Migration assistant locked up at 5-8 minutes

Im trying to run migration assistant, and it went for three hours then got stuck at the applications folder. it has said between 8 and 5 minutes for over an hour. is there a safe way to shut it down?

CEOofTNFYA wrote:
This is absurd. I would like to take a minute to thank Apple for making sure that:
Nothing on their own website indicates that a transfer from a 10.5.8 to Lion is currently impossible.
Are you sure you've read everything on this page?
If I can read it right, it says on step 2:
"Step 2:
Make sure you have the latest version of Snow Leopard."
I'm not the sharpest knife in the drawer, but for me, that means "yon can't install Lion from any other system version than 10.6.8"
I don't think it's fair either. Leopard owners will have to buy 2 systems, but advertised, it definetely was.
Yours.
JP

Similar Messages

Trying to use migration assistant , it has been at one minute to go for the las 5 hours what do I do

I am using migration assistant and it is at one minute remaining for the last 5 hours, what do I do?

Hello troubledupdate,
Thank you for using Apple Support Communities.
For more information, take a look at:
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Have a nice day,
Mario

HELP! LOCKED IN LIMBO W/MIGRATION ASSISTANT DATA TRANSFER: "LESS THAN 1 MINUTE LEFT" FOR 10 HOURS

This has happened before. I'm migrating from one Macbook Pro to another Mac (though it doesn't seem to matter if it's a MBP or other Apple powerbook) and it gets almost to the end of the bar with the blue water line a sliver away from finishing but it stays at "less than one minute remaining" as it finishes up migrating settings. Going on 10 hours now.
Have read other discussions from 2009 to earlier this month w/this issue.Some say it's a Lion OS issue that's been acknowledged as a flaw. Others had the same issue w/Leopard & say to ignore the remaining minute & leave it alone until it finishes which could take a day or more. I'm moving almost 300 GB of data. I've done this before and had same issue and interrupted it. I manually migrated over applications, documents, etc, one by one and it still took overnight just to do some of the data, so this is not an inordinate amount of time.
If it's going to complete, I'll let it run. If it's not, I'd like to know so I don't waste more time trying... Thanks in advance for assistance w/this conundrum.

I'm not a big fan of migration assistant, because this happens all the time. I'd give it a few more hours, then say "I give up."
Why didn't you use the Setup Assistant on the target mac using the firewire disk mode? I don't have absolute evidence, but you rarely see issues with people who use the Setup Assistant with a newly installed OSX (or brand new Mac).

Migrating assistant freezes at less than one minute remaining os x lion

Hi I recently got a macbook pro 13" os x lion, i5 2.4Hz. And i'm using migrating assistant to move my files over from a pc (45gb). The process was fine until it reaches nearly the end where it says cleaning up "less than a minute remaining" and it has been stuck there for ages. My laptop which is the source computer for some reason turned off by itself when it gets to the end of the process. I didnt know how it happened because i was unattened. However the mac was still running. Is it normal? Should i wait or start over again?

http://www.apple.com/support/mac/app-store/contact.html?form=account

Migration Assistant stuck at "less then a minute". HELP!

I just got a macbook pro but there seems to be some problems with the migration assistant.
I used ethernet cables to connect my macbook pro to my macbook, and it transfered fine for about 3 hours. Right when I thought I was going to be able to use my macbook pro, it got stuck. It says "transferring files to support application" and below that "less then a minute remaining". What can I do?
PS. I'm running the newest version of leopard on my old macbook.
Thanks in advance.

akkaneko wrote:
I just got a macbook pro but there seems to be some problems with the migration assistant.
I used ethernet cables to connect my macbook pro to my macbook, and it transfered fine for about 3 hours. Right when I thought I was going to be able to use my macbook pro, it got stuck. It says "transferring files to support application" and below that "less then a minute remaining". What can I do?
PS. I'm running the newest version of leopard on my old macbook.
Thanks in advance.
Ignore the estimate and leave it alone, it can take longer than you imagine but it does complete, eventually.
Ethernet is not particularly fast at this task in my experience.

