Migration from 10g to 11i using sapinst - system copy

Hi ,
We are planning to migrate from our current platform to new platform.
Current Platform : windows 2003,oracle 10g , ecc6.0
Target : Windows 2008 R2 , oracle 11g , ecc6.0
The process we are going to follow is system copy (Import/Export)
what are the Prerequisites for the for the same.
Do we have to need Sap netwever 7.0 sr3 atleast to carry out import / export.
What about the kernel and Export ?
Is it compatible to move from 10g to 11g using sapinst system copy.
Thanks,
Neel

Hello,
>> what are the Prerequisites for the for the same.
Read the system copy guide
>> Do we have to need Sap netwever 7.0 sr3 atleast to carry out import / export.
No, all versions are valid. Read the system copy guide according to your NW version.
>> Is it compatible to move from 10g to 11g using sapinst system copy.
Yes, absolutely. On target system you install 11g software.
Thanks

Similar Messages

Migration from 10g to 12c using data pump

hi there, while I've used data pump at the schema level before, I'm rather new at full database imports.
we are attempting a full database migration from 10.2.0.4 to 12c using the full database data pump method over db link.
the DBA has advised that we avoid moving SYSTEM and SYSAUX objects. but initially when reviewing the documentation it appeared that these objects would not be exported from the target system given TRANSPORTABLE=NEVER. can someone confirm this? the export/import log refers to objects that I believed would not be targeted:
23-FEB-15 19:41:11.684:
Estimated 3718 TABLE_DATA objects in 77 seconds
23-FEB-15 19:41:12.450: Total estimation using BLOCKS method: 52.93 GB
23-FEB-15 19:41:14.058: Processing object type DATABASE_EXPORT/TABLESPACE
23-FEB-15 20:10:33.185: ORA-31684: Object type TABLESPACE:"UNDOTBS1" already exists
23-FEB-15 20:10:33.185: ORA-31684: Object type TABLESPACE:"SYSAUX" already exists
23-FEB-15 20:10:33.185: ORA-31684: Object type TABLESPACE:"TEMP" already exists
23-FEB-15 20:10:33.185: ORA-31684: Object type TABLESPACE:"USERS" already exists
23-FEB-15 20:10:33.200:
Completed 96 TABLESPACE objects in 1759 seconds
23-FEB-15 20:10:33.208: Processing object type DATABASE_EXPORT/PROFILE
23-FEB-15 20:10:33.445:
Completed 7 PROFILE objects in 1 seconds
23-FEB-15 20:10:33.453: Processing object type DATABASE_EXPORT/SYS_USER/USER
23-FEB-15 20:10:33.842:
Completed 1 USER objects in 0 seconds
23-FEB-15 20:10:33.852: Processing object type DATABASE_EXPORT/SCHEMA/USER
23-FEB-15 20:10:52.368: ORA-31684: Object type USER:"OUTLN" already exists
23-FEB-15 20:10:52.368: ORA-31684: Object type USER:"ANONYMOUS" already exists
23-FEB-15 20:10:52.368: ORA-31684: Object type USER:"OLAPSYS" already exists
23-FEB-15 20:10:52.368: ORA-31684: Object type USER:"MDDATA" already exists
23-FEB-15 20:10:52.368: ORA-31684: Object type USER:"SCOTT" already exists
23-FEB-15 20:10:52.368: ORA-31684: Object type USER:"LLTEST" already exists
23-FEB-15 20:10:52.372:
Completed 1140 USER objects in 19 seconds
23-FEB-15 20:10:52.375: Processing object type DATABASE_EXPORT/ROLE
23-FEB-15 20:10:55.255: ORA-31684: Object type ROLE:"SELECT_CATALOG_ROLE" already exists
23-FEB-15 20:10:55.255: ORA-31684: Object type ROLE:"EXECUTE_CATALOG_ROLE" already exists
23-FEB-15 20:10:55.255: ORA-31684: Object type ROLE:"DELETE_CATALOG_ROLE" already exists
23-FEB-15 20:10:55.256: ORA-31684: Object type ROLE:"RECOVERY_CATALOG_OWNER" already exists
any insight most appreciated.

