Migration for BW 7.0..

Hi all,
Please suggest the best approach for migrating the transfer rules,update rules into the transformations and migrating the data sources in BI7.0
During the migration system going to migrate the routines(start/update routines) as well or we have to write the routines in transformations?
Thanks in advance.

You may wish to get some Insights from below.
Assessing Migration Scenario's
Transformation Rules
Strategy toward new and 3.x datasource / infosource
Re: Few questions on BC activation..
Replicate NEW/3.x datasource - Methodology
Replicate NEW/3.x datasource - Change back to 3.x datasource Methodology
Re: Datasource Identification
Hope it Helps
Chetan
@CP..

Similar Messages

Move Mailboxes from Exchange 2007 to Exchange 2013 (Could not find a valid mailbox migration for esta organization)

Hi all, I am in full migration from Exchange 2007 to Exchange 2013 and everything went correctly.
I have migrated several mailboxes and are working well. But a few days ago, when I try to migrate a mailbox I get the following error and can not migrate:
"Could not find a valid mailbox migration for this organization"
Do you know that you can be?
regards
Microsoft Certified IT Professional Server Administrator

Hi,
From your description, the issue should be related to the migration mailbox. I recommend you check if the following account is existed in ADUC.
Migration.8f3e7716-2011-43e4-96b1-aba62d229136
If this account does not exist, you need to run setup /prepareAD and then enable this migration mailbox to check the result.
Hope this can be helpful to you.
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Amy Wang
TechNet Community Support

Data migration for open PO & PR

Hi All,
How to do the data migration for Open PO & Open PR ?
Thanks
pabi

You can BAPI "BAPI_REQUIREMENT_CREATE" for PR creation from data.
BAPI_PO_CREATE for PO creation.
Regards
Sanjay Kohli

Data migration for re-organization

hello,
I have to delimit the existing org structure in SAP system.
the steps are as follows:
1) create new org structure
2) create new org structure to cost center mapping
3) delimit the old org and positions
4) assign new org to positions
5) assign cost center to some positions
Please can some one tell me which is the easiest transaction to do data migration for the step 3.
Regards
Meghana

hi,
You can delimit the positions llike,
Plan Version    HI Plan version
Object Type     S Position
Object ID       50018201     Director - Enterprise Bus
Object abbr.    S 50018201
Infotype        1001 Relationships
Subtype
Planning status 1    Active
Validity        06/11/2008 to     12/31/9999
Data sample
Then there is option called Delimit (shift+F1) where you can demilit the dates.
Try this.
Reward me if helps,
Thanks,
Vasu.
Edited by: VASU MALYAVANTHAM on Jun 12, 2008 1:05 AM

Data migration for historical consumption

Hello,
I would like to get information about data migration for historical consumption.
To make forecast, we have to load historical consumptions for each materrial (data in forcasting view / Consumption vals).
Do you know if this is possible with a batch / direct input or we should develop a programm for that ?
Thanks,
PYR
Edited by: Pierre-Yves Ryckwaert on Jul 17, 2008 11:21 AM

I am certain that I can load historical consumption using IDOC menthod for message MATMAS03
However I have never uploaded historical consumption in an extra step after the material master migration, but I guess this should work as well with this IDOC. Just make sure that you do not overwrite other data in material master.

