Migration erp system aix to windows

Hi,
I want to migrate my erp system on another platform.
Now I am able to migrate my database.
But I am not able to migrate my application Application version is 11.5.10.2
If any body knows please help me.
Currently we are using Aix server and wants to migrate from windows server.
Thanks

Hi,
At a very high level, one option is to install R11.5.10.2 on your Windows server and patch to the same level as your AIX server. Then migrate your database (exp/imp) and rerun autoconfig to setup everything correctly.
For detail the following documents might be a good start:
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=238276.1
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=230627.1
Regards,
Gareth
Blog: http://garethroberts.blogspot.com/

Similar Messages

SAP Printer migration from AIX to windows

Dear Experts,
We migrated our ECC from AIX to Windows.
We want to migrate printers from AIX to windows.
Do we have to create queues from scratch in SPAD?
Can we use existing queues in SPAD?
Please guide what all steps are required.
Your help will be highly appreciated!
Thanks,
Harry

Hi Hary,
For windows environment you need to change the spool server hostname in SPAD and activate all the relevant printers.
Please check whether you had any network printers configured on AIX host. You can use command
smitty spooler or
lpstat -W -p<queuename>
If there are any spoolers configured for SAP system, you need to recreate them on windows.
Hope this helps.
Regards,
Deepak Kori

DMS Migration from AIX to windows

Dear All,
We are in process of migrating of SAP landscape from AIX to windows.
We have idea of migrating ECC and BI from AIX to windows. But we are confuse, how to migrate SAP DMS from AIX to windows.
Need you suggestion how to proceed futhure for moving DMS from AIX to windows.
Thanks
Anil

Hi,
1) Does oracle support this kind of migration?Yes.
2) Is this achievable, without involving any functional consultants? You do not need any functional consultants for this migration.
3) Can anyone help with some metalink notes or document on this migration?Please see these documents.
Note: 369693.1 - Using Oracle Applications with a Split Configuration Database Tier on Oracle 10g Release 2
Note: 304489.1 - Using Oracle Applications with a Split Configuration Database Tier on Oracle 9i Release 2
4) Is it a good idea to move from AIX to windows?Windows? Hmmm :)
Regards,
Hussein

Testing of SAP BW system after migration from OS Unix to windows

Hi Experts,
I am working on a project wherein testing of BW system is required after migration from OS Unix to Windows.
If any one has done same set of activities in past or has any idea of this, please share all major test steps required after migration.
Thanks in advance.
Regards,
Neeraj

