Migration assistant restart

Fired up new iMac today and migration from Windows XP PC to iMac stopped after 3 hours. That was using wireless on the iMac. So now trying to restart with wired connection but iMac says 'looking for other sources' and PC 'waiting for you Mac to connect', for 10 minutes. Is there something I need to do to allow this process to restart?

As a general rule of thumb NEVER use wi-fi to migrate using Migration Assistant or Setup Assistant. In your case I'd recommend calling AppleCare for advice, you have 90 days of free telephone support when you buy any new Mac. If the first technician is not able to help, call back or ask that your case be escolated.

Similar Messages

Just used migration assistant from one mac to another one. When I restart the new mac, the old user boots up instead of my new user. Have to log out then log in.

Just got a new Imac. I migrated from the old Imac. When I boot the new Imac, the old user screen boots up. I have to log out and then log into my new user on the new mac. Whats up?
Thanks.

Thanks for your help. But the PowerBook has a Migration Assistant designed for the purpose of transfering files from the old Mac to the new Mac. The steps take me to the point where I'm instructed to restart the old Mac while holding down the "T" key. But nothing happens when I do that. It just restarts and the Migration Assistant on the new Mac still reads "waiting for old Mac to restart".
There has to be a way to do this. I can't install the original applications on the PowerBook from scratch because they were meant to run on Classic. The PowerBook doesn't recognize any of the old Classic installation disks I have from previous Macs (Oddly, the PowerBook has capability to run Classic, but not the actual software-- and no Classic installation disk was provided, unlike the software provided for iBooks. And I can't install any of the System X upgrades because they need to recognize the original application already on the computer in order to upgrade.
I just calculated that if I have to rebuy all the applications I need, I couldn't afford to do it (unless someone can-- or even wants to-- take the old versions off my hands to offset the cost of buying new ones).
There must thousands of graphic designers like me who run a small business and can't afford to re-stock their entire software collection every time they upgrade to a new computer. Why would Apple diss the very people who have been supporting the company (actually keeping it alive) all these years? I don't think they would do that. I'll just have to keep looking for a solution.

HT4796 I started Migration Assistant and then my old computer spontaneously restarted. I am back in Migration Assistant but my [new] iMac is still waiting for input from my old computer, and my old computer is waiting for the iMac to connect. What do I

I have a new iMac. I'm using Migration Assistant to transfer files. My old computer spontaneously shut down. I restarted it and am trying to use Migration Asst again, but each computer is waiting on input from the other one. What do I do?

Let me see if I've gotten this right! You want to remove an account from BOTH machines? Do this for your new machine first, then for the other.
Click the Apple logo on the top left of the screen, System Preferences, Users and Groups (under Systems), unlock the lock in the window if its locked (you need to know the password), select the user that you wish to remove, and click the - sign next to the + sign for Login options. A window will pop up with some options. Select Delete this user and securely, and click 'Delete user'.
After this, do an update from the App Store.
Thats all there is to it.
For the other machine repeat the process except for one thing. Before you delete the user in this case YOU, you will have to give Administrator priviledges to your son bu checking the box 'Allow user to administer this computer'.
Do NOT do anything from Finder ... if you dont know how to fix the consequences of the problems caused.
There is no need to unauthorize your iTunes account on your new machine. Do it on the old machine though.

How to restart migration assistant

Friends,
I just received an imac i7. I want to transfer files and programs from my imac 24 2.8 intel machine by migration assistant. I tried last night, but the system appeared to freeze about 3/4 of the way through. Is there a way to restart migration assistant to complete the job or do I have to do it all over again?
Would transferring from a TM backup be better? My TM is USB 2.0, and I figured that would be too slow.
Thanks!
Steve

Barry,
I think I figured out the problem. When I tried to migrate overnight, I didn't change my new machine's power saver feature, so I think the HD went to sleep after an hour (although you would think the migration activity would keep it awake). In any event, I'm transferring from a TM disk today; if I don't like the result, I'll try migrating via firewire with the settings changed.
Thanks for your help.
Steve