ODI Migration for 10.1.3.5 to 11.1.1.3 failed with Importing object

ODI Migration from 10.1.3.5 to 11.1.1.3 failed
DB Repositories -Oracle 11.1.0.7
I am trying to upgrade ODI 10.1.3.5 to 11.1.1.3 version
After running RCC and confirming that there are no issues I have run upgrade assistant utility
I am getting below error.
mporting file:/E:/Oracle/Middleware/Oracle_ODI1/oracledi.sdk/lib/scripts/xml/CONN_MEMORY_ENGINE.xml
[2012-05-02T06:17:27.770-07:00] [ODI] [INCIDENT_ERROR] [UPGCMP-00324] [upgrade.ODI] [tid: 14] [ecid: 0000JSDg06MF^6WFLzmJOA1FcIg5000005,0] Topology and Security Metadata upgrade failed.[[
oracle.odi.core.exception.OdiRuntimeException: com.sunopsis.tools.core.exception.SnpsSimpleMessageException: Importing object SNP_CONNECT : SUNOPSIS_MEMORY_ENGINE failed.
     at oracle.odi.impexp.support.ImportServiceImpl.internalReimportTopologyReferenceData(ImportServiceImpl.java:1372)
     at oracle.odi.impexp.support.ImportServiceImpl$18.doAction(ImportServiceImpl.java:1435)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:193)
     at oracle.odi.core.persistence.dwgobject.TransactionalDwgObjectTemplate.execute(TransactionalDwgObjectTemplate.java:48)
     at oracle.odi.impexp.support.ImportServiceImpl.reimportTopologyReferenceData(ImportServiceImpl.java:1429)
     at oracle.ias.mrua.plugin.odi.ODIPlugin$1.doInTransaction(ODIPlugin.java:774)
     at oracle.odi.core.persistence.transaction.support.TransactionTemplate.execute(TransactionTemplate.java:119)
     at oracle.ias.mrua.plugin.odi.ODIPlugin.doUpgrade(ODIPlugin.java:770)
     at oracle.ias.mrua.MRUA.executePlugins(MRUA.java:3703)
     at oracle.ias.mrua.MRUA.internal_driver(MRUA.java:2465)
     at oracle.ias.mrua.MRUA.driver(MRUA.java:1734)
     at oracle.ias.upgrade.gui.UAUpgradeThread.run(UAUpgradeThread.java:390)
Caused by: com.sunopsis.tools.core.exception.SnpsSimpleMessageException: Importing object SNP_CONNECT : SUNOPSIS_MEMORY_ENGINE failed.
     at com.sunopsis.dwg.DwgDuplicationTools.importOtherObjects(DwgDuplicationTools.java:2379)
     at com.sunopsis.dwg.DwgDuplicationTools.synonymImport(DwgDuplicationTools.java:1835)
     at com.sunopsis.dwg.DwgObject.importFromObjectLst(DwgObject.java:6249)
     at com.sunopsis.dwg.DwgObject.doImport(DwgObject.java:5705)
     at com.sunopsis.dwg.DwgObject.importFromXml(DwgObject.java:5365)
     at com.sunopsis.dwg.DwgObject.importFromXml(DwgObject.java:5334)
     at com.sunopsis.repository.manager.RepositoryManager.importObjectsUsingImportFromXML(RepositoryManager.java:6578)
     at com.sunopsis.repository.manager.RepositoryManager.treatObjectList(RepositoryManager.java:4630)
     at com.sunopsis.repository.manager.RepositoryManager.reimportTopologyReferenceData(RepositoryManager.java:6820)
     at oracle.odi.impexp.support.ImportServiceImpl.internalReimportTopologyReferenceData(ImportServiceImpl.java:1368)
     ... 11 more
Caused by: com.sunopsis.dwg.SQLMasterReposException: ORA-00001: unique constraint (ODIM.AK_CONNECT) violated
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:440)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:396)
     at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:837)
     at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:445)
     at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:191)
     at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:523)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:207)
     at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1009)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1315)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3576)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3657)
     at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1350)
     at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java:665)
     at com.sunopsis.dwg.dbobj.generated.GeneratedSnpConnect.insertAction(GeneratedSnpConnect.java:957)
     at com.sunopsis.dwg.dbobj.SnpConnect.insertAction(SnpConnect.java:1188)
     at com.sunopsis.dwg.DwgObject.insertActionForDuplication(DwgObject.java:2996)
     at com.sunopsis.dwg.DwgObject.insertForDuplication(DwgObject.java:3274)
     at com.sunopsis.dwg.DwgDuplicationTools.importOtherObjects(DwgDuplicationTools.java:2332)
     ... 20 more
[2012-05-02T06:17:29.895-07:00] [ODI] [INCIDENT_ERROR] [] [upgrade.ODI] [tid: 14] [ecid: 0000JSDg06MF^6WFLzmJOA1FcIg5000005,0] [[
--------- ODIPlugin.doUpgrade called org.springframework.transaction.TransactionSystemException: Could not commit ODI-JPA transaction; nested exception is javax.persistence.RollbackException: Transaction rolled back because transaction was set to RollbackOnly.
Caused by: javax.persistence.RollbackException: Transaction rolled back because transaction was set to RollbackOnly.
     at org.eclipse.persistence.internal.jpa.transaction.EntityTransactionImpl.commitInternal(EntityTransactionImpl.java:92)
     at org.eclipse.persistence.internal.jpa.transaction.EntityTransactionImpl.commit(EntityTransactionImpl.java:63)
     at oracle.odi.core.persistence.jpa.JpaOdiTransactionManager.doCommit(JpaOdiTransactionManager.java:362)
     at org.springframework.transaction.support.AbstractPlatformTransactionManager.processCommit(AbstractPlatformTransactionManager.java:651)
     at org.springframework.transaction.support.AbstractPlatformTransactionManager.commit(AbstractPlatformTransactionManager.java:622)
     at oracle.odi.core.persistence.transaction.support.TransactionManagerSpringAdapter.commit(TransactionManagerSpringAdapter.java:56)
     at oracle.odi.core.persistence.transaction.support.TransactionTemplate.execute(TransactionTemplate.java:132)
     at oracle.ias.mrua.plugin.odi.ODIPlugin.doUpgrade(ODIPlugin.java:770)
     at oracle.ias.mrua.MRUA.executePlugins(MRUA.java:3703)
     at oracle.ias.mrua.MRUA.internal_driver(MRUA.java:2465)
     at oracle.ias.mrua.MRUA.driver(MRUA.java:1734)
     at oracle.ias.upgrade.gui.UAUpgradeThread.run(UAUpgradeThread.java:390)

