've had arguments with people as they are wondering why I'm not replying as I have had no signal or no iMessage to be able to send.
Thankyou for helping me, however I've woken up this morning and iMessage seems to be working again (touch wood!) hopefully it was just a glib, if it happens again I will try your method :) I've always been connected to wifi wherever I was or 3G at least.
-
i had restore my ipad to ios 7.0.4 but after few days the safari got crashed so i tried to restore it but it asked for icloud account password which i forgot so i erased and restore my ipad again but for activation it asked for the icloud password again please help? thank you
Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818
jake7832 wrote:
i had restore my ipad to ios 7.0 ... it asked for icloud account password which i forgot so i erased and restore my ipad again but for activation it asked for the icloud password again ...
Without that Password you will not be able to re-activate it.
Removing a device from a previous owner’s account
There is No workaround. -
Sorry... I just figured it out. I had to go into Computer then eject it from there then just plug it in again. Sorry
Message was edited by: bobertoqPhotos
- If they are in an iPod backup then restore another iPod, iPhne or iPad from that backup. See the restore topic of:
iOS: How to back up
- Maybe from the restored iPod via
How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official
http://www.amacsoft.com/ipod-data-recovery.html
iPod recovery software to restore lost music files
-iPod touch Deleted Photo Recovery Tips You Should Know
To restore the iPod:
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
You can also contact a Data Recovery Company -
i got a new screen on my iphone 4 it had 35% battery left i can hear people ring but i cant do anything with it it happeed yesterday ive tried the on and off and snooze but still wont work any ideas anyone please?
Hi,
Yes i understand this but most electronics that fail, will fail during the very early stages of there life. It sounds like either the screen or one of it's associated components has failed again.
Of the many screens i have changed i have had three dead out of the box and two failed within the first week of operation.
They make them in huge numbers and work on a known failure rate for all screen panels large and small.
Cheers! -
Somebody please give me an idea involving no loss of information
Thank youThank you very much for all your help lex schellings this solved my problem
Thank you very much again :-D
Maybe you are looking for
-
Disk Images will not mount and Disk Utility will not runru
I am having some major problems with Disk Utility, Disk Images, and software update. First, Disk utility will not open or run. When I double-click the application icon, nothing happens, no message, nothing. I am running OSX 10.4.11. I have deleted di
-
LabVIEW 7 express for Gentoo Linux
Hi guys I have Gentoo distribution and I want to install LabVIEW 7 on it I have tried but could not do it successfully can anyone tell me what do I need to have Lab View installed like if I need rpm etc, which ofcourse I do not have , any suggestion
-
In iPHOTO I can highlight a photo to include in an email, but after I select the a photo, the "choose" box will not darken to let me choose that photo or any of my original photos to put them in an email or even to copy and paste them else where. The
-
SQLException [Microsoft][ODBC SQL Server Driver] Function sequence error
I get this message when trying to write to a column of type 'IMAGE' on SQL Server 2000 when the size of the file I am trying to write is 0. PreparedStatement ps = con.prepareStatement( "UPDATE " + dbSchema + "File set filename = ?, filetype = ?, file
-
MRBR Report- Price and qty variance tables/structure/Function module
Hi I am in the process of developing a customised report similar to MRBR report. I am not very clear on the logic used for "Difference Qty" and "Difference Value". MRBR is taking values from strucrure ARSEG. Is anybody aware if there are any tables f