Hi Neeraj,
I will paste the list we used for our upgrade from 3.1 to 7.0. I removed some company specific details. Sorry for the "lay-out", it is copied from excel, this messes up the whole message.
best regards, André.
Preparation     PHASE 1
Review New Functionality     Review BW section on SAPNet for latest information on new release
Confirm Upgrade Timing (First Sat)
GUI Upgrade     Install GUI's for Upgrade Test persons
"Check Prerequisites     -Operating System
-SAP Kernel
-DBMS
-Disk space
-R/3 plugin
-BW software version and SP
Citrix.."
"Check Compatibility Reqs with other systems     APO
ECC6.0"
Check Compatibility Reqs with 3rd party software     ?
"Test Team 2004s Delta Training     To
have idea on new functionality
not have confusion if looks different.."
"End User Communication: upgraded system and changes     e.g. right vs left click
- send out communication twice"
End User Communication: several "look and feel" sessions NOTE: incorporate WISBECH !!!
Setup Portal connected to BW QA for testing once upgraded     Setup Portal connected to BW DEV for testing once upgraded
Check best go live date - based on assuption 2 days needed
Determine test set - based on input BS / KU
Estimate resources Business for testing
BluePrint     PHASE 2
Check/CleanUp Development Objects     Check all open and not-released developments for release prior to upgrade
Prepare System Setup     Prepare (if needed) flat-files for test loads
Check OSS for release notes on objects     Each functional area should check out OSS for release notes on objects (for changes etcu2026, new functionality)
"Prepare (detail) list of objects to be tested     Complete list of objects to be tested, special attention to custom/non-standard programs, enhancements. List of:
- extractors
- process chains
- reports"
"Setup delta mechanisms (create transaction data)     BackEnd Test: Financial Extraction and load, process chains
u2022tbd
u2022
u2022 "
Verification / creation of process chains     Check existence of to-be-tested process chains; if none, create 'sample' process chains
Realization     PHASE 3
Prior to Upgrade: Install any necessary frontend software
Prior to Upgrade: Install any necessary frontend software (end-users)
Prior to Upgrade: Complete any extraction - suspend V3 and scheduled BW jobs
Create Sandbox
Connect Sandbox to external systems (connections/BDLS)
Pre-upgrade steps
Perform Upgrade of BW
Check connection with R/3/APO
Perform system backup
"BackEnd Test: Logistics extraction and load, process chains
u2022 Z_example_CHAIN
u2022 2lis_03_BF and 2lis_03_BX     Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Sales Extraction and load, process chains
u2022 Z_SALES_1
u2022 all lis extractors:
u2022 12_vcitm
u2022 13_vditm
u2022 11_vaitm
u2022 11_vahdr
u2022 11_v_ssl
u2022 11_vasti
u2022 12_vcscl
u2022 selection of z-extractors
     Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Financial Extraction and load, process chains
u2022 0FI_GL_4
u2022 NOTE: no further extractors are chosen for testing
u2022 tbd     Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Master Data... Extraction and load, process chains     Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Zxxx Extraction and load, process chains
u2022 Z_TRANSACTION_DATA
u2022 Zxxx
u2022 Zyyy     Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Plant Maintenance Extraction and load, process chains     Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
BackEnd Test: PP Extraction and load, process chains     Test: load from Zxxx
"BackEnd Test: Purchasing Extraction and load, process chains     Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: APO Extraction and load, process chains
u2022 ZAPOxxx
u2022 ZAPOyyy
u2022 others can be tested, but were not included in de testset     Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
BackEnd Test: Regular Schedule - Production
BackEnd Test: Flat file upload     Test: 2 types from server and PC
BackEnd Test: Test Admin Workbench: creation of objects, change existing     Test the Admin Workbench: creation of infoobjects, change infoobject, create/change hierarchy, create cube,u2026
BackEnd Test: Test Bex: creation of queries (kf etc...); change existing     Creation of new query/ change query, create condition, calculated/restricted kf, variables,..
BackEnd Test: Issue handling
Development box issue fixing - on forehand     apply fixes based on issues BWQ
FrontEnd Test: Run Logistics Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Sales Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Supply Chain Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Financial Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Controling Reports     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Master Data and Special Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run PM Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Purchasing Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run APO Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Issue handling
FrontEnd Test: Make before image of reports - Production     Run reports; save of before image to compare once upgraded
FrontEnd Test: Run All Reports - Production     Run reports, execute various navigation steps, compare with 'before image' taken in prevous step
Test Security     Test security with various end-user roles/IDS other than BW developer (usually has * ALL)
Test Portal integration     Test portal with various end-user roles/IDS other than BW developer (usually has * ALL)
Edited by: A. Nagelhout on Feb 12, 2010 10:50 AM
Edited by: A. Nagelhout on Feb 12, 2010 10:50 AM
Edited by: A. Nagelhout on Feb 12, 2010 10:52 AM
Edited by: A. Nagelhout on Feb 12, 2010 10:52 AM

Migrating from AIX to Windows

Hi all,
We are considering in a SAP R/3 4.6c to ECC6 Upgrade, the option to migrate from AIX to Windows OS.
We heard that this option is not so usual.
- Could you tell us some feedback and recommendation about it?
- What kind of issues will we face?
Thanks for your help,
Chris

