Migration Exchange 2013 to Exchange 2013

Hello,
I have 1 Exchange server 2013 (Mbx+Cas) and for some resons I need to install one more Exchange server 2013 (Mbx+Cas) and I changed all of the virtualdirectory's link, I changed Autodiscover internal URL. When I check Client Outlook Test E-mail
Auto configuration I see autodiscover links shows old server's name. Thats why I can't turn off the old server. in Outlook Test E-mail Auto Configuration how can I change Autodiscover to https:\\...... link? thanks in advance

Hi
Have you moved the mailboxes to the new server? You can install a new server and gradually move the mailboxes. you will need to setup your urls, autodiscover record in DNS etc.

Similar Messages

After Migration Exchange 2013 does not send mail outside the organization

Dear,
After Migration Exchange 2010 to exchange 2013. We does not send email from the organization but we can received mail from others organization.
Delivery has failed to these recipients or groups:
[email protected] ([email protected]) The server has tried to deliver this message,
without success, and has stopped trying. Please try sending this message again. If the problem continues, contact your helpdesk.
Diagnostic information for administrators:
Generating server: OGMAIL.domain.net Receiving server: gmail.com (2607:f8b0:400c:c01::1a)
[email protected] 6/11/2014 10:16:10 AM - Remote Server at gmail.com (2607:f8b0:400c:c01::1a) returned '550 4.4.7 QUEUE.Expired; message expired' 6/11/2014
10:03:49 AM - Remote Server at gmail.com (2607:f8b0:400c:c01::1a) returned '441 4.4.1 Error encountered while communicating with primary target IP address: "Failed to connect. Winsock error code: 10051, Win32 error code: 10051." Attempted failover
to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts. The last endpoint attempted was 2607:f8b0:400c:c01::1a:25'
Original message headers:
Received: from OGMAIL.domain.net (192.168.10.12) by ogmail.domain.net
(192.168.10.12) with Microsoft SMTP Server (TLS) id 15.0.847.32; Mon, 9 Jun
2014 16:13:30 +0600
Received: from OGMAIL.domain.net ([::1]) by ogmail.domain.net ([::1]) with
mapi id 15.00.0847.030; Mon, 9 Jun 2014 16:13:30 +0600
From: Administrator <[email protected]>
To: Administrator <[email protected]>
CC: IT.HW-Masudur Rahman-MRT <[email protected]>, "[email protected]"
<[email protected]>
Subject: RE: Migration batch mrtmove has completed successfully.
Thread-Topic: Migration batch mrtmove has completed successfully.
Thread-Index: AQHPd1JEcid9YEi4F0ue6m1039EwR5top+xp
Date: Mon, 9 Jun 2014 10:13:29 +0000
Message-ID: <[email protected]>
References: <[email protected]>
In-Reply-To: <[email protected]>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
x-originating-ip: [192.168.10.2]
Content-Type: multipart/alternative;
boundary="_000_6b0d846f503942d99d44be9aff8d6adfogmaildomainnet_"
MIME-Version: 1.0
Queue viewer:
Identity: ogmail\8786\3470333575194
Subject: testing
Internet Message ID: <[email protected]>
From Address: [email protected]
Status: Active
Size (KB): 4
Message Source Name: SMTP:Default OGMAIL
Source IP: 192.168.10.12
SCL: -1
Date Received: 6/23/2014 3:22:49 PM
Expiration Time: 6/25/2014 3:22:49 PM
Last Error:
Queue ID: ogmail\8786
Recipients: [email protected];2;2;[{LRT=};{LED=};{FQDN=};{IP=}];0;CN=SendMail,CN=Connections,CN=Exchange Routing Group (DWBGZMFD01QNBJR),CN=Routing Groups,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First Organization,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=domain,DC=net;0
Md. Ramin Hossain

What I notice is Queue expired. The message is not going out.
Failed to connect. Winsock error code: 10051, Win32 error code: 10051." Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts.
This error states that It tried to connect to the target system but failed to connect out.
Is Exchange 2013 server added in the firewall rule to send communication over port 25?
Do you have use Front end proxy checkbox checked on the Send connector to internet that was created on 2013 (if created)?
If use front end proxy checkbox is checked, then you need to add permissions for your CAS server's IP in the Firewall for outbound port 25 rule. As it appears that the mail is originating from CAS to the firewall. If that checkbox is not checked, we need
to add the Mailbox server's IP on the outbound rule for port 25.

