Migration from Data Services 3.2 - Data Services 4.0 document

Hi Experts,
Can somebody provide me a document or link where i can find Migration or Process Flow from Data Services 3.2 to Data Services 4.0?
Any help in advance is appreciated
Thanks
AJ

Hi,
check the DS Upgrade Guide:
https://websmp109.sap-ag.de/~sapidb/011000358700001323242010E/sbo401_ds_upgrade_en.pdf
You need a S-User with Password for login.
Regards
-Seb.

Similar Messages

Migration from CA service desk to SCSM 2012 r2

Does any one have experience with migrating from CA Service Desk to SCSM 2012 R2?
How did you accomplish the migration

This is a common misconception about IT Service desk software, and a common reason that most helpdesk and service desk implementation fail miserably; that this something that you can just swap in and out like an email system. A service desk system isn't
just a file sharing site that you can forklift your data from and move on like before. Your service desk software is an
ERP for IT. Your Service Desk software is somewhere between a model of your IT department and a 5th column manager for your IT staff.
The typical methodology for doing this type of migration is to construct a straw model of your IT department, specifically your service book and work groups, and review your service book and incident handling procedures. once we have a solid understanding
of how your department actually runs at a conceptual and work item level, we can build a model of those work flows into service manager.
At that point, once we have a functional model of your department constructed in service manager, then we can start moving config item data. For 8 out of 10 implementations, this is better accomplished using a fresh discovery of config items from original
sources, which can then be reused to create an update methodology.
Provance's DMP (and to a lesser extent, the out of the box connectors, like the CSV connector) is a great tool for this, since it lets you build import templates that can be periodically run to update new data like purchases
for work items, a Knife edge cutover day is the simplest conversion, but certainly not the only option, that is, you decide January 15th is the day that the new system is available, and all work items go into the old system until January 14th,
and the old system will be locked for new requests on the 15th. any work in the old system is worked and closed using the usual process (even after the 15th) until the old system fades into obsolescence over the next 30 or 60 days.
You might notice that for medium enterprises (5,000 employees or so), this process typically takes several weeks of prep, and a couple of months of implementation, and it scales fairly linearly based on the size of your IT department. small departments
(somewhere below 20 analysts) can be done in a month or so, and very large IT groups, this can take a year or more.

Problem with date format parameter in SSRS2012 after migration from SSRS2008

Hello,
We are migration from
Reporting Services 2008 on Windows 2008 server
to
Reporting Services 2012 with Always On on Windows 2012 server.
I have a report that expects a date in the querystring: "...&DateTo=17/09/2014"
This use to work in the previous environment and now fails !
I logged onto the server with the credentials that runs SSRS and changed its regional settings to French(France): It didn't helped.
I tried passing in the date otherwise "...&DateTo=09/17/2014": it worked !
I tried changing the regional settings in my IE and it worked but that can't be a solution... it is still working on my Windows 2008 server... unless there is a statement from Microsoft that it explains that now it works only like this but I would be surprised... is it ?
I also saw that changing a directive in the web page can help but, why did it stopped working, is it the handling of a default value for regional settings that changed in SSRS ?
I would need help to understand this, thank you for any help you can provide.
Regards,
Claude VERNIER

Hi Claude,
Based on my research, SQL Server doesn’t supports DD/MM/YYYY date format. When we insert “17/09/2014” value in a date type column, it pops up an error message that “String was not recognized as a valid DateTime”. It means that the value “17/09/2014” is acted
as “2014/17/09” string. So in your scenario, we cannot get the expect results.
To work around this issue, we should change it to “09/17/2014”.
Reference:
Date and Time Data Types and Functions (Transact-SQL)
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Platform Services migration from 6.1.1 to 6.1.3

Hi,
Did not find anything on migrating from platform services 6.1.1 to 6.1.3.
Do we not need any changes for this migration?
Regards,
Mayank Batra

nothing is needed if we are migrating from version 6.1.1 to 6.1.3 . Right?

Migrating from 8170 to 11g R2

Hello team, does anybody have the migration path to migrate an 8170 database to 11g R2? Document id 785351.1 talks about migrating from 92 to 11gr2. but i cant find any document to migrate from 8i.
Thanks in advance.

