Migration from AIX6.1 to Solaris x64
Hi,
In our organisation, we are planning to migrate from AIX6.1 to Solaris x64. The processor which we'll be using is UltraSPARC+IV processor. I need clarification for below mentioned points.
1. Which guide to refer for moving the SAP System from AIX6.1 to Solaris
2. Is UltraSPARC+IV processor is supported for Oracle 10g
Also, please let me know the steps to be followed for the activity mentioned above.
Regards,
Ranjith
> In our organisation, we are planning to migrate from AIX6.1 to Solaris x64. The processor which we'll be using is UltraSPARC+IV processor.
Well - I think you're mixing a few things up here.
Solaris x64 refers to Solaris on the Intel or the AMD processor (x64 == x86_64 == AMD64)
UltraSPARC IV+ refers to a CPU developed by Sun (now Oracle).
> 1. Which guide to refer for moving the SAP System from AIX6.1 to Solaris
There are no specific guides for OS migrations. You use the heterogeneous system copy approach. However, migrating a database and/or operating system requires a certified migration consultant on-site doing the migration. If you do it yourself you'll loose support from SAP for problems during the migration and for the target system (see http://service.sap.com/osdbmigration).
> 2. Is UltraSPARC+IV processor is supported for Oracle 10g
Yes. Solaris 10 on SPARC Is supported.
Markus
Similar Messages
-
Migration from AIX Oracle8i to Solaris Oracle8i?
Hi,
I wonder how to migrate Oracle 8i (8.1.7) on AIX to Oracle
8i (8.1.7) on Solaris?
The Oracle version is the same, but only the O.S platform is
different. I have found the migration information from Oracle
web site but it only talks about migration between different
database.
Thanks.> In our organisation, we are planning to migrate from AIX6.1 to Solaris x64. The processor which we'll be using is UltraSPARC+IV processor.
Well - I think you're mixing a few things up here.
Solaris x64 refers to Solaris on the Intel or the AMD processor (x64 == x86_64 == AMD64)
UltraSPARC IV+ refers to a CPU developed by Sun (now Oracle).
> 1. Which guide to refer for moving the SAP System from AIX6.1 to Solaris
There are no specific guides for OS migrations. You use the heterogeneous system copy approach. However, migrating a database and/or operating system requires a certified migration consultant on-site doing the migration. If you do it yourself you'll loose support from SAP for problems during the migration and for the target system (see http://service.sap.com/osdbmigration).
> 2. Is UltraSPARC+IV processor is supported for Oracle 10g
Yes. Solaris 10 on SPARC Is supported.
Markus -
DB migration from HP-UX to Solaris
This is my assignment , what would be the good option to accomplish this?
Move DBs From HP-UX To Solaris , Replicate the HP-UX directory structure: /db1, /db2 and create on Solaris,Move databases from HP-UX (db1, db2) to SolarisOn 10.2, you can use RMAN and CONVERT DATABASE (in 10.1, you'd need to use CONVERT TABLESPACE for each tablespace), since your systems are both big endian (assuming Solaris on SPARC):
PLATFORM_ID PLATFORM_NAME ENDIAN_FORMAT
1 Solaris[tm] OE (32-bit) Big
2 Solaris[tm] OE (64-bit) Big
3 HP-UX (64-bit) Big
4 HP-UX IA (64-bit) Bighttp://download.oracle.com/docs/cd/B19306_01/server.102/b14237/dynviews_2172.htm
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/dbxptrn.htm#sthref1379 -
DB migration from RHEL 5 to Solaris x86(64bit)
DB version : 11.1.0.7
Platform : RHEL 5 (64bit)
We would like to move our non-ASM 11.1 DB which is currently in Linux (RHEL 5) to Solaris 10 x86 (64bit).
Both RHEL 5 (64bit) and Solaris x86 (64bit) are of LITTLE ENDIAN format.
1. I gather that I have to use RMAN's CONVERT DATABASE for this. Any Metalink note or URLs relevant to this migration ?
2. Would the migration be easier if my DB was in 11.2 ? I could upgrade my DB to 11.2 if there are any advangtages from migration point of view?You can use transportable tablespace option to move database accross platforms.
First, you must check tablespace dependecies.