Schema's SYS,CTXSYS, MDSYS and ORDSYS are Not Exported using exp/expdp
Doc ID: Note:228482.1
I suppose he already installed a software 12c and created a database itseems - So when you imported you might have this "already exists"
Whenever the database is created and software installed by default system,sys,sysaux will be created.

Error while importing data using SAPINST system copy method

Dear Friends,
I am in process of doing system copy from production to Quality.
OS: Linux
Database: DB2
We have completed export from production. I have uninstalled quality system before importing, uninstall of quality system was succesful. Know while importing the exported data by using sapinst method, i am getting error in phase define parameter. Where it is showing error as below.
==============
TRACE      2011-07-01 13:15:35.738
Found Error, error_codes[0] = <SELECT 'DATABASE-SCHEMA '||name||' COUNT : ( '||STRIP(CHAR(cnt1))||' ) ' FROM ( SELECT 'SAPGEQ' AS name , COUNT(*) AS cnt1 FROM SYSCAT.SCHEMATA WHERE schemaname='SAPGEQ' ) AS sub
SQL1036C An I/O error occurred while accessing the database. SQLSTATE=58030>
TRACE      2011-07-01 13:15:35.738
During execution of <last_command.sql>, <1> errors occured.
ERROR      2011-07-01 13:15:35.738 [iaxxinscbk.cpp:260]
MDB-01999 Error occured, first error is: <SQL1036C An I/O error occurred while accessing the database. SQLSTATE=58030>
===================
from the above error , it seems it is trying to conect to old quality database, but i don't know why it is doing so, as i have already uninstall the complete instance using sapinst. need your expert suggestion to over come this issue.
Thanks
Anil Bhandary

Hi ,
This is probably due to shutdown of the system not correctly.
you will have to re-create control file.
Regards
Nagaraju

Application has problems when migrated from 10g to 11g

Hi there,
I am hoping someone can shed some light on a problem I have in moving an application from Oracle 10g to Oracle 11g. The app works fine on 10g (uses Apache webserver with PL/SQL module, and APEX 3.1.2.00.2), but on 11g using the embedded web server and APEX 3.2.0.00.27, it doesnt. Most of the app works fine, but there are a couple of pages that provide the ability to add child rows to a parent/child relationship, where the parameter passing mechanism from one page to the next appears to suffer from some sort of corruption. I have traced this using the "session" and "debug" buttons on the developer interface, which show that the values of the parameters get changed inexplicably, when branching from one page to the next - even when the page is actually branching to itself.
I am using the "Set these items, "With these values" fields in the branch, and have verified that the correct values are being associated with the correct items in the application builder. But while this does work correctly under 10g, with 11g, the wrong values end up being passed. Just prior to the branch the set of parameters have the correct values, but immediately after the branch, one of the values is NULL, another has the value of a different item, and a third has a totally random value - I have no idea were it comes from!
I migrated the application from 10g to 11g using the APEX application developer's Export/Import options. There have been no other changes. Should this have worked? If so, any ideas what might have gone wrong?
Thanks,
Sid.

Well, I managed to solve this, but not in a way that makes much sense.
In desperation (I had tried almost everything else!) I changed the value of "Cached" in the page settings from "No" to "Yes", and ran the app, but the page didnt render correctly (in either Firefox or IE7) - in fact all that displayed was the developers toolbar at the bottom of the page. I changed the value of "Cached" back to "Y", ran the app again, and hey presto - everything worked fine! I actually did this a second time with a fresh import of the app from 10g, just to be sure I wasnt seeing things. I wasnt!
There was just one further issue - everything worked fine apart from this section of code in a page process:-
ELSIF (:p9_filter_type = 5) THEN
IF (:p9_x_gene_list IS NOT NULL) THEN
:p9_filter := :p9_x_gene_list;
END IF;
:p9_entity_types := 'GENE';
END IF;
In 11g the value of :p9_entity_types was not being set to 'GENE' when :p9_filter_type was 5. This was (and still is) working in 10g. I changed the code as follows:-
ELSIF (:p9_filter_type = 5) THEN
:p9_entity_types := 'GENE';
IF (:p9_x_gene_list IS NOT NULL) THEN
:p9_filter := :p9_x_gene_list;
END IF;
END IF;
... and now it works fine in 11g as well.
Only wish I knew why!