> We are considering in a SAP R/3 4.6c to ECC6 Upgrade, the option to migrate from AIX to Windows OS.
>
> We heard that this option is not so usual.
Usual? What is "usual"?
> - Could you tell us some feedback and recommendation about it?
> - What kind of issues will we face?
This depends heavily (if not only) on your environment. Some thoughts:
- Windows is little endian whereas AIX is big endian; this may affect connected software (non-SAP software, filesystem transfers etc.)
- additional software plus licenses may become necessary (cluster, backup...)
- do you have enough knowledge about Windows (+ its internals) as you have on AIX? Windows is not "easier" by default just because you have a mouse to click... (even if everyone thinks it is). Windows administration is totally different to any *nix (you may need to change scripts, consider updating regularly, think about problems you didn't have before (Virus, Worms) etc.)
- Hardware for Windows is usually cheaper than Power based hardware for AIX
- Windows licenses (+ CALs) must be bought
Just as another thought: Did you consider running Linux instead? You will use the same (cheaper) hardware with a more common environment (if you come from AIX)?
Markus

TREX Migration from HP-UX to Windows

Hi Experts,
I want to migrate TREX 7.0 on HP-UX to TREX on Windows. Is there a way to transfer existing indexes from the HP-UX system to the new TREX system running on Windows?
Thank you,
Rainer Walter

Hi Joseph,
thank you for your recommendation. Importing the indexes of the HP-UX TREX on the Windows TREX was exactly what I did. The Search function in TREXAdmin on the Windows system returned an error when trying to view the index content, throwing an error message. The TrexIndexServerAlert trace file contains entries like:
[2652] 2009-08-04 15:02:20.458 e TREX_C_STORE CSFile.cpp(00576) : ERROR: fileName: <D:\usr\sap\TPD\TRX65\index\4546326923980b66e1000000ac13838ecrd120\en\settings.read.offset>
[2652] 2009-08-04 15:02:20.458 e TREX_C_STORE CSFile.cpp(00577) : reading 1073741824 bytes failed, got 68 bytes
[2652] 2009-08-04 15:02:20.458 e TREX_C_STORE CSFile.cpp(00717) : read('D:\usr\sap\TPD\TRX65\index\4546326923980b66e1000000ac13838ecrd120\en\settings.read.offset',rb) failed with error 111 (file at eof), 1 global open files
[2652] 2009-08-04 15:02:20.458 e TREX_C_STORE OffsetContainerVector.cpp(00096) : ERROR: initFromFile()
[2652] 2009-08-04 15:02:20.458 e TREX_C_STORE OffsetContainerVector.cpp(00097) : + reading from file failed
[2652] 2009-08-04 15:02:20.458 e TREX_C_STORE FileHandle.cpp(00862) : ERROR: readOffsetInfo()-Problem
[2652] 2009-08-04 15:02:20.458 e TrexStore    IndexSettings.cpp(00203) : error opening settings filer object in CSIndexSettings::open4546326923980b66e1000000ac13838ecrd120en
[2652] 2009-08-04 15:02:20.474 e TrexStore    UdivListMgr.cpp(00094) : can't get index settings for 4546326923980b66e1000000ac13838ecrd120en rc=16
[2652] 2009-08-04 15:02:20.474 e TREX_C_STORE FileHandle.cpp(00908) : ERROR: filestatus == -1
[2652] 2009-08-04 15:02:20.474 e TREX_C_STORE CStoreFiler.cpp(02122) : ERROR: close fehlgeschlagen
[2652] 2009-08-04 15:02:20.536 e TrexStore    UdivListMgr.cpp(00318) : can't load uivlist for 4546326923980b66e1000000ac13838ecrd120en rc=16
[2652] 2009-08-04 15:02:20.536 e Trex_SE      bartho.cpp(00436) : ERROR: getValidUdivs '4546326923980b66e1000000ac13838ecrd120en' failed rc=16
Sounds as if the TREX index file format on HP-UX cannot be interpreted on Windows, and probably vice versa. This would mean that exporting/importing indexes with the TREX Python scripts can be used to transfer indexes between TREX systems of the same version running on the same OS platform only.
Best regards,
Rainer

