Migration Assistant is not assisting

Hi gang.
Ran mingration assistant to brin in old data into my new 24"...
When I did, MA asked me to rename my old computer, which I did "kids".
So now.. on my 24".. if I use "kids" login.. everything is there. If I log in as me, I have nothing but clean slate.
I only want one use account on the 24".. but have my old data.
Secondly.. iweb doesn't seem to load in either account.
Frank

I solved the problem myself. the fact that the techs at Apple could not figure this out, and I could, is a testament to their lack of training in my opinion.
After I got my iMac back from the Apple store, I had to erase it and re-install all the software since it was such a mess from the botched transfer they did. What ended up working was to NOT check the box for "files & folders" in the migration dialog box. There are four choices for migration including the administrator/user settings, the network setting, the applications and files/folders. When I did not try to transfer the files and folders, everything worked fine and all of my files and settings were right. Apparently the "files and folders" are something other than regular files and folders since all of my documents and folders transferred. I hope that no one else has to go through this!

Similar Messages

  • After a Lion clean install, how do I retrieve my data from external back-up? Following Apple advice for use of Migration Assistant did not work creating similar issues leading to clean install.

    After a Lion clean install, how do I retrieve my data from external hard drive?
    Following Apple advice I used Migration Assistant which crashed new system twice which is why I had to clean install Lion in the first place.
    Is there a sure way of doing it?
    I have only a few programs that I will have to install myself and that should not be a problem.
    I just want my data, music and photos back where I can use them.

    Time machine backups. I went to migration assistant a few hours ago and limited my selection to "users", no need for applications, settings and other files.  Stuff started moving over at a fast pace but has now seemed to stall.
    I will let it run overnight as there are lots of songs and photos as well as a few movies.
    If that does not work, then I will go into TM and try restore. I have restored some things in the past such a mail files and it has worked well. 
    The Apple fellow at the store told me to go right into TM, he may have had a point. I'll get it eventually.

  • Computer not responding during migration assist

    I bought a 27" iMac and have been trying to use migration assist to transfer my files and settings over from my 17" MacBook Pro with little success.  The iMac recognizes the MacBook and the confirmation code pops up on both but once the migration begins, the iMac has a message pop up that says the MacBook is not responding, even though it has a message saying that the iMac is ready. 
    I've tried searching other posts here but can't seem to find any with the same issue.  Any suggestions would be appreciated.
    Thanks.

    Well, I was following the instructions as they were presented on the screen.  As I mentioned, things seemed to progress normally, the two computers seemed to be communicating but then the message that the MBP was not responding would pop up and I would be forced to quit the migration.
    I had tried both FW 800 and ethernet connections to no avail.  After updating the iMac, I am running Mountain Lion on both machines and had consulted Pondini's guide prior to posting here.  I also opened up all the sharing options I could find on both computers thinking that would help. I'll take a closer look at Pondini's guide and see if that provides some answers.
    Thanks.

  • Migration assistant screw up, Mac Pro not seeing wifi/TC

    Hi
    I've been using a MacBookPro (MBP) for almost 5 years now, with a 1TB Time Capsule (TC1) using Time Machine (TM). I am the sole user, HDD is 270Gb used/50Gb free; using Mavericks, v10.9.2. On Friday, I used Sophos anti virus home edition, to scan the MBP. It comes up with no threats identified, and I uninstall Sophos.
    Yesterday I took delivery of the Mac Pro (MP) with the 3Tb Time Capsule (TC3).
    I booted up the MP, with the TC3. I did not, at this stage, connect the TC3 to the internet. Using TM, I backed up the MP. TC3 flashes the amber light.
    Using Migration Assistant (MA) I tried to copy the MBP to the MP, 3 times. This did not work. At the point where the target machine has listed what is available to transfer, I click Continue and MA on the MP closes, on the MBP it says something like connection lost. The screen where this happens, lists 3 items available to transfer Application, Documents/Date and Computer settings; with a content of 128kb indicated, which is clearly wrong! The connection was an Ethernet cable direct from the MBP to the MP.
    At this stage, I decide to connect the MP to the internet using TC3, there's some settings to be changed on TC3 using Airport Utility and it connects ok. TC3 has a steady green light.
    I run 2 software updates on the MP. I surf the net briefly, to make sure it's ok.
    I try again to use MA. This time, the dialgoue box listing what's available to transfer is different. There are 2 or 3 more options, colour is present, the font is different, the box is about the same size. The MP would not let me take any screenshots as all other applications are closed when MA is running. I don't think it gave me the size of what was being transferred, but it looked more hopeful, so I Continue and the transfer starts, with an estimated time of 33 minutes.
    The transfer completes.
    The MBP, as you would expect, has not changed, the MP has, but not in the way I expected. Applications appear to have all transferred (without checking them), no Documents/data and no Downloads appear to have transferred; I ticked to transfer everything.;I know I can reconnect the Ethernet cable and simply copy the data across.
    But the main problem appears to be, the MP does not see the wifi.
    Ethernet cable is removed.
    The MP asks if I want to give permission to eeEvents manager (I presume calendar related) and say yes. It also asks if I want to install a Java run time, no.
    In System preferences/Network it tells me a new Thunderbolt bridge has been found and asks if it's ok, to accept it, yes. It tells me the Ethernet cable is disconnected, rightly so; it says Airport is not connected.
    I open Airport utility, no sign of the TC1 or TC3 despite it searching. Apart from TC1, the MP, MBP and TC3 are sat within a couple of feet of each other.
    I turn on TC1/TC3 (separately and not at the same time, then at the same time), but the MP does not see them. I've reset TC3, rebooted the MP and still the MP does not see it.
    I don't get any errors or warnings coming up.
    I think my next option is to try and reset the MP to the factory settings, but this won't work, as I've no internet connection to reinstall OS X. No disc is sent with the MP.
    Any suggestions as to what to try? Otherwise, I'll be off to the Apple Store tomorrow for a One to One!! :-(
    Thanks for any help and Happy Mother's Day!!  

