Migration error The operation can only be performed if the following objects are writable

Hi Experts ,
The operation can only be performed if the following objects are writable:The project is not in the repository, but there are some read-only files
Component com.*******k.custsmry.comp.VcCustSumryRptComp
Read-only: D:\software\nwds -7.31SP12\eclipse\workspace.jdi\LocalDevelopment\DCs\******\portal_dev\custsmry\_comp\src\packages\com\*******\custsmry\comp\VcCustSumryRptComp.wdcomponent
Regards
Govardan

Hi jun wu,
Making it writable in windows works ,
Actually my dc migrations is from nwds 7.01 to 7.3 ,
in 7.01 it is NWDI , the dc is under a track so im migration the dc individually to 7.3 , i.e one by one instead of migrating the entire Track.
After migration required dcs from 7.01 to 7.3 we are planning to move that to new track in 7.3 .
will it have any impact when that dc is moved to new track ? is it right approach to make it wirtable throught windows.
Regards
Govardan

Similar Messages

ERROR: The operation could not be performed because the file can't be accessed or doesn't exist. Please contact your web developer to correct the problem.

Only on one page, the client is receiving this error:
Error - The operation could not be performed because the
file cant be accessed or doesnt exist. Please contact your web
developer to correct the problem.
I tested it with a couple different usernames and a couple different browsers and it works fine on my end.. but none the less it is happening to him. This is the second time it happened to two different clients.
??? Any ideas ??? Anyone else had this happen?

Here's the setup on the two machines in particular...
Machine #1:
XP Pro
Was IE7, now latest FF
No antivirus
Firewall – Windows Firewall, Downloaded AVG free trial ver., but not installed
Machine #2:
XP Pro
IE7
Again, No AV… had Kaspersky… but uninstalled it
Windows Firewall
Maybe that could be of some assistance... not seeing anything that could possibly block or inhibit the ICE. Each machine is independent of the other, separate networks, different locations, JavaScript enabled, no cookie blockers, etc.
....STUMPED!!!

Firefox is unable to update to 7.0.1. I get an error that The operation can't be completed because the item "libsmime3.dylib" is in use. I found this is a Cisco folder, tried to trash it, but it won't leave. Maybe I need it?

The operation can’t be completed because the item “libsmime3.dylib” is in use.
This is the error message I get when i try to install the 7.0.1 update. I found a cisco folder on my MAC and tried to Trash it. It won't leave. Maybe I need it... Some of it did Trash, but what ever is left continues to prevent 7.0.1 from installing.

OK I looked at an old Apple forum and someone suggested Trash then Restart then Empty Trash, and it worked. Cisco is gone, Opt is gone, and I was able to load FireFox. I had to give admin passwords to do this too. Why an old weird game or library folder could cause such obstacles is a wonder. But I'd rather wonder about other things...

Trying to upgrade to FireFox 4 and getting this error: The operation can't be completed because the item "libsoftokn3.dylib" is in use.

I am using a new MacBook Pro. I click on the "Download FireFox 4.0" button. The file(s) download and the dialog appears to drag FireFox icon into the Applications folder.
I get a dialog that says "There is a previous version.. Ok to replace?" I click "Replace".
Then I get a Copy dialog that says: "The operation can’t be completed because the item “libsoftokn3.dylib” is in use."
The software is not updated and I am still on FireFox 3. I tried rebooting and doing it again - I get the same results. I also did a web search and was not able to find a solution to this error.

I had success by:
1- Quit Firefox
2- Go to the Applications folder and drag Firefox to the desktop
3- Install Firefox 5 (it installs successfully at this point)
4- Put old Firefox in the trash
5- Secure empty trash
It may be possible to just drag Firefox directly to the trash and use regular Empty Trash, but I did not try that. Some people on the net reported that they could not empty the trash after putting the old Firefox in the trash (got the same "libsoftokn3.dylib is in use" error), so I just tried Secure Empty Trash, which may be no different from a regular empty trash as far as this goes; not sure as I'm a bit new to the Mac.

Problems accessing time capsule data "The operation can't be completed because the original [...]"