Differences between AIX and Windows for SAP

Dear All,
I have a problem regarding SAP Software.We want to change our company software .First we order SAP On Windows with Oracle10g But Now We want SAP on AIX with Oracle10g.
SAP delivered us software on Windows platform.
Please Suggest me for this as what are the differences between the above two platforms and what are the differences between the above 2 platforms.
Regards,
Pankaj Kalsayan

hi Pankaj,
well, this is a very general question. perhaps you could specify a little more.
in general i would see no difference regarding the end user sitting in front of his pc using sapgui.
as far as i know all server side sap software is available for aix and windows (and many more).
for administration on the other hand there is of course lots of difference. AIX is a UNIX operating system running on special hardware with power processors. it offers quit extensive virtualisation abilities using so called LPARs and supports real big number of CPUs and large RAM. Windows is a completly differnet operating system running mostly on x86/amd64 hardware.
therefore you should also consider what know-how is available in your system administration.
not shure if that is partly answering your question ...
btw. if you are going forward with AIX you should perhaps consider switching oracle with db2. so you have a consistent IBM based landscape. also to me, sap and db2 seem to "like" each other more than sap and oracle
regards,
martin

Oracle Linux 6 and Oracle DB for ERP System

All,
I have a few questions about using Oracle Linux 6 and the Oracle Database for our ERP Server. We are using a System that run off of Appache httpd and Tomcat and connects to an Oracle Database. We currently are running as a hardware installed server, with Oracle Linux 5 and 10gR2. We are looking to migrate to a Virtual environment as we run VMWare for all our other Servers and services. I have started the install of a development/test system. I wanted to install Oracle Enterprise Linux 6 x86_64 along with either 10gR2 or 11gR2. I noticed that 10gR2 was not certified on OEL6 hence why the thought of moving to 11gR2. The one issue I have is the ERP system is not a x86_64 system is there any way of running 32 bit apps on a 64bit OEL install? I would need to compile a few small 32bit C code programs so would need 32bit libs to compile against. Any support would be greatly appreciated. I know that OEL has an i386 install but I also know that the x86_64 has more support for Oracle DB.
P.S.
Our ERP System is programmed via a small company that does not certify anything. They have taken the approach if it works it works (not happy with this but it is what it is). So the main issue is I need to get Appache Httpd, Tomcat running along with ability to compile a few small 32bit apps.
Edited by: Rever75 on May 7, 2012 1:45 PM

x86-64 is an extension of the x86 32-bit CISC instruction set. The 64-bit extension provides support for long mode to address larger virtual and physical address spaces.
You can generally run 32-bit applications on a x86_64 bit CPU and a x86_64 kernel, provided you have the appropriate i386 libraries installed. When you install Oracle 11gR2 11.2.0.1 for x86_64, appropriate i386 libraries are a prerequisite.
Since x86 on a x86_64 CPU is still hardware, there will be no performance penalty to run 32-bit application. Btw, you cannot run 64-bit applications using a i386 kernel. The only exception I know is Mac OS X.

Java Add-In Installation for EHP4 ERP system

Hello!
we successfully upgraded our SAP ERP system to EHP4 for SAP.
Our system has only ABAP stack.
Question
1) Is it possible to install a Java Add-In instance for the existing EHP4 system?
2) If yes, can this be done on the same Windows server?
Thank you very much!

