Migration / Emulation for 3.x Objects

Hi ,
Though I have BI 2004s currently I have installed BW3.5 Objects (FIAP ODS, CUBE and InfoSources) with <u>In Data Flow Before</u> option.Later I will go for either Emulation or Migration option to convert them into 2004S objects.
Are there any certain steps to be followed to install BI 3.5 Content objects in BI 2004S system? pls guide me.
I have taken the objects given below:
Datasource: 0FI_AP_4 ( Not yet connected to 2004S system)
ODS: 0FIAP_O03
CUBE: 0FIAP_C03
The bottom line is I want to work on the 3.x objects later it needs to be converted into 2004s objects. If someone gives me the step by step approach I really appreciate your help by rewarding the points

1)Replicate datasource as 3.x NOT new
Above DS acts as Emulated
2)Follow same steps as in 3.x ,install business content...load objects
For Migration follow below link
Transformation Rules
Hope it Helps
Chetan
@CP..

Similar Messages

Data Migration - SSIS Transfer SQL Server Objects Task or something else

Can someone please kindly help me with this.
Scenario
I have a requirement to transfer selected tables and views (with a specific schema) between two databases which reside in two different servers. In the interest of clarity I will call my databases DB_A and DB_B respectively. Please note that these databases
are NOT on the same server.
Transfer of these objects (tables & views) happens once a month. 99% of the objects in question will be of the same name and schema between the two databases as the ones migrated from the previous month. However, metadata definitions may change on DB_A
and those changes are supposed to be reflected on DB_B along with the associated data. This therefore means that each time a transfer/migration happens; objects in DB_B are dropped first and completely replaced by objects from DB_A.
Problem
What is the best way to achieve this?
My first attempt has been a go on the Transfer SQL Server Objects Task
in SSIS. The problem that I have is that when using Transfer SQL Server Objects Task
I don’t know how to filter objects in DB_A so that only objects with a specified schema can be migrated.
Transfer SQL Server Objects Task appears to be the best solution to me to accomplish my requirement but I can’t filter the desired objects by schema. Someone suggested using C# but my C# skills are not that eloquent.
May someone kindly help please, or possibly suggest any other way which can be handy to fulfil my requirements.
Many thanks,
Mpumelelo

Hi Prashanth
Thanks for your response. There is one problem though in my case. I’m sorry I forgot to mention this in the original question. When the objects are moved from BD_A to DB_B the schema in DB_B changes. That is, schemas are not the same between the source and
the destination database. How do I handle that with the solution that you have suggested?
Many thanks,
Mpumelelo

Lack of Migration support for 6.0 & 10g users

Hi,
One of the 1st things we wanted to do with the beta as an existing customer is to validate migrating a project from our existing Production version (6.0) to 11g.
While the import appears to work, opening any imported diagram throws an XML parsing exception.
After raising an SR, it turns out that migrating from previous versions is unsupported until 11gR2.
This puts me in a tricky spot as one of the main business drivers to adopt 11g is product upgrade.
I am very surprised to see existing customers nt being catered for in the new version, as running multiple versions in Prod is not a realistic option for most.
Backwards compatability is therefore very important to the existing user base!
So, questions for Oracle:
1. Can you please reconsider the lack of migration support for R1?
2. if this feature cannot be working for R1, what is the expected release date (even if its just a quarter) for R2?
3. To save my time, is there a list of what other features are not for going to be available in the Beta / R1 release?
As a Beta tester my time is precious, and I need to know what I can expect to work, rather than report issues only to then find out that its not supported...
Thanks,
Ian
.

Hi Ian,
You are right in the sense that upgrade will be supported in BPM 11gR2. More specifically, the upgrade will support OBPM 10gR3 to BPM 11gR2. Customers in older versions of OBPM and ALBPM will need to upgrade to OBPM 10gR3 before attempting the upgrade to BPM 11gR2. To upgrade to OBPM 10gR3, there are a series of pointers in our documentation on how to do this. I can explicitly provide links if you are interested in this mandatory upgrade before moving to BPM 11g.
As per the reason for not being able to support upgrade in this first version of BPM 11g, it simply boils down to time to create the new unified BPM platform which in itself is a major undertake from an Engineering perspective. Once the foundation is complete (this is the objective for BPM 11gR1), we will start working on completing the delta to upgrade OBPM 10gR3 projects to BPM 11gR2 as best as possible. There is a document we have been sharing with customers with Best Practices for implementing OBPM 10gR3 projects with idea of an upgrade to BPM 11g. We do have significant knowledge on some pieces that we will be able to automate from a migration perspective and some others that will be hard to upgrade. If you are interested in this document, we can provide this to you.
If you have any other questions, please let me know. I would be more than happy to assist with migration questions with the most up to date knowledge I have on this front.
Regards,
eduardoc.