After Migrating from 10g to 11g Geeting problems with Guided navigations.

After Migrating from 10g to 11g Geeting problems with Guided navigations and section navigations not working.
And we are getting the following error <<odbc driver returned an error (SQLExecDirectW)>> where we have used navigations.
In 10G we have Guided navigation Reports to display the Reports links and intermediate reports for conditionally displaying the Dashboard section(Reports) but after migrating to 11g Guided navigation reports and conditional reports are not working..
We know that in 11g section navigation replaced with conditions and Guided navigation replaced with action link.. but
do we need to recreate those reports in actions and condition or is there any work around avoid reworking.

Hi Both,
Thanks for the reply ...
For Guided navigation we are getting like below error:
Odbc driver returned an error (SQLExecDirectW).
For Conditional dashboard section we are getting like below error:
"saw.aViewsToRefresh = [];saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:3jsmgfs3c1r4tn7c~n:condition'] = true;saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:nos5q43jvjmi643b~n:condition'] = true;"

NQS ERROR:14025 NO FACT TABLE EXISTS -after migrating from 10g to 11g

NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL in all the reports after migrating from 10g to 11g ...
then we applied the patch (One-off Patch for Bug: 11850704) for the error <<NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL>>
But after applying the above the above patch we are still getting the same error.
but in the above patch instructions file - Post deployment instructions to create the Variable
Post Install Instructions:
- To revert to the 10g navigator behavior for handling conforming dimensions,
you must set the following session variable via an init block in the RPD:
NO_FORCE_TO_DETAIL_BIN=1
The default value for the above variable is 0.
- Restart all servers (Admin Server and all Managed Server(s))
but we didn’t find the process to create the specified variable and Initialization block in the RPD
Can you please suggest us how to go further.
Our questions are:

Hi
Refer the below thread.
obiee 11g non-conforming dimensions and nQSError 14025
Might be help you/
Thanks,
satya

DB Migration from MYSQL to ORACLE Using Offline Capture

Hi
Am doing a database migration from MySQL to Oracle using SQL Developer (version 2.1.1.64). So far, I've successfully captured the MySQL database and converted it to the Oracle Model. However, when generating offline scripts to create the converted model schema into Oracle DDL scripts it managed to generate SQL to create: 1) User 2) Sequences 3) Tables 4) Triggers and 5) constraints.
It has created the SQL to add the primary key constraints and index constraints. Although it did the foreign key constraints in the SQL, the foreign key constraints seems to have missed the cascading options for the foreign key constraint. I.e. theres no reference of whether the foreign key constraint will restrict on delete or cascade etc.
We have a foreign keys in the MySql database that have different cascading options and these have not being ported over into the migration SQL. Therefore, all the foreign keys generated in the SQL by default are cascade to restrict on delete.
Does 'Generate Oracle DDL' not take into account a foreign key's on delete cascading option?
Any help or information would be greatly appreciated.
Thanks

Hello,
that reminded me for the following thread:
Migration Microsoft SQL Sever 2005 to Oracle 11g cascade on delete problem
That is a similar issue, isn't it?
I opened a bug for that, and it will be fixed in SQL Developer 3.1 (not in any 3.0 Early Adopter version). If you hit the same issue, there is no other way then using the workaround as used in the mentioned thread.
Regards
Wolfgang

Problem while migrating from Sybase to Oracle using Quick Migrate

Hi,
For SQL Developer version 2.1, while migrating from sybase to oracle, Using Quick migrate, during data move step, for the rows having ''(Blank) values in TEXT data type in SYBASE, which is convertd to CLOB in Oracle, the migration for that table terminates at that row.
However, NULL values in Sybase TEXT data type are successfully inserted in Oracle CLOB.
How can we overcome this?

reproduced and see exception in console, bug logged.
Edited by: Jade Zhong on Feb 1, 2010 6:10 PM