Migration Assistant refuses goes to restart during migration

Hello! I've been meaning to restore the documents in the Time Capsule backup to my new MacBook Air that I''m using right now but nothing has worked. I have a 2-Tb Time Capsule with a backup files of about 300+ Gb inside the backsup disk. My MBA has 128 Gb capacity thus I need to restore some of the documents in the backup disk (e.g. photos) which only take 50+Gb in capacity. I've selected photos to be migrated into the new MBA using Migration Assistant but it always goes back to restart every single time.
My questions:
1) How do I successfully perform the migration?
2) Will I be able to restore the whole iPhotos (50+Gb) into the new MBA so that the events in the iPhoto will be automatically restored to the way they were before I deauthorized my old MacBook?

Hello,
I have the same problem and I can't find a solution...
please some help...

New iMac is stuck on grey apple screen after restart from Migration Assistant

New iMac is stuck on grey apple screen after startup. It is a 3.4GHz Quad-core Intel Core i5 running OS 10.9.4. The problem occurred after a migration from my older 2009 iMac which is running Snow Leopard 10.6.6. When the restart occurred from Migration Assistant, the new computer will not boot up to the login screen. Disk utility did not solve problem. Followed instructions for a soft reinstall of Mavericks but that also did not solve problem. Any suggestions?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

TS1963 Stop and restart migration assistant?

I inadvertently started migration assistant using wireless. I see its going to take 40 hours to complete. Should I (can I) stop and plug in the FireWire cable and start over? How do I do this?

See:
I started migration assistant using wifi - can i stop and switch to firewire

Migration assistant freezes - PLEASE HELP ASAP

I am trying to run the migration assistant on a new imac i7 that I received. The "old" machine is an i5 ,and it is transferring about 500gb of data. It ran for many hours, and has been stuck on "19 minutes" remaining for about an hour now. What should I do?
Am I going to have to redo the entire transfer? (I hope not - it took HOURS, AND HOURS!)
I'm sure it isn't "good" to simply power off, or unplug one of the machines while the migration assistant is running. What should I do? Need to some asap, as I need to get the machine up and running.
Thanks for your help!
-Rick
twitter.com/Rick_Smith

Thanks for the feedback. I actually just followed the directions on the new i7.
I took it out of the box, powered on, went through a few menus, and then selected the option to transfer settings from another mac. It never asked for updates, or anything.
It simply asked me to hook up a firewire cable (fw 800), and then restart the "old" computer and hold down "t" as it restarted. It did that, the new machine "found" the "old" one, and it started transferring.
I had about 500 gb of data on the old machine. So it's taken a long time, but then it got to 19 min remaining, and has been stuck there every since. I really hate doing a hard restart, but it looks like I have no choice...
I guess I"ll go try that..
**fingers crossed*