Check whether your tablespace can transfer or not?
SQL> exec dbms_tts.transport_set_check('TEST_TS',TRUE);
SQL> select * from transport_set_violations;
set status of tablespace which you want to move to Read-only.
SQL>alter tablespace test_ts read only;
Convert datafiles of tablespace
RMAN> convert tablespace test_ts to platform 'HP-UX (64-bit)' format='/tmp/test01.dbf';
Export tablespace metadata using data pump export
expdp talip/talip directory=dump_dir dumpfile=test_ts.dmp transport_tablespaces=test_ts
copy datafile of tablespace to another db.
Import metadata to another db.
impdp talip/talip directory=dump_dir dumpfile=test_ts.dmp transport_datafiles=/data1/testts01.dbf
Talip Hakan Ozturk
http://taliphakanozturken.wordpress.com/ -
How can i migrate from oracle 10gR2 Linux x68 to SPARC Solaris 10?
Hi friends...
I have a 30GB database and need to migrate from Linux x86 to Solaris 10 SPARC.
Solaris 10 SPACR come this monday, then it's clean.
How i proceed?
Rod.Hi, good article Citrus, also you can read the next documentation for some detail and technical information about Transportable Tablespaces.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/tspaces.htm#sthref1322
Regards. -
Migration from Solaris Sparc server to Solaris x86
Hi ,
I would like to know.
Migration from SAP ECC6 , Oracle , Solaris Sparc to Ecc6, Oracle, Solaris x86 , Is this consider Heterogeneous or Homogeneous system copy?
Thanks.
Best Regards,
ck chaiSolaris on SPARC is a BIgEndian platform, Solaris on X86 is LittleEndian - so it's heterogeneous --> you need to use R3load to performa a migration - and you need to have a certified migration consultant on-site to do that migration (http://service.sap.com/osdbmigration --> FAQ).
Markus -
Difficulty migrating AD from 2003 x32 to 2008R2 x64
I'm trying to backstop my tech who is stumped so be gentile -
Environment:
Existing Standard Server 2003 x32 -> New Standard Server 2008 R2 x64
Problem:
Can't seem to complete the migration - getting error message that 2003 is offline (it's not).
ran dcdiag on 2003: "dcdiag is not recognized as an internal or external command, blah blah...."
ran dcdiag on 2008:
Running partition tests on : ConfigurationHi D-K-S,
I find a Windows Server Migration Tool, it supports migration from 2003 x86 to 2008R2 x64, for your reference:
Windows Server Migration Tools Installation, Access, and Removal
http://technet.microsoft.com/en-us/library/dd379545(v=ws.10).aspx
Based on my knowledge, the Dcdiag must run from Domain controller server.
Is there any error code, some like this:
http://support.microsoft.com/kb/978387
Thanks
Mavis
Mavis Huang
TechNet Community Support -
Migrating from Solaris 2.6 to 8.0
We are migrating from Solaris 2.6 to 8.0, and my concern is all code and application which are on 2.6 is portable or not ?. Also we are using oracle 8.1.7 as out database. All code are written in C.
Can anyone help me in this "porting"?
Thanks in advance
KPDoes someone can tell me where i can find information about
migration from solaris 2.6 to 8.0 concerning C and C++ programs and shell scripts
Thanks you in advance
sunsifac -
Migration from Sun solaris 8 to Solaris 10
Hi,
We are migrating from Solaris 8 to Solaris 10 with the compiler migration also earlier we are using Sun Studio 6 and now it is Sun Studio 11.
When we are compiling the code on Solaris 10 which has been running on the Solaris 8, we are facing some error. So could you help me on this
"ResourceManager.h", line 98: Warning (Anachronism): Type names qualified by template parameters require "typename".
"ConnectionMgr.h", line 62: Where: While specializing "ResourceManager<T>".
"ConnectionMgr.h", line 62: Where: Specialized in non-template code.
"ResourceManager.h", line 100: Warning (Anachronism): Type names qualified by template parameters require "typename".
"ConnectionMgr.h", line 62: Where: While specializing "ResourceManager<T>".
"ConnectionMgr.h", line 62: Where: Specialized in non-template code.
