Migration DESIGNER 6.0 ` DESIGNER 6i

IS SOMEBODY MADE THE MIGRATION OF 6.0 TO 6.I..
IF SO, DO YOU HAD PROBLEMS WITH GENERATION OF FORMS ON THE LEVEL OF THE ITEMS DISPLAY.
(ex LOV is bigger in 6i)

This sounds like you dont have enough space to do the migration and Oracle cannot extend a data file. Make sure you have autoextend on in the target database (I'm guessing it's the target).
Steve

Similar Messages

  • Migrating Designer 2.1.2 to 9.2.0.9, access rights problem

    Hi,
    I am trying to migrate Designer from 2.1.2 to 9.2.0.9 and got some problems in access rights. We have about 30 sub-ordinate users and over 30 different applications in our Repository.
    In Designer 2.1.2, if a user shared a table from an application to another user's application, that user was not allowed to change any properties of the original table. In Designer 9.2.0.9 it seems that you can change the properties in the property palette, but if you try to save the changes, you then get an error message.
    Can somebody tell me if this is really an error or just a feature of Designer 9i?
    Liisa

    Just for the record. I found the solution to my problem. Checking more logs I read this:
    The installation has encountered a unrecoverable internal error. For further assistance report the following information to your support provider.
    "/usr/local/cm/script/cm-dbl-ontape_backup-install RU PostInstall 9.1.2.11900-12 7.1.5.30000-1 /usr/local/cm/ /common/component/database /common/log/install/capture.txt " terminated. Exceeded max time (240)
    The system will now halt.
    So I accessed the Dissaster Recovery Section on CUCM and deleted the tape backup device that was configured there. After deleting it the upgrade went well.

  • Migration Designer 6 to Designer 6i

    We have 20 applications that have made withe Designer 6 and we want to migrate those applications to Designer 6i.
    I want to know, what to consider during the migration
    Thanks

    This sounds like you dont have enough space to do the migration and Oracle cannot extend a data file. Make sure you have autoextend on in the target database (I'm guessing it's the target).
    Steve

  • Migrating Designer Repository 6i to Repository 10g

    My client has an Oracle Designer repository 6i Version 6.5.92.1.9 Release 4.7.(Repository 9i).
    He has created an Oracle Designer repository 10g (latest version) onto another server.
    He wants to migrate his Repository 6i into his new repository 10g.
    Is it possible to do this, if not could you tell me more.
    Thanks

    He ought to be able to use the Export in the Repository Administration Utility (RAU) in 6i to export the repository and Import in the RAU in 10g to import it. Two caveats:
    1. Don't try to go from a versioned repository to a non-versioned one. I think the other way around works, but I don't have mine versioned, so I don't know for sure.
    2. Make absolutely sure that you are using the right EXP for the database version in which the 6i repository is stored and the right IMP for the database version in which the 10g repository is stored. Check the EXECUTE_EXP and EXECUTE_IMP registry settings on each. I've seen a lot of problems that could be avoided by using the right export and import.

  • Migrating Designer 1.3.2 from Oracle7 to Oracle 8.1.7

    Hello,
    Has anyone some experience with migration of a Designer 1.3.2-repository in Oracle7 to an Oracle8i-database (8.1.7)?
    This will probably not be certified, but does it work anyway?
    Thanks,
    Roger Mourmans

    Thank you for your reply, Headstart Team, but unfortunately this wasn't really what I was looking for.
    I've read various migration guides (Designer, Headstart) but what I'm really looking for are real numbers and facts like:
    * what was the amount of time that the migration took at a particular company for a
    particular application (how many forms/reports) ?;
    * Was the migration a (relatively) smooth operation ?;
    * Were there any particular hick-ups ?
    I hope someone can supply me with these...
    Regards,
    Martijn Sanders

  • SSDM 3.1 PROD - Migrate design from version 691 to 700

    Hello SSDM Team,
    We have about 150 ssdm/svn designs and we need migrate the tool from version 691 to version 700.
    I noticed that the tool doesnt let to save a connected design to svn on top of the design in the workarea and after commit it directly to the svn repository.
    We need to execute a lot of steps to migrate each design. First we have to "save as" the design outside the workarea, exclude the design in the svn repository, exclude the design in the workarea, copy the design saved in other folder into the workarea, and finally import the design to the svn repository.
    Imagine do it for 150 designs, managing the users and their designs and so on......
    I'd like to know if there's a easier and maybe an automatic way to do this job.
    Regards
    Nelson Alberti da Rosa

    Hello Nelson,
    Data Modeler 3.1.1 is published and you can upgrade in place versioned designs created with DM 3.0.0.665 or DM 3.1.0.691 - i.e. you can do Save for such designs.
    Regards,
    Philip

  • Migration Designer 6i to 10g /New Headstart version?