Migration assistant screw up, Mac Pro not seeing wifi/TC

Hi
I've been using a MacBookPro (MBP) for almost 5 years now, with a 1TB Time Capsule (TC1) using Time Machine (TM). I am the sole user, HDD is 270Gb used/50Gb free; using Mavericks, v10.9.2. On Friday, I used Sophos anti virus home edition, to scan the MBP. It comes up with no threats identified, and I uninstall Sophos.
Yesterday I took delivery of the Mac Pro (MP) with the 3Tb Time Capsule (TC3).
I booted up the MP, with the TC3. I did not, at this stage, connect the TC3 to the internet. Using TM, I backed up the MP. TC3 flashes the amber light.
Using Migration Assistant (MA) I tried to copy the MBP to the MP, 3 times. This did not work. At the point where the target machine has listed what is available to transfer, I click Continue and MA on the MP closes, on the MBP it says something like connection lost. The screen where this happens, lists 3 items available to transfer Application, Documents/Date and Computer settings; with a content of 128kb indicated, which is clearly wrong! The connection was an Ethernet cable direct from the MBP to the MP.
At this stage, I decide to connect the MP to the internet using TC3, there's some settings to be changed on TC3 using Airport Utility and it connects ok. TC3 has a steady green light.
I run 2 software updates on the MP. I surf the net briefly, to make sure it's ok.
I try again to use MA. This time, the dialgoue box listing what's available to transfer is different. There are 2 or 3 more options, colour is present, the font is different, the box is about the same size. The MP would not let me take any screenshots as all other applications are closed when MA is running. I don't think it gave me the size of what was being transferred, but it looked more hopeful, so I Continue and the transfer starts, with an estimated time of 33 minutes.
The transfer completes.
The MBP, as you would expect, has not changed, the MP has, but not in the way I expected. Applications appear to have all transferred (without checking them), no Documents/data and no Downloads appear to have transferred; I ticked to transfer everything.;I know I can reconnect the Ethernet cable and simply copy the data across.
But the main problem appears to be, the MP does not see the wifi.
Ethernet cable is removed.
The MP asks if I want to give permission to eeEvents manager (I presume calendar related) and say yes. It also asks if I want to install a Java run time, no.
In System preferences/Network it tells me a new Thunderbolt bridge has been found and asks if it's ok, to accept it, yes. It tells me the Ethernet cable is disconnected, rightly so; it says Airport is not connected.
I open Airport utility, no sign of the TC1 or TC3 despite it searching. Apart from TC1, the MP, MBP and TC3 are sat within a couple of feet of each other.
I turn on TC1/TC3 (separately and not at the same time, then at the same time), but the MP does not see them. I've reset TC3, rebooted the MP and still the MP does not see it.
I don't get any errors or warnings coming up.
I think my next option is to try and reset the MP to the factory settings, but this won't work, as I've no internet connection to reinstall OS X. No disc is sent with the MP.
Any suggestions as to what to try? Otherwise, I'll be off to the Apple Store tomorrow for a One to One!! :-(
Thanks for any help and Happy Mother's Day!!

Take the MP and connect it via ETH to your main router.
Restart the machine holding down command option R, you should see a spinning globe
Open disk utility and reformat the MP HD as Mac journaled
Then install OSX on this drive

Safari and iTunes will not open on my Macbook Air after Migration Assistant

I did the Migration Assistant via wireless (from Macbook Pro TO Macbook Air) last night and it did work. However, my Safari and iTunes will not open on my Macbook Air now. The error messages are as follows:
Safari: "Safari quit unexpectedly. Click Reopen to open the application again. Click Report to see more detailed information and send a report to Apple."
- I tried reopening the app, restarting, and shutting down the computer. Nothing has worked.
iTunes: "The file 'iTunes Library.itl' cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?"
- I clicked "Download iTunes" but then another message comes up that all my software is up to date.
Any help is very appreciated.

Try repairing permissions using Disk Utility.

HT4889 Am I wrong or does Migration Assistant not work in Mountain Lion (10.8.2) when migrating from a PowerPC running Tiger (10.4.11)? Apple really needs to get on the ball or face losing people buying their new desktop products.

The title alone speaks to my frustration about this issue.
Used the process that was recommended by Apple to migrate from my "Lampshade" iMac (PPC running 10.4.11) to the new iMac (Intel running 10.8.2) and I got bupkiss...
Just a spinning wheel (not beachball) and no drive recognized using Migration Assistant for both nor when using Target Mode on the iMac running 10.4.11 and Migration Assistant on the iMac running 10.8.2. Which is ironic, or more accurately oxymoronic, since the iMac in Target Mode (10.4.11) is recognized on the desktop of the iMac running 10.8.2 but not in the Migration Assistant. And before you can misdiagnose..it is not the Thunderbolt connection since I have the Apple recommended Thunderbolt to Firewire adapter and also used the Firewire 400 to 800 cable to expedite the transfer.
On a personal note...
I'm not bashing Apple for this...they are "head and shoulders" above the competition in what they do but I've been burned a few times so I feel I can share a small bit of loyal customer advice...I understand your iOS and mobile products hold huge sway in company focus and market-share but I find it a tad unwise to slack on the desktop applications. I don't recall any app for the iPhone/iPad family being made on the iPhone/iPad...only from desktop applications if I recall correctly. And how can I clearly "Move my Mac even further ahead" as your marketing states when I can't even migrate my files from my old Mac to my new one in a simple fashion as per your instructions?
I thank anyone in advance with an answer or even a workaround for this issue and please have a great day.