Migration Program for new General Account

Hi Gurus
Is there any standard migration program for new G/L Accounts.
or please tell the process of how we migrate data to New G/L accounts.
Thanks
Arun

Hi,
There is indeed a migration program to transfer the G/L accounts data to SAP. You can use LSMW tool to migrate the data.
Program Name: RFBIBL00
Program Type : D (Direct Input)
Object : 0100
Method: 0000
Regards,
Asif Ali Khan

Unix: Any support for creating com objects?

I'm looking into migrating a CF 8 server from Windows to
Unix. I see in the documentation for CreateObject that com objects
are not supported on Unix, "Note: On UNIX, this function does not
support COM objects."
Obviously, this won't work on Unix: Note:
<cfset image = CreateObject( 'com', 'ImageStoreCom.Image'
)>
But what about this, can I create a remote com object?:

<cfset image = CreateObject( 'com',
'ImageStoreCom.Image', 'remote', '172.0.0.1' )
Finally, if the example above is out of the question, are
then any techniques for exposing a com object to CF on a Unix box?
I'm wondering if maybe I could write a Java wrapper for the com
object and expose it that way?
Thanks for your help,
DJ

<ShotInTheDark>You might try wrapping your COM object
in a .NET class then accessing your .NET class
remotely.</ShotInTheDark>
http://livedocs.adobe.com/coldfusion/8/htmldocs/help.html?content=dotNet_02.html#1160020

How to migrate Themes, HTML templates, MIME objects to ECC6.0

Hi Friends
How to migrate Themes, HTML templates, MIME objects which are developed in SAP Web@Studio.
or How to use program SIAC_UPLOAD ??
regards
siddharth

Hello Murray,
Your steps sound correct. I would add that you generally need the following:
1. publish the IAC, SYSTEM, and WEBGUI Internet Services (also from SE80)
2. make sure the Integrated ITS is working. Meaning you should activate the ITS in the profile parameter, this can be seen in transaction SITSPMON. Some services in transaction SICF also need to be activated, like the default_host/sap/public/bc/its
From your error message though it looks like the URL you have used is either incorrect or you have used the External Alias feature in SICF? The URL for the ITS is usually http://host:port/sap/bc/gui/sap/its/service. Second, the error is about a language resource file (.htrc), you have not specified if you created one or not. To create one in the language you are logged in with just go to SE80, open your Internet Service and double click on the "Topic xx". Don't forget to publish after creating and saving it.
Edgar

[SOLVED] internal error Cannot find suitable emulator for x86_64

Hi,
After a reboot due to unrelated issues, virt-manager is not showing any of the VMs I had configured via qemu:
I checked connection properties, and everything else is showing up correctly, like the networks and storage. I tried to create new VMs out of existing storage and got this message:
Googling it suggested this happens when KVM module is not loaded. I modprobed kvm, kvm_intel and still got same result.
Systemd gave me the following:
% systemctl status libvirtd
libvirtd.service - Virtualization daemon
Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled)
Active: active (running) since Sat 2013-06-08 08:55:19 IST; 29min ago
Main PID: 1499 (libvirtd)
CGroup: name=systemd:/system/libvirtd.service
├─ 834 /sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf
├─ 863 /sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/nat_static.conf
├─ 881 /sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/closed_dhcp.conf
└─1499 /usr/bin/libvirtd -p /var/run/libvirtd.pid
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:08:20 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:08:20 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:08:35 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:08:35 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Googling that seems to indicate that this happens when virtualization is disabled by BIOS. But cpuinfo tells me that vm is supported:
% grep vmx /proc/cpuinfo | uniq -c
8 flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid
Can anyone help me? Has anyone else faced a similar problem?
Here are some version info:
local/libvirt 1.0.6-1
API for controlling virtualization engines (openvz,kvm,qemu,virtualbox,xen,etc)
local/qemu 1.4.2-1
A generic and open source processor emulator which achieves a good emulation speed by using dynamic translation.
Of which, qemu got updated just today. I will try rolling back to older version and post and update.
Ninja edit: Looks to be qemu. Just running qemu gives me this error:
% qemu-system-x86_64
qemu-system-x86_64: error while loading shared libraries: libiscsi.so.1: cannot open shared object file: No such file or directory
EDIT: The resolution was
pacman -S libiscsi libaio
systemctl restart libvirtd
EDIT2: Made subject line better searchable
Last edited by railmaniac (2013-06-08 04:19:24)

HI,
First of all thanks a lot for this post. I am facing the same issue since yest.
After reboot, my VMs gone missing and even virt-manager was not working (as shown in the screenshots which you have pasted in your post).
Now after trying out the workout which you had mentioned, I am able to get the virt-manager working.
But I am not sure if I can get back my missing VMs .
I am new to linux. Kindly guide me on how I can get back those VMs.
[root@skoduri lib64]# ls /etc/libvirt/qemu/
networks rhel6-vm2.xml rhel6.xml
[root@skoduri lib64]#
[root@skoduri lib64]# ls /etc/libvirt/storage/
autostart default.xml storage_1.xml
[root@skoduri lib64]#
[root@skoduri lib64]#
Thanks,
Soumya

Using a Variable in SSIS - Error - "Command text was not set for the command object.".

