MIgration Assistant - Wiping old mac data files
I recently purchased a new airbook (love it!!!) and am going to give my two your old macbook to my niece- is there a utility or steps that I can use to delete all my personal data from the old macbook?
Thank you for any help!
If you boot from your OSX installation disk you can use Disk Utility to format the drive with all zeros either once or many times depending on how sure you want to be that all data is gone.
Similar Messages
-
Migration assistant from Old Mac to New(but used) Mac, email recovery.
Recently used Migration assistant (using external as a back-up) to move from an old Mac using Snow Leopard to a new mac using Lion. Lost the use of my entourage with the new Lion OS and I'm swithing to use Apple Mail, but I'm not being successful is transfering my previous mailbox and past emails.
Tried to "import mailbox" from entourage, but I get "Unable to locate Microsoft Entourage mailboxes to import."
Ideas?FireWire cables are dirt cheap and that's how you should be doing the migration. You might have to start over, wiping the new machine's HD, and restoring the software as described in the Everything Mac manual that came with it. See Best Practices and Setup new Mac for more details.
-
Migration Assistant (from old mac)
Hello all,
I just migrated my old data to my new Macbook Pro (from a Macbook) and I have noticed in the Macintosh HD there are some additional folders. Kind of duplicates. These folders are:
Developer (from old mac)
opt (from old mac)
home (from old mac)
backup (from old mac)
I know these are from the migration I did. But I am not sure how my current system uses them. Some are in fact empty (except the Developer and opt) But my question is can I delete these without causes any issues? Or is it best to just leave them alone.
Any suggestions, thanksWelcome to Apple Discussions,
As long as they are marked from old Mac you can safely delete them.
The best time to migrate is when you first boot your new Mac, if you migrate at a later date you can get duplication, or even a new Home folder.
-mj -
after transfering data froAm my pc to mac using windows migration assist, where do the data go to on my mac please?
Welcome to the Apple Support Communities
By default, Migration Assistant creates a new user account where it puts all the transferred data. Just go to > Log Out, and log in the new user that Migration Assistant has created, so you will be able to access to the transferred data.
If you want to merge the data into the first user account, use the Shared folder (it's in /Users/Shared) to put the transferred files there, and then, on the first user, go to the Shared folder and put all the data in the folders you want -
When I migrate from my old mac to a new mac does the data remain on the old mac
when I migrate from my old mac to a new mac does the data remain on my old mac
Yes. You are only Copying the Data not moving it.
-
Used Migration Assistant to successfully transfer PC files to Mini. However file creation or modified date does not transfer. Date of creation is listed as day of transfer. I would gratefully appreciate any help in solving this?
I have the same problem; used Migration Assistant to transfer all my pix from PC to MacbookPro, however dates of pix were not transferred. Date created as the date of transfer. Cannot sort my pix according to date.
Anybody has an answer? -
New directory after Migration (/var (from old Mac)
I just set up a new Macbook Pro, and used the Migration Assistant to transfer my data from my old system. Everything went fine and looks good. However, I'm seeing a top level directory on the new HD:
/var (from old Mac)
I assume it's a copy of the /var directory from the old MBP. My question is - can I safely remove it? It's taking up almost 4gb of space (sure on a 500gb hd that's not much, but if I don't need it...)A A P L wrote:
My (hidden) /var is 4+GB and that's normal.
it depends on how big your swap files get and on whether or not you are using safe sleep which tends to create large sleep image files. so for a laptop 4GB /var might be normal. on my mac pro it's around 600MB as I almost never run out of RAM to need swap files and and I don't use safe sleep. another reason it might get too big if you have a runaway log and /var/log grows too much. there is nothing else in /var that should take a lot of space.
But I agree, I would not delete it in case it's just "visible"
OP: IN the Finder, hit Command-Shift-G.
Type: /private
Get info on the var folder there.
Is it the same as the visible one?
Or, you can Control-click on the Title-bar of the var folder window. The path with show in the drop-down. What does it show?