    Take the MP and connect it via ETH to your main router.
    Restart the machine holding down command option R, you should see a spinning globe
    Open disk utility and reformat the MP HD as Mac journaled
    Then install OSX on this drive

  • Migration assistant added second user did not merge data: iTunes

    I set up my new mac at the store then came home and connected my OLD iMac to the new via Firewire. I used Migration Assistant, and the migration took about 90 minutes. When it was done I had two parallel usernames; my old username with the old desktop look and stuff and the new computer's username I set up with the clerk at the Mac Store. Now I have two separate users on my computer, complete with two separate iTunes. When I look in the finder under Macintosh HD/Users, I see an icon for the new user (the little house) and a folder labeled with the old username but it has a red "negative" circle over it (like a push icon on an iPhone, but with a minus sign in the middle), plus a Shared folder.
    The weird thing is that all the documents and stuff merged, but I have to go to the old user to use iTunes. My old computer did also have 2 users (why? I have no idea) and it brought the iTunes library I did not use in, but not the massive library I do use in. I teach a fitness class and have about 100 unique playlists and ALOT of music on that thing - but the wrong library was brought in. Now I have to switch back to the old user to use iTunes and that just seems silly. I have tried 'add to library" to try to bring the stuff over but it can't see into the other user I guess.
    Any suggestions? It is so frustrating that my whole library is there but I can't access it on the new user after spending all that money.
    Thanks!

    Read here on why a second user was added and how to remedy.
    http://web.me.com/pondini/AppleTips/SetupAsst.html
    Regards,
    Captfred

  • 10.5 Time Machine backup not visible in 10.6 Migration Assistant

    Hello everyone,
    Helping my not-so-tech savvy auntie move over from her old 5,1 iMac to a newer 8,1 MacBook. Her old iMac has a Time Machine backup on OS 10.5.8. I plugged in the Time Machine to the new MacBook (which is on a clean install of OS 10.6.8) and for some reason the Migration Assistant is not picking up the Time Machine in the "Select Your Disk" section. All I can see is the MacBook's internal HD. The Time Machine backup is showing up in Finder, however the disk's icon is yellow, not Time Machine green.
    I'm a bit stumped - can someone please advise? By all indications, a 10.5 Time Machine backup should be able to restore to a 10.6 system. We are visiting for the weekend and I really would like to get her up and running before we leave tomorrow.
    Thanks!
    VIkki

    Yes, that's option B as she still has the IMac but I'm curious as to why the TM backup isn't working - just in case I need to do this on another machine down the road, it would be nice to know what's going wrong with the more convenient TM restore option.... Thanks!

  • Safari and iTunes will not open on my Macbook Air after Migration Assistant

    I did the Migration Assistant via wireless (from Macbook Pro TO Macbook Air) last night and it did work. However, my Safari and iTunes will not open on my Macbook Air now. The error messages are as follows:
    Safari: "Safari quit unexpectedly. Click Reopen to open the application again. Click Report to see more detailed information and send a report to Apple."
      - I tried reopening the app, restarting, and shutting down the computer. Nothing has worked.
    iTunes: "The file 'iTunes Library.itl' cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?"
      - I clicked "Download iTunes" but then another message comes up that all my software is up to date.
    Any help is very appreciated.