I also want to do the ODI Migration for 10.1.3.5 to 11.1.1.3, can you let me know your detail steps, many thanks in advance.

Deactivate automatic content migration for Web Page Composer (WPC) 2

Hi,
on our production system we are using at the moment Web Page Composer for SAP NetWeaver 7.0. Soon we would like to upgrade the system to release 7.3
We have now already set up the content for the new Web Page Composer on a pre-production system. After the production system is upgraded to the new release, it is planned that we will transport the content for the new Web Page Composer from the pre-production to the production system.
As far as I know, the content of the old Web Page Composer gets automatically migrated during the upgrade of the production system. Due to the reason we will the use content of the pre-production system, the automatic migration step is not necessary anymore during the upgrade.
Is there any configuration option that allows us to disable the automatic migration of old Web Page Composer content?
Best regards
Mario

Regarding the feedback of the SAP support, it is not possible to deactivate the automatic content migration for the Web Page Composer.

HT4796 It has been migrating for for 19 hours. What is taking so long?

It has been migrating for for 19 hours. What is taking so long?

Maybe there is a file that is blocked somewhere. You should retry the process, however under following conditions:
- first restart the computer and login with your account
- then eliminate as many startup applications and utilities as possible
- clean the desktop (put files in "My Documents", etc...)
- check powersaving settings, and remove any "turn off hard disk" options (use maximum performance)
- restart the computer again
- launch the migration tool, nothing else
- hope for the best

Data Migration for Open Purchase Order

Hi, All,
Is there anyone know how to Count the volume for Open Purchase Order. What's the normal strategy for the Data Migration and Cut-over stage?
My client want to know how many Open Purchase Order in the legacy system and then determine manual or automatic data migration. If manual, how to do? If automatic, how to do? Because all materials and vendors, plants are different number. How to track? How to find out to match between new and old?
Thank you very much

JC,
Sounds a bit early to be making decisions about the realization phase. It doesn't sound like you have finished the Blueprinting phase yet, much less the testing phase.
Anyhow, in my experience I typically use LSMW (Legacy system migration workbench) to load MM master data (material masters), Inventory (WIP, RM, FG, etc) Purchasing Master data (Vendors, Purchase Info Records, Source Lists, Quota Arrangements), and Purchasing transactional documents (POs, PurReqs, Scheduling Agreements, etc). Depending on the complexity and volume of data, it may be necessary to write custom programs to load the data. You will find this out during your requirements gathering.
It is uncommon but possible to load all of these data manually. I have never run across a client that wants to pay a consultant's hourly rate to sit at a terminal to peck away loading master data, so if the client intends to have his own users enter the data manually, the project manager should make provision that there will be qualified TRAINED client employees available for this data entry. I did help with a portion of a conversion once manually; of Sales Credits, but there were only about 30 SD docs to load. I did this the evening before go-live day, while I was waiting for some of my LSMW projects to complete in the background.
A good opportunity to 'practice' your data loads is right after you have completed your development and customization, and you have gotten the approval from the client to proceed from the pilot build to the full test environment. Once you have moved your workbench and customization into the client's test environment, but before integration testing, you can mass load all, or a substantial portion of your conversion data into the qual system. You can treat it like a dry run for go-live, and fine tune your processes, as well as your LSMW projects.
Yes, it is good practice to generate comparisons between legacy and SAP even if the client doesn't ask for it. For Purchase orders on the SAP side, you could use any of the standard SAP Purchasing reports, such as ME2W, ME2M, ME2C, ME2L, ME2N. If these reports do not meet the requirements of the client, you could write a query to display the loaded data, or have an ABAPer write a custom report.
You didn't ask, but you should also do comparisons of ALL loaded data - including master data.
It sounds like you are implying that the client wants YOU to extract the legacy data. For an SAP consultant, this is not very realistic (unless the legacy system is another SAP system). Most of us do not understand the workings of the myriad legacy systems. The client is usually expected to produce one or more legacy system technical experts for you to liase with. You normally negotiate with the technical expert about every facet of of the data migration. In addition, you will liase with business users, who will help you and the implementation team to logically validate that the final solution (turnkey SAP production system, fully loaded with data) will meet the client's business needs.
Finally, you mentioned how do you track the mapping of master data between legacy and SAP. There are many ways to do this. I normally try to get the legacy person do the conversion on his end, eg, when he gives you the load file, you would like to have already translated the master data and inserted the SAP relevant values into the file. If this is not possible, I usually use MS Access databases to maintain a master map, and I perform the mapping on a PC. If your data package is small, you can probably get by using MS Excel or similar.
Good Luck,
DB49