Migrating from 10gR2 to 11gR2 using impdp with network_link fails

Hi,
I'm trying to migrate a database from 10gR2 (Novell SLES 10) to a new server (Novell SLES 11) with 11gR2. I created a database on the new system with all required users and tablespaces. Then I used impdp in 11g with a database link to the source database:
impdp system/pw@db NETWORK_LINK=X_SourceServer FULL=Y
This command fails immediately with ORA-39113: unable to determine database version. Even using the parameter VERSION=10.2.0 doesn't change the result.
The Oracle Upgrade Guide tells me that upgrading is possible from 10* to 11* and recommeds impdp and network link. Is the failure perhaps a bug in the NETWORK_LINK procedure? Should I better try expdp on the source and impdp on the target with a dumpfile as intermediate (the database ist rather big, so dealing with files across the network will take a lot of storage capacity)?
Has anyone tried this method with success?
Thanks
Friedhelm
Edited by: user8964905 on 02.09.2011 02:34

This is due to an bug. The workaround is in the DOC
IMPDP From 10g TO 11g Gives ORA-39113, ORA-4052 & ORA-6544 PL/SQL: internal error, arguments: [55916] (Doc ID 1062428.1)

Table getting clipped after migrating from 10g to 11g

Hi We migrated our application from 10g to 11g, our application got converted to a trinidad application, skin details are follows:
trinidad skins.xml:
<skins xmlns="http://myfaces.apache.org/trinidad/skin">
<skin>
<id>
suede.desktop
</id>
<family>
suede
</family>
<render-kit-id>
org.apache.myfaces.trinidad.desktop
</render-kit-id>
<style-sheet-name>
skins/suede/suede.css
</style-sheet-name>
</skin>
</skins>
Trinidad Config.xml:
<?xml version="1.0" encoding="windows-1252"?>
<trinidad-config xmlns="http://myfaces.apache.org/trinidad/config">
<skin-family>
suede
</skin-family>
</trinidad-config>
The problem is when the page loads, the table in the page is shown in a small box (please check the image: http://files.oraclecorp.com/content/AllPublic/Users/Users-J/jaya.battaramvenkatanaga-Public/anonymous/tableclipped.JPG), I am not sure if this is skin problem or layout problem. Please let me know if there is any correction in skin details given above, other wise if lay out is the problem, please provide any documents regarding trinidad layouts.
Edited by: user9976446 on Mar 1, 2011 5:11 AM
Edited by: user9976446 on Mar 1, 2011 5:19 AM
Edited by: user9976446 on Mar 1, 2011 5:20 AM

Hi Jaya,
I think it's a layout problem, the table component or the outer component around the table is set to some default width value (300px?). Try setting the width explicitly to something larger, or see if you can use a stretchable layout component around the table.
If you post the code from your page here we might be able to say more.
For reference:
Trinidad tag library http://myfaces.apache.org/trinidad/trinidad-api/tagdoc.html
A useful migration guide from 10g to Trinidad http://wiki.apache.org/myfaces/from_ADF_to_Trinidad

Error while migrating from 10g to 11g

Hi
I am migrating a bpel process wit partner link activity from 10g to 11g
I got an error.It says there is no composite file in the process .so, migration is filed.
Pls help me...

