MIGRATION FROM CLASSIC TDS TO EWT

< MODERATOR: All points have been UNASSIGNED and the message locked. Please do not share email addresses, documents, or links to copyrighted or company confidential information on these forums. >
Hi,
WE have 7 company codes(manufacurting concern), and we are in 4.7c and we using Clasicc TDS and we want to go for EWT.
Please suggest the best way and please give sme documents if possible. and our calendear yearis frm April to March.
regards,
sgs

Hi Gopal
Here is the link from SAP help on this subject
http://help.sap.com/saphelp_47x200/helpdata/en/66/efdf3a61ef300ee10000000a114084/frameset.htm
Please let me know if you some moreinfo
Thanks
Ashok - Assign points for useful answers

Similar Messages

Migration Date when migrating from classic to new g/l

Hello gurus,
I am planning a migration from classic to new g/l, but this fiscal year it will be not possible to finish phase 0 (from migration model plan). Is it possible to do it in the middle of the new fiscal year, what are the withdrawls or issues? what do you recommend me? What strategy can I use?
Thanks,
Silvia Guillen

Hi Silvia,
There is differnce in migration date & activation date. Migration date will always be the firts day of new fiscal year.
But as on migration date you have to bring your config changes to PRD.
For details please check the following link -
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=812919
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1070629
Regards,

Migration from Classic WHT functionality to Extended WHT functionality

Hi Experts,
For a US based client we have a requirement which requires migration from Classic WHT to Extended WHT.
I would appreciate any pointers on this, especially if you have a document containing all the steps required for migration, please do share with me.
mail to - [email protected]
Thanks

Hi
please see below docuemnt
http://help.sap.com/saphelp_470/helpdata/en/66/efdf3a61ef300ee10000000a114084/content.htm
Migration from Withholding Tax to Extended Withholding Tax - India - SAP Library
Withholding Tax Data Migration Tool - India - SAP Library
378532 - Migration to Extended Withholding tax:documentation
339523 - Warning when activating extended withholding tax
353552 - Migration to extended withholding tax - Programs
353553 - Migration to extended withholding tax - Information
186989 - Changeover withholding tax
many thanks

Migration from Classic to Extended Classic

Hi all,
I would be grateful if you could let me know what is technically involved in migrating from classic to extended classic. We are using SRM 4.
I would also like to know how long this would take and any cost information and an impact on any current master data and new data that would need to be set up.
Many thanks.
Jeff.

Hi,
Pls see the foll thread:
Switching between Classic and exended classic
Related threads:
Classic / Extended Classic Scenario for Shopping Cart
Switch from Extended to Classic ?
Change from ECS to Classic Scenario
BR,
Disha.
Pls reward points for useful answers.

Migration from Classic GL to newGL

Hi All,
We are planning to migrate from classic GL to newGL, in this regard we have come across SAP Note 1070629 (FAQs: New general ledger migration) and point 43 in this note says it is not possible to make any postings to previous fiscal year.
Our audit for the fiscal year 2009 & 2010 is not yet finalized and user is required to make posting into these previous fiscal years.
Our question is that is it possible to make any entries in these previous years after migration to newGL.
I hope many of you might have come across such situation in newGL migration project. Could you please share your experience on how to handle this critical issue.
Thanks & Regards

Why do you want to reinvent the wheel?
Look at some documentation like
Migration to New General Ledger Accounting (General)Quick Migration for Basic Scenario
1070629 - FAQs: Migration to General Ledger Accounting (new)
Mastering the Implementation of General Ledger Functionality in SAP ERP Financials
Regards,
Raymond

E-mail accounts setup - migrating from classic & webstar to panther

I used workgroup manager to set up accounts, enabled e-mail & selected server but when I use system admin to look at the mail email accounts none show up also I can't see any users for the ftp server. The appropriate domains have been created. I've read every thing I can get my hands on yet I'm missing something. I'm finally upgrading my server to os x from classic running webstar4.5. Any help would be appreciated. John

E-mail accounts will only show up in Server Admin once they have either received mail or been accessed via IMAP.

GL Migration from Classic GL to New GL using ABAP code

Dear Experts,
In this scenario, I am trying to develop ABAP Program which will Transfer Documents from GLT0 to FAGL* Table, i want to take opinion about
Is it feasible to update Database Table using ABAP Query(Using INSERT, UPDATE or MODIFY)?
What are possibilities of Database get into inconsistent state?
Any other factors I must consider during this task?
Regard,
Pritesh Raut

Why do you want to reinvent the wheel?
Look at some documentation like
Migration to New General Ledger Accounting (General)Quick Migration for Basic Scenario
1070629 - FAQs: Migration to General Ledger Accounting (new)
Mastering the Implementation of General Ledger Functionality in SAP ERP Financials
Regards,
Raymond

Migration from Classic Profit Center Accounting to New GL PCA

Hi,
We are currently using SAP ECC 6 with Classical PCA. We now want to migrate to new GL for document split purpose. We have managed to get the FI implications of this conversion. I need to know the implications on Controlling post this migration.
Regards,
Sangeeta

