Migration from EDI Manager to XI

Hi,
I am new on XI and would be soon starting on a new project for implementing XI and migration of existing TNT interfaces from EDI Manager to XI.
I need help on following areas :
1. Any sample Q&A DB doc is available for XI?
2. Any help on the road map to be followed.
Thanks & Regards,
Puneet

Hi,
In my opinion you can find everything in quite nice help.
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
regards,
wojtek

Similar Messages

Migrating from Call Manager 8.5.1 to HCS

moving to HCS and apparently there is no configuration migration utility so the vendor has to type it all in. That seems strange to me so I am asking if any has ever heard of a way to get my Call Manager & Unity 8.5.1 configuration into HCS without having to type it all in again ?

No problem. HCS typically uses VOSS for multi-customer CUCM management, and that tool accepts data in Excel format. Just perform a BAT Export on your CUCM and Unity information and send it on, and the vendor can manipulate the data as needed without retyping. I've done some HCS projects, and I depended on the Excel data and BAT for importing customer information.
GL!
-chris

How to migrate from BE6000 to Communications Manager

Dear forum members,
first of all, I'am tired. I have been on a long journey from the day we bought our Cisco Unified Communication system until now.
Technically everything worked just fine, right from the beginning until now. But starting from the first day, I had several huge
issues with our Cisco reseller (Deutsche Telekom/T-Systems).
It all started with the fact, that all hardware related contracts and services were SmartNet Services and added directly to our company account.
All software related services were booked as "Shared Services". So we were the rightfull owner of the licenses but our reseller had to migrate/issue all tickets, licensing requests and so on.
It took us (me and our reseller) over a year to set these things "right".
Right now, everything (hardware and software related services, licenses, ...) are bound to our Cisco account. We can open TAC cases, download software/firmware and so on.
Last week, we migrated successfully from Call Manager 8.6.5 to 10.0. So I was really happy to see, that everything worked fine (I could migrate my licenses, download the software, ...).
I thought, "Hey, finally eveything works as expected..."
I was wrong, so wrong...
What happend? I tell you what happend...
During the migration, we had to move all our servers (CUCM, CUC & CUPS) from our Cisco C200 M2 Server to our Dell VMware cluster, because the C200 M2 is (as far as I know) not supported anymore for BE6000 10.x and we didn't wand to buy a new C220 M3 server.
Due to the fact, that the BE6000 is only supported on that hardware, we decided to migrate our BE6000 to a Cisco Unified Communications Manager.
Our reseller told me, that Cisco Unified Communications Manager is supported on third party hardware (if the hardware meets certain requirements, like processors and so on) and due to the fact that we only use CUCM, CUC & CUPS there would be no difference for us when it comes to features.
So I said: Great, let's do that. And when you are doing that, can you please order us a license for a collab edge gateway (the thing that enables Jabber to proxy through the firewall without the need of a vpn tunnel).
And that was the point when our communication stucked...
Since that mail, I don't get any response from our reseller regarding this two tasks. They told me, that I can do that myself. I tried that and searched all cisco portals and then opended a TAC case.
The TAC team told me, that our reseller had to file a sales order (is that right?) and send me back to them.
Right now, I'am trapped between Cisco and my reseller and I'am really tired. Can someone please tell me what I can do/have to do to patch things up?
Kind regards,
René

DRS from your current server which is using the 6K OVAs, into your dell server which should NOT be using the 6K OVAS, but any of the other non-6K options you have.
I assume you've already verified your server is supported under 3rd party spec guidelines???
But, that's all it takes to move from a 6K into an enterprise CUCM, or the other way around as well.