Migration; Exchange 2003 SP2 to Exchange 2013 on new Domain and DC

I wasn't prepared for this task, and it was thrown at me to do... Eyes are bleeding from planning reading and planning, would LOVE any input from you guys. First time posting, here and have heard great things about these forums. The Company
I work for obtained a new client and a network that is in a cluster at the moment, so I'm having to dig through everything and restructure..
Scenario:
Old Domain/Server: (To be decommissioned)
Server 2003 Standard SP2 (Domain: cosco.com; NETBIOS name: coscoex)
Exchange 2003 SP2 (6.5.7638.1)
Server is a domain controller and exchange server.
Migrating to:
Server 2012 R2 Datacenter (New Domain ad.cosco.com; NETBIOS name: cosco)
VM #1: Server 2012 R2 Domain Controller at 2012 R2 Functionality
VM #2: Server 2012 R2 with Exchange 2013 Standard (Not Yet Installed) Joined to ad.cosco.com domain
VM #3: Server 2012 R2 with Exchange 2010 (Not Yet Installed) joined to ad.cosco.com domain
These are probably not ideal conditions, but I have to work with what I'm given.
Host server (2012 R2) is in work group mode. Hyper V Installed with a VM of Server 2012 R2 and as a DC at a functionality level of Server 2012 R2. I had intended starting at a lower functionality level and raising
it later, but.... ya I forgot to change it. If needed I can spool up a new DC with a lower functional level.
DNS, AD and group policy is all jacked up on the 2003 DC so that doesn't matter, All user accounts are going to be created under the new domain. The concern is migrating the mailboxes from Exchange 2003 on the old domain to
Exchange 2013 on the new domain. The client is going to provide CSV of the AD accounts that are still valid (a lot of accounts are no longer used or are from people that no longer with the organization.)
I had some ideas, but I'm not sure if they will work. This is something I have never done before (Senior Engineer Quit).
My thoughts:
- Establish a two way trust relationship between the two domains.
- Create two VM's, one with Exchange 2010 and one with Exchange 2013 (They have a 2010 licence that was not used).
- Create the users on the new domain
- Use the double hop method from Exchange 2003 > Exchange 2010 > Exchange 2013
- Link Exchange accounts to the correct user accounts on the new DC.
Can this be done cleanly? Am I going about this the correct way? Any feedback would be GREATLY appreciated.
Note: We are forced to use ad.cosco.com (Obviously not the actual domain name)

Hi,
Base on my experience, your idea is feasible.
However, before getting started, you should note that Exchange 2010 (with any service pack or update rollups) is not (yet) supported to install on Windows 2012 R2. More details refer to the following link:
http://technet.microsoft.com/library/ff728623(v=exchg.150).aspx
After all the preparations complete, you can refer to the following articles to migration exchange 2003 to 2010, then to 2013:
Exchange 2003 to 2010 Cross-Forest Migration Step by Step Guide
Exchange 2010/2007 to 2013 Migration and Co-existence Guide
Best regards,
Niko Cheng
TechNet Community Support

Migrate exchange 2007 mailboxes to exchange 2013

Hi Guys,
im trying to move exchange 2007 mailboxes to 2013. to cut to the chase, is this possible because im getting different kinds of errors?
Please advise if this is possible and how to do it.
Thanks!

Hi,
Below link also will help you
Microsoft Exchange Server Deployment Assistant
http://technet.microsoft.com/en-us/office/dn756393.aspx
Before migrating exchange server, Make a plan
try to practcice on lab. " Production environment and practice lab is entire different"
I dont know your environment. Hope your Domain controller and Exchange environment is residing in same place. If it is different site, move FSMO roles to that site for installing purpose.
IT is really challenge and excitement .
Try to find the solution of client outlook connectivity,
I had this problem, after I install Cumulative update, this problem gone.
Login ECP console after install exchange server,
Certificate installation,
DNS pointing, port forward,
Apply auto discover.
I faced another issue as well during the installation. My ex admin upgraded exchange server 2003 to 2007. He may not uninstall exchange server 2003 properly. Exchange server
2003 record was in active directory. Exchange 2013 doesnt suport mixed version of exchange 2003 and 2013. I have to delete the Exchange server 2003 record under DNS and Adsiedit. After that only exchange server 2013 allow to continue to install.
Best of Luck " Nothing is impossible"
Regards,
Joby