Hi Eric,
Thanks for the reply.Here is the info in the logfile.
INFO: UPGBPEL-02036: Starting migration for source projects in the list : "C:\jdevstudio10131\jdev\mywork\myBPELApplication\PickDemo.backup.backup"
INFO: UPGBPEL-02029: Backed up source contents can be found in: "C:\jdevstudio10131\jdev\mywork\myBPELApplication\PickDemo.backup.backup.backup"
INFO: UPGBPEL-02007: Using source directory list: "C:\jdevstudio10131\jdev\mywork\myBPELApplication\PickDemo.backup.backup\bpel"
INFO: UPGBPEL-02008: Using target directory: "C:\jdevstudio10131\jdev\mywork\myBPELApplication\PickDemo.backup.backup"
INFO: UPGBPEL-02047: Upgrade messages are available in log file : "C:\OFM\jdev_home\jdeveloper\\upgrade\logs\PickDemo.backup.backup2010-08-16-15-43-33PM.log"
INFO: Suitcase directory is C:\jdevstudio10131\jdev\mywork\myBPELApplication\PickDemo.backup.backup\bpel
INFO: There are 0 task files in the suitcase
INFO: No more than one .task file in the upgrade source directory and hence not upgrading the bpel src
INFO: UPGBPEL-02041: Retrieving wsdl for partnerLink "AsyncWait" from "http://xppro:8888/orabpel/default/AsyncWait/AsyncWait?wsdl". This wsdl location can be used later for any manual setup of composite reference binding, if the upgrade plan includes using 1013x endpoints for the interim.
SEVERE: Upgrade failed. Check the logs for any exceptions. Ensure that the WSDL URLs specified in the project are reachable and a valid 10.1.3.x project is used for upgrade. Before re-attempting upgrade, restore the original project code source from the backup directory.
java.net.ConnectException: Connection refused: connect
     at oracle.viewgen.plugin.bpel.BPELPlugin.createComponentType(BPELPlugin.java:172)
     at oracle.viewgen.ViewGenerator.main(ViewGenerator.java:223)
Caused by: oracle.j2ee.ws.wsdl.LocalizedWSDLException: WSDLException: faultCode=PARSER_ERROR: Failed to read wsdl file at: "http://xppro:8888/orabpel/default/AsyncWait/AsyncWait?wsdl", caused by: java.net.ConnectException. : java.net.ConnectException: Connection refused: connect
     at oracle.j2ee.ws.wsdl.xml.WSDLReaderImpl.readWSDL(WSDLReaderImpl.java:371)
     at oracle.j2ee.ws.wsdl.xml.WSDLReaderImpl.readWSDL(WSDLReaderImpl.java:615)
     at oracle.j2ee.ws.wsdl.xml.WSDLReaderImpl.readWSDL(WSDLReaderImpl.java:258)
     at oracle.j2ee.ws.wsdl.xml.WSDLReaderImpl.readWSDL(WSDLReaderImpl.java:229)
     at oracle.viewgen.wsdl.WSDLUtil.getWSDL(WSDLUtil.java:60)
     at oracle.viewgen.componentType.bpel.BpelDDUtil.checkAndUpdateBPELDD(BpelDDUtil.java:477)
     at oracle.viewgen.plugin.bpel.BPELPlugin.createComponentType(BPELPlugin.java:107)
     ... 1 more
Caused by: java.net.ConnectException: Connection refused: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
     at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
     at java.net.Socket.connect(Socket.java:525)
     at java.net.Socket.connect(Socket.java:475)
     at java.net.Socket.<init>(Socket.java:372)
     at java.net.Socket.<init>(Socket.java:215)
     at javax.net.DefaultSocketFactory.createSocket(SocketFactory.java:212)
     at HTTPClient.HTTPConnection$EstablishConnection$2.run(HTTPConnection.java:4268)
     at HTTPClient.HttpClientConfiguration.doAction(HttpClientConfiguration.java:708)
     at HTTPClient.HTTPConnection.doAction(HTTPConnection.java:5379)
     at HTTPClient.HTTPConnection$EstablishConnection.run(HTTPConnection.java:4254)
i dont have any clue on this error.

.olb object library cannot open file in 11g - migration from 10g to 11g

I have an object library (.olb) that will not open in Foras 11.1.1.2.0. It opens fine in 10g. I have tried converting it to ascii (.olt) but it will not creat the binary filie in 11g - get PDE-PER001 Internal Error (cakaa 2) when I try to convert any ascii file from 10g into 11g.
I have tried using frmplsqlconv, the conversion tool on .olb but get following error when it is run: ERROR opening easstnd.olb :oracle.forms.jdapi.JdapiStatusException: Failed to load olb
Check subclass and library dependencies
Any help appreciated!
Kim

Kim,
We are not migrating yet, and we have not started converting all our forms and reports, but for the tests we have done, I never had to use frmplsqlconv (in fact, I don't know what it is). What I have done is:
1) As I told you before, I copied everything (forms, reports, etc.) we have to a new location.
2) I opened ALL the pll files with Builder 11g, saved them, and generated the plx files. The only problem I encountered here was that with some plls, Forms Builder crashed when opening them. I had to open those with Forms Builder 10g, and remove program units one by one until I found the culprit. After removing the program unit causing the crash, I opened the pll successfully with Forms Builder 11g, and created the program unit I had deleted.
3) After all plls were generated, I opened the forms I wanted to test, saved them, and generated the fmx files.
4) Same thing with reports (rdf and jsp files).
I have never gotten an error in Builder when closing plls, and we don't have either .fmt or .pld files.
Carlos