Cash Management after migration from 10.7 to 11i

Hi All,
We migrated from 10.7 to 11.5.5.
In 10.7 we used to clear Payments using AP. We are not using accounting for clearing.
The status of the Payment after clearing will be 'Cleared But Unaccounted'.
In 11i, we setup the Cash Management. We are planning to use 'Reconciliation'.
Now, in 11i, I don't want the old data to be shown as 'Available for Reconciliation',
since, they are already cleared in 10.7.
Can any one suggest me on this.
In the same way, the old JVs in GL also should not appear as Available
for reconciliation.
Appreciate your help in this.
Regds,
Hari

Hi,
How to migrate from earlier versions to 11i ? Check these links :
http://www.oracle.com/technology/applications/upgrade/index.html
Warm Regards
Vinod Subramanian

Virtual Machine Manager 2012 R2 migrate from standalone to cluster - no starting

Hello,
we have migrated our Virtual Machine Manager 2012 R2 UR1 installatin from a standalone machine to a clustered version.
But now the cluster instance won't startup.
- uninstall the standalone virtual machine manager 2012 with the retain database option.
- created failover cluster
- installed vmm into cluster and pointed to existing database.
- added second node
The error we now get is out of the report.txt:
------------------- Error Report -------------------
Error report created 17.04.2014 19:38:57
CLR is not terminating
--------------- Bucketing Parameters ---------------
EventType=VMM20
P1(appName)=vmmservice.exe
P2(appVersion)=3.2.7620.0
P3(assemblyName)=ImgLibEngine.dll
P4(assemblyVer)=3.2.7620.0
P5(methodName)=Microsoft.VirtualManager.DB.Adhc.StoredCertificate.CacheVMConnectCertificate
P6(exceptionType)=System.AggregateException
P7(callstackHash)=7b6a
SCVMM Version=3.2.7620.0
SCVMM flavor=C-buddy-RTL-AMD64
Default Assembly Version=3.2.7620.0
Executable Name=vmmservice.exe
Executable Version=3.2.7510.0
Base Exception Target Site=140721289766296
Base Exception Assembly name=mscorlib.dll
Base Exception Method Name=System.Security.Cryptography.CryptographicException.ThrowCryptographicException
Exception Message=One or more errors occurred.
EIP=0x00007ffc469c43c8
Build bit-size=64
------------ exceptionObject.ToString() ------------
System.AggregateException: One or more errors occurred. ---> System.Security.Cryptography.CryptographicException: The specified network password is not correct.
at System.Security.Cryptography.CryptographicException.ThrowCryptographicException(Int32 hr)
at System.Security.Cryptography.X509Certificates.X509Utils._LoadCertFromBlob(Byte[] rawData, IntPtr password, UInt32 dwFlags, Boolean persistKeySet, SafeCertContextHandle& pCertCtx)
at System.Security.Cryptography.X509Certificates.X509Certificate.LoadCertificateFromBlob(Byte[] rawData, Object password, X509KeyStorageFlags keyStorageFlags)
at System.Security.Cryptography.X509Certificates.X509Certificate2..ctor(Byte[] rawData, SecureString password, X509KeyStorageFlags keyStorageFlags)
at Microsoft.VirtualManager.DB.Adhc.StoredCertificate.CacheVMConnectCertificate(StoredCertificate cert)
at Microsoft.VirtualManager.DB.Adhc.StoredCertificate.ImportCertificates(List`1 certificates, ReportCertImportFailure ReportImportFailure)
at Microsoft.VirtualManager.DB.Adhc.StoredCertificate.ImportAllCertificates(ReportCertImportFailure ReportImportFailure)
at Microsoft.VirtualManager.Engine.VirtualManagerService.LoadCertificates()
at Microsoft.VirtualManager.Engine.VirtualManagerService.TimeStartupMethod(String description, TimedStartupMethod methodToTime)
at System.Threading.Tasks.Task.Execute()
--- End of inner exception stack trace ---
at System.Threading.Tasks.Task.Wait(Int32 millisecondsTimeout, CancellationToken cancellationToken)
at Microsoft.VirtualManager.Engine.VirtualManagerService.WaitForStartupTasks()
at Microsoft.VirtualManager.Engine.VirtualManagerService.TimeStartupMethod(String description, TimedStartupMethod methodToTime)
at Microsoft.VirtualManager.Engine.VirtualManagerService.ExecuteRealEngineStartup()
at Microsoft.VirtualManager.Engine.VirtualManagerService.TryStart(Object stateInfo)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.TimerQueueTimer.CallCallback()
at System.Threading.TimerQueueTimer.Fire()
at System.Threading.TimerQueue.FireNextTimers()
---> (Inner Exception #0) System.Security.Cryptography.CryptographicException: The specified network password is not correct.
at System.Security.Cryptography.CryptographicException.ThrowCryptographicException(Int32 hr)
at System.Security.Cryptography.X509Certificates.X509Utils._LoadCertFromBlob(Byte[] rawData, IntPtr password, UInt32 dwFlags, Boolean persistKeySet, SafeCertContextHandle& pCertCtx)
at System.Security.Cryptography.X509Certificates.X509Certificate.LoadCertificateFromBlob(Byte[] rawData, Object password, X509KeyStorageFlags keyStorageFlags)
at System.Security.Cryptography.X509Certificates.X509Certificate2..ctor(Byte[] rawData, SecureString password, X509KeyStorageFlags keyStorageFlags)
at Microsoft.VirtualManager.DB.Adhc.StoredCertificate.CacheVMConnectCertificate(StoredCertificate cert)
at Microsoft.VirtualManager.DB.Adhc.StoredCertificate.ImportCertificates(List`1 certificates, ReportCertImportFailure ReportImportFailure)
at Microsoft.VirtualManager.DB.Adhc.StoredCertificate.ImportAllCertificates(ReportCertImportFailure ReportImportFailure)
at Microsoft.VirtualManager.Engine.VirtualManagerService.LoadCertificates()
at Microsoft.VirtualManager.Engine.VirtualManagerService.TimeStartupMethod(String description, TimedStartupMethod methodToTime)
at System.Threading.Tasks.Task.Execute()<---
Maybe someone has an idea where to look at.
Best Regards,
Marcus
Marcus Lehmann