Migration assistant freezes at "Less than a minute remaining"

I am installing Leopard to a new HD on a PPC G5; during install I have chosen to migrate from my PPC G4 running Leopard via FireWire. It goes along for hours and makes steady progress, until it gets to the very end, it stalls at migrating Application Support with the time remaining saying "Less than a minute", which it has been saying for over 7 hours.
This is the second time I have tried this, the first time I had to do a hard reboot because there is no option to quit during migration. When it restarted it went right back to the "Welcome..." intro. I figured I must have done something (don't know what) wrong, so I did a hard reboot from the installation disk, reformatted the drive and tried it again. Same thing... any idea why this may be happening?

since this is clearly not working I suggest you try migrating user settings only (no applications). If that doesn't work either you'll have to migrate by hand.
see this post for help with this:
http://discussions.apple.com/message.jspa?messageID=6185507

Migration Assistant Stuck at "Less than a minute remaining"

Migrating from old G5 single CPU to dual 2.3 G5. Tiger to Tiger. The dual has a clean install from the setup disk, but no software updates -- I just followed the onscreen instructions regarding when and how to do the migration via Firewire target disk mode.
The migration ran for 2 hours, the minutes counting down just fine, but it stopped with "Less than a minute remaining." There it sits, fans blowing, workday slipping away. Any ideas? Is the migration probably finished? Some lonnnng verification occuring?
Thanks,
Paul Otteson

Wait another hour. If it doesn't work, you may have insufficient space to finish the migration, or a bad firewire cable for or interface on the drive in question.
Consider the steps suggested for PowerPC to Intel migration. They are more likely to work:
http://discussions.apple.com/thread.jspa?threadID=435350&tstart=0

Migration assistant has halted at "less than a minute remaining"

Im in the process of transferring my MacBook Pro to a new MacBook Pro.
Since I didn't have a Thunderbolt cable and the ethernet cable is not an option on the new MacBook Pro I have done it wirelessly.
At the start is had 29 hrs to complete…I have been extremely patient until now…this is 2 days into the transfer.
It says it has "less than a minute remaining"…would be great if that were true.
Its been stuck on that now for 3 hrs.
I did note the time remaining kept going up and down during the transfer so I'm hoping this is the case and it will eventually finish.
Any suggestions on what to do if it doesn't change anytime soon?

I had this problem migrating from my iMac; a late 2009 24in FW800 with Mavericks, to a late 2013 27inch Thunderbolt. Migration Assistant hung at "lass than a minute" for over an hour and change... My back up drives had two F800 interfaces and a USB. I was abe to plug an additional drive into one of the remaining available ports on the back of my Time Capsule drive. This woke up the Time Capsule drive and finished the migration installation process.
I beleive the setting "put Hard Drives to sleep when possible" must have been on by default on the unused OS without my awareness. The action of plugging in an additional drive to the remaining port on my Time Capusle back up drive woke the Time Capsule drive up and then in completed almost imediately. Hope this helps and that any future readers have a BAck Up drive with more than one port and an extra device or drive they can plug into in (Daisy Chain Style) to get the Capusle drive to complete. Good luck!
Turned Out Flawless for Me.

Migration assistant taking forever at "less than a minute"

Using Migration Assistant to set up new Macbook Pro running 10.8 from external drive (via USB) using 10.8 Time Maching back up from my iMac. I did the exact same thing in January from old Macbook Pro to new iMac without any trouble. This time around the migration assistant has been in "Less than a minutate remaining" mode for about 3 hours. It has gone from "tranferring files and folders" to "transferring system settings" but both has remained in "Less than a minute remaining." Should I be persistant and stick it out? If so, for how long? Some support threads say stick it out while Apple support says "this is not normal" and the back up could be corrupt and may need to be migrated in safe mode. Any thoughts or ideas shared here appreciated. Thanks!