2 Warning(s) detected.
make[1]: *** [obj/ConnectionMgr.o] Error 2
Not sure of the warning , am not able to see these error on the compilation on Sun Studio 6.Below is the bit of the header file code, where the error is occurring.
98 typedef map<ResourceID, ResElement *>::iterator ResMapIterator;
100 typedef list<ResElement *>::iterator ResListIterator;
We are using a /opt/SUNWspro/bin/CC compiler and the verison is CC: Sun C++ 5.8
Please help me out about the issueSince you are jumping several compiler releases and two Solaris releases, you should migrate in two steps.
1. Get your application working with Sun Studio 11 on Solaris 8.
2. You can now run that application on Solaris 10, or you can rebuild it on Solaris 10 and then run it.
An application built on Solaris 8 will run on Solaris 9 and 10.
An application built on Solaris 10 cannot be run on Solaris 8 or 9.
We promise upward binary compatibility, allowing an old binary to be used with a newer compiler or on a newer Solaris. But we can't promise source code compatibility because we don't want to have to duplicate old bugs in old compilers.
C++ 5.8 in Sun Studio 11 detects errors that older compilers might have missed. The rules about where to use "typename" are one example.
I would not expect the warning about typename to be generated by either of the source code lines that you show, but I can't really tell without seeing a compilable example.
You need to use typename when you use a type that depends on a template parameter. Example:
template <class T> class C1 {
public:
typedef T Type;
template <class T> class C2 {
public:
typename T::Type a;
C2< C1<int> > c2i;If in C2 you do not specify typename, the compiler does not know whether T::Type is intended to be the name of a type. If it is not a type, the code is always invalid. The C++ rule is that if an an identifier is not known to be a type, it is not a type. You use typename to tell the compiler that T::Type is supposed to be the name of a type. -
Hi
We are planning to migrate from Solaris to AIX. What document will help me to follow?
If possible send me exact link.
Our current environment is R/3 4.6c, Oracle 9.2.3 and Solaris 5.9
Please let me know as quickly as possible.
Thank-you> We are planning to migrate from Solaris to AIX. What document will help me to follow?
Start with
http://service.sap.com/osdbmigration
--> FAQ
where you will see, that you need a certified migration consultant on-site to do that migration.
> Our current environment is R/3 4.6c, Oracle 9.2.3 and Solaris 5.9
since that version is out of support for a long time there are no more official migration guides available, that must be covered by consulting. Technically it will be done by R3SETUP with DBMIG.R3S as parameter file.
Markus -
Application Migration from HP-UNIX to SUN Solaris
Hi Gurus,
Need help on the application migration from HP-UNIX to Sun Solaris . Copied the filesystems APPL_TOP, OA_HTML, OA_JAVA, COMMON_TOP/util and COMMON_TOP/_pages from SOURCE( HP) to TARGET SUN-solaris as per 238276.1
Now trying to clone Autoconfig XML context file on the TARGET System
perl adclonectx.pl migrate java=\opt\java1.4 \
contextfile=\ul01\app\applmgr\lasrx\admin\LASRX_fiapd4.xml
Error: source context file ul01appapplmgrlasrxadminLASRX_fiapd4.xml does not exist.
Questions:
======
1. we still need to install jdk in the TARGET or copy the file system from source(HP) to target( Solaris) bring the JDK and how to check jdk on Solaris?
2. In clone autoconfig XML, contextfile=? Is the location of SOURCE or TARGER?
3. I think running above with root permission.
Please help somebody on this issue.
Thank You.Hi Hussein,
I need your help on the Application migration from HP-UNIX to SUN Solaris. As per the note 238276.1 we dont copy $806_ORACLE_HOME for cross platform migration, Copied all the filesystem from SOURCE to TARGET but rename it because it suppose to create while installing Middle tier.
Issue:1
=====
When i start to set environment like below, i get the error and
. /ul01/app/applmgr/lasrx/APPSORA.env
ksh: /ul02/app/oracle/lasrx/8.0.6_new/LASRX_fiapd4.env: not found
I am trying to install Middle Tier Technology Stack on SUN server ( Migrating from HP-UNIX to SUN solaris)
Issue 2: ( Display error) while install Tech Stack
=====
./rapidwiz -techstack
Rapid Install Wizard is validating your file system......