Hi,
nope, we solved it.
It seems that this behavior occurs only under special circumstances.
Scenario is:
1. RDP Gateway connection to our Hyper-V Hosts (We need it for our Windows Azure Pack installation). A certificate is needed to encrypt the connection between RDPGW and Hyper-V host. This certificate is distributed by the VMM to the Hyper-V Hosts with the
private key.
2. Migrating from standalone installation to High Availability therefore migrating from DPAPI to DKM
It looks like that the key or the password to unencrypt the private key, which is stored in the database, is itself stored in the DPAI/DKM.
So when you try to get the migrated Service online the error report in my first post is generated.
What we did was fiddeling around in the database. Make sure you have a backup !!
You need two tables:
tbl_ADHC_Host
tbl_VMM_CertificateStore
1. Go to the table "tbl_ADHC_Host" and edit the key fk_ADHC_Host_VMM_CertificateStore and set "Enfore Foreign Key Constraint" to "No".
2. get the value "VMConnectCertficateID" from the table "tbl_ADHC_Host"
3. Go to the table "tbl_VMM_CertificateStore" and delete the Certficate with the value which equals the "VMConnectCertificateID". Note: Corresponding Certificate in the CErtificatestore table should have something in the column "PrivatekeyPassword"
and an ObjectType of 6.
4. The service should now start and you can reconfigure the certificate used for the encryption between your RDPGW and Hyper-V Hosts, like you did before.
5. Go to the table "tbl_ADHC_Host" and edit the key fk_ADHC_Host_VMM_CertificateStore and set "Enfore Foreign Key Constraint" back to "Yes".
Hope that helps. ;)
Best Regards,
Marcus
Marcus Lehmann

Migrating from Marimba 8.1 to Configuration Manager 2012 R2

Good morning all,
I have been tasked with architecting a migration from Marimba 8.1 to Configuration Manager 2012 R2 and I noticed that there is almost no material available in the web about this, can someone provide whatever insight information possible?
Thanks in advanced for your help on this matter
Ed
edthefixer

Jeff,
I agree with you on some of your thoughts, I should've describe the situation better.... I am not trying to migrate anything from Marimba, I am architecting an entire ConfigMgr 2012 R2 infrastructure altogether, what I am trying to do is (because I have
to rationalize and normalize their DSL) see if I can salvage any applications and some level of their customization to convert them into ConfigMgr applications.... they have about 3000 apps and not all of them are in .msi format, Marimba uses a very strange
folder format for this.... trying to see if anyone out there has dealt with this before.
Ed
edthefixer

Migration from SIM(Sun Identity Manager) to Oracle IDM

hi
Anyone having any knowledge on Migration from SIM(Sun Identity Manager) to Oracle IDM. Please share the knowledge/doc/links. Would helps me lot.
Thanks
.\idm

Hi,
Basic migration information can be found here. http://www.oracle.com/us/products/middleware/identity-management/upgrade/index.html
I believe more detailed information will be available soon.