Hello,
Please refer SAP Notes
826357
1086181
1070629
Regards,
Ravi

Migration from classic G/L to new G/L in ECC 6.0

Hello gurus,
We are implementing new G/L. I am looking for AC212(Migration to the new General Ledger) documentation.
If anyone has AC212 material that helps alot. Please send me to [email protected]
Thank you for your help in advance
Regards,
Geeta

Hi Jotsna
one asset accounting issue problem
please give me ur mail id i send u
problem is
Please find my analysis on the below issue
First they have done MIGO for the CAPWIP asset no 21700500019 on 18.03.2008 but this asset was trasnferred to Main Asset 214009000454 asset thru AIBU ON 20.03.2008 .Now the asset 21700500019 is deactivated on 25.03.2008, depn run also run for this Main asset.
Now while doing MIRO system says " can not post the 21700500019 asset number deactivated "
arjun

Migrating from SRM 7.0 Classic to ECS - Seeking some clarifications

Hello Friends,
We are now planning to upgrade from SRM 5.0 to SRM 7.0 and then migrated to Classic to ECS. We have the below challenging points which I need clarification,
1) How do we go about the Taxation and Pricing Part, If we migrate from Classic to ECS
2) Presently we have R/3 contracts in place and the same is linked to MDM catalogue and now the client wants the contracts to
    be in SRM. In that case how do we go about the strategy.
3) Asset Procurement: Now all WBS element are converting into assets by running the Z-Program in between PR and PO in R/3
   system. But when we migrate to ECS PO gets created in SRM, so how do we go about the asset procurement in ECS scenario.
4) Confirmation and Invoice transferring to R/3 through Idoc distribution Model. Going forward in SRM 7.0 the same will continue or
    do we go with SOA. Please confirm.
Further to this can you please let me know, what are all the major challenges for upgrading the system to SRM 7.0 and migration from Classic to ECS.
I would appreciate for you quick response. Points will be awarded for appropriate answers.
Thanks and Regards,
Ram.

Ramesh,
Few inputs for this project
1. You need to clearly seperate out the upgrate (5.0 to 7.0) and Migration (Classic to ECS) in your project planning to derisk the project i.e. you should have seperate testing cycle time/ efforts for upgrade and then on migration so that functional/ teachnical team working out in the project can clearly identifies issues between upgrade and migration seperately and work on them.
2. You have to work with business to make a decision on conversion of old classic PO's (incomplete GR/IR still required) and PO in process (SC created under approval in SRM). I strongly suggest you should not involve into conversion and keep it out of this project.
3. SRM do have option to take care of your tax configuration. BTW most of the company use external software to calculate tax amount.
4. You need to build workflow for PO in SRM since now PO will be created in SRM.
5. You need to create smartform / output determination in SRM for the PO. Please note SAP has provided some consulting notes if you continue to handle document transmission in backend with ECS.
6. Yes a distribution model needs to be setup for confirmation and Invoice if you are not doing it now in classic scenario.
Asset procurement solution you mentioned looks specific to your Org business needs, you need to explore to fit into new environment.
All the best
Thanks, Sachin
Edited by: sachindubey on Apr 10, 2010 12:13 PM

Data Migration from 4.7 to ECC 6.0

Dear Friends,
We are doing upgration from sap4.7 to ECC6.0.
We have activated new gl. We have configured all ecc6.0 functionality.
But we stuck on data migration from classic gl to new gl.
We want to activate the migration cockpit but system is asking license key.
My question is, which license key it is?
From where we will get this?
Kindly don't send me any links and any documents related to ecc6 functionality.
Please guide us on this.
Thanks & Regards,
Reva Naik

Hi,
following link may give you some hints:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/2e/9e4638a28b2763e10000009b38f8cf/frameset.htm
Regards
Bernd

Migration from Serial polling to Serial queue with event handler

Hi, I am trying to migrate from classical serial polling communications to serial queue with "event handler" for the buttons pressed by the user. I have placed four while loops, one for the event handler, a second one for serial reading, a third one for serial writing (depending on what button was pressed) and the last one for processing what was read from the serial reading while loop, via a queue.
My attached device reads the signals from 8 sensor ( 4 temperature and another 4 temperature plus humidity in the same sensor ) and send them via serial to Lavbiew.
First of all, only once just after running the LV program, I must turn on my attached device with an ON command plus a carriage return after that the device will respond with the number of sensors plugged to it, disabling the corresponding buttons in the front panel. Then labview must wait until I pressed Acquire Button (event handler) and send a CF command plus what sensors to acquire plus a carriage return, then the device will respond continuously to labview with the sensor readings until I press the stop button (event handler), there is also another button to exit the program, also with event handler.
I am having problems using the event handler and the queues because I am new using these structures, I have looked at the LV examples but there is nothing concrete on using serial with event handler and queue.
Take a look at my VI and you will soon notice what kind of problems I am having, any suggestions will welcome.
Thank's in advance.
Regards.
Attachments:
serial queue.zip ‏76 KB

