Migration fails at Upgrading services
G4 Xserve with 10.4.11, static ip, normal collection of apps and services over a period of 8 years (very happy with the machine). User homes, around 50Gb, mounted on a separate drive from the boot drive. I just bought a new Xserve with SSD for OS and three drives for a raid. I install the new machine in the rack, try to startup and realize that it can't find a boot drive, open the cabinet, and find the SSD drive loose inside. I plug it back in and go through Server Setup Assistant. I choose to migrate from my 10.4.11 machine using target disc mode. All appears to be working fine, it says it successfully migrated my info. I click continue and a dialog called "Setting Up" appears with a yellow dot beside "Setting serial number" and a message in the lower left corner that says "Upgrading services". The interface appears to be stalled at this point for hours. I let it run overnight, and it never proceeds past this dialog. At some point, I get an error that the hard disc is almost full. I restart the next morning and despite trying multiple solutions mentioned in the forums (unplugging the network cable, starting in single use mode and editing the hosts file, reinstalling the OS from the Install disc and starting over, etc) I still cannot get past this dialog. I can't log in and set things manually....nothing. The SSD drive is 128GB and I can't recall exactly how much was on my original boot drive, but it wasn't more than 20 Gb. Could the migration assistant be trying to pack all 50Gb of my User home directories (on a separate drive previously) onto my new boot drive and causing problem?
Any ideas on how I can get past the wizard so I can fix things manually, somehow?
Thanks for any help...it's been 3 days of misery.
Jack
i'd recommend not upgrading your config and instead starting with a fresh install of 10.6 server.
for the service config, export the settings on the old server and import them on the new.
for user accounts, export users, groups, etc. and import on the new server. enough has changed with both service config and OD between 10.4 and 10.6 that i recommend staying away from a straight migration in place. the exported users will have their passwords wiped, but you can set them to defaults and require changing them on first login with ldap policy.
as for data, just move it in place as needed with rsync or your tools of choice. since you have the 3 internal drives separate from your ssd boot, dump all data on them. it's possible the migration copied too much data to the boot drive, thus filling it. since i never do such upgrades/migrations, i'm not sure, though.
strangely, the xserve with ssd i most recently configured also had the ssd drive disconnected and floating inside the case. thanks, quality control…
Similar Messages
-
Mailbox migration failing after Upgrading CU5 - CU6
hello fellow readers,
we have an Exchange 2007 (latest needed Patchlevel) / Exchange 2013 CU6 Environment and are now having trouble migrating user mailboxes from the Ex2007 mailbox server to the new Ex2013 server.
migration of the first boxes before applying CU6 went fine and smooth, but now all mailbox moves are stuck with the status "Qeued".
a ps command "get-moverequeststatistics karl.treiber" brings the following
Postfach 'Karl Treiber' wird zurzeit nicht verschoben. + CategoryInfo : InvalidArgument: (karl.treiber:MoveRequestIdParameter) [Get-MoveRequestStatistics], Mana gementObjectNotFoundException + FullyQualifiedErrorId : [Server=SERVERNAME,RequestId=bf51511d-c7b8-4b39-ad60-caa71015cc6c,TimeStamp=10.11.2014 11 :27:29] [FailureCategory=Cmdlet-ManagementObjectNotFoundException] 9B1AC428,Microsoft.Exchange.Management.Recipien tTasks.GetMoveRequestStatistics + PSComputerName : SERVERNAME.DOMAIN.local
i'm guessing that this is correct, as the migration hasn't started yet. in somehow similar threads people suggest putting the BadItemLimit higher, so i tried running ps command "set-moverequest karl.treiber -baditemlimit 9999" bringing the following
ARNUNG: Wenn ein Element nicht aus der Quelldatenbank gelesen oder in die Zieldatenbank geschrieben werden kann, wird
es als beschädigt betrachtet. Wenn Sie für 'BadItemLimit' einen anderen Wert als Null angeben, fordern Sie an, dass
Exchange diese Elemente nicht in das Zielpostfach kopiert. Nach Abschluss der Verschiebung sind diese beschädigten
Elemente nicht im Zielpostfach verfügbar.
Der Vorgang konnte nicht ausgeführt werden, weil keine Objekte des Typs
'Microsoft.Exchange.MailboxReplicationService.TransactionalRequestJob' auf 'DC.DOMAIN.local' gefunden wurden.
+ CategoryInfo : NotSpecified: (:) [Set-MoveRequest], ManagementObjectNotFoundException
+ FullyQualifiedErrorId : [Server=SERVERNAME,RequestId=ab82c24b-7914-4382-8de2-34462d4993b3,TimeStamp=10.11.2014 11
:38:01] [FailureCategory=Cmdlet-ManagementObjectNotFoundException] 285DB966,Microsoft.Exchange.Management.Recipien
tTasks.SetMoveRequest
+ PSComputerName : SERVERNAME.DOMAIN.local
my guess is, that something is missing in AD - but what? DC replication is checked and working as normal. i looked up the AD object of the user, searchung for Exchange values, finding some connecting to mailbox
moves, but none similar to "Microsoft.Exchange.MailboxReplicationService.TransactionalRequestJob".
everything worked in CU5 -> after updating to CU6 we had serious issues with mailbox databases in dirty shutdown and called MS or help. as mentioned
here this was a known error and they gave us the
hotfix for that. the hotfix seemed to be so "hot" that it fixed the database problem but brought new ones, as the fix seems to not check Exchange installation path, assuming its always c:\Program Files\... (which it is not in our case).
here they suggest to run "setup /preparedomain" again, but i am worried about possible new problems.
has anyone suggestions what to check?Hello KidStealth,
Please try the following steps:
1. Configure the database:
Get-MailboxDatabase | Set-MailboxDatabase –DataMoveReplicationConstraint None
2. We can run prepare domain, it will not cause any issue as I know.
3. Then we can try to move the mailboxes.
If issue persists, in my experience, this issue could be related to the corrupted items within the mailbox folders, so please remove the old move request, start a
new move request, use parameter “–verbose” behind the move request command, then check the detailed error message. Or we can check via command:
Get-MoveRequestStatistics -Identity “mailbox_name” –IncludeReport | fl >C:\error.txt
Please post the detailed error message. It it’s in English, I would appreciate it.
Regards, Eric Zou -
What to do when SLS - Lion Server Upgrade & Migration Fail
Hi everyone,
I've had a tough time over the past week trying to updating my SLS to LS. (It was a slow week at the office so despite the warnings in these discussions I wasn't disturbing anyone, so I thought I'd try...) Both an upgrade to the current running system and a clean install on a wipe of that hard drive stall at the "Configuring Services" "Upgrading services" screen of the set up process. The migration path eventually fails, and as far as I can tell, it seems that the upgrade path just stays there forever.
Don't worry - I'm doing this all on a Super Duper! clone of my primary drive, so I can go back to SLS whenever I need to.
BUT, I can tell that the server's status is at least partially okay, even in this stalled setup state - iChat seems to work on various clients, and I can use Server Admin to see stats and services, etc.
So despite the discomfort of a failed install, part of me feels like I'll be fine with the LS if I can just figure out how to move my old data into the right places for the new system to use it. But I can't find any guidance for that. I'm looking to migrate OD (seems to have migrated fine), iCal, iChat, Address Book, Wikis, Time Machine, and File Sharing (which should be trivial to set up, I reckon).
Can anyone point me in the right direction?
Thanks very much,
WillhausOkay, so I've had some marginal success.
After leaving the hung install for a ridiculous amount of time (24+ hours), I realized that I could click the help button, and from the help window click the "further info about Lion Server" link to launch Safari. That gave me access to Software Update from the Apple menu, which then let me install the latest Safari update which conveniently enough requires a restart.
After restart, the Server Migration Assistant kicked in again, but failed quickly in the upgrading services stage. Another restart, and the sever finally booted more or less normally.
The strange thing was that although chat services worked fine during the hung install, all OD-related services stopped working after restarting. Turns out there were no users or groups in OD. Importing them from an OD archive, though, restored them.
So now iChat works great (even the old chat longs migrated successfully), and AFP is properly sharing our volumes across our studio's network. So our server is limping along.
The other services we need that aren't up yet are Wiki and iCal. Some info about those:
Wiki: administrators can log in and see all wikis just fine. That's awesome because it means the data migrated successfully. Any non-admin users can log in, but are then get a wiki-styled page that says simply "No wikis found". It's as if they don't have permissions to see the wikis, even though in Server.app they belong to the groups that the wikis are associated with. I've tried removing and re-adding users to groups, but that doesn't seem to do it. Any ideas how to fix this?
Calendar: While I can't get this to work, it's not like it's completely lifeless. An account in a client Lion iCal configured with the proper Lion settings returns an error that reads:
"The Server is Busy or Unavailable.
"The server at myserver.com is currently unable to handle the connection for account “ Calendars” due to a temporary overloading or maintenance of the server. If this continues you should contact the server administrator.
"You may try to connect to the server again or take the account offline."
As a logged in administrator, in a wiki clicking on Calendar in the nab bar goes to the calendar style page with an unending dialogue box that reads "Getting events from server". And clicking on Calendar from Home page footer takes me to the URL https://myserver.com/webcal with an error that says:
"Service Temporarily Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Apache/2.2.20 (Unix) mod_ssl/2.2.20 OpenSSL/0.9.8r DAV/2 Server at myserver.com Port 443"
Again, at least I'm confident that the data migrated properly - I can find all the calendar data in it's proper new location - but either the service won't start or something's not configured correctly. I've tried chaining the hostname and restarting the service about a billion times. I've got no idea what to try next. Any ideas?
Thank you so much,
Willhaus -
Upgrade service error after ZFD3 SP3 to ZFD4.01 upgrade
Hi,
Having upgraded from ZFD3.2 SP3 to ZFD4.01 and carefully following the
documentation instructions I still get the following error on the Inventory
Service startup screen:
"The Upgrade Service is migrating the schema
An error has occurred. The upgrade service is exiting now."
The Inv Srv object Server Status log says:
"1178: An error occured while performing the DBSchema migration
1177: Unable to complete all the operations, the upgrade service is exiting
with errors.
106: The Storer succesfully connected to the database
108:the database in not initialized as it is being upgraded"
All of these errors on the support site have as a fix either restart the
Inventory Service or contact Novell.
I've spent some hours now looking for a fix on Knowledgebase and in the Zen
forums but can't find anything useful. This is the second time I've run the
upgrade and this problem has occurred. I've reinstalled Zen3.2 from scratch,
applied SP1 and SP3.
I've checked policies and database objects, all appears as it should be.
These seem to be the relevant errors from the log files:
Migration Log:
Migration Exception Message->Could not add the dbspace..ASA Error -121:
Permission denied: unable to create the dbspace file "CIM10",
SQLState->42501, ErrorCode->262
Zenworksinvservice log file:
[12/2/04 12:37:04.691] ZenInv - Upgrade Service: migrateDbToP1(true) failed
in AlterProcedure
[12/2/04 12:37:05.286] ZenInv - Upgrade Service: Upgrade to ZfD4.0 or ZFS3.0
SP1 failed. Reinstall ZFD4.0 or ZFS3.0 SP1 and start the inventory server
again
See full logs below.