So as my title would suggest, I'm having time capsule issues.
First of all, I'm running a MBPret late 2013. Currently I'm trying to setup my time capsule in my university dorm room for two reasons:
1) I want to use the internet they provide us.
2) I want to use time capsule as a backup drive.
I am not permitted to use wifi as per my contract with the university, unfortunate, but fine, I can use ethernet, I have the ethernet -> thunderbolt adapter.
Now, thus far, I've setup my time capsule normally (this is second setup not the first) and I performed a hard reset before connecting it all here. Before here it was setup at my previous house. After that I disabled the wireless and enabled secure shared disks "with device password".
I don't have internet access yet, though I believe this is a problem on the administrator side not mine, but the real problem is that I cannot access the data folder on my time capsule in finder. I've tried erasing the volume, hard resetting and setting up again, I keep getting the same error message:
"The operation can’t be completed because the original item for "Data" can't be found"
Any suggestions?
Regards

If you don't have applecare you will need to pay if you want the genuine article but your problem is familiar and Apple support is likely to say your the first person they have ever heard of with this problem.. even when every second post here refers to it.
Here is my standard list. Work through it and tell me if you succeed.
The cause is Yosemite btw.
A factory reset of the TC is the start.. it is required so you can find it again.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the laptop itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.
Someone posted a solution.. See this thread.
Macbook can't find Time Capsule anymore
Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.
This user has had success and a few others as well.
RáNdÓm GéÉzÁ
Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

Cannot delete file: The operation can't be completed because the item "DataReferences" is in use.

I have a My Book TB Drive where all of my Time Machine backups go to. I decided to delete some older version of backups. They ended up in my trash can. When I deleted the items in my trash can, all of them erased with the exception of one file. This file refuses to go! I have tried "Empty Trash", "Secure Empty Trash" and holding the Option Key + "Secure Empty Trash". Each time the I get the following error: The operation can’t be completed because the item “DataReferences” is in use.
If I unplug the My Book TB Drvie, the file dissapears from the trash can. If I plug it back in, it reappears.
I am not sure what to do anymore. Any suggestions?
Thanks!
MacMini
Mountain Lion (Error originated in OS X)
My Book TB (External Hard Drive)

I found an article on how to allow third party apps. Posted it below just in case if anyone is interested.
http://www.computeraudiophile.com/f11-software/your-security-preferences-allow-i nstallation-only-apps-mac-app-store-and-identified-developers-12789/
Anyhow, I was able to do the double click on the trash it.I tried the "fast" version and the "really stuck" version and unfortunately, none of the options worked.
Any other suggestions?

The operation can't be completed because the original item ".." can't be found. Need a fix!

Ok. This is my first and hopefully only discussion ever! Thanks in advance for all the help.
I had set up my network and this was all working fine for months. Time Machine did proper back ups and I could store files on the drive as well over the network. Not sure how, or exactly when this error began. It may have had something to do with the upgrade to Mavericks.
But I can see the drive when I open Finder (which I have named Airport) can then access the directories but will not load any of the files. If the Finder window is closed and I try to access the external drive again via the network, I am prompted with.."The operation can't be completed because the original item ".(Airport)." can't be found. Also of note...there is no "eject" option beside the name of the drive.
I have found only one solution that was dated in 2008 where someone was deleting volumes from their machine and the instructions were not quite clear, so I'm hoping for some new insight on this issue. Honestly, I just didn't understand how to do what he said...several have asked him to elaborate but no further explanations and all other links are now dead. It seems this is a common issue. I'm aware many people will read this and want to say..."i Have this problem too, when im doing something with windows and other computers..." There are many solutions for these situations that I have found....but no recent ones for those with ONLY one drive and an airport extreme running only Apple computers. So guys, lets try to keep this thread for one topic only. Hopefully a quick and helpful thread with a few replies and some step by step directions to solve everyones toubles.
I even had my router replaced and still the same issue. Also, the hard drive works perfectly when hardwired to my computer. So the issue must lay within the settings of my MacBook Pro, OS X 10.9.1. If you feel I should provide any other information I would be happy to do so!

Lexvo,
Thanks for the input. I had to look up what SMB stood for, server message block? So I'm assuming this is not something I'm using.
Also, this is not a "sometimes" problem. This is a consistent and reproducible issue.
As far as an update...I dont see an OS update fixing my issue unless something is overwritten, but maybe not.
I think a good point to consider and open to discussion is why does logging in as a root user solve the issue? What can be done or manipulated to allow functionality with my regular login info versus a root user?