    Try repairing permissions using Disk Utility.

  • HT4889 Am I wrong or does Migration Assistant not work in Mountain Lion (10.8.2) when migrating from a PowerPC running Tiger (10.4.11)? Apple really needs to get on the ball or face losing people buying their new desktop products.

    The title alone speaks to my frustration about this issue.
    Used the process that was recommended by Apple to migrate from my "Lampshade" iMac (PPC running 10.4.11) to the new iMac (Intel running 10.8.2) and I got bupkiss...
    Just a spinning wheel (not beachball) and no drive recognized using Migration Assistant for both nor when using Target Mode on the iMac running 10.4.11 and Migration Assistant on the iMac running 10.8.2. Which is ironic, or more accurately oxymoronic, since the iMac in Target Mode (10.4.11) is recognized on the desktop of the iMac running 10.8.2 but not in the Migration Assistant. And before you can misdiagnose..it is not the Thunderbolt connection since I have the Apple recommended Thunderbolt to Firewire adapter and also used the Firewire 400 to 800 cable to expedite the transfer.
    On a personal note...
    I'm not bashing Apple for this...they are "head and shoulders" above the competition in what they do but I've been burned a few times so I feel I can share a small bit of loyal customer advice...I understand your iOS and mobile products hold huge sway in company focus and market-share but I find it a tad unwise to slack on the desktop applications. I don't recall any app for the iPhone/iPad family being made on the iPhone/iPad...only from desktop applications if I recall correctly. And how can I clearly "Move my Mac even further ahead"  as your marketing states when I can't even migrate my files from my old Mac to my new one in a simple fashion as per your instructions?
    I thank anyone in advance with an answer or even a workaround for this issue and please have a great day.

    http://support.apple.com/kb/ht4889
    Migration from Mac OS X v10.4 Tiger to OS X Lion
    Migration from Mac OS X v10.4 computers to OS X Lion over your Wi-Fi or a wired network is not supported. However, if both Macs are equipped with a FireWire port, you can use Target Disk Mode to transfer your data:
    Verify that both Macs are equipped with a FireWire port. Note that different model Macs may have different FireWire connectors, which will require an appropriate cable, such as FireWire 400 to FireWire 800.
    On the Mac you want to transfer data from, Restart, and immediately hold the T key.
    Wait for the FireWire logo to appear on the screen.  If it does not, restart and try again.
    Connect both Macs via the FireWire cable.
    On the Mac you want to transfer data to, Open the Migration Assistant application.
    Select the option "From another Mac, PC, Time Machine backup, or other disk" and click Continue.
    Select the option "From a Time Machine backup or other disk" and click Continue.
    Select your other Mac's volume, such as "Macintosh HD", from the list, and click Cont
    EDIT: Actually I realize you did follow these directions and if your drive is seen on the new Mac it should work. You're entitled to free Apple support with the new purchase, I'd give them a call.

  • I'm attempting to transfer files, address book, etc from an external hard drive to my new Mac-mini using migration assistant.  The external drive is showing up on my desktop but Migration Assistant is not seeing the drive when searching for devices

    I'm attempting to migrate files, address book, maile, etc to my new Mac Mini using an external hard drive and Migration assistant.  I followed the instructions on using Migration Assistant to do this but Migration Assistant is not seeing the external drive, which is displayed on my desktop

    I've been chasing this problem all afternoon. I had to reformat my internal drive on my MBP and reinstall Mountain Lion   Start up assistant wouldn't see my extrnal drive with the Time Machine files on it.  After many tries, I skipped the restore there and let the system boot.  I could see my external drive from Finder and the files looked OK.  I was told to use Migration Assistant and it had the same problem.
    I saw a hint on one of these posts that the icon that you see and is label Macintosh HD is actually your backup disk and it is telling you that it has a copy of your internal Macintosh HD.  I went ahead and told it to continue and it started to restore my apps, settings, and documents.  It's been going for a couple of hours, and is close to being done.  I expect to see my old system restored when it is finished.
    Wish that Apple would put some type of note that it is seeing the backup. That is most confusing and seems to be a problem for lots of users.
    It's been a month or so since your post  Did your get it to work?