Is there no option but to go straight to Novell?
Regards,
Steve Law
zenworksinvservice-041202123653303.txt
[12/2/04 12:36:53.280] ZENInv - Service Loader: getAttributesofDN:
Attributes of:
[12/2/04 12:36:53.349] ZENInv - Service Loader:
getAttributes:Attributes={zeninvhostserver=zeninvH ostServer: Distinguished
Name CN=SERVER1.OU=BMO.OU=UK.O=OURTREE, zeninvrole=zeninvRole: Integer 25}
[12/2/04 12:36:53.358] ZENInv - Service Loader: Logout from NDS returnedtrue
[12/2/04 12:36:53.725] ZENInv - Server Config: The severconfig service start
is pending...
[12/2/04 12:36:53.784] ZENInv - Server Config: getAttributesofDN: Attributes
of:
[12/2/04 12:36:53.827] ZENInv - Server Config:
getAttributes:Attributes={zeninvscanfilepath=zenin vScanFilePath: Case Ignore
String \\SERVER1\DATA\Zenworks\ScanDir, zeninvrole=zeninvRole: Integer 25,
zeninvcomponentstatus=zeninvComponentStatus: 4.0 12 0}
[12/2/04 12:36:53.832] ZENInv - Server Config: Logout from NDS returnedtrue
[12/2/04 12:36:53.838] ZENInv - Server Config: Getting Cascade INit time
[12/2/04 12:36:54.844] ZENInv - Server Config: Database Location Policy DN
is CN=Zen32 Server Package:General:ZENworks
Database.OU=Policies.OU=BMO.OU=UK.O=OURTREE
[12/2/04 12:36:54.887] ZENInv - Server Config: getAttributesofDN: Attributes
of:
[12/2/04 12:36:54.918] ZENInv - Server Config:
getAttributes:Attributes={zenlocdatabaseobject=zen locDatabaseObject:
Distinguished Name CN=SERVER1_invDatabase.OU=BMO.OU=UK.O=OURTREE}
[12/2/04 12:36:54.923] ZENInv - Server Config: Logout from NDS returnedtrue
[12/2/04 12:36:54.967] ZENInv - Server Config: getAttributesofDN: Attributes
of:
[12/2/04 12:36:55.001] ZENInv - Server Config:
getAttributes:Attributes={zendbpassword=zendbPassw ord: novell,
zendbjdbcprotocol=zendbJDBCProtocol: jdbc:,
zendbdatabasetype=zendbDatabaseType: Integer 0,
zendbjdbcsidservice=zendbJDBCSIDService: 11.32.25.98, zendburl=zendbURL:
Case Ignore String
jdbc:sybase:Tds:11.32.25.98:2638?ServiceName=mgmtd b&JCONNECT_VERSION=4,
zendbjdbcsubname=zendbJDBCSubName: Tds:, zendbjdbcdriver=zendbJDBCDriver:
com.sybase.jdbc.SybDriver, host server=Host Server: Distinguished Name
CN=SERVER1.OU=BMO.OU=UK.O=OURTREE, network address=Network Address: 13;20;,
zendbuser=zendbUser: MW_DBA, zendbjdbcsubprotocol=zendbJDBCSubProtocol:
sybase:, zendbjdbcport=zendbJDBCPort: 2638}
[12/2/04 12:36:55.013] ZENInv - Server Config: Logout from NDS returnedtrue
[12/2/04 12:36:56.297] ZENInv - Server Config: The severconfig service is
started...
[12/2/04 12:36:56.320] ZENInv - Sync Scheduler: The scheduler service start
is pending...
[12/2/04 12:36:56.382] ZENInv - Sync Scheduler: getAttributesofDN:
Attributes of:
[12/2/04 12:36:56.459] ZENInv - Sync Scheduler:
getAttributes:Attributes={zeninvsyncrepeatinterval =zeninvSyncRepeatInterval:
>
[12/2/04 12:36:56.463] ZENInv - Sync Scheduler: Logout from NDS returnedtrue
[12/2/04 12:36:56.585] ZENInv - Sync Scheduler: This is the schedule
fetchedRun Daily: Monday, Tuesday, Wednesday, Thursday, Friday From 00:00:00
To 22:55:00 (Randomly dispatch during time period)
[12/2/04 12:36:56.597] ZENInv - Sync Scheduler: fetchSchedule returned: true
[12/2/04 12:36:56.597] ZENInv - Sync Scheduler: Schedule Fired
[12/2/04 12:36:56.597] ZENInv - Sync Scheduler: The scheduler service is
started...
[12/2/04 12:36:56.721] ZenInv - Upgrade Service: getAttributesofDN:
Attributes of:
[12/2/04 12:36:56.752] ZenInv - Upgrade Service:
getAttributes:Attributes={zeninvcomponentstatus=ze ninvComponentStatus: 4.0
12 0}
[12/2/04 12:36:56.756] ZenInv - Upgrade Service: Logout from NDS
returnedtrue
[12/2/04 12:36:56.758] ZenInv - Upgrade Service: Info : Read
zenInvComponentStatus = 4.0 12 0
[12/2/04 12:36:56.758] ZenInv - Upgrade Service: Inventory Server
zenInvComponentStatus = 4.0 12 0
[12/2/04 12:36:56.789] Service Manager: start(ServiceDataAccessor, String[])
not found in
'com.novell.zenworks.desktop.inventory.strconverte r.STRConverterServiceInit'
[12/2/04 12:36:56.815] ZENInv - STRConverter: Start with
'ServiceStatusChangeListener' invoked
[12/2/04 12:37:04.691] ZenInv - Upgrade Service: migrateDbToP1(true) failed
in AlterProcedure
[12/2/04 12:37:04.807] ZENInv - Status Reporting: Messages are written into
XML file for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
[12/2/04 12:37:04.845] ZENInv - Status Reporting: getAttributesofDN:
Attributes of:
[12/2/04 12:37:04.881] ZENInv - Status Reporting:
getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "-O j,
"- l, "Tw s, "Ty T, "T j, "T-
l, " s, " T, "6 j, "9Y l}
[12/2/04 12:37:04.898] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:04.912] ZENInv - Status Reporting: Number of records to add
are: 1 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
[12/2/04 12:37:04.951] ZENInv - Status Reporting: getAttributesofDN:
Attributes of:
[12/2/04 12:37:04.984] ZENInv - Status Reporting:
getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "-O j,
"- l, "Tw s, "Ty T, "T j, "T-
l, " s, " T, "6 j, "9Y l}
[12/2/04 12:37:04.990] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:04.991] ZENInv - Status Reporting: Adding record 0 for
DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
[12/2/04 12:37:05.113] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:05.209] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:05.246] ZENInv - Status Reporting: getAttributesofDN:
Attributes of:
[12/2/04 12:37:05.277] ZENInv - Status Reporting:
getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "- l,
"Tw s, "Ty T, "T j, "T- l, "
s, " T, "6 j, "9Y l, "~; s}
[12/2/04 12:37:05.284] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:05.285] ZENInv - Status Reporting: Number of modified records
are: 0 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
[12/2/04 12:37:05.286] ZenInv - Upgrade Service: Upgrade to ZfD4.0 or ZFS3.0
SP1 failed. Reinstall ZFD4.0 or ZFS3.0 SP1 and start the inventory server
again
[12/2/04 12:37:05.288] ZENInv - Status Reporting: Messages are written into
XML file for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
[12/2/04 12:37:05.326] ZENInv - Status Reporting: getAttributesofDN:
Attributes of:
[12/2/04 12:37:05.358] ZENInv - Status Reporting:
getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "- l,
"Tw s, "Ty T, "T j, "T- l, "
s, " T, "6 j, "9Y l, "~; s}
[12/2/04 12:37:05.364] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:05.365] ZENInv - Status Reporting: Number of records to add
are: 1 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
[12/2/04 12:37:05.403] ZENInv - Status Reporting: getAttributesofDN:
Attributes of:
[12/2/04 12:37:05.435] ZENInv - Status Reporting:
getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "- l,
"Tw s, "Ty T, "T j, "T- l, "
s, " T, "6 j, "9Y l, "~; s}
[12/2/04 12:37:05.441] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:05.445] ZENInv - Status Reporting: Adding record 0 for
DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
[12/2/04 12:37:05.568] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:05.670] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:05.707] ZENInv - Status Reporting: getAttributesofDN:
Attributes of:
[12/2/04 12:37:05.738] ZENInv - Status Reporting:
getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "Tw s,
"Ty T, "T j, "T- l, " s, "
T, "6 j, "9Y l, "~; s, "s? T}
[12/2/04 12:37:05.747] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:05.748] ZENInv - Status Reporting: Number of modified records
are: 0 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
[12/2/04 12:37:05.767] ZenInv - Upgrade Service: [EnumModifier]
modifyEnumTables, Running EnumModifier in integrated mode with
upgradeService
[12/2/04 12:37:05.767] ZenInv - Upgrade Service: [EnumModifier]
modifyEnumTables, dbDriver:com.sybase.jdbc.SybDriver
[12/2/04 12:37:05.767] ZenInv - Upgrade Service: [EnumModifier]
modifyEnumTables,
dbURL:jdbc:sybase:Tds:11.32.25.98:2638?ServiceName =mgmtdb&JCONNECT_VERSION=4
[12/2/04 12:37:05.768] ZenInv - Upgrade Service: [EnumModifier]
modifyEnumTables, dbType:0
[12/2/04 12:37:05.768] ZenInv - Upgrade Service: [EnumModifier]
modifyEnumTables, dbUser:MW_DBA
[12/2/04 12:37:05.768] ZenInv - Upgrade Service: [EnumModifier]
modifyEnumTables, dbPasswd:novell
[12/2/04 12:37:06.844] Service Manager: start(ServiceDataAccessor, String[])
not found in
'com.novell.zenworks.desktop.inventory.selector.Se lectorServiceInit'
[12/2/04 12:37:07.046] ZENInv - Selector: Selector Services Started
Successfully
[12/2/04 12:37:07.046] Service Manager: start(ServiceDataAccessor, String[])
not found in
'com.novell.zenworks.desktop.inventory.storer.Stor erServiceInit'
[12/2/04 12:37:07.062] ZENInv - Selector: Selector Code Profiling disabled
[12/2/04 12:37:07.067] ZENInv - Storer: Start with
'ServiceStatusChangeListener' invoked
[12/2/04 12:37:17.010] ZENInv - Selector: Getting ServerConfig HashTable
[12/2/04 12:37:17.010] ZENInv - Selector: Getting InvServiceObj from
HashTable
[12/2/04 12:37:17.011] ZENInv - Selector: Getting NDSTree from ServiceObject
[12/2/04 12:37:17.013] ZENInv - Selector: NDSTree=null
[12/2/04 12:37:17.014] ZENInv - Selector: Getting InventoryServiceDN from
ServiceObject
[12/2/04 12:37:17.014] ZENInv - Selector:
InventoryServiceDN=CN=SERVER1_ZenInvService.OU=BMO .OU=UK.O=OURTREE
[12/2/04 12:37:17.014] ZENInv - Selector: Getting ScanDir from ServiceObject
[12/2/04 12:37:17.015] ZENInv - Selector: ScanDir=DATA:\Zenworks\ScanDir
[12/2/04 12:37:17.021] ZENInv - Selector: NEW SyncServiceTable Constructor
Invoked