http://support.apple.com/kb/ht4889
Migration from Mac OS X v10.4 Tiger to OS X Lion
Migration from Mac OS X v10.4 computers to OS X Lion over your Wi-Fi or a wired network is not supported. However, if both Macs are equipped with a FireWire port, you can use Target Disk Mode to transfer your data:
Verify that both Macs are equipped with a FireWire port. Note that different model Macs may have different FireWire connectors, which will require an appropriate cable, such as FireWire 400 to FireWire 800.
On the Mac you want to transfer data from, Restart, and immediately hold the T key.
Wait for the FireWire logo to appear on the screen. If it does not, restart and try again.
Connect both Macs via the FireWire cable.
On the Mac you want to transfer data to, Open the Migration Assistant application.
Select the option "From another Mac, PC, Time Machine backup, or other disk" and click Continue.
Select the option "From a Time Machine backup or other disk" and click Continue.
Select your other Mac's volume, such as "Macintosh HD", from the list, and click Cont
EDIT: Actually I realize you did follow these directions and if your drive is seen on the new Mac it should work. You're entitled to free Apple support with the new purchase, I'd give them a call.

I used Migration Assistant to copy data to an new MacBook Pro from an old via my Time Capsule. When asked if to inherit time machine history on the new Mac, I mistakenly said no. How do I go back one step to say yes?

There isn't enough space on the Time Capsule to create a separate backup of the data on the new MacBook. And I am reluctant to delete old backups of the old MacBook to create space to backup the new machine. This occurred about 3 weeks ago so the data on the two machines are now out of sync. If I start over by formatting the new MacBook and rerunning Migration Assistant to pull data from the Time Capsule, how do i preserve the last 3 weeks of data on the new MacBook, considering that I didn't keep track of which files changed in the last 3 weeks?

All the rest of the stuff is where it should be. As best I can tell. I have been going through my programs one at a time to see what works. With the change in the OS (Launchpad? What the heck?) I am finding a significant number of my old programs are not working. Some I have found upgrades. But without a working mail program, the machine is pretty useless for work.
The Apple techies had me run through 3 hours of 'stuff' (holding down keys and restarting, etc, etc). It still does not launch. I think we are waiting for a 'miracle', but I need to know now if they should just come get this piece of junk or if they really are able to find a solution in a timely manner.

Migration Assistant doesn't allow me to choose what drive.