  • How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

    How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

    How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

  • Transferring from one mac to another not using migration assistant I wish to use a EHD and only select what is transferred - in particular my settings etc. How do I go about it. thanks

    Hi,
    I have bought a new iMac but want to select specific data to transfer to the new one. I believe Migration assistant does all or nothing. I have an EHD and have done iTunes and iPhoto.
    I also would wish to have a similar setup (all the passwords, screen savers, and users etc the same) but not mail and some others. Some, on my old machine like Time Machine and Mail were corrupted? and apple not been able to fix.
    How do I go about it.
    Thanks
    Pat

    http://support.apple.com/kb/HT4413?viewlocale=en_US
    http://support.apple.com/kb/TS1963
    Troubleshooting Firewire target disk mode:
    http://support.apple.com/kb/HT1661

  • Transferring iMac 27" to my Macbook Pro and not using Migration Assistant?

    Hello,
    I have my new iMac all set up and used Migration Assistant from my old iMac but created a new user account when I first set up my iMac and chose the do not migrate option. I didn't have the right Firewire cord so had to use Migration Assistant to transfer over after I was all set up with internet.
    My new iMac is all up and running and I'd like to now migrate all my files to my Macbook Pro without doing it wirelessly (as it took over 24 hours to do last time). I'd like to transfer over files using my external hard drive.
    elmac gave me some information in regards to another question which I edited here:
    Hi, I use both TM & SuperDuper (2 different EHD's) I copy from SuperDuper (updated daily)(My Home Folder) iTunes you can enable sharing between computers and transfer that way..Photos from iPhoto Library..dragNdrop I use my Network, not as fast as FW..but easier on the mind. When I unpack my mac, I just set up with my email & Apple passwords..After that I repair Permissions then go about transferring.
    Can I just transfer my home folder called Tuley from the main hard drive on my iMac to the user account section on my new Macbook Pro? Then I can transfer over the itunes folder etc.? I just want to make sure I'm doing this right.
    Message was edited by: spiralgirl

    Can I just transfer my home folder called Tuley from the main hard drive on my iMac to the user account section on my new Macbook Pro?
    Creating an account in System Preferences isn't the same as just putting a home folder into /Users/. The account needs to be created first.
    Then I can transfer over the itunes folder etc.?
    Yes.
    (52008)

  • Hello, I need help with my macbook pro. It looks like I cannot install anything anymore. Everytime I try to install a new software, use the migration assistant or click the lock to make changes, it simply does not react.

    Hello, I need help with my macbook pro.
    It looks like I cannot install anything anymore. Everytime I try to install a new software, I simply get stuck during the installation type process. I put in my password, it does accept it, but it does not go any further.
    I tried to reset the password, put no password, repair the permissions, the disk but nothing will do. I nearly got stuck with the log in screen but finally succeeded in disabling it.
    So I thought I might try to create a new account but I cannot click the lock to make changes. It simply refuses to react.
    I am now thinking about using the migration assistant to save all my settings, data and so fourth, but again I get stuck when I have to type in my password. It accepts it but nothing happens...
    I guess it has something to do with the authorization process, but can't find anything on the internet about it... Can you help me out?
    I am running Lion 10.7.3.
    Regards,
    Nicolas.
    (I apologize if any grammatical/structural mistakes were to be found, english is not my mother-tongue. )

    You probably won't like this suggestion, but I suggest you reinstall Lion.
    First, backup your system. Next, reboot your system, press/hold the COMMAND-R keys to boot into the Recovery HD. Select 'Reinstall Mac OS X'. If you purchased Lion as an upgrade to Snow Leopard, the reinstall process will install Lion 10.7.3. If your system came preinstalled with Lion, you might still get Lion 10.7.2. Both installs are a total install of the OS. None of your apps or data will be impacted. Just the OS.

  • Migration Assistant - All of the files were not transferred

    I transferred all the user files, settings and applications using migration assistant. I went from an intel iMac to a newer intel iMac. Snow Leopard to Lion. I checked everything in the migration assistant except for the iPhoto library of one of the users because it was too big for the main hard drive of the new computer. I copied it manually to the secondary hard drive.
    At the end of the migration a window said that not all of the files were transferred and I should check to make sure I have everything I need. (I'm not sure the exact wording). Below that it said that a static IP was transferred and I should not have both the old computer and the new one on the network with the same IP.
    Do you think it's just referring to the iPhoto library when it says all files were not transferred? Or could there be something else. Is there a log that I can look at that will tell me what might not have transferred?
    As far at the IP thing, I changed the static IP on the new computer so that's fine.

    Hard to say. I suggest that you peruse Pondini's Setup New Mac guide and determine if you did things the right way.