First of all direct upgrade is not possible from Oracle 8i to 11g.
What's your four digit of the Oracle 8i Database? indirect upgrade can be done as the foolowing version,
8.0.5 (or lower) -> 8.0.6 -> 9.2.0.8 -> 11.1
8.1.7 (or lower) -> 8.1.7.4 -> 9.2.0.8 -> 11.1
First decide the upgrade path
http://download.oracle.com/docs/cd/B28359_01/server.111/b28300/preup.htm#i1007814
Second Choose an Upgrade Method
* Database Upgrade Assistant
* Manual Upgrade
* Export/Import
http://download.oracle.com/docs/cd/B28359_01/server.111/b28300/preup.htm#i694345
Export/Import Method (as you wish to do)
http://download.oracle.com/docs/cd/B28359_01/server.111/b28300/preup.htm#BABFHFIJ
References:
Oracle® Database Upgrade Guide 11g Release 1 (11.1)
http://download.oracle.com/docs/cd/B28359_01/server.111/b28300/toc.htm
Oracle Metalink Note:429825.1
Subject: Complete Checklist for Manual Upgrades to 11gR1
Oracle Metalink Note:132904.1
Subject: Compatibility Matrix for Export And Import Between Different Oracle Versions
Regards,
Sabdar Syed.

Migration from Laserfiche to SharePoint 2013

Hi Guys,
is there a migration tool or any other method that allows the migration from Laserfiche (MYSQL Database) to SharePoint 2013?
The document to be migrated are encryted so the tool has to perform some decryption method before submitting the documents to SharePoint.
Thanks for the help,
Alex

Hi Guys,
is there a migration tool or any other method that allows the migration from Laserfiche (MYSQL Database) to SharePoint 2013?
The document to be migrated are encryted so the tool has to perform some decryption method before submitting the documents to SharePoint.
Thanks for the help,
Alex

Migrating from RHEL4 to OEL5

Hi,
How to migrate from RHEL4 to OEL5? Is there any instruction document exist for the same?
Regards,
S.K.

I am +1 to Milos Puchta,
Additionally you can use
Robocopy command or
Robocopy GUI tool to accomplish the same.
Regards, Ravikumar P

Error on Desktop: iTunes unable to load data class information from sync services.

Error on Desktop; iTunes unable to load data class information from sync services.

Hi there Randall112,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
http://support.apple.com/kb/ts2690
-Griff W.

When trying to sync my I Phone 4 to I tunes I am getting a message: Unable to Data class information from Sync Services. What does this mean?

When I-tunes is trying to sync my phone, I get a message regarding Data Class Information from Sync Services saying they were unable to do this. I have no idea what this means. I have not been having any problems with syncing info from my computer to phone until just now. I am trying to install new alert tones from an app that I purchased. The alert ones are now in my library on I-tunes and they play but they are not syncing to my phone. The snycing options is not available in my library and when I try to manually sync these tones, nothing is happening. I recently purhcased ringtones from the I-tunes store and from my phone and they downloaded with no problems and are synced onto my computer and are showing up in the same library list as the tone alerts which I cannot seem to sync. I have no idea why this is. Please help!

In the course of your troubleshooting to date, have you worked through the following document?
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert

Just updated to IOS 7 and two issues: First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services".

Just updated to IOS 7 and two issues:
First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services". I'm not sure what this really means...
The second issue is when I try to select "Manually Manage Music"
The iPhone "My iPhone" is synced with another iTunes libary on "MY-PC". Do you want to erase this iPhone and sync with this iTunes library? An iPhone can be synced with only one iTunes library at a time. Erasing and syncing replaces the contents of this iPhone with the contents of this iTunes library."
So... I don't want to do that, but I do what to be able to Manage my music. I'm not sure what it means by being synced to another iTunes unless it means to an older version of itunes?
Anyone have any ideas?

I cannot address the sync services error right now, but the error that you receive when you change from sync to manually manage music is what happens when you change. Once you change to manually manage music, it erases all of the music and will only put the music that you want on the phone, content that you manually drag over to it. See if this support document helps you out. http://support.apple.com/kb/HT1535

Dates coming from web service

Hi,
I'm currently trying to consume in VC a CAF Application Service exposed as a Web Service. I'm able to retrieve what I want but I have a problem with dates format.
The web service returns dates in the following format: YYYY-MM-DDTHH:NN:SS
When I test my data service in VC it works fine. When I run my iview, VC swap the month and the day and compute the new date...
It's not just a problem of formatting with DVAL and DSTR because the date is already computed.
Example:
Date returned from web service: 2007-09-21T00:00:01
Date returned from test data service in VC: 21.09.2007
Date returned at runtime: 09.09.2008
VC understand 21.09.2007 not like DD.MM.YYYY but like MM.DD.YYYY so 21.09.2007 becomes 09.09.2008
I also tried to check on the server Regional and Language option but it doesn't come from there.
Have you ever faced this problem?
Thx