The operation can't be completed because the original item for " your drive name here " can't be found

Hey all,
I hope someone can help. I am running 10.7.5 OSX currently on my Mac Book Pro. I recently got a new Windows 8 desktop. A ceap one running Windows 8. I currently have 5 drives shared over my home network. 3 are working just fine (the 3 I just put on the network today). The other 2, however, were previously on my old Windows Vista computer also shared over my network. My Mac Book Pro had access just fine (I set up sharing on my vista comp) and everything ran smooth. Today when I hooked up my new Windows 8 computer and put the 5 drives on and shared them via my network, same way as I done before, 3 are working fine but the two original drives give me an error when I try and access them from my Mac over my home network. They both show up with the correct names but when I try and access them it tells me:
The operation can’t be completed because the original item for “M&V” can’t be found.
M&V is the name of one of the drives. Here is the trouble shooting I have done:
- Renamed the drives multiple times
- Tripple checked my permissions
- Checked for updates and installed both on my PC and Mac
- Restarted my PC and Mac
- Tried Both of my dual frequencies on my netowork
- Tried hooking up with ethernet cable
- Changed the user name and password for my shared access on my PC multiple times and put in the correct info on my Mac
- Tried taking away all passwords (unsecured)
- My other Windows PS's can access all drives just fine
But still I get the above error. I have isolated it to an issue with my Mac. I was thinking maybe if there is a way to have my Mac forget the shared drives and I can re-add them and put in my password, I am not sure if that is even possible. I am at al loss on what to do. Any help you can give would be greatly appreciated.

I am having the same exact issue and I've been busting my testi-balls to figure it out. I've got 15 years experience in the computer game and still can't figure it out. I see a lot of people having similiar issues, but no one seems to have an answer for MY issue, which is virtually the same as the OP.
Brand new Macbook Retina.
Windows 7 x64 Machine.
ALL drives shared with ALL permissions of ALL accounts manually inserted on the Windows 7 side.
ALL other PC's in the house can access the drives on the Windows 7 machine without issue.
Only the Macbook Retina has the problem connecting. Every Windows drive I shared is visible under "network" in finder, but when I click on any of them it gives the quoted error message the OP stated.
PLEASE, if anyone finds a fix for this, let us know!

Can't move files - The operation can't be completed because the item is in use.

Hi everyone,
I'm trying to move some files off an external hard drive to my macbook pro. These are mostly video files.
However, there's a handful of files which are causing the following error:
"The operation can’t be completed because the item “XXX” is in use."
I've no idea what's wrong but would appriaicte some help. All the previous threads I can find with the same error are related to moving items to the trash and I actually followed some of the advice (shutting down etc) but it still didn't help.
Thanks anyone and everyone for the assistance.
James

I was investigating this same problem on our iMac running OS 10.10. When I checked Activity Monitor for the DiskUnmountWatcher process, I noticed that with two users logged in simultaneously, there were two instances of most of the system processes, including that one. If I logged out of the other user account, and consequently only had one instance of the DiskUnmountWatcher process running, I was able to copy multiple files onto the network drive with no problem.
If I were to speculate, I'd probably guess that DiskUnmountWatcher is adding some metadata to new files when it detects them being added to a mounted drive. If there are two instances of the process running, they both try to modify the file's metadata simultaneously and generate errors.
TL;DR: If you encounter this problem, try logging out all users other than the one trying to move files.

The operation can't be completed because the original item for "EXTERNAL" can't be found.

After upgrading to Mountain Lion I can no longer access my exFat formatted USB drive that is connected to my iMac from my MBP. I can connect to the iMac, but when I try to mount the USB drive I get an error message saying "The operation can't be completed because the original item for "EXTERNAL" can't be found."
I have enabled only 'SMB' in sharing preference on all of my machines, and all are running Mountain Lion.
*I have since tried connecting directly with the IP address, same result, and also reformatting the USB drive to just FAT32, same issue. I need the drive formatted in a windows format so my home theatre system can connect to it.
Message was edited by: davea3323

Update, So I disassembled the external hard drive case and pulled the bare drive out and connected the drive directly to my motherboard and without change any settings on the PC, the MacBook can now access it over the network. What is it about externals that the Mac can't access them over networks?