  • After Restoring with Migration Assistant internet accounts are not working properly

    Hello!
    My Macbook Pro's HDD fried a week ago, so I swapped it for a new one. I had a backup from about 30mins before the issue happened, so I thought everything would go fine with Time Machine. Well, not quite. After installing Mac OS X Mavericks from the Disk Utility and telling the system to apply the latest backup on Migration Assistant during the installation, everything started up the way I left it, but several problems showed up and I have been trying to troubleshoot them.
    Issues:
    1. I used to have Facebook, Twitter and two Gmail accounts logged via the Internet Accounts preferences. Used the gmail accounts for notes, contacts and calendars. Now, they all show up on the menu, but when I click on any of them it tells me they aren't connected and asks me for their password. When I put it down, it gives me an "Unable to verify account" message. If I delete the accounts and try to reinsert them, I get the same message. What's even more weird: When I restart, they are all there again.
    2. Notes doesn't update properly. It shows me all the notes up until like 4 weeks ago, and whenever I even click on the app's window, it tells me it can't connect to Gmail and asks me for its password again. Several other apps that require syncing, like Calendar, have the same issue.
    Troubleshooting attempts:
    1. It's not a problem with these accounts, as I've been able to  sync them no problem if I create a new user. But I had some serious work being done and I don't really want to get a fresh start.
    2. I tried doing a clean install and when the Migration Assistant showed up I asked to transfer everything except personal documents and data. It worked, but I lost all my personal files that are not on dropbox (not many, but there were a few important things). Also the wifi didn't connect at all, kept saying it was self assigning an IP or whatever. This did not happen before.
    3. Not using migration assistant at all, but restarting the system and restoring a time machine backup, even an earlier one from that same day. Mac gets stuck on spinning wheel during boot :/
    This killed my weekend's productivity already, as each clean install and time machine restoring takes 3hrs+. I don't know what to do at this point.
    Macbook Pro, Early 2011, 13". Old HDD 320gb, new one 500gb. OS X Mavericks 10.9.4 (the backup is from 10.9.3)

    ragob66,
    Welcome to the Apple discussions!
    Try this:
    *Accessing Time Machine Backups From Another User Account or Computer*
    Yes, you can do this using the Time Machine interface.
    Attach the drive containing the TM backups to your computer.
    Control-click the TM icon in the dock and select "Browse Other Time Machine Disks...".
    Highlight the desired disk and click “Use Selected Disk”. This will now allow you to browse those TM backups via the ‘time travel’ window. From here you can restore what files you need access to. Bear in mind that any files moved will have the permissions of that previous user account. Thus you may be prompted for the user name and password of that previous account. However, once verified you should be able to adjust “Sharing & Permissions” in the files “Get Info” window.
    Let us know if this resolved your issue.
    Glenn

  • I just bought a new iMac and used the Migration Assistant to transfer my files. Initially, all was working, but now a week later, I get the message that the application manager is missing, and I cannot get Photoshop and InDesign to launch. I do not want t

    I just bought a new iMac and used the Migration Assistant to transfer my files. Initially, all was working, but now a week later, I get the message that the application manager is missing, and I cannot get Photoshop and InDesign to launch. For my personal use, I did not a need to join Creative Cloud. Have you any suggestions for a work-around?

    Try to install Adobe application Manager from below link and check
    Adobe - Adobe Application Manager : For Macintosh : Adobe Application Manager : Thank You

Maybe you are looking for

  • Popup window or rollover in Acrobat?

    Is there a way to include popup windows or rollovers in a PDF document? I'd like to add one or the other in a book where the window or rollover would provide a definition of a term for the reader. Thanks, Karen

  • Crystal Reports for Visual Studio 2008

    We are currently using Visual Studio 2005 w/Crystal Report 11.5.  We have been unable to migrate to Visual Studio 2008 up until now because the only version of Crystal Reports that was supported for Visual Studio 2008 was version 10 I believe, and th

  • Mismatch in system number on Solution manager and SMP

    Hi All, I found System Id is different in Solution manager and Service Market Place. But where as System number is same in Satellite system and Solution manager. Because system is not same we are unable to send he solution to SAP. Please suggest how

  • Scroll bar on the right is off the screen. How is this fixed?

    In the 11.0.1 version of iTunes, when I go to full screen, the window is too big and the scroll bar on the right is off the screen. Can this be fixed, or do I have to wait for the next version?

  • What happens when I deauthorize all 5 computers

    I need to deauthorize all 5 computers because I cannot access one of my computers.  What will happen when I deauthorize all 5?  Will I lose anything?