Hi,
It is a Web Service generated by NWDS (to expose my CAF Application Service)and deployed on the server.
The url si like http://<hostname>:<port>/mywebservice/Config1?wsdl
The Web Service runs correctly.
When I call a method of my web service to retrieve a list of objects (CAF Entity Services) and their attributes, it returns attributes of type String and Dates of type 'java.util.GregorianCalendar'.
It seems that VC doesn't correctly understand this type of Date at runtime
Regards,
Thomas

TS2529 iTunes was unable to load data class information from Sync Services. Reconnect or try again later is the error message I am getting when i connect my iphone 4 to my windows based computer. Any help out there?

iTunes was unable to load data class information from Sync Services. Reconnect or try again later. This is the message when I try to connect my iphone 4 to my computer. If anyone could help me with this, I would appreciate it.

iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591

I keep getting this error message: ITunes was unable to load data class information from Synch Services. Reconnect or try again later. What does that mean? Can I fix it? or do I have to wait for the next update?

I keep getting this error message: ITunes was unable to load data class information from Synch Services. Reconnect or try again later. What does that mean? Can I fix it? or do I have to wait for the next update?

See TS2690: iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert.
tt2

Was unable to load data class info from sync services. try again later.

Since installing the latest version of itunes (11.1.5.5) whenever I have either mine or my wife's iphones (4 and 5c, both with the latest 7.1.1) turned on and I start iTunes, I receive the error message saying that itunes was unable to load data class info from sync services. try again later.
If I leave the phones turned off and open iTunes, I am able to sync my old ipod so it appears to be an issue with the software on the phones?
I'm just not sure where to start. I've made sure that itunes has the latest version and no more updates are available.
Thanks in advance,
jamey8420

this is on a windows 7 machine, btw.

ITunes was unable to load data class information from Sync Services. Reconnect or try again later.

Ever since I upgraded to iTunes 10.4 I've been getting this dreaded message on many occasions when I try to sync my iPhone 4 or iPad 2 with my Win 7 64 bit machine. "iTunes was unable to load data class information from Sync Services. Reconnect or try again later." What happens is that local content (music, videos etc) will sync properly to my iPhone, but other content (such as Outlook information, MobileMe stuff, etc) will not.
I have uninstalled and completely purged all Apple data from my PC (including hidden files and folders under Common Files and in the Registry) and reinstalled iTunes. Yet after one or two syncs, the same problem resurfaces. The other weird part is that the Sync Services crap-out message will happen after I do a successful sync, leave the iPhone connected to the PC, and don't even touch the computer for several hours.
I've actually developed a very tedious work around that seems to restore syncing if for a short time.
- Undock/unconnect all Apple devices from the PC.
- Close iTunes, MobileMe control panel, and Safari (if you have it).
- Start Task Manager (Ctrl + Alt + Del) and shut down iTunesHelper.exe and SyncServer.exe
- Open up a Windows Explorer window (like My Computer) and under Tools, Folder Options, View, toggle on Show Hidden Files and toggle off Hide Protected Operating System FIles
- In WIndows Explorer, navigate to "C:\Users\<your name>\App Data\Roaming\Apple Computer". Rename the folder Sync Services to something else, like Sync Services_Old.
- In WIndows Explorere, navigate to "C:\Program Files (x86)\Common Files\Apple\Mobile Device Support" and double-click on AppleSyncNotifier.exe.
- Go back to your Folder Options and turn off SHow Hidden Files and toggle on Hide Protected Operationg System Files
Now you can start up iTunes again and connect your device. It should sync properly again (at least, until it doesn't once more).
Does anyone at Apple have any idea about this error or a solution?

I actually spent a fair amount of time on the phone with a senior Apple tech last week. He directed me to this topic:
http://support.apple.com/kb/HT1923?viewlocale=en_US
It's important that you go through the steps EXACTLY as described here and in the proper order. Also make sure MobileMe control panel is uninstalled (if you have it).
Interestingly, when I went through this procedure and then reinstalled iTunes 10.4 64-bit (didn't do MobileMe or Safari at this stage, but QT is automatically installed) everything worked perfectly. The aforementioned error messages disappeared and all is working flawlessly, as it should.
I hope my expereince will help! Give it a try.

Migration from Data Services 3.2 - Data Services 4.0 document

Similar Messages

Maybe you are looking for