The operation can't be completed because the original item for "media" can't be found

Yosemite recognizes my BlackBerry Z30 on my Network. I see my Media Folder and my Removable_Sdcard.
Whenever I try to access them I get this message:
The operation can’t be completed because the original item for “media” can’t be found.
Any Ideas?
Thanks

I am having the same exact issue and I've been busting my testi-balls to figure it out. I've got 15 years experience in the computer game and still can't figure it out. I see a lot of people having similiar issues, but no one seems to have an answer for MY issue, which is virtually the same as the OP.
Brand new Macbook Retina.
Windows 7 x64 Machine.
ALL drives shared with ALL permissions of ALL accounts manually inserted on the Windows 7 side.
ALL other PC's in the house can access the drives on the Windows 7 machine without issue.
Only the Macbook Retina has the problem connecting. Every Windows drive I shared is visible under "network" in finder, but when I click on any of them it gives the quoted error message the OP stated.
PLEASE, if anyone finds a fix for this, let us know!

"The operation can't be completed because the disk is full" when trying to compress files

Trying to compress my files because my computer keeps saying that my startup disk is almost full. However, when I try to compress my files, I get an error that reads "The operation can't be completed because the disk is full." Does anyone know why this is happening? Any help would be much appreciated! Thanks

Yes. You are trying to create more files taking up more space on the computer. Compressing files only reduces disk space used after you remove the uncompressed file.
Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion's Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

Cannot empty trash: "The operation can't be completed because the item ...

I've been having trouble emptying the trash. I get the following error, "The operation can’t be completed because the item "_file name_" is in use."
I've tried unlocking the files, but the unlock doesn't seem to stick.
I'm not sure if this is related, but a couple of months ago, I had a repair done and since then some of my software have required me to enter my license information again; apparently it looked as if I was running the programs on a different machine.
Anyone have tips/solns?

Thank you!
I ended up sticking the startup disc in, restarting while holding down the "c" key, and "using the Reset Home Directory Permissions and ACLs function of the Reset Paswoord function of the Utilities menu."
It worked perfectly; I now have an empty trash can.

The operation can't be completed because the original item cannot be found.

Hi all.
I've been having this problem for a while. I have a file server on a windows xp system with multiple drives attached to that pc (internal and external).
When I try mounting one of them from the finder I get the message :
+*The operation can’t be completed because the original item for “Movies” can’t be found.*+
Other drives on the pc mount just fine and actually the problematic one used to mount fine and then suddenly it seems that the mac lost the path to the disk and can no longer find it.
I tried reformating the drive, changing the drive letter, and naming. It worked for a while then the drive got lost again
Its a WD drive formatted to ntfs (Identical configs and brand to all the other working drives) Its not a drive defect either. Its happened more than once.
I'm quite knowledgable when it comes to computers but this has been a dead end for me and I'm sure for others as well.
Please Help

I was about to post exactly this question. I have suddenly lost access to the folder on my shared network drive although the drive itself is still visible. I get the above error message when trying to open folders within. I have tried connecting through various routes such as Go - Connect to server ... but its the same.
A discussion thread elsewhere talked about deleting multiple share point entries ... over my head though.
Hope someone out there knows the answer - and how to explain it in plain english

The operation can't be completed because the item "iTunes Library Extras.itdb" is in use.

I am trying to transfer my iTunes from my PC to my new Mac. After reading through this forum a bit, I followed the instructions at: http://www.macworld.com/article/146958/2010/03/move_itunes_windows_mac.html
I backed up my PC's iTunes folder to an external drive after selecting to consolidate files, etc.
I connected the external drive to my Mac and did a copy and paste of the iTunes folder. I have not put any music into the iTunes on the Mac, so I just said Yes to overrite (it said there are 2 files that will be overwritten- I think they are apps I downloaded this weekenad i am fine to overwrite them). It starts to copy and then I get the error message: "The operation can’t be completed because the item “iTunes Library Extras.itdb” is in use." I verified that I do not have iTunes open on the Mac and made sure that when I backed up from PC, I did not have iTunes open there either.
Any ideas?
Thanks
Katie

I figured it out!
There was an iTunes folder on my new Mac. I may have installed it. I just deleted the whole iTunes folder under Music. I then tried copying and pasting from my External Drive again and now it is copying the data as I would expect.

Migration error The operation can only be performed if the following objects are writable

Similar Messages

Maybe you are looking for