    There is very limited information on the OTN for Headstart at least that I could find.
    I had a few questions and any help would be very much appreciated.
    We are planning to migrate from
    -Designer 6i
    -Headstart 6.5.1
    -Forms 6i (client/server)
    -database: Oracle9i Enterprise Edition Release 9.2.0.5.0
    to
    Developer suite 10g (10.1.2.0.2 ) 10gR2
    -database: Oracle 10g
    Is there a new version of Headstart available and certified for Designer 10g? If so what exact versions of database/forms/application server is it certified for?
    Is there technical documentation available online that I can download?
    Thanks in advance !

    There is a newer version of Headstart available, that version (6.5.4.0.1) is also certified for Oracle Developer Suite 10gR2. I can't tell you if it is the latest version.
    Headstart is a product of Oracle Consulting. You have to purchase it from Oracle Consulting. Ask for iDevelopment Accelerators Package.

  • Migration Designer 6i to Designer 10g with Forms generation

    Has anyone done a migration from 6i Designer to Designer 10g with Forms generation?

    There is a newer version of Headstart available, that version (6.5.4.0.1) is also certified for Oracle Developer Suite 10gR2. I can't tell you if it is the latest version.
    Headstart is a product of Oracle Consulting. You have to purchase it from Oracle Consulting. Ask for iDevelopment Accelerators Package.

  • MIGRATION DESIGNER REPOSITORY 6.0 to 6i

    I've tried to migrate repository 6.0 to 6i but in process i recive the error message:
    ORA-03232 unable to allocate extent to tablespace ...
    ORA-02063 error from link ...
    RME-02124 failed to excute SQL statement CREATE TABLE UPG_RM_TEXT_LINES ...
    I have read the solution of note but the problem persist.
    Someone can help Me
    Thanks in adv
    Domenico Navarra
    Italy

    This sounds like you dont have enough space to do the migration and Oracle cannot extend a data file. Make sure you have autoextend on in the target database (I'm guessing it's the target).
    Steve

  • Designer Repository Migration: 9i to 10g

    Hi All,
    We need to migrate designer repository from oracle 9i to oracle 10g.
    Please give us the steps to do it.
    Thanks in advance.
    Regards,
    Ateet

    Please follow :
    http://www.oracle.com/technology/products/designer/supporting_doc/des10g_9046/cmnhlp72/rep_insgde/igrepos_904.htm#UpgradingAnExistingRepository
    http://www.oracle.com/technology/products/designer/documentation.html
    Regards
    Rajesh

  • Migrating from 9i to 10g designer

    Is there documentation on migrating Designer/Repository from 9i to 10g.
    We have a 9i database and 9i designer. What are the specific steps to be done.
    I know oracle normally has a migration path for its products.
    any tips would be helpful.

    Documentation is in the release notes. Actually, it is quite simple.
    First backup your Repository with the Repository Administration Utility (RAU).
    Install Designer 10g - this can be done in the same ORACLE_HOME as 9i or in a new ORACLE_HOME if you wish. Do this for all Designer users that share your Repository - once you upgrade the repository, old versions of Designer won't be able to use it.
    Then start RAU again. You will notice that the Upgrade button, which is normally grayed out, has become active, and some of the other buttons are grayed out. Use the Check System Requirements utility to make sure that your Repository Owner has all of the needed permissions and that other configurations are correct. It is particularly important that the registry settings that point Designer at "imp" and "exp" point to versions that are compatible with your database version. By the way, the latest version of the Repository requires at least Oracle 9iR2.
    Finally, press the Upgrade button and start the upgrade. This will take a while but went pretty smoothly for me.