Questions about migrating Exchange 2010 to 2013

We currently have two Exchange 2010 servers with roles separated. One local mailbox server without CAS in our building and a CAS with no mailboxes in a remote datacenter.
We plan to migrate to 2013 with two new servers hosting all roles on each and then shut down the 2010 servers. There will be one local and one in a datacenter for Exchange 2013 so that either server could be individually restarted without internal LAN users
losing email access. (We do not want to open network access from the Internet to the onsite CAS). Is it practical to set it up this way?
How do we get the existing certificates (mail, autodiscover, and the local host name etc.) moved from the 2010 to the 2013 to the new servers when I assume they both must be running side by side for at least a short time while mailboxes are moved form 2010
to 2013? Will we need to buy new SSL certificates since the local host machine names for the Exchange server 2013 servers will be new and there will be more than one CAS?

Most of the CAs allow issuing duplicate certificate (as if you are requesting for a new cert) for the servers running same application. If your CA doesn't provide duplicates you can export the certificate and import to Exchange2013. http://msexchangeguru.com/2013/06/29/import-cert-e2013/
In certificate you dont need your internal FQDN. Especially in future you wont be able to add your internal FQDN in your certificate as most of the CAs wont allow you to add internal FQDN.
When you migrate to exchange 2013 you just need to configure the external URLs of Ex2010 in Ex2013 for both (i.e. same URLs for internal and external URLs) and point your common name and autodiscover to Exc2013 as Ex2013 will proxy the requests to your legacy
Ex2010 server. i.e. Your client interface will be Ex2013.
Please check this it will help you configure Split DNS and configure your URLs
http://exchange.sembee.info/2013/install/clientaccesshostnames.asp
http://www.mustbegeek.com/configure-external-and-internal-url-in-exchange-2013/ GUI
Configure split DNS to resolve external name from internal network.
Keep both Ex2010 CAS and Ex2013 CAS servers till all get logged in atleast once to connect to Ex2013 mailbox automatically.
As your DAG stretched across the data centers make sure
your DAG is in DAC mode.
http://technet.microsoft.com/en-us/library/dd979790(v=exchg.150).aspx
Please read this as well for details about DAG configured in multiple site
http://technet.microsoft.com/en-us/library/dd638129(v=exchg.150).aspx
Ensure you use Exchange2013 SP1 as it is already released and available for download
http://www.microsoft.com/en-us/download/details.aspx?id=41994
Do you have a load balancer in place?
Regarding internet facing it depends. You can configure CAS2013 server in DMZ if you wish to.
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Migrate Exchange 2003-2013 and AD 2000-2012

We are in the process of migrating from Exchange 2003 to Exchange 2013. We currently have 4 Domain Controllers in Windows Server 2000. Two of them host also Exchange Server 2003 in an A-P mode configuration.
The double hop migration to 2010 was not possible as it requiered a minimal functional level of Windows Server 2003. This lead us to consider the double hop migration to 2007 first, even though it is not the recomended path. We have more
than 400 mailboxes with a size than often passes 1TB.
Is this scenario possible and may be the risks? Do you think using a third party tool to pass data to Exchange 2013 would be a safer solution?
Looking forward to your ideas.
Thank you,
Megi

Hi,
As far as I know, same with the Exchange server migration, we cannot also directly migrate AD 2000 to AD 2012. Thus, I recommend you directly upgrade to AD 2008 and then migrate Exchange 2003 to 2007 to 2013.
Here are more references you can refer to :
Exchange 2000/2003 to Exchange 2007 migration guidelines:
http://blogs.technet.com/b/mbaher/archive/2008/06/04/migrating-exchange-2000-2003-to-exchange-2007-guidelines.aspx
Step-by-Step Exchange 2007 to 2013 Migration:
http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-1-step-by-step-exchange-2007-to-2013-migration.aspx
Thanks,
Angela Shi
TechNet Community Support

Migrate Exchange 2010 to Exchange 2013, Need to defined win 7 users logon to Exchange 2010 & Win 8.1 users logon to Exchange 2013

Hi,
My organization have few win 7 and windows 8.1 clients. Now I want to migrate exchange server 2010 to 2013. And I don't want to remove exchange 2010 from the organization. Because I want to connect win 7 client through exchange 2010 and windows 8.1 user
connect to exchange 2013. Is there any way to define the win 7 users to connect to exchange 2010 and Windows 8.1 users to connect to exchange 2013?
Md. Ramin Hossain

The client connections are proxied to the mailbox servers that hold the mailbox.
You would need to have 2010 MBX servers with the mailboxes for the XP users, and 2013 MBX servers holding the mailboxes for the 7 users. And of course, the appropriate CAS servers.
Realistically, you need to migrate away from Windows XP. It is no longer supported.