Hi Luisete,
Maybe the problem arise because you are En- and DeQueue in parallel. You do a lot of things in parallel, that is nice if you are sure that one loop doesn't have to wait for another loop. Make sure you don't dequeue before enqueue.
Hope this helps
I never knew that the standard error cluster output could be wired directly to the loop control of a while loop.
First time I see this

Migration RE classic to RE flexible

Hi All
I migrate from classic to Flexible, but when I migrate with a custom program (not REMICL) the system generate a short dump SAPSQL_ARRAY_INSERT_DUPREC (RE classic object has the same number of RE-FX object).
The RE-FX table are empty but I saw that in the JSTO and JEST are full and I find the entry of my new object that I need to create.
How can I do?
Sarah

Hi Nilesh,
this thread is already answered. If you have an additional question please open a new one.
Regards,
Franz

Migration from Withholding Tax ( Classic ) to Extended Withholding Tax

Dear All,
I am doing the Migration from Withholding Tax ( Classic ) to Extended Withholding Tax, I am getting the following error.
I made all the customization and done the necessary process flow steps.
Now I am doing the last transaction i.e. Migration Programme ( J1INMIG )
I am getting the following error. i.e.
Health Check not carried out or health check has reported errors....
Message no. 8I775
Diagnosis
Before migration of data is carried out, it is advisable to carry out the integrity of customizing in both SAP ECC and CIN.
It appears that either the health check is not carried out, in which case it can be run using transaction j1inhc, or the health check has reported errors.
Procedure
Run health check program if not already run.
Resolve the errors reported in customizing and re run the health check.
In case you do not wish to use health check tool, manually update the field 'STATUS'as 'X' for the company code.
So I checked in Health Check ( J1INHC ). Here All are showing the Green Status.
EXCEPT THE FOLLOWING IS IN YELLOW STATUS .
34            Invoice with Payment Type tax code created in classic cannot be executed after switching to EWT.
               These documents have to be processed before switching to EWT.
               SERIAL NO.     COMPANY   DOCUMENT NO.   POSTING DATE   FISCAL YEAR
               1              ITS       1900000022     09.12.2009     2009
               2              ITS       1900000027     09.12.2009     2009
               3              ITS       1900000023     09.12.2009     2009
               4              ITS       1900000021     09.12.2009     2009
               5              ITS       1900000020     09.12.2009     2009
               6              ITS       1900000019     09.12.2009     2009
               7              ITS       1900000018     09.12.2009     2009
               8              ITS       1900000016     09.12.2009     2009
               9              ITS       1900000024     09.12.2009     2009
               10             ITS       1900000025     09.12.2009     2009
               11             ITS       1900000015     08.12.2009     2009
I noticed that because the above documents are having the openitems and down payments. And If I clear the these documents it is becoming Green Status.
It means now my Health Check is correct, Because all are showing the Green status.
Now If I run the Migration Programme ( ( J1INMIG )
IT IS NOT EXECUTING. IT IS GIVING THE MESSAGE THAT NO DOCUMENTS FOUND.
Kindly advise I don't understand the above Migration programme execution and the error details.
Regards
Kumar

Hi All,
Nobody has not answered my issue.
Otherwise anybody can explain in detail about " MIGRATION PROGRAMME " ( J1INMIG ).
I want details about this last T.Code only i.e. J1INMIG and remaining all the necessary steps I completed.
An early reply will be highly appriciated.
Regards,
K. S. Sai Kumar

Migration from 4.7 to ECC 6.0 - Deactivate Update of Classic General Ledger

My client has migrated from 4.7 to ECC 6 version. In the ealier version we had a report developed in FI Module, which was created as a local object.
Now when we are trying to activate the same development in ECC 6.0 and I am trying to use the dynamic selections option of this report, system is throwing an error and taking to this customisation node :
Fin Accounting Global Settings (New)->Tools ->Deactivate Update of Classic General Ledger (GLT0).
Can I know the implications of this option ? Can I deselect the check boxes mentioned in this node ? What could be the consequences ?
Please guide me.
Thanks
Ravi

Hi
GLTO is the table that used to get updated with the totals prior to ECC 6.0 (in 4.7).
After migrating into ECC 6.0 the GLTO is no more valid and the new table FAGLFLEXT replaces GLTO.
SAP also recommends to deactivate the update of GLTO via Fin Accounting Global Settings (New)->Tools ->Deactivate Update of Classic General Ledger (GLT0) once you have establised that the new GL is working correctly.
I dont foresee any consequences of deactiavting GLTO if the new GL has been activated in your new client and you are sure that the NEW GL is working correctly.
Good Luck
Hari
null

MIGRATION FROM CLASSIC TDS TO EWT

Similar Messages

Maybe you are looking for