[12/2/04 12:37:17.022] ZENInv - Selector: Creating-Verifying
Serialize-Deserialize Location DATA:\Zenworks\ScanDir\stable\
[12/2/04 12:37:17.022] ZENInv - Selector: Checking for
DATA:\Zenworks\ScanDir\stable\
[12/2/04 12:37:17.023] ZENInv - Selector: synchTableDir exists. Check wether
this is a directory or File
[12/2/04 12:37:17.024] ZENInv - Storer: Storer from dblocation user: MW_DBA
driver: com.sybase.jdbc.SybDriver protocol: jdbc:sybase: subname: Tds: port:
2638
[12/2/04 12:37:17.024] ZENInv - Selector: Directory
ExistsDATA:\Zenworks\ScanDir\stable\
[12/2/04 12:37:17.024] ZENInv - Selector: Directory Existence
ConfirmedDATA:\Zenworks\ScanDir\stable\
[12/2/04 12:37:17.025] ZENInv - Selector: Serialize-Deserialize File
DATA:\Zenworks\ScanDir\stable\STABLE.SER
[12/2/04 12:37:17.025] ZENInv - Selector: Initializing SyncServiceTable
[12/2/04 12:37:17.025] ZENInv - Selector: SynchTable Does not Exist
[12/2/04 12:37:17.026] ZENInv - Selector: Attempting to Load SynchTable From
Serialized File
[12/2/04 12:37:17.026] ZENInv - Selector: DeSerializing hashTable
FromDATA:\Zenworks\ScanDir\stable\STABLE.SER
[12/2/04 12:37:17.029] ZENInv - Storer: url[From DBObject]:
jdbc:sybase:Tds:11.32.25.98:2638?ServiceName=mgmtd b&JCONNECT_VERSION=4
[12/2/04 12:37:17.035] ZENInv - Storer: wsdn:
CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREEi = 0
[12/2/04 12:37:17.037] ZENInv - Selector: DeSerializing SyncService
HashTable
[12/2/04 12:37:17.041] ZENInv - Selector: SynchTable Loaded Sucessfully From
Serialized File
[12/2/04 12:37:17.042] ZENInv - Selector: Getting hasDatabase status from
ServiceObject
[12/2/04 12:37:17.042] ZENInv - Selector: hasDatabase is true from
ServiceObject
[12/2/04 12:37:17.042] ZENInv - Selector: Getting isStandAlone status from
ServiceObject
[12/2/04 12:37:17.043] ZENInv - Selector: isStandAlone is true from
ServiceObject
[12/2/04 12:37:17.043] ZENInv - Selector: ConvDir
DATA:\Zenworks\ScanDir\conv\
[12/2/04 12:37:17.044] ZENInv - Selector: ConvDir exists. Check wether this
is a directory or File
[12/2/04 12:37:17.044] ZENInv - Selector: DATA:\Zenworks\ScanDir
[12/2/04 12:37:17.045] ZENInv - Selector: DATA:\Zenworks\ScanDir\DbDir
[12/2/04 12:37:17.045] ZENInv - Selector:
[12/2/04 12:37:17.048] ZENInv - Selector: Getting SELECTOR_STORER Synch
Object
[12/2/04 12:37:17.049] ZENInv - Selector: Getting SELECTOR_COLLECTOR Synch
Object
[12/2/04 12:37:17.049] ZENInv - Selector: Getting SELECTOR_CONVERTER Synch
Object
[12/2/04 12:37:17.049] ZENInv - Selector: Getting CONVERTER_SELECTOR Synch
Object
[12/2/04 12:37:17.050] ZENInv - Selector: Getting SYNCHSERVICE_SELECTOR
Synch Object
[12/2/04 12:37:17.061] ZENInv - Storer: Loading Storer test properties file
[12/2/04 12:37:17.080] Service Manager: start(ServiceDataAccessor, String[])
not found in
'com.novell.zenworks.common.inventory.scancollecto r.ScanCollector'
[12/2/04 12:37:17.338] ZENInv - IFS Server: zenInvScanCollector:
FileServiceController: Startup Properties: {chunksize=4096,
lockfactory=com.novell.zenworks.common.inventory.i fs.utils.MemoryFileLockFac
tory, lockseed=ScanSelectorLock, transfers=100,
rootdirectory=DATA:\Zenworks\ScanDir, timeout=60000,
servicename=zenInvScanCollector, portnumber=0}
[12/2/04 12:37:17.499] Service Manager: start(ServiceDataAccessor, String[])
not found in
'com.novell.zenworks.desktop.inventory.InvSyncServ ice.ManagableSyncService'
[12/2/04 12:37:17.579] ZENInv - Inventory Sync Service: SyncService thread
started
[12/2/04 12:37:17.579] ZENInv - Inventory Sync Service: NEW SyncServiceTable
Constructor Invoked
[12/2/04 12:37:17.580] ZENInv - Inventory Sync Service: Creating-Verifying
Serialize-Deserialize Location DATA:\Zenworks\ScanDir\stable\
[12/2/04 12:37:17.580] ZENInv - Inventory Sync Service: Checking for
DATA:\Zenworks\ScanDir\stable\
[12/2/04 12:37:17.585] ZENInv - Inventory Sync Service: synchTableDir
exists. Check wether this is a directory or File
[12/2/04 12:37:17.585] ZENInv - Inventory Sync Service: Directory
ExistsDATA:\Zenworks\ScanDir\stable\
[12/2/04 12:37:17.586] ZENInv - Inventory Sync Service: Directory Existence
ConfirmedDATA:\Zenworks\ScanDir\stable\
[12/2/04 12:37:17.586] ZENInv - Inventory Sync Service:
Serialize-Deserialize File DATA:\Zenworks\ScanDir\stable\STABLE.SER
[12/2/04 12:37:17.587] ZENInv - Inventory Sync Service: Initializing
SyncServiceTable
[12/2/04 12:37:17.587] ZENInv - Inventory Sync Service: Will Use the
existing SyncServiceTable
[12/2/04 12:37:18.445] ZENInv - Status Reporting: Messages are written into
XML file for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
[12/2/04 12:37:18.484] ZENInv - Status Reporting: getAttributesofDN:
Attributes of:
[12/2/04 12:37:18.520] ZENInv - Status Reporting:
getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "Tw s,
"Ty T, "T j, "T- l, " s, "
T, "6 j, "9Y l, "~; s, "s? T}
[12/2/04 12:37:18.525] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:18.526] ZENInv - Status Reporting: Number of records to add
are: 1 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
[12/2/04 12:37:18.564] ZENInv - Status Reporting: getAttributesofDN:
Attributes of:
[12/2/04 12:37:18.595] ZENInv - Status Reporting:
getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "Tw s,
"Ty T, "T j, "T- l, " s, "
T, "6 j, "9Y l, "~; s, "s? T}
[12/2/04 12:37:18.600] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:18.601] ZENInv - Status Reporting: Adding record 0 for
DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
[12/2/04 12:37:18.699] ZENInv - Status Reporting: Logout from NDS
returnedtrue
[12/2/04 12:37:18.783] ZENInv - Status Reporting: Logout from NDS
returnedtrue
Migration Log
Starting the AlterProcedure Log at 2004-12-02 11:45:29.731
Unzipping the file migrate.zip
Transforming the Migration SQL files...
...3
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Initial_0
is copied
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
nPotsModem_1 is done with 545 0x03010c0a010202
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
nOperatingSystem_2 is done with 143 0x03010e02
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
nNetworkAdapter_3 is done with 544 0x03010c0b04
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
nDiskDrive_4 is done with 543 0x03010c080301
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Wi
nOperatingSystem_5 is done with 547 0x03010e0201
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\zenworks_vi
deoadapter_6 is done with 53 0x03010c030c0201
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Sy
stemInfo_7 is done with 228 0x03020404
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_so
undadapter_8 is done with 546 0x03010c16
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Mo
therboard_9 is done with 221 0x0302040101
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Lo
gicalDiskDrive_10 is done with 113 0x03010c110402
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_in
ventoryscanner_11 is done with 181 0x03011402
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_in
stalleddriver_12 is done with 548 0x2701
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_In
stalledDirectory_13 is done with 551 0x4a
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_bu
s_14 is done with 35 0x03010c0301
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_bi
os_15 is done with 180 0x0301140101
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\ManageWise_
CurrentLoginUser_16 is done with 549 0x48
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\ManageWise_
LastLoginUser_17 is done with 550 0x49
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\ManageWise_
User_18 is done with 205 0x03011a
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\misc_19 is
copied
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybcustom_2
0 is copied
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybdelprocs
_21 is copied
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybextended
_22 is copied
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybrmaudit_
23 is copied
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\CIM_Process
or_24 is copied
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ne
twareOperatingSystem_24 is done with 142 0x03010e01
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\indytoprom_
26 is copied
\DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Post_30 is
copied
Starting Schema Migration
Adding the extra db spaces...
SELECT file_name FROM SYSFILE WHERE dbspace_name LIKE '%CIM9%'
has the results
File_NAME=mgmtdb9.db
dbfile's base directory =
SELECT file_name FROM SYSFILE WHERE dbspace_name LIKE '%CIM10%'
CREATE DBSPACE CIM10 AS 'mgmtdb10.db'
Totaltime taken for Schema Migration : 149
Migration Exception Message->Could not add the dbspace..ASA Error -121:
Permission denied: unable to create the dbspace file "CIM10",
SQLState->42501, ErrorCode->262I am getting identical errors with NW6.5 SP3, edir 8.7.3.6 upgrading from
ZFD4.01 to ZFD6.5. Haven't found any knowledgebase items on it.
Thanks,
Doug Streit
> Extra info: this is a NW6.5 SP2 server with edir 8.7.3.3, Sybase database.
>
> "SLaw" <[email protected]> wrote in message
> news:[email protected]...
> > Hi,
> >
> > Having upgraded from ZFD3.2 SP3 to ZFD4.01 and carefully following the
> > documentation instructions I still get the following error on the
> Inventory
> > Service startup screen:
> >
> > "The Upgrade Service is migrating the schema
> > An error has occurred. The upgrade service is exiting now."