Specific Requirements
Take the following specific requirements of the new installation process into consideration:
- The previous SAPInst installation service Java Add-In in SAP ERP 6.0/SAP NetWeaver
7.0 was able to add Java usage types such as EPC, or EP, to existing ABAP-only
systems. This was possible only, if you added AS Java at the same time. The option of a
Java Add-In installation is not any longer available as of the enhancement package 4 for
SAP ERP 6.0. Thus, it is not any longer possible, for example, to add EPC and EP
together with AS Java to an ABAP-only system.
[SAP Enhancement Package 4 for SAP ERP 6.0|https://websmp201.sap-ag.de/~sapidb/011000358700000772192007E]
There are many links on SDN discussing ERP EHP 4 dual stack:
[Re: EHP4 Dual stack;
[ECC 6.0 - EHP4 - Client Import;
Hope this helps.
Thanks,
Naveed

Integrating SAP-ERP system to SAP-SCM system via SAP-XI

Hi All,
My requirement is to make a scenario for Integrating SAP-ERP system to SAP-SCM system via SAP-XI,Sender side is IDOC Adapter and Receiver side is Proxy.As iam not aware of the scenario procedure can any body could explain briefly step-by-step on this.
Thanks in Advance.
ram

Hi,
Sender is IDOC so no need to take any communication channel & sender agreement in ID window.
Find below link of more information on IDOC configuration
Introduction to IDoc-XI-File scenario and complete walk through for starters.
Troubleshooting File-to-IDOC Scenario in XI.
Convert any flat file to any Idoc-Java Mapping
IDOCs (Multiple Types) Collection in BPM
Outbound Idoc's - Work around using "Party"?
Troubleshooting File-to-IDOC Scenario in XI.
Proxy Configuration
File to R/3 via ABAP Proxy

Two R3 Systems on one Windows NT Server

Dear SDN Colleagues,
I'm starting an installation project (DEMO systems) of the Solman 4.0 and SAP ERP 2005 (ECC 6.0). I'm planning to install both systems on one Windows NT Server. About ABAP stack I know that it is possible, as such as describe in the SAP Note 28392 "Two R/3 Systems on one Windows NT Server", but wed like to know about JAVA Stack.
Is there any available SAP documentation about
installing several systems in one host?
Thanks in advanced and Best Regards,
Chacon

Hi,
you can install both Solman and ECC 6.0 on single NT host.
it is better to go for 64 bit windows installation. if you have 64 bit windows OS.
installation of java stack depands on your requirement.
download installation document from service.sap.com/instguides.
Guidelines: ( for example only)
1) first install SOLMAN 4.0 ABAP + JAVA stack on windows.
SID: SSM
instance number : 00
after sucessfull installation of solman perform post installation on that. and stop the SAP instance.
2) Now install ECC 6.0 ABAP instance , If you want to plan to use ESS/MSS like java based service than JAVA stack is required.
Either you can perform ABAP + JAVA stack or perform only ABAP installation and JAVA stack as separate instance.
SID: ECC
instance number : 10
if you going for JAVA stack as separate instance.
SID: J2E
instance number : 20
so as result you have total 3 System, for this more than 4GB RAM is required. ( for better perfomance)
regards,
kaushal

Integrated Business Processes with ERP Systems Textbook

This forum will move to the New SCN as part of our migration to a new platform. Once we make that move, on December 5, it will become a read-only discussion. It will be searchable but will not be part of the site navigation. If you have questions, please contact me, [Gali Kling Schneider |http://www.sdn.sap.com/irj/scn/bc?u=6v4sgatytpg%3d].