Hi All,
I am using a OLE DB Source in my dataflow component and want to select SQL Query from the master table I have created variables v_Archivequery
String packageLevel (to store the query).
<Variable Name="V_Archivequery" DataType="String">
     SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
     FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
     ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
     Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)
    </Variable>
I am assigning this query to the v_Archivequery variable, "SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)"
Now in the OLE Db source, I have selected as Sql Command from Variable, and I am getting the variable, v_Archivequery .
But when I am generating the package and when running I am getting bewlo errror
Error at Data Flow Task [OLE DB Source [1]]: An OLE DB error has occurred. Error code: 0x80040E0C.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E0C Description: "Command text was not set for the command object.".
Can Someone guide me whr am going wrong?
Please let me know where am going wrong?
Thanks in advance.
Thankx & regards, Vipin jha MCP

What happens if you hit Preview button in OLE DB Source Editor? Also you can use the same query by selecting SQL Command option and test.
Could you try set the Delay Validation = True at Package and re-run ?
If set the query in variable expression (not in value), then Set Evaluate As Expression = True.
-Vaibhav Chaudhari

How to find the number of references created for a given object ??

How to find the number of references created for a given object in a big application environment.
That means, if i give any object name (of my application) as input, then how can i find the[b] number of references created for that particular object ??

Please do not post the same question multiple times.
As for your original question, there is no direct way to do it.
Especially not the way you phrased it,
since objects don't have "names".
Applications also don't have "names".
They have classes and instances.
Also, there are 2 related issues, and I'm not sure which one is the one you asked.
#1. Finding the number of references to the same object.
Eg.
Map<String,String> a = new HashMap<String,String>();
Map<String,String> b = new HashMap<String,String>();
Map<String,String> c = a;In this case, there are only 2 objects.
The first object has (at least) 2 references pointing to it.
The second object has (at least) 1 reference pointing to it.
(There may be more, if the HashMap library keeps
references to these things, or if the HashMap object has
some internal cyclic references...)
If you're asking this, then it can't be done.
It's an active research topic in universities
and software research labs, called "alias analysis".
Type it in google, and you'll see people are working hard
and having little success so far.
#2. Finding the number of instances created from a class.
In this case, what you have to do is to add a counter to
the constructor of the class. Every time an object is constructed,
you increment the counter. Like this:
   class MyClass
       public static int counter = 0;
       public MyClass( ) { counter++; }
    // Then later in your program, you can do this:
    MyClass a = new MyClass();
    MyClass b = new MyClass();
    System.out.println(MyClass.counter); // It should show 2Note: you won't be able to do this to every class in the system.
For every class you care about, you have to modify its constructor.
Also: when an object is deleted, you won't always know it
(and thus you won't always be able to decrement the counter).
Finalizers cannot always work (read Joshua Bloch's
"Effective Java" book if you don't believe me), but basically
(1) finalizers will not always be called, and
(2) finalizers can sometimes cause objects to not be deleted,
and thus the JVM will run out of memory and crash

Increase the number of portions in process for each conversion object

I experts,
I configured SAP TDMS 3.0 with SP 14 to transfer test data from QAS to DEV (both is ECC 6.0) for the first test with TDMS TIM (Time Based Reduction).
The data transfer phase is still running (99% - 60hs running). We analyzed the Display Runtime Information report and see that objects of conversion with similar calc. records and calc. GBytes have very different the Net Runtime.
TMDS currently is working with four objects of conversion, processing a portion of each.
Conversion objects that are running are:
- Z_LTBP_002
- Z_TSEGE_002
- Z_VEVW_002
- Z_YST27_002
We check in the receiver system, and we see that is use only one DIA process to update the each table.
How can increase the performance of the update? Is correct that use only 1 DIA process for this??
Can I increase the number of portions in process for each conversion object?
Any help is greatly appreciated.
Regards,
Sergio

Hi,
Check SAP Note 916763 - TDMS performance composite SAP note
Note 890797 - SAP TDMS - required and recommended system settings
Thanks
Sunny

Crystal Report Templates for User-Defined Objects

Hello Experts,
I am running SAP B1 8.8 PL11. In the current patch SAP has default Crystal Reports that can be used as Layouts for Invoices, Credit Memo's so on. Is it possbile to have layouts for user defined objects ( say for instance i have a customized form under sales module, can i import a crystal template for this customized form?). In the report layout manager i don't see an option to import user-defind objects.
Any help would be appreciated.
Thanks,
Praneeth

If this is still a problem please re-post to the SAP Integration Kit forum.