> >
> > The Inv Srv object Server Status log says:
> >
> > "1178: An error occured while performing the DBSchema migration
> > 1177: Unable to complete all the operations, the upgrade service is
> exiting
> > with errors.
> > 106: The Storer succesfully connected to the database
> > 108:the database in not initialized as it is being upgraded"
> >
> > All of these errors on the support site have as a fix either restart the
> > Inventory Service or contact Novell.
> >
> > I've spent some hours now looking for a fix on Knowledgebase and in the
> Zen
> > forums but can't find anything useful. This is the second time I've run
> the
> > upgrade and this problem has occurred. I've reinstalled Zen3.2 from
> scratch,
> > applied SP1 and SP3.
> > I've checked policies and database objects, all appears as it should be.
> >
> >
> > These seem to be the relevant errors from the log files:
> >
> > Migration Log:
> > Migration Exception Message->Could not add the dbspace..ASA Error -121:
> > Permission denied: unable to create the dbspace file "CIM10",
> > SQLState->42501, ErrorCode->262
> >
> > Zenworksinvservice log file:
> > [12/2/04 12:37:04.691] ZenInv - Upgrade Service: migrateDbToP1(true)
> failed
> > in AlterProcedure
> > [12/2/04 12:37:05.286] ZenInv - Upgrade Service: Upgrade to ZfD4.0 or
> ZFS3.0
> > SP1 failed. Reinstall ZFD4.0 or ZFS3.0 SP1 and start the inventory server
> > again
> >
> > See full logs below.
> >
> > Is there no option but to go straight to Novell?
> >
> > Regards,
> >
> >
> > Steve Law
> >
> > zenworksinvservice-041202123653303.txt
> > *********************************
> > [12/2/04 12:36:53.280] ZENInv - Service Loader: getAttributesofDN:
> > Attributes of:
> > [12/2/04 12:36:53.349] ZENInv - Service Loader:
> > getAttributes:Attributes={zeninvhostserver=zeninvH ostServer: Distinguished
> > Name CN=SERVER1.OU=BMO.OU=UK.O=OURTREE, zeninvrole=zeninvRole: Integer 25}
> > [12/2/04 12:36:53.358] ZENInv - Service Loader: Logout from NDS
> returnedtrue
> > [12/2/04 12:36:53.725] ZENInv - Server Config: The severconfig service
> start
> > is pending...
> > [12/2/04 12:36:53.784] ZENInv - Server Config: getAttributesofDN:
> Attributes
> > of:
> > [12/2/04 12:36:53.827] ZENInv - Server Config:
> > getAttributes:Attributes={zeninvscanfilepath=zenin vScanFilePath: Case
> Ignore
> > String \\SERVER1\DATA\Zenworks\ScanDir, zeninvrole=zeninvRole: Integer 25,
> > zeninvcomponentstatus=zeninvComponentStatus: 4.0 12 0}
> > [12/2/04 12:36:53.832] ZENInv - Server Config: Logout from NDS
> returnedtrue
> > [12/2/04 12:36:53.838] ZENInv - Server Config: Getting Cascade INit time
> > [12/2/04 12:36:54.844] ZENInv - Server Config: Database Location Policy
> DN
> > is CN=Zen32 Server Package:General:ZENworks
> > Database.OU=Policies.OU=BMO.OU=UK.O=OURTREE
> > [12/2/04 12:36:54.887] ZENInv - Server Config: getAttributesofDN:
> Attributes
> > of:
> > [12/2/04 12:36:54.918] ZENInv - Server Config:
> > getAttributes:Attributes={zenlocdatabaseobject=zen locDatabaseObject:
> > Distinguished Name CN=SERVER1_invDatabase.OU=BMO.OU=UK.O=OURTREE}
> > [12/2/04 12:36:54.923] ZENInv - Server Config: Logout from NDS
> returnedtrue
> > [12/2/04 12:36:54.967] ZENInv - Server Config: getAttributesofDN:
> Attributes
> > of:
> > [12/2/04 12:36:55.001] ZENInv - Server Config:
> > getAttributes:Attributes={zendbpassword=zendbPassw ord: novell,
> > zendbjdbcprotocol=zendbJDBCProtocol: jdbc:,
> > zendbdatabasetype=zendbDatabaseType: Integer 0,
> > zendbjdbcsidservice=zendbJDBCSIDService: 11.32.25.98, zendburl=zendbURL:
> > Case Ignore String
> > jdbc:sybase:Tds:11.32.25.98:2638?ServiceName=mgmtd b&JCONNECT_VERSION=4,
> > zendbjdbcsubname=zendbJDBCSubName: Tds:, zendbjdbcdriver=zendbJDBCDriver:
> > com.sybase.jdbc.SybDriver, host server=Host Server: Distinguished Name
> > CN=SERVER1.OU=BMO.OU=UK.O=OURTREE, network address=Network Address:
> 13;20;,
> > zendbuser=zendbUser: MW_DBA, zendbjdbcsubprotocol=zendbJDBCSubProtocol:
> > sybase:, zendbjdbcport=zendbJDBCPort: 2638}
> > [12/2/04 12:36:55.013] ZENInv - Server Config: Logout from NDS
> returnedtrue
> > [12/2/04 12:36:56.297] ZENInv - Server Config: The severconfig service is
> > started...
> > [12/2/04 12:36:56.320] ZENInv - Sync Scheduler: The scheduler service
> start
> > is pending...
> > [12/2/04 12:36:56.382] ZENInv - Sync Scheduler: getAttributesofDN:
> > Attributes of:
> > [12/2/04 12:36:56.459] ZENInv - Sync Scheduler:
> >
> getAttributes:Attributes={zeninvsyncrepeatinterval =zeninvSyncRepeatInterval:
> > >
> > }
> > [12/2/04 12:36:56.463] ZENInv - Sync Scheduler: Logout from NDS
> returnedtrue
> > [12/2/04 12:36:56.585] ZENInv - Sync Scheduler: This is the schedule
> > fetchedRun Daily: Monday, Tuesday, Wednesday, Thursday, Friday From
> 00:00:00
> > To 22:55:00 (Randomly dispatch during time period)
> > [12/2/04 12:36:56.597] ZENInv - Sync Scheduler: fetchSchedule returned:
> true
> > [12/2/04 12:36:56.597] ZENInv - Sync Scheduler: Schedule Fired
> > [12/2/04 12:36:56.597] ZENInv - Sync Scheduler: The scheduler service is
> > started...
> > [12/2/04 12:36:56.721] ZenInv - Upgrade Service: getAttributesofDN:
> > Attributes of:
> > [12/2/04 12:36:56.752] ZenInv - Upgrade Service:
> > getAttributes:Attributes={zeninvcomponentstatus=ze ninvComponentStatus: 4.0
> > 12 0}
> > [12/2/04 12:36:56.756] ZenInv - Upgrade Service: Logout from NDS
> > returnedtrue
> > [12/2/04 12:36:56.758] ZenInv - Upgrade Service: Info : Read
> > zenInvComponentStatus = 4.0 12 0
> > [12/2/04 12:36:56.758] ZenInv - Upgrade Service: Inventory Server
> > zenInvComponentStatus = 4.0 12 0
> > [12/2/04 12:36:56.789] Service Manager: start(ServiceDataAccessor,
> String[])
> > not found in
> > 'com.novell.zenworks.desktop.inventory.strconverte r.STRConverterServiceIni
> t'
> > [12/2/04 12:36:56.815] ZENInv - STRConverter: Start with
> > 'ServiceStatusChangeListener' invoked
> > [12/2/04 12:37:04.691] ZenInv - Upgrade Service: migrateDbToP1(true)
> failed
> > in AlterProcedure
> > [12/2/04 12:37:04.807] ZENInv - Status Reporting: Messages are written
> into
> > XML file for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
> > [12/2/04 12:37:04.845] ZENInv - Status Reporting: getAttributesofDN:
> > Attributes of:
> > [12/2/04 12:37:04.881] ZENInv - Status Reporting:
> > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "-�O
> j,
> > "-�� l, "Tw� �s, "Ty� �T, "T�� j, "T�-
> > l, "�� �s, "� �T, "�6� j, "�9Y l}
> > [12/2/04 12:37:04.898] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:04.912] ZENInv - Status Reporting: Number of records to add
> > are: 1 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
> > [12/2/04 12:37:04.951] ZENInv - Status Reporting: getAttributesofDN:
> > Attributes of:
> > [12/2/04 12:37:04.984] ZENInv - Status Reporting:
> > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "-�O
> j,
> > "-�� l, "Tw� �s, "Ty� �T, "T�� j, "T�-
> > l, "�� �s, "� �T, "�6� j, "�9Y l}
> > [12/2/04 12:37:04.990] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:04.991] ZENInv - Status Reporting: Adding record 0 for
> > DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
> > [12/2/04 12:37:05.113] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:05.209] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:05.246] ZENInv - Status Reporting: getAttributesofDN:
> > Attributes of:
> > [12/2/04 12:37:05.277] ZENInv - Status Reporting:
> > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "-��
> l,
> > "Tw� �s, "Ty� �T, "T�� j, "T�- l, "��
> > �s, "� �T, "�6� j, "�9Y l, "�~; �s}
> > [12/2/04 12:37:05.284] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:05.285] ZENInv - Status Reporting: Number of modified
> records
> > are: 0 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
> > [12/2/04 12:37:05.286] ZenInv - Upgrade Service: Upgrade to ZfD4.0 or
> ZFS3.0
> > SP1 failed. Reinstall ZFD4.0 or ZFS3.0 SP1 and start the inventory server
> > again
> > [12/2/04 12:37:05.288] ZENInv - Status Reporting: Messages are written
> into
> > XML file for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
> > [12/2/04 12:37:05.326] ZENInv - Status Reporting: getAttributesofDN:
> > Attributes of:
> > [12/2/04 12:37:05.358] ZENInv - Status Reporting:
> > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "-��
> l,
> > "Tw� �s, "Ty� �T, "T�� j, "T�- l, "��
> > �s, "� �T, "�6� j, "�9Y l, "�~; �s}
> > [12/2/04 12:37:05.364] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:05.365] ZENInv - Status Reporting: Number of records to add
> > are: 1 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
> > [12/2/04 12:37:05.403] ZENInv - Status Reporting: getAttributesofDN:
> > Attributes of:
> > [12/2/04 12:37:05.435] ZENInv - Status Reporting:
> > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "-��
> l,
> > "Tw� �s, "Ty� �T, "T�� j, "T�- l, "��
> > �s, "� �T, "�6� j, "�9Y l, "�~; �s}
> > [12/2/04 12:37:05.441] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:05.445] ZENInv - Status Reporting: Adding record 0 for
> > DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