Dear Dr. Word,
I am a graduate student of MIS at Northern Illinois University. I took Dr. Yipeng Liu’s course of Advanced Topic of Information Systems using your textbook - Integrated Business Process With ERP Systems. Your textbook is great. I have a question to discuss with you.
On page 62 of your textbook, I don’t think the accounting process of purchasing supplies is correct. In the example, “GBI purchases office supplies for $500 with a check. Office supplies are expensed; that is, they are defined as money spent rather than treated as an asset upon purchase, even if some of the supplies remain unused. In this case, the relevant accounts are bank and supplies expense.”
Actually, supplies unused are assets of companies. Otherwise we don’t need an account called supplies at all. In the given example, I think we should credit $500 to bank account and debit $500 to supplies account. If at the end of the fiscal year, we used only $300 supplies, then we credit $300 to supplies account and debit $300 to supplies expense account. This is the typical process of supplies accounting.
“Office supplies are expensed; that is, they are defined as money spent rather than treated as an asset upon purchase, even if some of the supplies remain unused. “ This practice actually goes against the Matching Principle of General Acceptable Accounting Principles (GAAP). It’s not a good example especially in textbook, even though lots of companies are doing real business like this.
I am looking forward to hearing your thoughts of my comments on supplies accounting of your textbook.
Best regards,
Tingkai (Tank)

How to configure sap maxdb client to connect to SAP ERP system (SAP HR)

Hello all,
I am currently installing live cache for SAP ERP HR application(Idoc), can anybody tell me the sequence to proceed to configure SAP livecache with SAP ERP system. i am doing following steps
1. Install SAP DB using installation MAXDB CDs
2. Install SAP Livecache and standalone server SCM 5.0 using SAP ERP master and Livecache dvds.
3. install Livecache client fromSAP ERP master and livecache dvds between SAP ERP and livecache server.
4. configure in LC10, tcode.
but when i press on livecache monitoring in LC10 it gives me following error.
Command: DBMRFC
Parameter: -gsapfive -xsapgw00
SY-SUBRC: 8
Return Code
sap maxdb client

i tried the said things and after that i am getting following error in DB59, first three steps are successful but 4 one is failing.
Test Scope
1. Execute an external operating system command (DBMCLI)
2. Determine status using TCP/IP connection SAPDB_DBM (DBMRFC command mode)
3. Determine status using TCP/IP connection SAPDB_DBM_DAEMON (DBMRFC session mode)
4. Test the SQL connection (Native SQL at CON_NAME)
Application Server: <hostname>_<SID>_00                           ( Windows NT )
1. Connect. test with "dbmcli db_state"                         Successful
2. Connect. test with command mode "dbmrfc db_state"            Successful
3. Connect. test with session mode "dbmrfc db_state"            Successful
4. Connect. test with "native SQL" ( LCA )                     No connection
   SQL Code: 4008
    POS(1) Unknown user name/password combination
   For detailed information, see the developer trace for work process:            1
please see trace from file dev_rfc and dev_w0 below
log for dev_rfc
**** Trace file opened at 20110107 174356 Eastern Standard Time, SAP-REL 701,0,14 RFC-VER U 3 1016574 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: SAPLARFC (Transaction: )
User: MKUMAR (Client: 800)
Destination: IDOCTEST (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 45030386, {9BAF1AE0-E29B-F1A3-9406-0019B9E204CC})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
SERVER> Called function module: ARFC_RUN_NOWAIT
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =IDOCTEST
HOST =%%RFCSERVER%%
PROG =IDOCTEST
Log from dev_w0
A RFC 1485 CONVID 47150684i tried the said things and after that i am getting following error in DB59, first three steps are successfuk but 4 one is failing
trace from file dev_rfc is below
**** Trace file opened at 20110107 174356 Eastern Standard Time, SAP-REL 701,0,14 RFC-VER U 3 1016574 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: SAPLARFC (Transaction: )
User: ABC (Client: 800)
Destination: IDOCTEST (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 45030386, {9BAF1AE0-E29B-F1A3-9406-0019B9E204CC})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
SERVER> Called function module: ARFC_RUN_NOWAIT
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =IDOCTEST
HOST =%%RFCSERVER%%
PROG =IDOCTEST
A RFC 1485 CONVID 47150684
A   * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
A RFC> ABAP Programm: SAPLARFC (Transaction: )
A RFC> User: abc (Client: 800)
A RFC> Destination: IDOCTEST (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 47149684, {FDB31AE0-D203-F1C0-9406-0019B9E204CC})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
A RFC SERVER> Called function module: ARFC_RUN_NOWAIT
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
M
M *****************************************************************************
M *
M * LOCATION    SAP-Gateway on host <HOSTNAME> / sapgw00
M * ERROR       program IDOCTEST not registered
M *
M * TIME        Fri Jan 07 18:15:25 2011
M * RELEASE     701
M * COMPONENT   SAP-Gateway
M * VERSION     2
M * RC          679
M * MODULE      gwr3cpic.c
M * LINE        1778
M * DETAIL      TP IDOCTEST not registered
M * COUNTER     715
M *
M *****************************************************************************
M
A RFC 1485 CONVID 47152747
A   * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
A RFC> ABAP Programm: SAPLARFC (Transaction: )
A RFC> User: ABC (Client: 800)
A RFC> Destination: IDOCTEST (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 47151731, {FDB31AE0-D203-F1C1-9406-0019B9E204CC})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
A RFC SERVER> Called function module: ARFC_RUN_NOWAIT
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
Mani