Migration from Siteminder DMS to Sun Access Manager

Hi
We are working on a project that involves migration of Siteminder and SiteMinder-DMS to Sun Access Manager.
My concerns are
1. Do I need any changes to the Directory Tree of the LDAP..?
2. How do I migrate the policies..>
3. Does Sun have the exact quivalents(the same coarse grained APIs) as Siteminder-DMS..?
4. Heard of a tool that can do the migration from Siteminder to Sun Access Manager. How good is the tool and what in its scope and what are its limitations.?
Thnx
siva

I currently reviewing migrating from SiteMinder to Sun Access Manager. I have the same issues as you have had. I would greatly appreciate any feedback on any of these issues. My email address is [email protected] if you prefer to email me directly.

Migrating from antique 10.3 server to 10.6 managed environment. tips?

Hi, I'm migrating an old 10.3 Server to 10.6 (new hardware) and I was wondering if anyone had any tips or warnings before we start this process.
10.3 server only has following services active: AFP, Mail, OD, Web. It's important to note that users simply mount AFP directories. There is no single-signon at play or Networked/Mobile Home folders.
on 10.6 we'd like to get these basic services up and running as quickly as possible then switch users to Network/Mobile Home folders.
I'm not expecting (nor do even think it's possible) to "migrate" anything from 10.3 to 10.6. Because of this I plan to archive all email that is stored on server (cyrus 10.3) to each user's local Mail.app (10.6).
The new server will be set-up from scratch and all active current users will be recreated as well as the file system which is not too complex. Share Points will be copied to the new server and permissions adjusted recursively.
My biggest areas of concern are *1) how best to handle migration of mail on server?* Which I think will be simplest if each user archives locally and then we switch services to the new 10.6 host and, basically, abandon the 10.3 cyrus mail stores. BUT, that gives rise to my next, larger, concern: *2) how then to migrate current 10.6 clients to managed Networked/Mobile clients?* Especially when considering the 10.6 clients have *local users* logging into *local accounts* that were previously accessing the 10.3 server for mail & AFP.
Any/all tips or experiences with this would be helpful!
Thanks!

You may want to take a look here http://wiki.dovecot.org/Migration/Cyrus and see if any of the scripts will suit your needs. Dovecot mail boxes match the "Generated UID" that is viewable in the Inspector portion of the Workgroup Manager app for each user account.
When we moved from 10.3.9 to 10.6 it was determined that to avoid future complications new user and group accounts with the same UID would be created on the new server.
Then it was just a matter of transferring data to the appropriate directories and making sure that the data had the correct permissions. If you are moving from local homes to network homes, you can copy any required items from the local machine to the newly created network home. Users downloaded their mail to their local mail database via POP prior to the move. Since SquirrelMail is still used as webmail it may be possible to migrate from the previous version but you will want to know where the data lives on both the new and old server prior to the move. Check the SquirrelMail website for further information on migration between versions.

Upgrade Call Manager from 8.5(1) to 10.5(1) and migrate from MCS to UCS...

We are upgrading UCM from 8.5(1) to 10.5(1) and migrating from MCS to UCS. We used UCM 8.5 OVA (7500 user) and migrated to UCS.
Once migrated to UCS we upgraded UCM to 10.5(1). We wanted to use OVA to accommodate 10,000 users, hence took backup of 10.5(1) cluster and installed new servers with new 10.5(1) OVA (10,000 users).
While doing DRS restore, system we were not able to perform a restore. It seems UCM is not recognizing the XML file. It is strange as we took the back from UCM 10.5(1) and trying to restore same version, only difference is upgrade was done with 7500 user OVA and we are now trying to install 10,000 user OVA.
Has anyone run into similar issue? any help will be great.
Thank You.