Migrate Exchange 2003 Public folders and OAB to Office365?

Hi guys,
I am trying to migrate exchange 2003 public folders to office 365. I have read various documentation however they were either out of date or half-solutions.
The company stored OAB's in each public folder as well, how do I go about migrating these lists into office 365? Will it just "work" if I migrate the public folders across?
Thanks,
Alex

Hi,
If you are migrating from inhouse 2003 to office 365, then the best options for you are-
1. Either you can go for the manaul process. You can create PST files and can upload them to mailboxes through office 365 account.
Kindly refer the below mentioned link for the same
http://blogs.technet.com/b/canitpro/archive/2013/05/31/step-by-step-migration-of-exchange-2003-server-to-office-365.aspx
2. Or you can go for any 3rd party tool using the same you can migrate your public folders to office 365. This is required when you need to avoid the risks associated and need to keep your environment up and running even while migration process. Respond
back for third party tool suggestions.

Cross forest migration Exchange 2010 SP2 to Exchange 2010 SP2

Hi,
We are planning cross forest migration Exchange 2010 SP2 to Exchange 2010 SP2.
Requesting you to please help us out for below scenario.
Source Exchange 2010 SP2:- abc.com
2AD, 2CAS & 2 MBX servers
Database:- 4
Total Users :- 3500
Accepted Domains :- 8
Total Data:- 5TB +
Target Exchange 2010 SP2:- xyz.com
Resource allocated same as above.
Now we have to migrate users along with data to target forest xyz.com keeping both setup live, as moving 5TB + data will be a ongoing process and the same will take some time.
With the guidelines mentioned in
http://careexchange.in/cross-forest-migration-guide-exchange-2010-to-exchange-2010/#comment-14203 we are able to migrate test users along with data, but after migration the migrated user is not able to connect through MS Outlook even not able to login into
OWA. It gives error “The Outlook Web App address
https://mail.abc.com/owa is out of date.”
Kindly let us know how to solve this issue.
Kindly let me know if you want any more information from our end.
Thanks in advance.
Thanks and Regards, Shashank Kudi

Hi Shashank,
Do you have certificates properly installed and configured in the target Exchange?
If not, Please configure certificate and import the certificate to the trusted root CA if you are using internal CA cert.
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

HT4796 Is it possible to migrate Exchanger Server mailboxes to an apple enviornment?

I would like to find out if it's possible to migrate Exchange 2007 Server Mailboxes to an Apple Environment. If the answer is yes, does anybody knows how this can be achieved? What tools and methods will be used and are there any requirements in terms of H/W, S/W, O/S, etc...

You could connect your old MacBook to your TV with an adapter cable and play directly from it as well as stream from shared libraries. Depending on how old your MacBook is, however, you may need to use a separate cable for audio and the video quality may not be as good as with an ATV.

Migrate exchange 2003 to exchange online from EAC.

Hi,
I have to migrate my local exchange 2003 to my new exchange online from office365.
I have to make a Cuteover migrate (complete migrate .... sorry for my english). I understand i have to use a batch to import my on-premise exchange to exchange 365. My question is : does the batch do a "cut-paste" or a "copy-paste" of
my local data to online data ? do i will lost all local user mailbox data(mail contact calendar) ?
Thanks you
Julien

Hi, first of all let me tell that the process from the ECP will create a single batch job for cutover migration, secondly, the process will consist of migrating Exchange mailboxes, contacts and Distribution Groups but the source content will remain as is
not a cut/paste operation.
If you want more info about the process I recommend you to read the following:
http://technet.microsoft.com/en-us/library/jj874016(v=exchg.150).aspx
Alberto Pascual MVP-MCSA-MCITP-MCTS-MCP-O365MS-MCC http://blogs.itpro.es/guruxp

Migrating Exchange to Sun Communcation Suite

Hi,
do you have experiences with migrating Exchange to Comunications Suite ?
Is Sun Groupware Migration Toolkit available for partners ?
I appreciate your hints and comments,
Thank you,
Stefan

varga_stean wrote:
Is Sun Groupware Migration Toolkit available for partners ?You would need to ask the Sun group that maintains the toolkit. Send me an email and I will point you in the right direction (shjorth at gmail dot com)
Regards,
Shane.