SAPDB Migration for Content server

Hi Experts
we have a SAP content server 6.3 running on 32 bit windows on SAPDB 7.3 .
We are planning to move this to a Unix box ( AIX or Solaris .. not decided yet). Is there a comprehensive guide available about the procedure we need to follow ?
1. Do we need to upgrade the source DB before migration ?
2. As per MaxDB admin guide database copy from IA32 to unix does not work and as per note 962019 we need to use loadercli. Any tips on loadercli use would be welcome
3. Any relevant information from past experience of similar exercise
4. Does SAP support this migration if we do not buy the MaxDB migration service from SAP ?

Hi there,
> Note"962019" mentions that:
>
> "Note that the target system must be installed at least with 7.6.05 build 11. An upgrade to this version does not help. Stop the target system (shutdown) and delete the database instance (drop database). SAPinst provides the option 'uninstall'. Here, you are led through the uninstalling process. The repeat the software installation with 7.6.05 build 11 or higher."
Yep, this is necessary to make the handling of source databases possible, that still have the _UNICODE parameter set to FALSE.
> I can only find MAXDB 7.6.03 installation CD on SAP SWDC, no 7.6.05 build 11 or higher, can I install 7.6.03 first, then update patch to 7.6.05 or higher?
Actually you don't need the installation CD.
The "patch" package contains everything you need to perform a full installation.
MaxDB patches are not really patches but always full installations.
Therefore you can either use the SDBSETUP or SDBINST tool (make sure to get the path-settings for <indep_data>/<indep_programs>/<dependend_programs> right then!) or you replace the installation package on the 7.6.03 CD you have with the 7.6.05 installation package from the patch download page in the service marketplace [http://service.sap.com/swcenter-3pmain].
Ok, hope that answers your questions.
Make sure to test the procedure before actually trying to perform the migration.
Very often questions and problems come up during the first time the process is done - and if that happens to be your productive migration weekend, well, cross-fingers that you get a MaxDB expert supporter on weekend duty then ...
regards,
Lars

Hardware Migration for sap R/3 4.7 Ext 200

Hi all
We are Upgrading our SAP R/3 4.7 Ext200 SR1 nonunicode oracle 9.2.0.8 to ECC6 EHP5 Unicode 11.2.0.2.
But first we need to migrate our hardware.(i.e we are shifting the data from our old server to new server).
We will install R/3 4.7 on new sever with oracle 10.2.0.4 and restore database backup from old server oracle 9 to new server oracle 10 .Now i need to know apart from following activities what else i need to consider.
instance profile parameter (ST02). we will give the same parameter value to new servers instance profile
Background Jobs(db13) we will schedule same if DB SID is changed or if we give same DB SID than no need to schedule again
System logical name (BD54)
RFC connections (SM59)
se06,STMS
We have done all above in two testing Servers.
Kindly guide me if any other activity is required.
Kindly support
Gurbir Singh

It depends on your landscape as well, apart from common system copy steps.
For e.g. in Production you might be having various interfaces etc. So, you will have to take care of those too.
Similarly try to extract something related to your landscape so that you don't miss anything, for e.g. registration of new servers into 'mail server' for SMTP/SCOT configuration, printer configuration if host/OS printer drivers/queues are needed etc.
Thanks

BW Upgrade 3.0 to 7.0 ( Data Migration for Prod)

Hello Experts,
We are doing BW Upgrade from 3.0 to 7.0, I need your suggestions.
We are going to upgrade BW Development, Quality and Production landscape to 7.0 and once technical upgrade is done we will go ahead with Function upgrade.
Now point is, once we done with all developments in Production environment then how we will take Historical data?
We are planning to connect Old BW system (3.X) as Source system to new BW 7.0 and then we are going to pull data.
But as we need to move data from Standard data sources like LO we need downtime for Production environment. Our challenge is to minimize this downtime for production environment.
Does any body having idea about this? I am aware of one IBM toll TDMF for data migration which migrate data from one data base to one data base with hardly 2 hours of downtime , but again for this licensing cost and etc is involved.
Please share your experiences and suggestions.
Thanks in advance.
Regards,
Pankaj Naik