This thread is 5 months old but doesn't seem resolved...
I ran into this same scenario last week. Was using the same SFTP server for backups and restores during migration from 7.1(5) to 10.5 and during final rebuild/restore of the "to-be" production 10.5 Publisher, the DRS server was unresponsive and blamed the Master Agent or SFTP server. I had restarted Master and Local agent repeatedly, and regenerated ipsec certs to no avail.
TAC suggested I try a different SFTP server (which I already had, with the same files), and try deleting the .xml files that were included with the backup (drfComponent.xml and processhost.xml). I installed TitanFTP, per TAC's recommendation, deleted the processhost.xml file, regenerated the ipsec certificate one last time, restarted DRF Master, and then DRF Agent, and was able to start a DRS Restore.
Try the above process if you're still having issues.

Creation of domain issues - migration from weblogic 10.3.0 to 10.3.5 versio

Hello,
i would like to kindly ask for a help with following issue:
Basically we are migrating from the 10.3.0 to the 10.3.5 version. We are building the domain using the template in "silent mode". And when i try to create the domain with new weblogic 10.3.5 im getting some errors.
The command to run the creation of the domain is following:
${WL_HOME}/common/bin/config.sh -mode=silent -silent_script=${SILENT_SCRIPT} -log=${WLLOGFILE} >> ${LOGFILE} 2>&1
returnCode=$?
SILENT_SCRIPT contains following commands:
read template from "/local/wg372/BM/appl/config/NEW_DOMAIN_CONFIGURED.jar";
write domain to "/local/wg372/BM/appl/BmDomain";
set OverwriteDomain "true";
close template;
When i setup new env(solaris) with weblogic 10.3.5 im getting following error when the silent_script command (*write domain to "/local/wg372/BM/appl/BmDomain";*) is executed:
2011-07-18 16:53:00,427 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - succeed: read template from "/local/wg372/BM/appl/config/NEW_DOMAIN_CONFIGURED.jar"
2011-07-18 16:53:00,427 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - write Domain to "/local/wg372/BM/appl/BmDomain"
2011-07-18 16:53:00,505 ERROR [runScript] com.oracle.cie.wizard.domain.silent.tasks.RunScriptTask - There was an error executing the script: /local/wg372/BM/appl/installer/silent_script
java.lang.NullPointerException
     at com.oracle.cie.domain.security.SecurityGenerateLDIFT.buildSecurityInfo(SecurityGenerateLDIFT.java:460)
     at com.oracle.cie.domain.security.SecurityGenerateLDIFT.<init>(SecurityGenerateLDIFT.java:119)
     at com.oracle.cie.domain.script.ScriptExecutor.writeDomain(ScriptExecutor.java:718)
     at com.oracle.cie.domain.script.ScriptParserClassic$StateMachine.processWrite(ScriptParserClassic.java:573)
     at com.oracle.cie.domain.script.ScriptParserClassic$StateMachine.execute(ScriptParserClassic.java:429)
     at com.oracle.cie.domain.script.ScriptParserClassic.parseAndRun(ScriptParserClassic.java:148)
     at com.oracle.cie.domain.script.ScriptParserClassic.doExecute(ScriptParserClassic.java:110)
     at com.oracle.cie.domain.script.ScriptParser.execute(ScriptParser.java:72)
     at com.oracle.cie.domain.script.ScriptParser.execute(ScriptParser.java:35)
     at com.oracle.cie.wizard.domain.helpers.Executor.runSilentScript(Executor.java:68)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.oracle.cie.wizard.domain.silent.tasks.RunScriptTask.runScriptWithExecutor(RunScriptTask.java:551)
     at com.oracle.cie.wizard.domain.silent.tasks.RunScriptTask.execute(RunScriptTask.java:335)
     at com.oracle.cie.wizard.silent.tasks.AbstractSilentTask.run(AbstractSilentTask.java:28)
     at java.lang.Thread.run(Thread.java:662)
In Windows env im getting following error:
create.domain:
[exec] -mode="silent" -silent_script=J:/_dev/build/installer/silent_script
[exec] << read template from "J:/_dev/build/config/NEW_DOMAIN_CONFIGURED.jar"
[exec] >> succeed: read template from "J:/_dev/build/config/NEW_DOMAIN_CONFIGURED.jar"
[exec] << write Domain to "J:/_dev/build/BmDomain"
[exec] CFGFWK-60550: Script execution aborted. The script may contain an error.
[exec] null
CFGFWK-60550: - doc says
CFGFWK-60550: Script execution aborted. The script may contain an error.
Cause:
Action:
Level: 1
Type: ERROR
Impact: Configuration
I tried to google for this issue, look into the weblogic documentation but with no luck.
So i would like to kindly ask, if anyone of you perhaps could give me a hint/advise with this problem.
Thanks in advance.