> > [12/2/04 12:37:05.568] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:05.670] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:05.707] ZENInv - Status Reporting: getAttributesofDN:
> > Attributes of:
> > [12/2/04 12:37:05.738] ZENInv - Status Reporting:
> > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "Tw�
> �s,
> > "Ty� �T, "T�� j, "T�- l, "�� �s, "�
> > �T, "�6� j, "�9Y l, "�~; �s, "�s? �T}
> > [12/2/04 12:37:05.747] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:05.748] ZENInv - Status Reporting: Number of modified
> records
> > are: 0 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
> > [12/2/04 12:37:05.767] ZenInv - Upgrade Service: [EnumModifier]
> > modifyEnumTables, Running EnumModifier in integrated mode with
> > upgradeService
> > [12/2/04 12:37:05.767] ZenInv - Upgrade Service: [EnumModifier]
> > modifyEnumTables, dbDriver:com.sybase.jdbc.SybDriver
> > [12/2/04 12:37:05.767] ZenInv - Upgrade Service: [EnumModifier]
> > modifyEnumTables,
> >
> dbURL:jdbc:sybase:Tds:11.32.25.98:2638?ServiceName =mgmtdb&JCONNECT_VERSION=4
> > [12/2/04 12:37:05.768] ZenInv - Upgrade Service: [EnumModifier]
> > modifyEnumTables, dbType:0
> > [12/2/04 12:37:05.768] ZenInv - Upgrade Service: [EnumModifier]
> > modifyEnumTables, dbUser:MW_DBA
> > [12/2/04 12:37:05.768] ZenInv - Upgrade Service: [EnumModifier]
> > modifyEnumTables, dbPasswd:novell
> > [12/2/04 12:37:06.844] Service Manager: start(ServiceDataAccessor,
> String[])
> > not found in
> > 'com.novell.zenworks.desktop.inventory.selector.Se lectorServiceInit'
> > [12/2/04 12:37:07.046] ZENInv - Selector: Selector Services Started
> > Successfully
> > [12/2/04 12:37:07.046] Service Manager: start(ServiceDataAccessor,
> String[])
> > not found in
> > 'com.novell.zenworks.desktop.inventory.storer.Stor erServiceInit'
> > [12/2/04 12:37:07.062] ZENInv - Selector: Selector Code Profiling disabled
> > [12/2/04 12:37:07.067] ZENInv - Storer: Start with
> > 'ServiceStatusChangeListener' invoked
> > [12/2/04 12:37:17.010] ZENInv - Selector: Getting ServerConfig HashTable
> > [12/2/04 12:37:17.010] ZENInv - Selector: Getting InvServiceObj from
> > HashTable
> > [12/2/04 12:37:17.011] ZENInv - Selector: Getting NDSTree from
> ServiceObject
> > [12/2/04 12:37:17.013] ZENInv - Selector: NDSTree=null
> > [12/2/04 12:37:17.014] ZENInv - Selector: Getting InventoryServiceDN from
> > ServiceObject
> > [12/2/04 12:37:17.014] ZENInv - Selector:
> > InventoryServiceDN=CN=SERVER1_ZenInvService.OU=BMO .OU=UK.O=OURTREE
> > [12/2/04 12:37:17.014] ZENInv - Selector: Getting ScanDir from
> ServiceObject
> > [12/2/04 12:37:17.015] ZENInv - Selector: ScanDir=DATA:\Zenworks\ScanDir
> > [12/2/04 12:37:17.021] ZENInv - Selector: NEW SyncServiceTable Constructor
> > Invoked
> > [12/2/04 12:37:17.022] ZENInv - Selector: Creating-Verifying
> > Serialize-Deserialize Location DATA:\Zenworks\ScanDir\stable\
> > [12/2/04 12:37:17.022] ZENInv - Selector: Checking for
> > DATA:\Zenworks\ScanDir\stable\
> > [12/2/04 12:37:17.023] ZENInv - Selector: synchTableDir exists. Check
> wether
> > this is a directory or File
> > [12/2/04 12:37:17.024] ZENInv - Storer: Storer from dblocation user:
> MW_DBA
> > driver: com.sybase.jdbc.SybDriver protocol: jdbc:sybase: subname: Tds:
> port:
> > 2638
> > [12/2/04 12:37:17.024] ZENInv - Selector: Directory
> > ExistsDATA:\Zenworks\ScanDir\stable\
> > [12/2/04 12:37:17.024] ZENInv - Selector: Directory Existence
> > ConfirmedDATA:\Zenworks\ScanDir\stable\
> > [12/2/04 12:37:17.025] ZENInv - Selector: Serialize-Deserialize File
> > DATA:\Zenworks\ScanDir\stable\STABLE.SER
> > [12/2/04 12:37:17.025] ZENInv - Selector: Initializing SyncServiceTable
> > [12/2/04 12:37:17.025] ZENInv - Selector: SynchTable Does not Exist
> > [12/2/04 12:37:17.026] ZENInv - Selector: Attempting to Load SynchTable
> From
> > Serialized File
> > [12/2/04 12:37:17.026] ZENInv - Selector: DeSerializing hashTable
> > FromDATA:\Zenworks\ScanDir\stable\STABLE.SER
> > [12/2/04 12:37:17.029] ZENInv - Storer: url[From DBObject]:
> > jdbc:sybase:Tds:11.32.25.98:2638?ServiceName=mgmtd b&JCONNECT_VERSION=4
> > [12/2/04 12:37:17.035] ZENInv - Storer: wsdn:
> > CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREEi = 0
> > [12/2/04 12:37:17.037] ZENInv - Selector: DeSerializing SyncService
> > HashTable
> > [12/2/04 12:37:17.041] ZENInv - Selector: SynchTable Loaded Sucessfully
> From
> > Serialized File
> > [12/2/04 12:37:17.042] ZENInv - Selector: Getting hasDatabase status from
> > ServiceObject
> > [12/2/04 12:37:17.042] ZENInv - Selector: hasDatabase is true from
> > ServiceObject
> > [12/2/04 12:37:17.042] ZENInv - Selector: Getting isStandAlone status from
> > ServiceObject
> > [12/2/04 12:37:17.043] ZENInv - Selector: isStandAlone is true from
> > ServiceObject
> > [12/2/04 12:37:17.043] ZENInv - Selector: ConvDir
> > DATA:\Zenworks\ScanDir\conv\
> > [12/2/04 12:37:17.044] ZENInv - Selector: ConvDir exists. Check wether
> this
> > is a directory or File
> > [12/2/04 12:37:17.044] ZENInv - Selector: DATA:\Zenworks\ScanDir
> > [12/2/04 12:37:17.045] ZENInv - Selector: DATA:\Zenworks\ScanDir\DbDir
> > [12/2/04 12:37:17.045] ZENInv - Selector:
> > [12/2/04 12:37:17.048] ZENInv - Selector: Getting SELECTOR_STORER Synch
> > Object
> > [12/2/04 12:37:17.049] ZENInv - Selector: Getting SELECTOR_COLLECTOR Synch
> > Object
> > [12/2/04 12:37:17.049] ZENInv - Selector: Getting SELECTOR_CONVERTER Synch
> > Object
> > [12/2/04 12:37:17.049] ZENInv - Selector: Getting CONVERTER_SELECTOR Synch
> > Object
> > [12/2/04 12:37:17.050] ZENInv - Selector: Getting SYNCHSERVICE_SELECTOR
> > Synch Object
> > [12/2/04 12:37:17.061] ZENInv - Storer: Loading Storer test properties
> file
> > [12/2/04 12:37:17.080] Service Manager: start(ServiceDataAccessor,
> String[])
> > not found in
> > 'com.novell.zenworks.common.inventory.scancollecto r.ScanCollector'
> > [12/2/04 12:37:17.338] ZENInv - IFS Server: zenInvScanCollector:
> > FileServiceController: Startup Properties: {chunksize=4096,
> >
> lockfactory=com.novell.zenworks.common.inventory.i fs.utils.MemoryFileLockFac
> > tory, lockseed=ScanSelectorLock, transfers=100,
> > rootdirectory=DATA:\Zenworks\ScanDir, timeout=60000,
> > servicename=zenInvScanCollector, portnumber=0}
> > [12/2/04 12:37:17.499] Service Manager: start(ServiceDataAccessor,
> String[])
> > not found in
> >
> 'com.novell.zenworks.desktop.inventory.InvSyncServ ice.ManagableSyncService'
> > [12/2/04 12:37:17.579] ZENInv - Inventory Sync Service: SyncService thread
> > started
> > [12/2/04 12:37:17.579] ZENInv - Inventory Sync Service: NEW
> SyncServiceTable
> > Constructor Invoked
> > [12/2/04 12:37:17.580] ZENInv - Inventory Sync Service: Creating-Verifying
> > Serialize-Deserialize Location DATA:\Zenworks\ScanDir\stable\
> > [12/2/04 12:37:17.580] ZENInv - Inventory Sync Service: Checking for
> > DATA:\Zenworks\ScanDir\stable\
> > [12/2/04 12:37:17.585] ZENInv - Inventory Sync Service: synchTableDir
> > exists. Check wether this is a directory or File
> > [12/2/04 12:37:17.585] ZENInv - Inventory Sync Service: Directory
> > ExistsDATA:\Zenworks\ScanDir\stable\
> > [12/2/04 12:37:17.586] ZENInv - Inventory Sync Service: Directory
> Existence
> > ConfirmedDATA:\Zenworks\ScanDir\stable\
> > [12/2/04 12:37:17.586] ZENInv - Inventory Sync Service:
> > Serialize-Deserialize File DATA:\Zenworks\ScanDir\stable\STABLE.SER
> > [12/2/04 12:37:17.587] ZENInv - Inventory Sync Service: Initializing
> > SyncServiceTable
> > [12/2/04 12:37:17.587] ZENInv - Inventory Sync Service: Will Use the
> > existing SyncServiceTable
> > [12/2/04 12:37:18.445] ZENInv - Status Reporting: Messages are written
> into
> > XML file for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
> > [12/2/04 12:37:18.484] ZENInv - Status Reporting: getAttributesofDN:
> > Attributes of:
> > [12/2/04 12:37:18.520] ZENInv - Status Reporting:
> > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "Tw�
> �s,
> > "Ty� �T, "T�� j, "T�- l, "�� �s, "�
> > �T, "�6� j, "�9Y l, "�~; �s, "�s? �T}
> > [12/2/04 12:37:18.525] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:18.526] ZENInv - Status Reporting: Number of records to add
> > are: 1 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
> > [12/2/04 12:37:18.564] ZENInv - Status Reporting: getAttributesofDN:
> > Attributes of:
> > [12/2/04 12:37:18.595] ZENInv - Status Reporting:
> > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "Tw�
> �s,
> > "Ty� �T, "T�� j, "T�- l, "�� �s, "�
> > �T, "�6� j, "�9Y l, "�~; �s, "�s? �T}
> > [12/2/04 12:37:18.600] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:18.601] ZENInv - Status Reporting: Adding record 0 for
> > DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
> > [12/2/04 12:37:18.699] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> > [12/2/04 12:37:18.783] ZENInv - Status Reporting: Logout from NDS
> > returnedtrue
> >
> > Migration Log
> > ***********
> > Starting the AlterProcedure Log at 2004-12-02 11:45:29.731
> > Unzipping the file migrate.zip
> > Transforming the Migration SQL files...