Migration from Essbase 7.5.1 to system 9 and then to 11

Hi all,
I have an immediate requirement to migrate huge essbase applications from essbase 7.5.1 to system 9.
as per my knowledge, i believe that we can migrate from 7.5.1 --->9.2.0.2--->9.3.1 or EPM 11i.
Anybody who have worked on the same please confirm.
Or if there is any ohter way to do it, please let me know.
will it be possible to migrate from 7.5.1 to 9.3.1 directly? i was able to migrate very simple applications directly from 7.5.1 to 9.3.1. I am sure there will be issues when we migrate huge applications.
Hope to get a response from u guys...
regards.,
Nishanth

Hi,
This has been covered so many times, just type Migration into the search
Here is an example of some of things returned
Re: Upgradation From 6.5 to 9.3.1
Re: Upgrading Essbase 6.5.4.2 to System 9
Re: Migrating Essbase 6.5 to 9.3.1
Re: Migration from 7.0.1 to 9.3.1
Re: Migration from version 7 to version 11
Small applications should be no different than big applications
Cheers
John
http://john-goodwin.blogspot.com/

Migration from Essbase 7.5.1 to system 9

Hi all,
I have an immediate requirement to migrate huge essbase applications from essbase 7.5.1 to system 9.
as per my knowledge, i believe that we can migrate from 7.5.1 --->9.2.0.2--->9.3.1 or EPM 11i.
Anybody who have worked on the same please confirm.
Or if there is any ohter way to do it, please let me know.
will it be possible to migrate from 7.5.1 to 9.3.1 directly? i was able to migrate very simple applications directly from 7.5.1 to 9.3.1. I am sure there will be issues when we migrate huge applications.
Hope to get a response from u guys...
regards.,
Nishanth

Hi,
This has been covered so many times, just type Migration into the search
Here is an example of some of things returned
Re: Upgradation From 6.5 to 9.3.1
Re: Upgrading Essbase 6.5.4.2 to System 9
Re: Migrating Essbase 6.5 to 9.3.1
Re: Migration from 7.0.1 to 9.3.1
Re: Migration from version 7 to version 11
Small applications should be no different than big applications
Cheers
John
http://john-goodwin.blogspot.com/

Windows Migration from 32bit to IX64 using R3load on 46C

Could anybody clarify this specific point ?
We are migrating from windows 2000 32 bit, Oracle 9.2 and SAP 46C with a 46D Kernel. We are using R3load and the export is fine.
Has anybody imported into windows 2003 64 bit with Oracle 9.2 IX32 plus SAP 46C with a 46D_EXT kernel? (I know it is only IA64 that has 64 bit support for Oracle 9)
In theory the above combination is not supported, however it would probably be easier doing this and then migrating to Oracle 10g, than getting an Oracle specific Central.R3S and altering the database template build file to create the Oracle 10 specific tablespaces.
Thanks

If you assume that quite a few customers will have to move from 32 bit architecture to 64 bit ( IX 64 ) and there are a few left on 46C, then there should be one route that is recommended ( ultimately 2003 64bit, Oracle 10g 64 bit ( IX64 ) and ECC 6 )
Our Database is quite small so we can use R3load, which has to be better than the r3copy type method referred to in note 932722.
The real crux is whether you can install Oracle at 9.2 or not, the oss notes suggest not for IX64 ( IA64 a different story).
Therefore you have to install at 10g, which is fine with R3load.
However you need a central.r3s that is 46C and points to/utilises a 10 Database, which we can get from INSORA102_0-10002548.SAR. The other gotcha is a dbsize.tpl that specifies the new 10g tablespace PSAPUNDO & SAPSAUX, which I can't find for the moment.
Has anybody been down this path ?

Migration from 10g to 11i using sapinst - system copy

Similar Messages

Maybe you are looking for