Interval 01 was not created for number range object HRTEM_REFN

Dear expert!
Now, I'm getting some issues in Training and event management module.
- The first, I created business event
- Second, I process to book for business event by tcode: PSV1 --> book --> book/payment info --> activity allocation.
But when I was booking, the system displayed error: "Interval 01 was not created for number range object HRTEM_REFN"
Help me, please!
Best regards, Huy!

Go to the customization as below
Training and event mgt>Basic settings>Number range maintanence>Define number ranges for External operation
and maintain number ranges as 01 Internal
Hope ur problem will solve
with regards
partha

Multiple Transports for the Same Object.

I have ABAP program 123 and I make a change, create transport A and release the transport. I do not request transport A go to production.
I then modify ABAP program 123 again, create transport B and release the transport. I do not request transport B go to production.
Now I request transport A go to production.
Can someone explain to me why the changes in transport B are included when transport A is moved to production?
I thought each transport would be at its own change level.
Thank-you.

I can guarantee all of you that when Transport A was moved, it contained changes that were made in Transport B.
Surely you understand that Thomas is correct and that there's a logical reason, not related to transport layer configuration, for the issue? You CAN have multiple transports open for the same object without a lock by forcing it but check the dates as already suggested...

How do I set up an emulator for testing my application?

I'm starting to wade into GPIB and cannot seem to find the best way to continue given all the components (not meaning ActiveX) required to assemble a semi-reliable development and testing environment for beta rollouts.
I have set up my design environment. Now I need a way to emulate some of the equipment I will be developing for so that I may test my apps before final testing on the actual equipment (which I obviously have no access to at this point).
Given that.. am I correct in understanding that LabView or IVI allows this type of functionality? If so, here are my specific questions regarding development:
1) Do I currently need any hardware or can the GPIB device list be populated from IVI/LabView emula
tors? In other words... how do I make the 'link' between these two technologies?
2) Can IVI/LabView run on the same machine as my test application, or is a secondary machine required?
3) Is there a general punch list of software (LabView, etc.) I might need in order to get this going?
4) Any general (or specific) overviews that may help me get over this hump would be greatly appreciated.
Charles

Whether or not you are able to simulate your hardware will depend on what method you are using to program it. If you are programming the instrumentation directly using the GPIB ActiveX control or GPIB calls directly you will not have the ability to do simulate in software. If you are using an instrument driver, however, you will be able to do simulation if the instrument driver is IVI compliant.
Assuming that you are using an IVI-compliant instrument driver, here are the answers to your questions:
1. You do not need any hardware whatsoever. You can either specify to use simulation in your code by using the InitWithOptions functionality and specifying "SIMULATE=TRUE" in the option string parameter. You can also set things up externally so that you can alter simulation strictly through the IVI configuration so that your code doesn't have to change.
2. It will run on the same machine as your code. As far as your application is concerned, it will not appear any differently however no GPIB communication will occur.
3. IVI compliant instrument drivers for all of the GPIB hardware you are using. These are available for download from ni.com.
4. I think that there may be some IVI-related application notes.
Assuming that you are not using an IVI-compliant instrument driver and instead are either using a non-IVI instrument driver or making GPIB calls directly, things can get a little more elaborate. If you want full emulation capability you'll need to write another piece of software that emulates your device. This can be done in LabVIEW or any other ADE of your choice. What you'll need is a second GPIB card (to act as your device) that you'll cable to from your main computer. That card can live in a second machine or in the same one as your main application. You may want to put it in a separate test machine just to keep things a little cleaner.
If you go with this approach, it's not too difficult to write an emulator for a single device (or at least that functionality of a device that you use) per GPIB card. It will be more difficult to write an emulator that emulates multiple devices using a single GPIB card. In other words, you may want to use a separate GPIB card for each instrument you want to emulate. I wrote such an emulator some time ago but can't seem to find it. In any case, it's probably only a couple of days effort.
To make a long story short, your life will be a lot easier if you have IVI-compliant instrument drivers available for the hardware that you are using.
Jason

How to delete the index for the business object BUS0033

Hi to all experts,
I'm applying note 1349496 the error here is no records with F4 help for the funds center .
solution from the note
Implement the attached program corrections. Then, in the transaction, delete the index for the business object BUS0033, reactivate it, and start the indexing in the indexing mode "Full". The system then displays the data correctly in the F4 search help.
how to do the second part i have already applied the note .

any help

Migration / Emulation for 3.x Objects

Similar Messages

Maybe you are looking for