> > ..3
> > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Initial_0
> > is copied
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
> > nPotsModem_1 is done with 545 0x03010c0a010202
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
> > nOperatingSystem_2 is done with 143 0x03010e02
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
> > nNetworkAdapter_3 is done with 544 0x03010c0b04
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
> > nDiskDrive_4 is done with 543 0x03010c080301
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Wi
> > nOperatingSystem_5 is done with 547 0x03010e0201
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\zenworks_vi
> > deoadapter_6 is done with 53 0x03010c030c0201
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Sy
> > stemInfo_7 is done with 228 0x03020404
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_so
> > undadapter_8 is done with 546 0x03010c16
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Mo
> > therboard_9 is done with 221 0x0302040101
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Lo
> > gicalDiskDrive_10 is done with 113 0x03010c110402
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_in
> > ventoryscanner_11 is done with 181 0x03011402
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_in
> > stalleddriver_12 is done with 548 0x2701
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_In
> > stalledDirectory_13 is done with 551 0x4a
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_bu
> > s_14 is done with 35 0x03010c0301
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_bi
> > os_15 is done with 180 0x0301140101
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\ManageWise_
> > CurrentLoginUser_16 is done with 549 0x48
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\ManageWise_
> > LastLoginUser_17 is done with 550 0x49
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\ManageWise_
> > User_18 is done with 205 0x03011a
> > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\misc_19
> is
> > copied
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybcustom_2
> > 0 is copied
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybdelprocs
> > _21 is copied
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybextended
> > _22 is copied
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybrmaudit_
> > 23 is copied
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\CIM_Process
> > or_24 is copied
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ne
> > twareOperatingSystem_24 is done with 142 0x03010e01
> >
> \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\indytoprom_
> > 26 is copied
> > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Post_30
> is
> > copied
> > Starting Schema Migration
> > Adding the extra db spaces...
> > SELECT file_name FROM SYSFILE WHERE dbspace_name LIKE '%CIM9%'
> > has the results
> > File_NAME=mgmtdb9.db
> > dbfile's base directory =
> > SELECT file_name FROM SYSFILE WHERE dbspace_name LIKE '%CIM10%'
> > CREATE DBSPACE CIM10 AS 'mgmtdb10.db'
> > Totaltime taken for Schema Migration : 149
> > Migration Exception Message->Could not add the dbspace..ASA Error -121:
> > Permission denied: unable to create the dbspace file "CIM10",
> > SQLState->42501, ErrorCode->262
> >
> >
>
> -
When I go to Central Admin > Upgrade and Migration > Manage Databases Upgrade Status, I have 2 content databases which have the status:
Database is up to date, but some sites are not completely upgraded.
How can I determine which sites are not completely upgraded?Manage Databases Upgrade Status will provide you all active and offline DB details, you can get same result
using below PowerShell cmdlet.
Get-SPDatabase and Get-SPContentDatabase will provide all active database/Content DB in Farm which include Service application db, central admin DB.
Get-SPDatabase | Format-Table Name, ID
Coming back to your question, if you find that there are some site are not completely upgraded then run below command and understand the cause if issue on specific DB.
Test-SPContentDatabase WSS_ContentDB_Name
If you find any missing file issue in DB then resolve these issue to upgrade content database.
(verify all customizations referenced within the content database are also installed in the web application. This cmdlet can be issued
against a content database currently attached to the farm, or a content database that is not connected to the farm )
Use the Upgrade-SPContentDatabase cmdlet
to resume a failed database upgrade or begin a build-to-build database upgrade against a SharePoint content database
Upgrade-SPContentDatabase WSS_Content
reference:
http://technet.microsoft.com/en-us/library/ff607813(v=office.15).aspx
http://technet.microsoft.com/en-us/library/ff607941(v=office.15).aspx
If my contribution helps you, please click Mark As Answer on that post and
Vote as Helpful
Thanks, ShankarSingh(MCP) -
Server Calendar migration failed
Hi,
last week when installing the latest server update for Mavericks the Calendar and Contacts stopped working. I tried everything to get it working again for the past few days like reinstalling server and even updated to Yosemite and installed Server 4 with the hope it would migrate correctly but without any luck.
The calendar state keeps in Starting and will never change to Started.
Below you can find the migration.log:
calendarcommonextra: Jan 21 21:49:45 Clean install: False
calendarcommonextra: Jan 21 21:49:45 Legacy indicator file does not exist
calendarcommonextra: Jan 21 21:49:46 Default certificate is: /etc/certificates/MYSERVER.FC3592DE1A30B14C74BE9CAFCBACFCC57615842C.cert.pem
calendarcommonextra: Jan 21 21:49:46 Default cert path: /etc/certificates/MYSERVER.FC3592DE1A30B14C74BE9CAFCBACFCC57615842C.cert.pem
calendarcommonextra: Jan 21 21:49:46 Reading plist /Library/Server/Calendar and Contacts/Config/caldavd-system.plist
calendarcommonextra: Jan 21 21:49:46 EnableCalDAV=True
calendarcommonextra: Jan 21 21:49:46 EnableCardDAV=True
calendarcommonextra: Jan 21 21:49:46 Looking up DatabaseRoot
calendarcommonextra: Jan 21 21:49:51 Output from calendarserver_config: DatabaseRoot=/Library/Server/Calendar and Contacts/Data/Database.xpg
calendarcommonextra: Jan 21 21:49:51 Looking up Postgres.ClusterName
calendarcommonextra: Jan 21 21:49:52 Output from calendarserver_config: Postgres.ClusterName=cluster.pg
calendarcommonextra: Jan 21 21:49:52 Sending to serveradmin: calendar:command = exportPushCertificates
calendarcommonextra: Jan 21 21:49:55 Output from push certificate export: calendar:Exported = "Yes"
calendarcommonextra: Jan 21 21:49:55 Calling calendarserver_upgrade --postprocess
calendarcommonextra: Jan 21 21:50:01 Output from calendarserver_upgrade: 2015-01-21 21:49:59+0100 Root ACL: <?xml version='1.0' encoding='UTF-8'?>
<acl xmlns='DAV:'>
<ace>
<principal>
<authenticated/>
</principal>
<grant>
<privilege>
<read/>
</privilege>
<privilege>
<read-current-user-privilege-set/>
</privilege>
</grant>
<protected/>
</ace>
</acl>
2015-01-21 21:49:59+0100 Nav ACL: <?xml version='1.0' encoding='UTF-8'?>
<acl xmlns='DAV:'>
<ace>
<principal>
<authenticated/>
</principal>
<grant>
<privilege>
<read/>
</privilege>
<privilege>
<read-current-user-privilege-set/>
</privilege>
</grant>
<protected/>
</ace>
</acl>
2015-01-21 21:49:59+0100 CalDAV APNS certificate passphrase retreived from keychain
2015-01-21 21:49:59+0100 CardDAV APNS certificate passphrase retreived from keychain
2015-01-21 21:49:59+0100 iMIP Sending password successfully retreived from keychain
2015-01-21 21:49:59+0100 iMIP Receiving password successfully retreived from keychain
2015-01-21 21:49:59+0100 Root ACL: <?xml version='1.0' encoding='UTF-8'?>
<acl xmlns='DAV:'>
<ace>
<principal>
<authenticated/>
</principal>
<grant>
<privilege>
<read/>
</privilege>
<privilege>
<read-current-user-privilege-set/>
</privilege>
</grant>
<protected/>
</ace>
</acl>
2015-01-21 21:49:59+0100 Nav ACL: <?xml version='1.0' encoding='UTF-8'?>
<acl xmlns='DAV:'>
<ace>
<principal>
<authenticated/>
</principal>
<grant>
<privilege>
<read/>
</privilege>
<privilege>
<read-current-user-privilege-set/>
</privilege>
</grant>
<protected/>
</ace>
</acl>
2015-01-21 21:49:59+0100 iMIP Sending password successfully retreived from keychain
2015-01-21 21:49:59+0100 iMIP Receiving password successfully retreived from keychain
2015-01-21 21:49:59+0100 Root ACL: <?xml version='1.0' encoding='UTF-8'?>
<acl xmlns='DAV:'>
<ace>
<principal>
<authenticated/>
</principal>
<grant>
<privilege>
<read/>
</privilege>
<privilege>
<read-current-user-privilege-set/>
</privilege>
</grant>
<protected/>
</ace>
</acl>
2015-01-21 21:49:59+0100 Nav ACL: <?xml version='1.0' encoding='UTF-8'?>
<acl xmlns='DAV:'>
<ace>
<principal>
<authenticated/>
</principal>
<grant>
<privilege>
<read/>
</privilege>
<privilege>
<read-current-user-privilege-set/>
</privilege>
</grant>
<protected/>
</ace>
</acl>
2015-01-21 21:49:59+0100 iMIP Sending password successfully retreived from keychain
2015-01-21 21:49:59+0100 iMIP Receiving password successfully retreived from keychain
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.application.app
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.internet.protocol
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.mail.smtp
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.internet.base
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.web.client
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.persisted.sob
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.names.client
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.protocols.basic
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.application.internet
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.web.html
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.protocols.amp
2015-01-21 21:49:59+0100 Replacing Twisted log.msg object twistedLogMessage in twext.python.log
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.python.threadpool
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.web._newclient
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.cred.checkers
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.persisted.styles
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.internet.tcp
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twext.internet.adaptendpoint
2015-01-21 21:49:59+0100 Replacing Twisted log.err object err in txweb2.dav.xattrprops
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.internet.udp
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.mail.pop3client
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.internet.task
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.internet.endpoints
2015-01-21 21:49:59+0100 Replacing Twisted log.err object err in twisted.internet._baseprocess
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.names.dns
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twext.internet.spawnsvc
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twext.enterprise.adbapi2
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.web.http
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.internet.selectreactor
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.internet.posixbase
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.protocols.policies
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.plugin
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.internet.defer
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.internet._posixstdio
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.web.template
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.protocols.tls
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.protocols.memcache
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.enterprise.adbapi
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.internet.process
2015-01-21 21:49:59+0100 Calendar and Contacts Server 6.0-unknown starting Utility process...