Message was edited by: V.K. -
I have tried reloading the system and downloading the updates. I am giving this Mac Mini to my father-in-law and I had the same problem before reloading the system when I was trying to load the contents onto my new Mini Server. My solution at the time was to put the mini into external drive mode and use a Firewire cable to connect to the new macmini. I would really like a solution that doesn't envolve buying cables or tearing apart his old computer.
Right now I can't load Migration Assistant on my Mac Mini Server because the Migration Assistant doesn't show up despite various attempts to load it. It is part of the system, so it should be there. I have no reference to this problem because there is no discussion about it or similar problem that appears through google searching.OS X Servers do not have Migration Assistant - this only on client computers.
If you want your father to use the OS X Server it will be a manual data transfer. It can be done over the network, external USB drive or as you mentioned various cables.
TZ -
How to migrate PowerBook G4 Tiger to new MacBook Pro 15" Lion via ethernet cable? Migration Assistant to old to update, apparently.
Ah, a Powerbook. I miss that. Anyways, I believe that the Powerbook G4 has an Firewire 400/800 port. Why don't you do that? It's fast, and you don't have to set up one of those funky reverse wire ethernet cables. I wouldn't use Migration Assistant, but that's just me. Too many issues. I'd start up your brand new MacBook Pro and during the setup assistant, it'll ask you to transfer data from an older Mac. Using firewire with a Target Disk Mode, it's pretty fast.
If you have already opened up your new Mac and are using it, then use Migration assistant, but also with the Firewire (preferably 800). -
I recently bought a new macbook pro and set it up using the migration assistant from my mac mini. I can't get the text message forwarding feature to work with both computers. It keeps saying that I only have 2 devices setup, my iPad and my macbook pro. When I mess with the setting on my mac mini, it goes from saying that that is one of the devices to my macbook pro being the 2nd device. I think that something happened as a result of my using the migration assistant and now it thinks that my macbook pro and my mac mini are one and the same computer. Any ideas?
Thanks, Sig.
The old computer is a 2.6 Ghz Intel Core 2 Duo
The new one is a 2.3 GHz intel core i7
In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem. Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page. Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them.
(I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.) -
Hey, migration from an old mac late 2008 aluminium to a brand new mac book air. Only the new one has firewire. Transmissiom via wifi estimates ~50h. Is there a faster Way to sync? Tanks in advance
I'll venture that your problem here is that you're using two very different versions of Mac OS X. The USB adapter has been useful to me when making big downloads or while using other networks, but it might not be your case.
Here's what I would advise, though it may be less than stellar: Copy the files you need into folders and move them through a USB flash drive or using that external hard drive of yours. (Could the format be the reason your MBA can't see it?). Some stuff like calendars and contacts can be exported too. At least in Lion, I haven't used Tiger in a while.
Good luck. -
Just got an iMac. I am trying to use Migration Assistant. The Mac side seems to be doing it's job, but my PC just keeps "Waiting for the Mac to connect." For over an hour.
Probably a PC issue, you can try calling AppleCare, you are covered for 90 days from the date of purchase and can find the phone number in the owners manual. Also please look over:
http://drtyhnds.blogspot.com/2011/08/how-to-use-migration-assistant-from-pc.html
and
http://pondini.org/OSX/SetupLion.html
Thomas,
It would also be extremely helpful to those trying to help you if you complted your Profile so we at least know what iMac and version of OS X is installed. Click Your Stuff in the upper right then click Profile and complete the necessary fields including what part of the planet you're located. -
How do i speed up my migration from my old mac to the new one?
How do i speed up my migration from my old mac to the new one?
what method are you using? Firewire, ethernet, wireless? I'm assuming you are doing this via Migration Assistant. You can't speed it up if it is in process, but you can use a faster method if available to you. http://support.apple.com/kb/HT4413
-
Migration assistant update for Mac OS X Snow Leopard
Hello -- I downloaded SNOW LEOPARD successfully that past week. I did a software update as well afterwards.