Well, I got my new computer. I tried to migrate a drive from my old computer using Migration Assistant. and it doesn't allow me to choose what drive.
In my old computer I have 5 drives. The original HD (was 10GB, was replaced last year by a 40 GB) and on my Hitachi 250 GB drive that I added 2 years ago, there's a partition with 4 drives.
I wanted to migrate one particular drive from there (called Current work).
First I did a mistake. I connected both computer via the firewire in the afternoon when there was enough daylight so I don't have to do it later at night (the computers are under the table.) I thought it's OK since I'm not pushing any button yet ("migrate now", "transfer", and such).
I turned on the new computer and a message appeared: you must restart.
That's strange, I said to myself. it's a brand new computer. Usually It says that when there's a problem, but OK I restart and when it's back on, I see that my external drive (Neptune from OWC which was still hooked up in the old computer) is on the desktop. And it took just a few seconds. I open it and all the files, etc. are there. It did copy the whole external drive !
I'm not an computer expert but I believe the Mac Pro did notice that's there's a firewire hooked up and then, without asking me, migrated the external drive and that's why it asked me to restart. I would have prefer if it tells me "restart so migration can begin".
I don't mind for now that my external drive is on my new computer. I can always erase it if I don't want it. It is still external right ? so it doesn't intrude on the 640 GB of my HD so I just keep it.
But it also copied/migrate Mac HD 40 GB which is full of OS 9 and I almost never use it anymore. I don't want it coz it has applications and they advise not to migrate applications (certainly not applications with issues).
They say migrate folders, settings but re-install applications.
And it migrated also another drive called "Scratch" which has only personal date no system, no software.
Anyway, I erased everything and re-installed using the Install disk that came with the computer.
BTW, what they say in the manual (p. 90: Re-installing the software that came with your Mac Pro) is different than what really happens.
They say insert disk, double- click on Install and then click options in the "Select a destination" pane of the installer. Then click "erase and install" Problem is: there's no "Select a destination" pane. Or any options.
I had to go to Disk utility and erase, then re-install OS X.
Then re-install the applications using "Install applications" (the other disc that came with the computer. )
OK, I did that. Then while everything is empty, new, I used Migration Assistant.
Now here is the reason why I post this.
They say hold T key until you see a firewire icon then select a drive. I can't see when there's an icon coz I have only one monitor, so I just hold and hold the T-key and turn on the old computer. The screen shows "waiting for you other computer to restart" 2 min.... 5 min... 7 min. Nothing happens. I stop holding.
I look at the desktop and I see that the icon of the old 40 GIG Mac HD is there. (and I believe with a firewire logo, but not sure about that.)
I have the impression that if I kept the T-key longer it would have migrate the other drives as well.
They say keep the T-key down until you see the firewire (then let go I suppose. As I said I don't see what's going on on the desktop of my old computer so I kept the T-key for a few minutes. I also tried another time to let go after 1-2 min. No difference.
I shut down the new comp. and the old computer screen appears automatically (both are connected to the monitor; the old with analog port, the new with digital port) and sure enough the firewire icon is moving on the screen.
I go back to the new computer and put the old 40 GIG Mac HD in the trash. Actually, when it touched the trash, I just saw an eject icon and the drive disappear. Did not go in the trash which is empty. So I guess I ejected, not sure what's the difference but I looked for it to see if it's anywhere in the computer. Could not find it. Not in the HD, not in the desktop. Good, I don't want it there. Is it hidden somewhere ?
So I tried again but wondering perhaps the old computer should RESTART not turn on (it was off) so now I wait until it's on, then push restart. I hear the gong when it shuts off but that's it, no other gong when it comes back. I keep the T-key. But nothing happened. Just see the message "waiting for your other computer to restart"
PS: BTW Target mode (which seems to me similar to Migrating with "Migration Assistant") will not work for me because it must be SATA, mine is ATA.
I didn't try but read that it has to be SATA.
Is it the same ? In migrating they say hold down the T-key (T for target)
And how come that my 40GB HD which is ATA did migrate (not that I wanted too but still).
Also, this drive ("Current Work") that I want to migrate to the new computer is in my external drive. Can't I just drag it ? If it has only personal data, files and folders I know I can, but It has system (OS X) and applications. It's the one I use and boot on, in my old G4 but I want to transfer Files and folders and settings, so the new computer will know what are my Safari preferences, Automatic fill-in, and perhaps it will move my iTunes music Library too ?
Basically everything except applications. Although I would like my Nikon scanner to be in the new computer as well as the LaCie DVD recorder but I guess I can do that later, separately ?
What are the settings or info I need ? Because if it's just Safari preferences, automatic fill-in and other such small thing, it might be better to just do it again in the new comp and forget about the hassle of migrating.

Try getting into Windows and then plugging in the Superdrive. The drive will only be attached to one OS or the other, not both.