2015-01-21 21:49:59+0100 Creating /var/run/caldavd/PostgresSocket
2015-01-21 21:49:59+0100 Cluster already exists at /Library/Server/Calendar and Contacts/Data/Database.xpg/cluster.pg
2015-01-21 21:49:59+0100 Requesting postgres start via /Applications/Server.app/Contents/ServerRoot/usr/bin/xpg_ctl ["-c listen_addresses=''", '-k /var/run/caldavd/PostgresSocket', '-c shared_buffers=165', '-c max_connections=110', '-c standard_conforming_strings=on', '-c unix_socket_permissions=0770', '-c log_lock_waits=TRUE', '-c deadlock_timeout=10', "-c log_line_prefix='%m [%p] '", "-c log_directory='/Library/Server/Calendar and Contacts/Logs'", '-c log_truncate_on_rotation=on', '-c log_filename=postgresql_%w.log', '-c log_rotation_age=1440', '-c logging_collector=on']
2015-01-21 21:50:00+0100 received postgres stdout "2015-01-21 21:50:00 XPG.2178: Spawning... ('/usr/bin/tar', '-xz', '-f', '/Library/Server/Calendar and Contacts/Data/Database.xpg/backup/base_backup/base_complete.tar.gz', '-C', '/Library/Server/Calendar and Contacts/Data/Database.xpg/cluster.pg')\n"
2015-01-21 21:50:00+0100 received postgres stdout '2015-01-21 21:50:00 XPG.2178: Preparing to upgrade outdated database cluster.\n'
2015-01-21 21:50:00+0100 received postgres stderr Traceback (most recent call last):
File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/internet/defer.py", line 423, in errback
2015-01-21 21:50:00+0100 received postgres stderr self._startRunCallbacks(fail)
File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/internet/defer.py", line 490, in _startRunCallbacks
self._runCallbacks()
File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/internet/defer.py", line 577, in _runCallbacks
2015-01-21 21:50:00+0100 received postgres stderr current.result = callback(current.result, *args, **kw)
File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/internet/defer.py", line 1155, in gotResult
_inlineCallbacks(r, g, deferred)
--- <exception caught here> ---
File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/internet/defer.py", line 1097, in _inlineCallbacks
result = result.throwExceptionIntoGenerator(g)
File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/python/failure.py", line 389, in throwExceptionIntoGenerator
2015-01-21 21:50:00+0100 received postgres stderr return g.throw(self.type, self.value, self.tb)
File "/Applications/Server.app/Contents/ServerRoot/usr/bin/xpg_ctl", line 2038, in main
2015-01-21 21:50:00+0100 received postgres stderr result = yield xpg.do_everything(argv, environ)
File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/internet/defer.py", line 1097, in _inlineCallbacks
result = result.throwExceptionIntoGenerator(g)
2015-01-21 21:50:00+0100 received postgres stderr File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/python/failure.py", line 389, in throwExceptionIntoGenerator
return g.throw(self.type, self.value, self.tb)
File "/Applications/Server.app/Contents/ServerRoot/usr/bin/xpg_ctl", line 1994, in do_everything
result = yield self.command_object.execute()
File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/internet/defer.py", line 1097, in _inlineCallbacks
result = result.throwExceptionIntoGenerator(g)
File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/python/failure.py", line 389, in throwExceptionIntoGenerator
return g.throw(self.type, self.value, self.tb)
File "/Applications/Server.app/Contents/ServerRoot/usr/bin/xpg_ctl", line 1726, in execute
yield xpg.do_restore()
File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/internet/defer.py", line 1099, in _inlineCallbacks
result = g.send(result)
File "/Applications/Server.app/Contents/ServerRoot/usr/bin/xpg_ctl", line 1028, in do_restore
did_upgrade = self.upgrade_cluster_if_needed()
File "/Applications/Server.app/Contents/ServerRoot/usr/bin/xpg_ctl", line 1452, in upgrade_cluster_if_needed
2015-01-21 21:50:00+0100 received postgres stderr os.rename(self.data_directory, orig_data_dir)
exceptions.OSError: [Errno 66] Directory not empty
2015-01-21 21:50:00+0100 postgres process ended with status 256
2015-01-21 21:50:00+0100 Could not start postgres; see postgres.log
2015-01-21 21:50:01+0100 Can't start or connect to postgres
Failed to start service.
2015-01-21 21:50:01+0100 Main loop terminated.
calendarcommonextra: Jan 21 21:50:01 Executing: /Applications/Server.app/Contents/ServerRoot/usr/sbin/serverctl enable service=org.calendarserver.agent
calendarcommonextra: Jan 21 21:50:01 Output: {
calendarcommonextra: Jan 21 21:50:01 Executing: /Applications/Server.app/Contents/ServerRoot/usr/sbin/serverctl enable service=org.calendarserver.relocate
calendarcommonextra: Jan 21 21:50:01 Output: {
calendarcommonextra: Jan 21 21:50:01 Executing: /bin/launchctl start org.calendarserver.agent
calendarcommonextra: Jan 21 21:50:01 Executing: /Applications/Server.app/Contents/ServerRoot/usr/libexec/calendarserver_log_con f
calendarcommonextra: Jan 21 21:50:01 Allowing supervisor to enable service
calendarcommonextra: Jan 21 21:50:01 Configuring reverse proxies
Also in the servermgr_calendar.log I see this message repeating:
[cal] 1/21/15, 9:52:46 PM GMT+1 : Command getState duration 20.40 seconds
[cal] 1/21/15, 9:52:46 PM GMT+1 : getState releasing request lock
[cal] 1/21/15, 9:52:46 PM GMT+1 : Command getState received
[cal] 1/21/15, 9:52:46 PM GMT+1 : getState attempting to acquire request lock...
[cal] 1/21/15, 9:52:46 PM GMT+1 : getState acquired request lock
[cal] 1/21/15, 9:52:46 PM GMT+1 : getState begin
[cal] 1/21/15, 9:52:46 PM GMT+1 : Read Settings
[cal] 1/21/15, 9:52:46 PM GMT+1 : calendarServerOperationWithRequest
[cal] 1/21/15, 9:52:46 PM GMT+1 : Calling agent...
[cal] 1/21/15, 9:53:02 PM GMT+1 : Agent failure: The request timed out.
[cal] 1/21/15, 9:53:02 PM GMT+1 : Agent returned...
error = "The request timed out.";
Thanks for the help.
Best regards
Robfor testing purposes I renamed the data folder and started the calendar service again.
The new data folder got created but the loop like below is still showing up every 10 seconds:
[cal] 1/21/15, 9:52:46 PM GMT+1 : Command getState duration 20.40 seconds
[cal] 1/21/15, 9:52:46 PM GMT+1 : getState releasing request lock
[cal] 1/21/15, 9:52:46 PM GMT+1 : Command getState received
[cal] 1/21/15, 9:52:46 PM GMT+1 : getState attempting to acquire request lock...
[cal] 1/21/15, 9:52:46 PM GMT+1 : getState acquired request lock
[cal] 1/21/15, 9:52:46 PM GMT+1 : getState begin
[cal] 1/21/15, 9:52:46 PM GMT+1 : Read Settings
[cal] 1/21/15, 9:52:46 PM GMT+1 : calendarServerOperationWithRequest
[cal] 1/21/15, 9:52:46 PM GMT+1 : Calling agent...
[cal] 1/21/15, 9:53:02 PM GMT+1 : Agent failure: The request timed out.
[cal] 1/21/15, 9:53:02 PM GMT+1 : Agent returned...
error = "The request timed out."; -
Stuck in a loop (wont upgrade services successfully)
After Snow Leopard server is installed, I entered in the serial number, and it tells me it's "Setting Up ... Your server is being configured."
In the bottom left hand corner it tells me its "Migrating OD" etc. then that its "Upgrading services"
After a seemingly long wait it eventually tells me -
"An error occurred while configuring your server."
"The following actions failed or were not attempted:"
The list includes the locale, configuring just about every server defaults (Web, iCal, etc.), and "Setting up server"
Then it misleads me by saying "Your server needs to be restarted to complete setup." Which only leads to the whole process, and same errors happening all over again.
Any ideas or help would be appreciated.I encountered something similar during one of my upgrade sequences a while back, and (like Nate Taylor) worked around it by using the Disk Utility clone I had made of the disk prior to the upgrade as an server data import source. I blanked the system disk, installed, and selected a configuration import from that disk. And yes, the problem and the symptoms and associated diagnostics were reported to Apple.
-
Failed to open service OracleDEV102TNSListener , error 1060
Dear Consultants,
I have been trying to install ECC6 , Oracle on Windows 2003, and my Hardware is RAM --2 GB
HDD -- 300GB
I am having intel duo core processor and iam using Gigabyte motherboard,Intel chipset.
My Installations stops at Import_Abap phase, following are the logs ,
<b>ERROR 2007-03-10 04:47:46
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2007-03-10 04:47:47
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
INFO 2007-03-10 05:03:18
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor</b>".
I have set the all the Environment variables , i run r3trans -d and the result is
<b>C:\Documents and Settings\devadm>r3trans -d
This is r3trans version 6.13 (release 700 - 20.02.06 - 16:15:00).
unicode enabled version
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
r3trans finished (0012).</b>
<b>I also run r3trans -x and the result is.
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12541'
4 ETW000 21 1.098448
4 ETW000 [dev trc ,00000] Try to connect with default password 142 1.098590
4 ETW000 [dev trc ,00000] Connecting as SAPSR3/<pwd>@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
4 ETW000 22 1.098612
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 23 1.098635
4 ETW000 [dev trc ,00000] 0 UTF8 1 0244CF08 0245243C 02451CC4
4 ETW000 24 1.098659
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=0,svrhp=02463484) 14 1.098673
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=02451C10,srvhp=02463484)
4 ETW000 19 1.098692
4 ETW000 [dev trc ,00000] Deallocating server context handle 02463484 16 1.098708
4 ETW000 [dev trc ,00000] Allocating server context handle 15 1.098723
4 ETW000 [dev trc ,00000] Attaching to DB Server DEV (con_hdl=0,svchp=02451C10,svrhp=02463484)
4 ETW000 29 1.098752
4 ETW000 [dev trc ,00000] Tue Mar 13 04:38:09 2007 1093335 2.192087
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
4 ETW000 19 2.192106
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12541'
4 ETW000 19 2.192125
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 12541 performing CON [dblink#3 @ 431]
4 ETW000 176 2.192301
4 ETW000 [dblink ,00431] ***LOG BY0=>ORA-12541: TNS:no listener [dblink#3 @ 431]
4 ETW000 19 2.192320
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'DEV'"</b>
Event Viewer result is
<b>----
Faulting application isqlplussvc.exe, version 1.0.7.0, faulting module msvcrt.dll, version 7.0.3790.0, fault address 0x0003113b.</b>
finally in SAPINST logs i could see
<b>
Starting tnslsnr: please wait...
Failed to open service <OracleDEV102TNSListener>, error 1060.
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is C:\oracle\DEV\102\network\admin\listener.ora
Log messages written to C:\oracle\DEV\102\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEV.WORLDipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEVipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DEV)(PORT=1527)))
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=DEV.WORLD))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
Start Date 10-MAR-2007 01:29:29
Uptime 0 days 0 hr. 0 min. 3 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\oracle\DEV\102\network\admin\listener.ora
Listener Log File C:\oracle\DEV\102\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEV.WORLDipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEVipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DEV)(PORT=1527)))
Services Summary...