Hi,
thanks for the reply but im not sure if we are talking about the same thing. What i need is to upgrade the weblogic "DOMAIN" not the weblogic installation itself.
Anyway,
after some googling and testing im again stucked with another issue:
1. First i have created the old doman (10.3.0)
2. Then i have tested the domain with the new weblogic version 10.3.5 - as it should be (and is) compatible within those 2 versions
---> worked fine
3. Then via offline WLST(of weblogic 10.3.5) i have managed to create new template with command writeTemplate(nameOfTemplate.jar)
4. But when i try to create the new domain with the new template via WLST(of weblogic 10.3.5) im again stucked (im able to read the template in wlst but not able to writeDomain ) - error:
wls:/offline> readTemplate('/home/wg372/tmp/new_template.jar')
wls:/offline/BmDomain>writeDomain('/home/wg372/tmp/new_domain')
Error: writeDomain() failed. Do dumpStack() to see details.
wls:/offline/BmDomain>dumpStack()
com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.ScriptException: The application location must have write permission.
at com.oracle.cie.domain.script.jython.CommandExceptionHandler.handleException(CommandExceptionHandler.java:51)
at com.oracle.cie.domain.script.jython.WLScriptContext.handleException(WLScriptContext.java:1538)
at com.oracle.cie.domain.script.jython.WLScriptContext.writeDomain(WLScriptContext.java:803)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyInstance.invoke(Unknown Source)
at org.python.pycode._pyx3.writeDomain$15(/var/tmp/WLSTOfflineIni6651397525640719781.py:71)
at org.python.pycode._pyx3.call_function(/var/tmp/WLSTOfflineIni6651397525640719781.py)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.pycode._pyx24.f$0(<console>:1)
at org.python.pycode._pyx24.call_function(<console>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyCode.call(Unknown Source)
at org.python.core.Py.runCode(Unknown Source)
at org.python.core.Py.exec(Unknown Source)
at org.python.util.PythonInterpreter.exec(Unknown Source)
at org.python.util.InteractiveInterpreter.runcode(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at weblogic.management.scripting.WLST.main(WLST.java:173)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.WLST.main(WLST.java:29)
Caused by: com.oracle.cie.domain.script.ScriptException: The application location must have write permission.
at com.oracle.cie.domain.script.ScriptExecutor.writeDomain(ScriptExecutor.java:757)
at com.oracle.cie.domain.script.jython.WLScriptContext.writeDomain(WLScriptContext.java:795)
... 29 more
I tried to have a look around for the "The application location must have write permission." problem but again with no luck.
Furthemore when i try to do the same with old domain template, with old version of WLST (of weblogic 10.3.0), i have no problems with creating of the domain.
Any ideas?
Ill keep you updated :-)