After Restoring with Migration Assistant internet accounts are not working properly

Hello!
My Macbook Pro's HDD fried a week ago, so I swapped it for a new one. I had a backup from about 30mins before the issue happened, so I thought everything would go fine with Time Machine. Well, not quite. After installing Mac OS X Mavericks from the Disk Utility and telling the system to apply the latest backup on Migration Assistant during the installation, everything started up the way I left it, but several problems showed up and I have been trying to troubleshoot them.
Issues:
1. I used to have Facebook, Twitter and two Gmail accounts logged via the Internet Accounts preferences. Used the gmail accounts for notes, contacts and calendars. Now, they all show up on the menu, but when I click on any of them it tells me they aren't connected and asks me for their password. When I put it down, it gives me an "Unable to verify account" message. If I delete the accounts and try to reinsert them, I get the same message. What's even more weird: When I restart, they are all there again.
2. Notes doesn't update properly. It shows me all the notes up until like 4 weeks ago, and whenever I even click on the app's window, it tells me it can't connect to Gmail and asks me for its password again. Several other apps that require syncing, like Calendar, have the same issue.
Troubleshooting attempts:
1. It's not a problem with these accounts, as I've been able to sync them no problem if I create a new user. But I had some serious work being done and I don't really want to get a fresh start.
2. I tried doing a clean install and when the Migration Assistant showed up I asked to transfer everything except personal documents and data. It worked, but I lost all my personal files that are not on dropbox (not many, but there were a few important things). Also the wifi didn't connect at all, kept saying it was self assigning an IP or whatever. This did not happen before.
3. Not using migration assistant at all, but restarting the system and restoring a time machine backup, even an earlier one from that same day. Mac gets stuck on spinning wheel during boot :/
This killed my weekend's productivity already, as each clean install and time machine restoring takes 3hrs+. I don't know what to do at this point.
Macbook Pro, Early 2011, 13". Old HDD 320gb, new one 500gb. OS X Mavericks 10.9.4 (the backup is from 10.9.3)

ragob66,
Welcome to the Apple discussions!
Try this:
*Accessing Time Machine Backups From Another User Account or Computer*
Yes, you can do this using the Time Machine interface.
Attach the drive containing the TM backups to your computer.
Control-click the TM icon in the dock and select "Browse Other Time Machine Disks...".
Highlight the desired disk and click “Use Selected Disk”. This will now allow you to browse those TM backups via the ‘time travel’ window. From here you can restore what files you need access to. Bear in mind that any files moved will have the permissions of that previous user account. Thus you may be prompted for the user name and password of that previous account. However, once verified you should be able to adjust “Sharing & Permissions” in the files “Get Info” window.
Let us know if this resolved your issue.
Glenn

Migration Assistant is broken in 10.9.1

I've just tried setting up my new rMBP using Migration Assistant. Migration Assistant said the new Mac needs to be updated to 10.9.1, which I do. rMBP restarts. Run Migration Assistant on both Macs again. Migration Assistant crashes on both Macs. I then try using a Time Machine backup for the migration. This time, Migration Assistant doesn't see the Time Machine disk. I'm intrigued because Time Machine worked on 10.9, but with the 10.9.1 update appears that the update has broken Migration Assistant.
I rerun the process on my Mac mini and same thing happens.
This is rather frustrating, but seems to be part of a continuing trend of software companies releasing software and updates that are obviously unfinished.
Has anyone else had this issue?

Just back home from a follow-up visit to the Genius Bar on this migration issue (from MacBook Air to new MacBook Pro).
Previous efforts to migrate had taken endless hours and seemed to hang at the 20-mins-remaining mark.
At the store, even after we manually turned off WiFi before connecting the Thunderbolt cable, Migration Assistant seemed to turn WiFi back on and start the migration over WiFi.
In the end, we used the Air (source) in Target Disk mode, which forced the computers to use the Thunderbolt cable. Migration took a little over half an hour, as opposed to 12 hours or more that Migration Assistant was saying earlier when apparently trying to use WiFi.

Migration assistant restart

Similar Messages

Maybe you are looking for