Migrate Exchange 2010 public folders cross forests

Hi,
Due to some Exchange and Active Directory issues (with remnants of old Ex 2003 server), we are going to migrate Exchange 2010 Mailboxes and public folders to a new Exchange 2010 Sp3 server, which is created in a new AD forest.
One thing we still have to decide, which is how to migrate public folders.
Apparently there are 2 ways:
1. To export PF data to PST and then import using Outlook in destination Exchange server
2. To use interorg replication tool to replicate PFs cross forest in target Exchange Server.
I would really appreciate if someone suggests which one is best. We have around 100GB of PF data.
Also, should we migrate Public Folders first? We think that we should move Mailboxes first.
Thanks in anticipation.
Regards, David Johnson

Hi,
Yes, when we decide to migrate from one Exchange server to another server, we need to move mailbox first.
About migrating public folders, both of these two solutions are available, I think that the first one is simpler.
Here is a similar thread for your reference.
http://social.technet.microsoft.com/Forums/exchange/en-US/e3a23acd-efd2-4e51-bf4d-cb94b4b88a9f/exchange-2010-public-folder-cross-forest-replication-tool?forum=exchange2010
Hope this helps.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Migrate Exchange 2003 to Office 365

Dear all,
We are going to migrate Exchange 2003 to Office 365. Because of the large number of mailboxes and mail databases, we decide to build hybrid to support coexistence during the migration period.
According to "Exchange Server Deployment Assistant" I found that we can build more Exchange 2010 for that requirement
http://technet.microsoft.com/en-us/exdeploy2013/Checklist?state=2419-W-BwAIAAAAQAAAAAEAiFIAAAA~
I just wonder that after deploying the Exchange 2010, can we move directly the mailboxes from Exchange 2003 to Office 365 or we need to move to Exchange 2010 first (as a "buffer") before moving to Office 365
Thanks a lot !!!

Hello,
The main goal of a staged migration is to migrate Exchange on-premises servers when:
1. You have more than 2000 mailboxes.
2. You plan to migrate over a few weeks and months rather than in a single batch.
3. You want to migrate to the Cloud completely and remove your on-premises Exchange deployment.
Hybrid scenarios are useful when you do not want to remove your on-premises deployment. In some cases there is no technical possibility, it is not cost-effective etc. to move a whole organization to Office 365. In these situations you may decide that moving
only some mailboxes to Office 365 is a good option and create a hybrid deployment.
You need to consider all pros and cons, especially when Exchange 2003 has gone out of support lifecycle and then choose the better option for your organization.
Hope it helps,
Adam
CodeTwo: Software solutions for Exchange and Office 365
If this post helps resolve your issue, please click the "Mark as Answer" or "Helpful" button at the top of this message. By marking a post as Answered, or Helpful you help others find the answer faster.

PF migration 2007 - 2013 FailedOther

A Public folder migration 2007 -> 2013 is failing with the status detail: FailedOther
Error message: There are multiple primary SMTP addresses. Please ensure there is only one primary address for address type.
I can see the Identity as a guid, but can’t seem to identify what public folder is causing the error. Is there a way to see GUID to PF Names mapping?
Thanks

Hello,
Come back and mark the replies as answers if they help and unmark them if they provide no help.
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Cara Chen
TechNet Community Support

Migrating Exchange 2013 public mailboxes to a new server

We have a client that is leaving their current Hosting company and wants to move to our hosting facility. We have recreated their DC,an Exchange Hub, and Exchange Store. We have exported and imported all of their recipient mailboxes and flipped the switch
and all mail flow is now going through our hosting facility. The problem lies in that I can not figure out how to move the public mailboxes out of the old exchange server and import it into the new server. Both are Exchange 2013 and running on windows server
2012. Any help would be greatly appreciated.

You're looking at a third-party product. MigrationWiz does public folders. There are other cloud-based migration solutions, but I don't know whether they support public folder migrations.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Migration Exchange 2013 to Exchange 2013

Similar Messages

Maybe you are looking for