Migrating from SBS 2011 to Windows Server 2012R2 Standard with 365

Im looking to move SBS 2011 to Server 2012R2 standard and with a 365 migration as well.
Im thinking
BPA for AD (health check)
Add the Server2012R2 as a DC
Ensure replication
Move DHCP
Change DNS
Now this is where I get lost, now Im lost to use either dirsync or add essentials service, I have gone for standard and 30 cals with the option as I have 28 users and the essentials service would make everything quite nice for remote access and backups
etc.... however I don't know whether to just use dirsync with password replication instead ?
Currently Im aiming towards getting the dc up and running then enabling essentials on the dc but I dont know how it will effect SBS and having essentials on the same network and sync'ing people to the cloud ? So Should I use DirSync on a different server
instead to sync up to azure ?
Finally with 365 I have only ever done a migration involving an export of pst's from an exchange box and then on a new domain with new pc's and reimport the pst's on the user accounts in outlook.
However I have read when migrating to 365 was using exchange 2010 there was a application
to move everything across however you needed an ssl cert iirc ? so I dont know how it works now since the nice new dashboard upgrade (assuming the tool has been updated like dirsync)
along with the above how does AD now know where exahcnge if you use the migration app with an ssl cert and is it a case of still running the 365 config tool to configure each user to look at their mail in the
cloud ? Also is it a good idea to enable essentials from the start of the 2012r2 dc for replication top 365 or to use dirsync ?
then finally when replications is all good start transferring the FSMO roles over to the new DC and demote and remove the SBS server
I have seen (below) but i dont think it covers this scenario and I cant be the only person in this situation =\ ?
http://blogs.technet.com/b/infratalks/archive/2012/09/07/transition-from-small-business-server-to-standard-windows-server.aspx
http://social.technet.microsoft.com/Forums/en-US/f552ef12-07a9-4f7a-bf5e-24500c3e1dc3/migrate-sbs-2011-to-server-2012-standard?forum=smallbusinessserver
http://social.technet.microsoft.com/Forums/en-US/e1d4b09f-8857-4ef6-9a80-6a906e76b688/how-to-migrate-sbs-2011-to-standard-2012-server?forum=smallbusinessserver

Hi,
Would you please let us know current situation of this issue? If any update, please feel free to let us know.
à
Currently Im aiming towards getting the dc up and running then enabling essentials on the dc but I dont know how it will effect SBS and having essentials on the same network
and sync'ing people to the cloud?
I’m a little confused with the description. Did you mean that set up DC (Windows Server 2012 Standard) and
then install the Windows Server Essentials Experience role? If so, when you migrate, please refer to the article:
Migrate from Previous Versions to Windows Server 2012 R2 Essentials or Windows Server Essentials Experience
Regarding to migrate Exchange to Office 365, please refer to following articles.
Migrate
All Mailboxes to the Cloud with a Cutover Exchange Migration
Step-By-Step:
Migrating from Exchange 2007 to Office 365
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
Meanwhile, there is an additional article that you can refer to:
Manage Office 365 in Windows Server Essentials. It may help us to understand Office 365 in Server Essentials clearly.
If anything I misunderstand, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu

I was migrating from a 3gs to the 4s. Big mistake. Have lost contacts and access to music and apps.

I was migrating from a 3gs to the 4s. Having never upgraded the IOS before, I thought that I should do that before handed the phone down to my daughter to replace her broken 3g. Big mistake. Even using Google sync for my contacts, following instruction from the Google webpage (ambiguous: cancel or not when error message is displayed?) the contacts did not sync to gmail. iTunes says it will sync contacts, but doesn't from the phone, only from the few that were in my old Gmail account. The iCloud set up asks for email and a new password- not specifying that you should use your old email and password for your old iTunes account or your phone will be instantly locked out of those apps and tunes stored there. The web info says you can't merge accounts or passwords, so, I bet I have to cancel the new set up and start over with the old password if it will even let me. I've spent 8 hrs reading, syncing, et c., on this! It will be a long time before I casually buy a new phone from them! I wonder how much time it will take to switch from the 3GS to the 4S? I now have a 3GS without contacts, no way to get the data from those files back, and can't get the apps to it or the 4S until Apple support helps fix the double identity problem.
Considering that I had verbal instructions from the Apple store prior to the IOS upgrade, reviewed all the details on line, I think this process is woefully lacking in clarity and transparency. The local ATT branch offered nothing except backing up to avoid loss of contacts if both phones were taken to the store, but not any help with the IOS or iTunes content. Cable internet for the 3GS backup and IOS 5 upgrade seemed to take about 2 hours. At least calender, notes, etc. were done correctly and 2500 picture and videos were not removed.