I had this problem migrating from my iMac; a late 2009 24in FW800 with Mavericks, to a late 2013 27inch Thunderbolt. Migration Assistant hung at "lass than a minute" for over an hour and change... My back up drives had two F800 interfaces and a USB. I was abe to plug an additional drive into one of the remaining available ports on the back of my Time Capsule drive. This woke up the Time Capsule drive and finished the migration installation process.
I beleive the setting "put Hard Drives to sleep when possible" must have been on by default on the unused OS without my awareness. The action of plugging in an additional drive to the remaining port on my Time Capusle back up drive woke the Time Capsule drive up and then in completed almost imediately. Hope this helps and that any future readers have a BAck Up drive with more than one port and an extra device or drive they can plug into in (Daisy Chain Style) to get the Capusle drive to complete. Good luck!
Turned Out Flawless for Me.

Migrate Assistant Stuck

Hi again,
OK, I just ran a clean install and I'm now using Migration Assistant to restore all my files. It's been stuck for almost an hour on Estimated time: 46 minutes on "Transferring files to support applications". I don't know if the progress bar is moving (I just started taking pics), but is this a big deal? Can I just stop the migration assistant and run it again? What comes after "Transferring files to support applications"?
Thanks,
Don
Message was edited by: Don Palm

All I can do is tell you what I did - YMMV.
Migration Assistant quit on me with a minute to go. I figured it had done most of it's work, so I did a power off and restarted. 10.5 started and this time I told it to not bother importing any data. It then prompted me to set up and account, which I did. Once the login process finished, I logged out and was pleased to discover that all my accounts were there, so I logged in to my main old account, ran it for a while and found that everything seemed to have been moved. I then deleted the account I had to create to finish the install (above).
However, if you had an hour to go, it is highly likely that your data was not moved. In that case you will have to wait for Apple to release an update to Migration Assistant so you can move your accounts from your old area.
Note: I have two OS partitions: One with Tiger (10.4.10) and a clean one for 10.5. I moved accounts from the Tiger partition to the Leopard partition using the Assistant.

Migration Assistant keeps locking up

I have tried three times to migrate my PB17 to my brand new iMac 20" with iSight. All three times, the migration chokes when the iMac says I have 1 hour 35 minutes to go on the migration. At that same time, the PB17 (in target disk mode) appears to lock up (the firewire logo quits moving around on the screen).
I "chatted" with Apple tech support last night and couldn't figure it out so I'm coming to you folks for help.
Oh, another thing, since I have an accout as myself (Tark Bunch) on BOTH the iMac and the PB17, the migration assistant doesn't like this, so I have to re-identify the PB17 user as someone else before continuing with the migration (in this case I become TarQ Bunch). This seems to enable the migration to start, but never allows for a successful migration.
Apple tech support asked if I had updated the firmware on the PB17 (I haven't, but assume it is up-to-date with the software updater). They also asked if I had the fileVault on (no I don't) and they thought I should run disk utility on the PB17 (which I haven't had time to do yet).
looking forward to suggestions (better yet, solutions
-Tark

Royal Pain is right, but sadly, this was what I had to do to migrate.
I took your advice, hooked the two computers together via Firewire, with my old computer in target mode.
I then dragged directories over. By this approach, I ended up with the old computer locking up during the transfer. I finally traced it to a corrupt jpg.
Since I had already moved a lot of files accross to the iMac, I then purged those files off of the old PB17.
I emptied the trash, rebooted and attempted migration again. I deliberately did not migrage Applications and the Migration went off without a hitch.
All my stuff was on the new system (except the files I had purged) and my iTunes database remembers what I played last and how many times
It would be sweet if Migration assistant could run a diagnostic to find these files and save ourselves a lot of work, but maybe we are the rare exception (My wife's and kid's migrations went well with no hitches...)