ERP 6.0 on Windows 2008 Release 1 - Oracle 10g

Hi
We are evaluating upgrading our R/3 4.7 (Windows 2003) to ERP 6.0 with Oracle on Windows 2008 R1. Meanwhile, Microsoft released Windows 2008 R2 on Oct.22 and SAP yet to certify the same.
SAP are planning to release new SAP Kernel/Software at the end of first quarter of 2010 for Windows 2008 R2, as Windows 2008 R1 and Windows 2008 R2 use different Windows kernel versions (SAP Note 1383873).
We have to complete our upgrade by April, 2010, so we have no option but to go ahead with Windows 2008 R1 or continue on Windows 2003 until Windows 2008 R2 software is released by SAP.
Does anyone using ERP 6.0 with Windows 2008 R1? Would appreciate any feedback/experiences on ERP 6.0 (Oracle 10g) with Windows 2008 R1.
Regards
Chandu

> We just want to identify any major issues/bugs for Windows 2008 R1 for ERP 6.0, as Microsoft released new Windows kernel for 2008 R2 and SAP is also treating it as another operating system as per OSS note mentioned in my original post. If so, we like to continue with Windows 2003 and wait for 2008 R2. Mictosoft retained same kernel for Windows 2003 R1 & R2, hence SAP kernel certified for both.
So even if the certification would be done by april, would you really dare to put a production system on such a new OS? Even if certified by SAP, database and your hardware vendor? I'd consider that risk MUCH higher than using an OS that is released for more than a year.
> We are already on 10.2.0.4.
Yes - what I meant was, that if you install an Oracle database you need to use a different DVD set (with patch for 10.2.0.4 included) as opposed to the old 10.2.0.1 DVD.
> Just wondering whether you have any bad experiences with Windows 2008 R1 and SAP suggested Windows 2008 R2 as a fix etc.
If there would be any big issues running on R1 they would have been published . So far I haven't seen any major bugs or problems; for us Windows 2008 R1 proved rock solid, both virtualized and on bare metal.
Markus

I had migrated Oracle 10g database from Windows to Oracle 11g Linux

I had migrated Oracle 10g database from Windows to Oracle 11g Linux. The database is performing very slow.
Please guide me where I have to begin (starting point) looking into it.
Some document stated gather system statistics. How to check system statistics is up to date
What are the crucial initialization parameter ?

Hi,
Let me just point you out to the documentation, which may concern you:
I had migrated Oracle 10g database from Windows to Oracle 11g Linux. The database is performing very slow.
Managing Optimizer Statistics
How to check system statistics is up to date
Managing Optimizer Statistics
What are the crucial initialization parameter ?
Configuring a Database for Performance
Thanks &
Best Regards,

Migration erp system aix to windows

Similar Messages

Maybe you are looking for