Service "DEV" has 1 instance(s).
Instance "DEV", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully</b>
Please suggest for the possible workaround, as you can see i have tried everything.
Regards,Dear Umesh,
I have triggered the Installation again, still the problem remains unresolved,
PLEASE CONFIRM THAT I AM USING INTEL CORE DUO PROCESSOR , does it have any dependcies or prerequisites.
pasting the last few lines of logs of SAPAPPL1_15, where i got the error in ABAP IMPORT.
DbSl Trace: ORA-4031 occurred when executing SQL statement (parse error offset=0)
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "VDBEPI_EU~0" ON "VDBEPI_EU" ( "MANDT", "BUKRS", "RBELKPFD", "RPOSNR" ) TABLESPACE PSAPSR3 STORAGE (INITIAL 16384 NEXT 0000002560K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 4031)
error message returned by DbSl:
ORA-04031: unable to allocate 40 bytes of shared memory ("shared pool","CREATE UNIQUE INDEX "VDBEPI_...","Typecheck","qcsqlpath: qcsAddSqlPath")
(DB) INFO: disconnected from DB
E:\usr\sap\NAJ\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
E:\usr\sap\NAJ\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20070517090126
===================================================
IMPORT_MONITOR.JAVA logs.
Import Monitor jobs: running 2, waiting 35, completed 34, failed 1, total 72.
Loading of 'SAPAPPL1_15' import package: ERROR
Import Monitor jobs: running 1, waiting 35, completed 34, failed 2, total 72.
Loading of 'SAPAPPL2_5' import package: ERROR
Import Monitor jobs: running 0, waiting 35, completed 34, failed 3, total 72.
Import Monitor jobs: running 1, waiting 34, completed 34, failed 3, total 72.
Import Monitor jobs: running 2, waiting 33, completed 34, failed 3, total 72.
Import Monitor jobs: running 3, waiting 32, completed 34, failed 3, total 72.
Loading of 'D021T' import package: OK
Import Monitor jobs: running 2, waiting 32, completed 35, failed 3, total 72.
Import Monitor jobs: running 3, waiting 31, completed 35, failed 3, total 72.
Loading of 'SAPAPPL1_12' import package: OK
Import Monitor jobs: running 2, waiting 31, completed 36, failed 3, total 72.
Import Monitor jobs: running 3, waiting 30, completed 36, failed 3, total 72.
Loading of 'SAPSSEXC_4' import package: OK
Import Monitor jobs: running 2, waiting 30, completed 37, failed 3, total 72.
Import Monitor jobs: running 3, waiting 29, completed 37, failed 3, total 72.
Loading of 'SAPSSEXC_6' import package: OK
Import Monitor jobs: running 2, waiting 29, completed 38, failed 3, total 72.
Regards, -
ITunes Match and failing to upgrade some of my tracks
Does anyone know why ITunes Match sometimes fails to upgrade certain popular tracks to 256 AAC when it's established that the song/track exists in the Itune store? I just completed the reorganization of my ITunes library today after using iTunes Match to upgrade the compression quality of my songs. And out of approximately 1100 songs, iTunes Match failed to upgrade the compression quality on about a 100 of these tracks. It's not a big deal but I do find it very interesting with popular tracks. As just one example to make my point, Sheryl Crow's 1998 hit My Favorite Mistake was not converted from the current 128 kbps to 256. I could list a number of others that I see in the ITunes Store. And it doesn't make any sense. If the song is in the ITunes store, it should be making a match with the tracks in my library. All of my music meets the minimum compression quality to be eligible for upgrades to 256 AAC under the ITunes Match service. Any thoughts/feedback from anyone? Thanks.
Hi
Read this user tip Some User Tips (April 2015)
Jim -
Server 2012 r2 live migration fails with hardware error
Hello all, we just upgraded one of our hyper v hosts from server 2012 to server 2012 r2; previously we had live replication setup between it and another box on the network which was also running server 2012. After installing server 2012 r2 when a live migration
is attempted we get the message:
"The virtual machine cannot be moved to the destination computer. The hardware on the destination computer is not compatible with the hardware requirements of this virtual machine. Virtual machine migration failed at migration source."
The servers in question are both dell, currently we have a poweredge r910 running server 2012 and a poweredge r900 running server 2012 r2. The section under processor for "migrate to a physical computer using a different processor" is already checked
and this same vm was successfully being live replicated before the upgrade to server 2012 r2. What would have changed around hardware requirements?
We are migrating from server 2012 on the poweredge r910 to server 2012 r2 on the poweredge r900. Also When I say this was an upgrade, we did a full re install and wiped out the installation of server 2012 and installed server 2012 r2, this was not an upgrade
installation.The only cause I’ve seen so far is virtual switches being named differently. I do remember that one of our VMs didn’t move, but we simply bypassed this problem, using one-time backup (VeeamZIP, more specifically).
If it’s one-time operation you can use the same procedure for the VMs in question -> backup and restore them at new server.
Kind regards, Leonardo. -
ConnectionManager::invoke::Failed to find service connection url. I keep getting this error line I have just got my macbook pro back from repairs and a drive upgrade could this be the problem...?
Hey gasemp,
If you see that error I would sign out then sign back in to see if that resolves the issue:
Sign out
Choose Store > Sign Out.
Sign in using an Apple ID
Choose Store > Sign In, or click Sign In in the Quick Links section.
The Quick Links section is located in the right part of the window shown when you click Featured, Top Charts, or Categories in the toolbar.
Enter your Apple ID and password, and then click Sign In.
via:
Mac App Store: Sign in and out
http://support.apple.com/kb/PH11499
Sincerely,
David -
Failed to upgrade more than one table at same time
Hi
In Deployment Manager, I failed to upgrade more than one table at same time.
I tried to hightlight 4 tables and set the default action as Upgrade, and click File/Generate Deploy. It passed the code generation step then I click Deploy, they are all failed with no error message.
But they are all successful when I upgrade them one by one. Any one has any idea about this?
For the known reason, we have no choice to do the deployment with action of 'upgrade' through OMBPlus, instead, can only do that interactively through OWB Client. I can't imagine to ask our Production side DBA to upgrade 80 tables one by one. Or I have to use the generated scripts to do the upgrade, which will resulted in 'no deploy status updated' in OWB. Any help will be very appricated.
The version I'm using is OWB 10g.
Thanks,
DamingHi
First of all, Patrick's solution doesn't work for me. I didn't do cloning and there is no problem when check the WB tables.
Second, I think your solution is only good for the developing environment just to get tables upgrade via deployment manager. In most cases, when you do a new release on PROD environment you just exp/imp the MDL file from DEV to PROD and any developing is not recommended on PROD. But your approach is trying to manually the DB, and then EDIT the mapping to do the Reconcile and then deploy. Surely you can do that if you have full control on your PROD side. However, in my situation, I have no access to the PROD for the security reason and an DBA Operator of the Client is responsible to implement my Migration process on PROD by himself. -
Has anyone used Migration Assistant to move services from one system running Server to a new system?
So, I've purchased a Mac mini to replace my aging Mid 2009 mini on which I've been running Mavericks Server. In trying to answer the question of how best to move services from the old machine to the new, I've stumbled into the fact that Migration Assistant can apparently migrate not just user data for workstations and laptops, but also service data for servers. The problem is there isn't much detail in the docs about how good a job it does when going from one machine to another without changing OS releases. There's a very detailed document in the KB about going from older versions of Server to new (OS X Server: Upgrade and migration from Lion Server or Snow Leopard Server) and a general doc on migrating from another Mac under Mavericks (OS X: How to migrate data from another Mac using Mavericks) but that has no details about Server.
Has anyone used Migration Assistant to move services from one system running Server to a new system? Are there any details that are particularly important to get right? Are there things that require manual steps after Migration Assistant is done?
There are other ways I could tackle the problem, of course. I could simply swap drives between the systems, but the new system has two drives that are bigger, faster, and I intend to mirror them. That would complicate such an approach. I'd really like to keep the conversation constrained to a discussion of Migration Assistant as the primary method.yes. I migrated a server frm lion to mavericks following these notes a while back:
OS X Server: Upgrade and migration from Mountain Lion
i do not recall having any problems with it. -
Need to upgrade service providers of Moss 2007 to SharePoint 2013
I have upgraded the Moss 2007 Content database via native approach into SharePoint 2013. I am wondering how we can upgrade the service providers of Moss 2007 to SharePoint 2013 service applications.
Regards Restless SpiritHi Restless,
According to your description, my understanding is that you want to upgrade the service providers of MOSS 2007 to SharePoint 2013 service application.
Per my knowledge, you need to firstly upgrade the service providers of moss 2007 to SharePoint 2010 via database content, then upgrade SharePoint 2010 service applications to SharePoint 2013.
There are some useful articles for your reference:
MOSS 2007 upgrade - Shared-Services Provider SSP migration and my sites
MOSS SharePoint 2007 SSP migration to SharePoint 2010
Upgrade service applications to SharePoint 2013
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support -
Upgrade Service Applications a week prior to Content DB attach
Hi,
I ran a database attach upgrade from SP10 to SP13 in a test environment and now want to proceed with the production environment. In order to plan for the least possible downtime, I have the following questions:
Is it possible to upgrade Service Applications a week prior to the content databases?
Namely, I'm wondering about the Secure Store service app.
If the above is not desirable, would upgrading everything now (in 2010 mode) and then on the GoLive date, overwrite all Content DBs with the latest backup work?
Thanks in Advance :-)I think you can do it, i dont see any issue in advance upgrade.
Personally, I would go with this approach(as i did this). Migrate every thing and test it with live data(so any issue you can fix before live). On day of GoLive, upgrade the current backup.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog
Maybe you are looking for
-
Can I transfer credit from my count to another account?
I got lots of money in my account. Can I transfer some credit to my friend account? Anyone know please help me. Thanks
-
Determining datafile size for temp tablespace
Is there a rule of thumb for determining the size of the temporary tablespace, or at least a common starting value? -Thanks Chuck
-
Locate rogue java process eating swap space.
How can i find a rogue java process (lwp) eating up swap space ? The system is very low on swap but has half of memory free.
-
Live Flash Using HD Intensity Card
Hi All, I'm having problems with utilizing my new black magic design Intensity HDMI card. Here's the current setup. Dual processor Quad Core Xeon running on XP Intensity HDMI capture card Sony HDR-UX7 Camera (AVCHD) Flash Media Encoder 2.0.0.1013 The
-
[SOLVED] iptables chain's bytes counting problem
Can somebody explain me what is wrong? I've got this code: iptables -P INPUT ACCEPT iptables -P FORWARD ACCEPT iptables -P OUTPUT ACCEPT iptables -F iptables -X iptables -N traffic-output iptables -F traffic-output iptables -N all-traffic iptables -F