You would not need to da a data migration if you are upgrading the existing 3.0 system with the data.
Edited by: Henry Janz on Jun 9, 2011 5:09 AM

File Server Migration - For ORG A Forest to ORG B Forest ( Need to create and Map Security Group automatically on new Migrated Folders - Please Help

I have two forest With Trust works Fine .
I have file server in ORG – A ( Forest ) with 2003 R2 Standard
I have a File server in ORG - B ( Forest ) With Windows server 2012 ( New Server for Migration )
I have 1000 + folders with each different permission sets on ORG-A. We are using Security groups for providing permission on the share Folders on ORG A
I need to Migrate all the folders from ORG – A to ORG – B.
I am looking for an automated method of creating Security Groups on AD during the Migration, Once the Migration is Done, I can add the required users to the security groups manually.
Example.
Folder 1 on ORG – A has Security Group Called SEC-FOLDER1-ORGA
I need an automated method of Copying the files to ORG – B and Creating a new security Groups on ORG –B Forest with the same permission on parent and child Folders. I shall Add the users manually to the Group.
Output Looks Like
Folder 1 on ORG – B has Permission called SEC-FOLDER1-ORGB ( New Security Group )
Also I need a summarized report of security Group Mapping, Example – Which security Group on ORGA is mapped with Security Group Of ORGB

Hi,
I think you can try ADMT to migrate your user group to target domain/forest first. Once user groups are migrated, you can use Robocopy to copy files with permission - that permission will continue be recognized in new domain as you migrated already.
Migrate Universal Groups
http://technet.microsoft.com/en-us/library/cc974367(v=ws.10).aspx
If you have any feedback on our support, please send to [email protected]

Photo's not displaying in iPhoto 11 post Mac Migrate for '09

I have migrated to a new iMac, for the most part it seems to have gone well, except my iPhoto library has all thumbnail but not picture files. All my events, faces, places....are there but when I try to edit an image or set one as my desktop I get a triangle with an exclamation point....Any ideas as to what has happened and how I fix?

That exclamation point is an indication that iPhoto has broken the file page to the original file. Therefore, make a temporary, duplicate copy of the library and try the three fixes below in order as needed:
Fix #1
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home/Library/Preferences folder.
2 - delete iPhoto's cache files that are located in your Home/Library/Caches/com.apple.iPhoto folder.
3 - reboot, launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding the the Option key. You'll also have to reset the iPhoto's various preferences.
Fix #2
Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library.
Select the options identified in the screenshot.
Fix #3
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Open items migration for document splitting

Hi,
We have done document splitting in 2011, Now all open items before 2011 to be migrated into the new fiscal year (2011).
Please suggest us how to migrate all the open items into new GL with document splitting activated?
Eagerly waiting for the reply.
Thanking you in Adavnce,
Raghuvir

Hi Raghuvir,
There were critical reasons why the split of the open line items of prior years has not provided within the standard migration scenarios.
The structure and the account assignment information of the already posted documents from the prior years is probably does not satisfy the new document splitting. Therefore it is not possible to split the documents form phase 0 (migration cockpit) based on the new the splitting rules set in the customizing.
It is also too critical to allow a customer based split in the BAdI since it cannot be garanteed if the sum of split amounts in all the
currencies still equal the old amount. Furthermore it cannot be traced any more where the split amounts are coming from which would lead to a problems regarding the auditability of the new g/l migration.
The only possiblity that SAP can offer to the customers is to take over the split amounts from the already existing SL ledgers which have been used before the migration to new g/l.
I believe that this answer your inquiry. I am sorry that I cannot give you a more positive answer regarding your issue.
Kind Regards,
Vanessa.

Data migration for MM Objects

Hi,
We are moving from Old SAP Box to New SAP Box because of reimplementation.
So we need to move master and transaction data from old system to new system.
So could you please let me know apart from following data , is there any other data whihc needs to be moved
1) material master,
2) Vendor master
3) Source list
4) Purchaisng info reorcd
5) Contracts
6) Open and Partial POs ( Partially delivered , fully Delivered but no invoice,invooiced but no GRs
Also what should be approach for moving open and Partial POs ?
Thanks
Manoj

Hi ,
thanks all for reply.
Since Our system will be reconfigured , do we need to migrate these conditions , texts etc. ( apart from Master and transaction Data)
Also, could you pls suggest me some approach for migrating POs in new system?
Thanks
Manoj

Migration for BW 7.0..

Similar Messages

Maybe you are looking for