  • Sharepoint 2007 Sharepoint Designer Workflow migrate to Sharepoint 2013

     SharePoint 2007 sites migration to SharePoint 2013, in SP2007 I have several workflows created using SharePoint Designer. Is it possible to migrate those Workflows to SharePoint 2013? If so,  is SharePoint 2013 Workflow
    Manager needed to run those Workflows?
    BTW, I will be using third party migration tools to migrate SP2007 content to SP2013.

    Hi John
    I know one third party tool which is best in migration and it migrates designer workflows also
    http://en.share-gate.com/sharepoint-migration
    http://en.share-gate.com/
    Please mark it as answer if it helps you finding your answer
    Amit Kotha

  • JHeadstart Designer Generator not in JHeadstart 10.1.3

    What is the reason that JHeadstart 10.1.3 does not include the JHeadstart Designer Generator (JDG)? Why is JDG in 10.1.3 under consideration? Are there any better alternatives to migrate Designer applications to JEE applications?
    Regards,
    Rik

    Rik,
    The reason is that the JDG uses the Adf Business Components Generator under the covers which is no longer supported in JDeveloper 10.1.3.
    See chapter 4 of the developers guide, which explains how you can use JDev 10.1.2 to do the migration, and then proceed with JDev 10.1.3 to generate the application. It's not ideal, but it works OK.
    For a more thorough discussion of forms migration and alternatives, see the last section s of this white paper:
    http://www.oracle.com/technology/consulting/9iservices/JHeadstart%20White%20Paper.pdf
    Steven Davelaar,
    JHeadstart team.

  • Designer download

    Where can the latest Designer patch be downloaded that does not require an existing repository installation?
    I want to install it on Vista, but 10.1.2.0 will not install on it for me.
    Thanks,
    Erica

    http://www.oracle.com/technology/software/products/designer/htdocs/winsoft.html
    Oracle Designer 6i Release 4.11 for Windows
    It is not supported.
    I do not know what you want it for. But you can downlod a new tool that has an ERD and lots of other stuff from:
    http://www.oracle.com/technology/products/database/sql_developer/files/Modeling.html
    try it out. Youcan even migrate Designer repository to it.

  • Install Designer on a virtual workstation

    Hi,
    We are using a comany wide server based comptuting (SBC) platform. Until now all Oracle developers did not use this platform because of install problems on the virtual workstations.
    Now we are planning to migrate Designer from 9i to 10g. Does anyone has any experience with installing Designer / Forms Builder on virtual workstations?
    Regards,
    Roel

    If you are talking about installing Designer on a unix machine with a virtual windows interface it does not work.
    Designer needs to be on a window platform.
    However if you have a windows server there are some that have gotten that to work. But I do not know how they did it.

Maybe you are looking for

  • Field symbols and logical databases

    Hi, How to use field symbols in an abap HR program with logical database? For most of the reports and interfaces in HR, I have used GET PERNR with logical database to fetch data from the tables. I understand that this method of programming using logi

  • AR Aged Recivables

    Hi gurus, I have a report to age open items in 30days buckets (0-30days,31-60days,61-90days and 90+) and out of like over 100 company codes, I noticed that like 4 or 5 company codes are aging the documents in a different bucket from what SAP R/3 ages

  • Show "No Applicable Data Found" for Report 0SD_C01_Q22

    Hi Gurus, I just activated BI Content Report, 0SD_C01_Q22 and it's relevant InfoSource,  DataSource and so on. The data from R3 were loaded into the infoCube successfully. However, it shows "No Applicable Data Found" when I executed the query. I have

  • Bug in 6.1 SP6 + 8.1 SP2 in WebAppServletContext.setAttribute

              Althoug I found a depending Fixed Problem Message for BEA 7.0, I get the following           NullPointer Exception with BEA Weblogic Server 6.1 SP6 (in SP 4 it works fine)           and in 8.1 SP2.           The J2EE Spec allowes to use set

  • Import from a Lide Scanner

    I own several versions of Photoshop Elements (PSE).  In V8, I can import scanned images from my Canoscan Lide 500F scanner.  Recently, I purchased PSE V11 only to find that this facility is not available. Question, will the facility ever be available