>> Wizard requires the DISPLAY variable to be set.
>> Please set your DISPLAY variable and restart Rapid Install Wizard.
even i can not see
echo $DISPLAY because not set the environment.
Need your help and suggetions on this.
Thank You. -
Db migration from Solaris 8i to windows 10g
There is requirement to move db from solaris8(dbversion8170 to window Server 2003 (10204 already installed)
DB is about 80gb big, what would be the best approach ?
I am thinking to create new db on windows, and export and import data.....any concerns/suggestion?
Source System
SQL> select * from v$version;
BANNER
Oracle8i Enterprise Edition Release 8.1.7.4.0 - 64bit Production
PL/SQL Release 8.1.7.4.0 - Production
CORE 8.1.7.0.0 Production
TNS for Solaris: Version 8.1.7.4.0 - Production
NLSRTL Version 3.4.1.0.0 - Production
Target System
SQL> select * from v$version;
BANNER
Oracle Database 10g Release 10.2.0.4.0 - Production
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for 32-bit Windows: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Productionwhat are other options i can try ?I only mention this approach because you asked. I wouldn't recommend it as a general strategy. exp/imp is the most straight-forward.
We are in the process of migrating from 9.2.0.6 to 11.1.0.7 (11.2 is not an approved standard yet in our enterprise), moving from Solaris to Linux, and consolidating two related instances into one.
We had to handle some unique situations due to our consolidation, so we did a lot of the steps manually that exp/imp does for you. A side benefit of this extra work is the actual down time is can be less than exp/imp itself, and avoids the need to dump all the data to disk and read it all again. We have about 500GB to migrate. It is a lot more work than a simple exp/imp, and is probably not be worth the effort for a single 80GB instance.
Our steps (oversimplified, there are more details than this) :
Set up the new instance and configure storage
Create users and roles in new DB
export structure only (using 9i exp)
import structure only (using 11g imp), without indexes or constraints
copy data (insert /*+APPEND*/ into.. select * from ... over a database link)
create indexes and constraints
Handling LONG data, materialized views, interdependencies between schemas each presented their own special circumstances I had to deal with.
The other path to get from 8i to 10g (mentioned only for academic reasons) is do a series of upgrades-in-place to get from 8i to 10.2.0.4 then use cross-platform transportable tablespaces to go from Solaris to Windows. -
Migrate from Windows XP x86 to Windows 7 x64 using MDT 2013
Hello everybody,
We are migrating our Windows XP(x86) workstations to Windows 7 (x64). We are aware of the necessary gymastics tu perform on USMT in a way to run the scanstate with an older version of USMT in Windows XP, and then run the LoadState in Windows 7 environnement
with the newest one.
The problem is that I cannot run MDT TaskSequences (referring to a X64 windows 7 Image) in Windows XP (full OS environnement). Can anyone please tell me if there is a way to get arround this ? is there any method to execute this migration ?
Thank you in advance.Hello,
You can use usmt with mdt. It's necessary to modify the script mdt
http://blogs.technet.com/b/mniehaus/archive/2014/01/09/migrating-from-windows-xp-to-windows-8-1-using-mdt-2013.aspx
http://www.deploiementwindows.com/migration-windows-xp-vers-windows-8-1-avec-mdt-2013/
Thank you Nicoals for your replay, but my problem is to run MDT task Sequence (including Windows 7 x64) on Windows XP. -
Migrating from ECXpert for NT to iPlanet for Solaris
When migrating from ECXpert for NT to iPlanet for Solaris, is their a way to reuse our compiled Mercator maps (.mmc files)? Our ECXpert environment was created in 1998 and we no longer have the source for the map (.mms file) and we are looking are migrating to Solaris. Is their a converstion utility or do they run without recompiling in Solaris?
I don't recall ever hearing that you could run a compiled map for windows (mmc) on another platform... If the windows machines is still going to be around, you could probably setup something so that translate runs on the windows box and then ECX can keep processing...