Now in preparation for upgrading to LION OS X, I read an article that mentions one must make sure to have the MIGRATION ASSISTANT UPDATE for Mac OS X Snow Leopard installed. I am unsure if this was included in the software updates I performed. One would assume it would be there. BUT there is not a detailed listing of what these combination updates include. HOW can I tell if I have the desired version required to continue on to LION?
Another suggestion was for one to perform FIRST AID on the start up disk. It only says to select your Mac HD and then to "verify" ..... do they mean to VERIFY DISK or VERIFY DISK PERMISSIONS. I have on occasion performed a REPAIR DISK PERMISSIONS but not the others mentioned. I do not know what the difference is?
THANK YOUI have the same console mesages repeating ad-nasium as you do. What is interesting is I do have the StartuoItems directory but it is empty. The problem I have is that the log-in window comes up as normal, but I can not type in it for about 5-8 seconds. This has started after the latest updates which you mention. Don't know if this issue is related or not. Have deleted the loginwindows and loginitems preferences to no effect.
-
Just got a new imac and my iwork software wont work. I have the serial numbers but after migrating from my old mac running OSX tiger it won't even give me that opportunity. I do not have any discs as this was downloaded. Help
Hi, hopefully you guys can help me out, I just
purchased a G5 iMac to replace my aging dell desktop,
and now i'm more or less completely os x dependant
(I've had an ibook for a few months now). Anyway, I
have a few questions:
1. Does anyone know of a (free) mail notifier tool,
that will alert me when I recieve new pop3 mail? I
used to use AIM for this in windows
The built in email program does sound an alert for new messages.
2. Anyone know of a good (free, again) IRC client?
iChat works well.
3. I noticed earlier that my screen was flickering,
it seems to have subsided for now, but is that normal
to encounter in a new display? It wasn't really bad
flicker, but I could see it.
No idea.
4. I leave my desktops on 24/7x365, will that be a
problem with this iMac? Display shuts off of course
after 30 mins
You could set the iMac to go to sleep after non use. My Macs are
always sleeping when not in use, waking them up takes seconds.
Unlike windoze, never knew if it would be locked up or not.
5. Should I get the extended warranty? I'm usually
against them, but I am expecting this computer to
last me at least 3 years (for $1300 it better!)
before I upgrade, as I got that much out of a Dell
and from what I understand, Mac's do not age nearly
as fast as Windows pc's.
It is well worth the cost. Never know what might happen. Also
it is good insurance for future upgrades. I traded in my G4 tower
purchased two years ago for 75% of what I paid for it. Apple care
transfers, giving the buyer the remainder of your warranty.
Thank you for any help,
-Evan
Maybe you are looking for
-
In-Context Editor can't handle implicit index.html
The In-Context Editor can't handle implicit index.html - e.g., when a menu link points to /subfolder/ with a file named index.html inside, the link works fine on the front-end but In-Context Editor users get a 404 Page Not Found error. Naively, it ap
-
Passing values to XNet Controls (Bug?)
I've run into something that may be a bug. I'm trying to pass some values from a custom Step Type to XNet controls on a VI. The Step Type has parameters added for each type of XNet control, so in the sequence, they are passed as "Step.Xnet_Interface"
-
I am running a tcl script which calls a shell script, which in turn calls 4 shell scripts (for running 4 instances of an executable ). Please don't ask me why (all this), as this is some third party tool. Normally I would run this from scheduler but
-
Hi, following case of a ctl-file: LOAD DATA APPEND INTO TABLE IFC_A_T01 TRAILING NULLCOLS ID SEQUENCE, SKZ POSITION(1:1) TERMINATED BY '$' "RTRIM(LTRIM(:SKZ,' '),' ')", sub object FKZ VARRAY TERMINATED BY '$' ( FKZ COLUMN OBJECT (
-
During user mode hot backup lots of redo gets generated as the entire block is written when any changes are made to a block which is in hot backup mode.But during Rman hot backup less redo are generated why is this so and whatz the logic invloved? an