Hello, I need help with my macbook pro. It looks like I cannot install anything anymore. Everytime I try to install a new software, use the migration assistant or click the lock to make changes, it simply does not react.

Hello, I need help with my macbook pro.
It looks like I cannot install anything anymore. Everytime I try to install a new software, I simply get stuck during the installation type process. I put in my password, it does accept it, but it does not go any further.
I tried to reset the password, put no password, repair the permissions, the disk but nothing will do. I nearly got stuck with the log in screen but finally succeeded in disabling it.
So I thought I might try to create a new account but I cannot click the lock to make changes. It simply refuses to react.
I am now thinking about using the migration assistant to save all my settings, data and so fourth, but again I get stuck when I have to type in my password. It accepts it but nothing happens...
I guess it has something to do with the authorization process, but can't find anything on the internet about it... Can you help me out?
I am running Lion 10.7.3.
Regards,
Nicolas.
(I apologize if any grammatical/structural mistakes were to be found, english is not my mother-tongue. )

You probably won't like this suggestion, but I suggest you reinstall Lion.
First, backup your system. Next, reboot your system, press/hold the COMMAND-R keys to boot into the Recovery HD. Select 'Reinstall Mac OS X'. If you purchased Lion as an upgrade to Snow Leopard, the reinstall process will install Lion 10.7.3. If your system came preinstalled with Lion, you might still get Lion 10.7.2. Both installs are a total install of the OS. None of your apps or data will be impacted. Just the OS.

Migration assistant hangs in the last minute

Got a new MacBook Pro and using migration assistant to transfer from MacBook Air over thunderbolt. It will not complete.
Updated OS on both. Gets to less than a minute and never finishes.

Press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly to restart. Test. If the migration wasn't successful, see below.
1. Migration may stall with "Sharing Only" user accounts
2. Back up the old system with Time Machine or Disk Utility and try migrating from the backup.

Migration Assistant 'Less than 1 minute remaining' Solution

Hi all..
I have been reading the problems people have been having regarding Migration Assistant and the dreaded 'Less Than 1 Minute Remaining' screen than never goes away and I found a solution for it so you don't have to go through all that!
I recently upgraded my 24" Late 2008 iMac to a new 27" iMac and wanted to bring all my files over to the new machine as most of it is photos and Final Cut Pro plus related editing software!
I did the whole connecting both macs up on the same network and even connected the ethernet cable for faster transfer but after hours of showing promise, it hung up on 1 minute to go. After leaving it for 4 hours, I gave up but here is the best way to do a hassle free transfer.
Back up all the files on your old machine to a hard drive in Time Machine form. I had 320 gigs to do so it may take 4 hours or so to do the back up.
when this is done, disconnect the drive from the old machine. On the new machine, connect the hard drive, open Migration assistant in Utilities and select BACK UP FROM TIME MACHINE!
Mine took about 1 hr 40 mins to complete and it works like a dream.
Sincerely hope this helps people

Press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly to restart. Test. If the migration wasn't successful, see below.
1. Migration may stall with "Sharing Only" user accounts
2. Back up the old system with Time Machine or Disk Utility and try migrating from the backup.

HT4413 I am trying to use migration assistant to move everything from snow leopard (10.6.8) to mountain lion (10.8.3) using a direct machine to machine ethernet cable connection but it stalls out at about 17 minutes remaining. Thoughts on how to proceed?

I am trying to use migration assistant to move everything from snow leopard (10.6.8) to mountain lion (10.8.3) using a direct machine to machine ethernet cable connection but it stalls out at about 17 minutes remaining. Thoughts on how to proceed?

Have you set both to never sleep?
Is the source (old) Mac's software up to date (including the Migration Assistant for Mac OS X Snow Leopard update)?
Is the old Mac healthy? Have you run Verify Disk on it lately?
The estimates are wildly inaccurate under the best of circumstances. How long has it been stuck?

Migration assistant locked up at 5-8 minutes

Similar Messages

Maybe you are looking for