Which account is this for??? -
Migration from Solaris 9 to Solaris 10: Memory fault problem
We are facing to migrate appication from Solaris 9 to Solaris 10,
Compilation was not a problem, but while running the application it is raising the following fault,
tail of truss
Incurred fault #5, FLTACCESS %pc = 0x100025CA8
siginfo: SIGBUS BUS_ADRALN addr=0x101394CC
Received signal #10, SIGBUS [default]
siginfo: SIGBUS BUS_ADRALN addr=0x101394CC
core analysis show that the fault occurs at different points for different runs.
Please let us know if there is a patch to solve the same.
Thanks & RegardsSorry i should have mentioned it as migration from Solaris 8 to Solaris 10.
Other info: In solaris 8 we compiled using -m32 and on Solaris 10 we are using -m64.
We had never tried on Solaris 9.
i just tried compiling on Solaris 9, i got the same error as in Solaris 10.
I tried to find using dbx but it crashes at different points for different runs.
First Run by pointing connection string - schema 1
dbx m2 core
detected a multithreaded program
program terminated by signal BUS (invalid address alignment)
(/Teamware/bin/../WS5.0/bin/sparcv9/dbx) where
current thread: t@1
=>[1] AddClient(0xffffffff7ffff0c0, 0xffffffff7ffff2f0, 0xffffffff7ffff1d4, 0x373300, 0xff0000000000, 0x8080808080808080), at
0x100025ca8
[2] DBSERV_RadReadProxyClients(0x1, 0x10002599c, 0x0, 0x0, 0x0, 0x0), at 0x10006106c
[3] ClientInitialise(0x1, 0x0, 0x0, 0x0, 0x0, 0x0), at 0x1000263e8
[4] InitialiseDetails(0x1, 0x1, 0x0, 0xffffffff7ffff600, 0xffffffff7ffff5f8, 0xffffffff7ffff5f0), at 0x10002bd4c
[5] ReadDatabaseIntoSharedMem(0x1000a9dd8, 0x2aa5, 0x10cf000, 0x20000000, 0x1, 0x8), at 0x10000c5d0
Second run by pointing Connect-string to Schema 2:
detected a multithreaded program
program terminated by signal BUS (invalid address alignment)
(/Teamware/bin/../WS5.0/bin/sparcv9/dbx) where
current thread: t@1
=>[1] AddReplyMessage(0xffffffff7ffff1d8, 0x6564006d69732d63, 0xffffffff7ffff200, 0x656400, 0xff0000000000,
0x8080808080808080), at 0x10002e458
[2] DBSERV_RadReadRadiusReplyMessages(0x10002e348, 0x0, 0x0, 0x0, 0x0, 0x0), at 0x1000700a4
[3] RadiusReplyMessageInitialise(0x1000b0538, 0x0, 0x0, 0x0, 0x0, 0x0), at 0x10002e2dc
[4] InitialiseDetails(0x1, 0x1, 0x0, 0xffffffff7ffff5f0, 0xffffffff7ffff5e8, 0xffffffff7ffff5e0), at 0x10002bc3c
[5] ReadDatabaseIntoSharedMem(0x1000a9dd8, 0x2c29, 0x1be400, 0x20000000, 0x1, 0x8), at 0x10000c5d0
Maybe you are looking for
-
How do I move time machine backup on filled time capsule to external disk
TIme machine backups from imac and mbp are currently on 1TB time capsule running out of space. I want to split the time capsule and move just the imac backups to a new external drive which I want to share with a new macbook air. The new external driv
-
Path of the Find-Change Queries/Grep folder in ID CC 2014
Hi, Is this var correct to localize the path of the Find-Change Queries/Grep folder in ID CC 2014? var query_folder = app.scriptPreferences.scriptsFolder.parent.parent + "/Find-Change Queries/Grep/"; Thanks in advance!
-
500Internal Server Error The Web Dynpro application PageBuilder has expired
hi all , i am using public url domain to access my portal through internet . i have done a reverse proxy using apache . from my server url i am able to get every page . from public url i am not able to view my webdynpro applications . its showing the
-
How to Remove Unwanted HTML Text Appearing in Compiled Help Topics
I am working on a RoboHelp HTML project in version 7.03.001. Recently, when checking files into source control, the program we use informed me that two of my topics (htm files) and the index file (.hhk) were "conflicted." When I examine the compiled
-
is there a way to set the iphone up as a modem to get your mac online