After the last post,I went to the local ATT for some feedback. The manager there, Stephen, was helpful and spent a long time, even after i had gotten the abbreviated list of contacts I had constructed from the 3GS to the 4S by an iTunes sync with the correct options selected. This however, would not sync notes. I took screen pix of my many stock symbols for future reference, and got them to transfer with Bump (as photos, in case I want to refresh my memory on some of the symbols added previously). I emailed myself copies of 28 notes i did not want to lose, because the iCloud back up would not initially work. After what seemed like years, I finally was able to get it working, following repeated refusal to Merge because of "not enough space available" @5GB even though everything was turned off except contacts and calendar.
My old phone is finally backed up to the cloud after I turned off location service on new phone, and a bunch of apps and photo data showed up for the first time, as icons to be turned off on the old phone in the Manage Storage window. It said it was going to back up 8 GB of photos when the photo backup had been turned off on the prior screen. (The screws are loose, and the worm has turned on this software at Apple.)
Backup for notes, a few contacts, and calendar, over high speed wifi, took 25 minutes to complete without photos.
I have never seen anything this troublesome in the Apple OS!
You will need to set your own Apple ID and a .me email ID if you want to use the cloud. My recommendation and that of the store manager for the first time is don't back up any photos, let it erase the photo stream if it wants to. The camera roll should be ok.
Backing up to the iCloud removed all my stocks from the old phone! It wasn't supposed to. Be sure to select leave data on phone at every opportunity- even so, there they went. It did not remove contacts or calendar when backing up, though the IOS 5 upgrade had lost my years of contacts since I had not specified that they should be saved when I hit the simple sync in iTunes the first time and since Googlesync failed to connect properly for me over wifi as noted above.
All in all it appears nothing is going to clone your phone or preserve all the data through a IOS 4.x to 5 migration, though I did not do it right the first time with iTunes, and complicated matters by starting with a new ID instead of my old iTunes account and password, living in a small town, away from any Apple store, though if you can't be there at an Apple store with both phones in hand, they probably can't help much unless they walk you through each option in iTunes and you are very attentive. The store genius I saw did not do this, though I had yet to order the phone at that point.
Good Luck!
Message was edited by: richardfromel dorado

Problem with servlet after migrating from OC4J to WebLogic 10.3

I come across a problem when I was migrating from jDev 11g TP4 to production version in that step also server got changed from OC4J to webLogic.
I am running java http servlet along other jspx pages. When everything was on OC4J there was no problem whit security on this servlet ( servlet was under same authorization automatically, and I was able to create new application module on this servlet by createRootApplicationModule
) but when I changed to WebLogic 10.3 I come across a numerous problems. First one is solved i managed to put the servlet under same authorization as jspx pages by
*<servlet>*
*<servlet-name>report</servlet-name>*
*<servlet-class>path.to.class</servlet-class>*
*<security-role-ref>*
*<role-name>name</role-name>*
*<role-link>valid-users</role-link>*
*</security-role-ref>*
*</servlet>*
but when I trying to create new application module I get JBO-30003 error which is Caused by:
oracle.adf.share.security.ADFSecurityAuthenticationException: JAAS login error.
Invalid null input: name
Has anybody any idea what I am doing wrong?
Thank you for your help, Rok Kogov&scaron;ek

for example:
web.xml
<security-role>
<role-name>yourrole</role-name>
</security-role>
weblogic.xml
<security-role-assignment>
<role-name>yourrole</role-name>
<principal-name>wlsuser</principal-name > 
</security-role-assignment>

NQS ERROR:14025 NO FACT TABLE EXISTS -after migrating from 10g to 11g

NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL in all the reports after migrating from 10g to 11g ...
then we applied the patch (One-off Patch for Bug: 11850704) for the error <<NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL>>
But after applying the above the above patch we are still getting the same error.
but in the above patch instructions file - Post deployment instructions to create the Variable
Post Install Instructions:
- To revert to the 10g navigator behavior for handling conforming dimensions,
you must set the following session variable via an init block in the RPD:
NO_FORCE_TO_DETAIL_BIN=1
The default value for the above variable is 0.
- Restart all servers (Admin Server and all Managed Server(s))
but we didn’t find the process to create the specified variable and Initialization block in the RPD
Can you please suggest us how to go further.
Our questions are:

Hi
Refer the below thread.
obiee 11g non-conforming dimensions and nQSError 14025
Might be help you/
Thanks,
satya

Migration from EDI Manager to XI

Similar Messages

Maybe you are looking for