Migration from Essbase 7.5.1 to system 9 and then to 11

Hi all,
I have an immediate requirement to migrate huge essbase applications from essbase 7.5.1 to system 9.
as per my knowledge, i believe that we can migrate from 7.5.1 --->9.2.0.2--->9.3.1 or EPM 11i.
Anybody who have worked on the same please confirm.
Or if there is any ohter way to do it, please let me know.
will it be possible to migrate from 7.5.1 to 9.3.1 directly? i was able to migrate very simple applications directly from 7.5.1 to 9.3.1. I am sure there will be issues when we migrate huge applications.
Hope to get a response from u guys...
regards.,
Nishanth

Hi,
This has been covered so many times, just type Migration into the search
Here is an example of some of things returned
Re: Upgradation From 6.5 to 9.3.1
Re: Upgrading Essbase 6.5.4.2 to System 9
Re: Migrating Essbase 6.5 to 9.3.1
Re: Migration from 7.0.1 to 9.3.1
Re: Migration from version 7 to version 11
Small applications should be no different than big applications
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Migration from Essbase 7.5.1 to system 9

Hi all,
I have an immediate requirement to migrate huge essbase applications from essbase 7.5.1 to system 9.
as per my knowledge, i believe that we can migrate from 7.5.1 --->9.2.0.2--->9.3.1 or EPM 11i.
Anybody who have worked on the same please confirm.
Or if there is any ohter way to do it, please let me know.
will it be possible to migrate from 7.5.1 to 9.3.1 directly? i was able to migrate very simple applications directly from 7.5.1 to 9.3.1. I am sure there will be issues when we migrate huge applications.
Hope to get a response from u guys...
regards.,
Nishanth

Hi,
This has been covered so many times, just type Migration into the search
Here is an example of some of things returned
Re: Upgradation From 6.5 to 9.3.1
Re: Upgrading Essbase 6.5.4.2 to System 9
Re: Migrating Essbase 6.5 to 9.3.1
Re: Migration from 7.0.1 to 9.3.1
Re: Migration from version 7 to version 11
Small applications should be no different than big applications
Cheers
John
http://john-goodwin.blogspot.com/

How do I migrate from 2.8GHz C2D to i7 SSD and HHD

Hi!
My new i7 Quad-Core iMac - 256 GB SSD /1TB Serial ATA - on Saturday. Using Migration Assistant to transfer the data from 2.8GHz C2D, I found that I was short 69GB of space; MA had fixed solely on the SSD. Googled the net for solutions. I decided to try Target Disk Mode. I was reassured to see that two hard drive icons appeared on the host screen: HD and HD2. HD is the SSD and HD2 is the Serial ATA.
Apple have installed the following six folders on the i7 HD/SSD drive: Applications, Home, Library, net, System and Users. My question is this: should I simply drag the similarly named folders on my C2D onto the i7 HD and HD2 icons, selecting, for instance, the Applications folder for the SSD and the Pictures/ Movies for the ATA? It this is OK, which Users /Library /System folders would be best suited to the SSD? I have a separate C2D folder for AppleWorks User Data; which drive should it be copied onto?
If the data has to be transferred in this way, won't there be two Applications folders, two Library folders, ... etc on the new computer?
Regards,
Declan.

I tried to disconnect everything from the motherboard including the backup battary, and then tried again after reconnecting everything to the motherboard with the old cpu, but the fsb is still locked to 133-233 instead of the 100-200. I guess something happened to the mainboard when I choosed load default values on startup when I tried with the new Pentium 4 2.8GHz Northood with 400 fsb and L2 cache of 512kb. I know that is supported as mentioned in this msi page http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=35&kind=1
I guess I have to try to find a new mainboard then, that fits my cpu, graphic card and memories. The graphic card is by the way a Geforce 4 5700LE with 256MB RAM if anyone has any suggestions.
...and no I can not flash the Bios since the system is not stable with the fsb at 133 instead of 100.

Can I download a file in different sessions or should it be in a single session? In other words can I pause the download of a file, shutdown/restart my system and then resume download from where I left off? Or will it start from the very beginning?

Can I download a file in different sessions or should it be in a single session? In other words can I pause the download of a file, shutdown/restart my system and then resume download from where I left off? Or will it start from the very beginning?

If a server supports resuming downloads then the download should continue where it left off.<br />
You can test that by simple starting a large download and wait a minute or so before pausing it.<br />
Then you can close and restart Firefox and see if resuming works.
You can set the pref browser.download.manager.quitBehavior to 2 on the about:config page.<br />
That will make Firefox ask for confirmation if you want to cancel the download if you close Firefox.
See:
* http://kb.mozillazine.org/browser.download.manager.quitBehavior

Migration from 2003 - 2010, OAB errors on client, and OAB virtual directory does not contain any files.

Migration from 2003 - 2010, OAB errors on client, and OAB virtual directory does not contain any files.

Hi,
Please re-create the Outlook profile to have a try. If the issue persists, we can do the further checks in Exchange server.
Please make sure you have changed the OAB generation server to Exchange 2010 and enable Web distribution on the Exchange 2010 Client Access server:
Move-OfflineAddressBook "Default Offline Address List" -Server <MBX2010>
If all configurations are correct, please check whether there is any folder in the following path in Exchange sever 2010:
a. OAB generation in Mailbox:
\\Program Files\Microsoft\Exchange Server\V14\ExchangeOAB
b. OAB distribution in Client Access:
\\Program Files\Microsoft\Exchange Server\V14\ClientAccess\OAB
Thanks,
Winnie Liang
TechNet Community Support

Trying to install the newest version of itunes on my pc and am getting "program cant start because msvcr80.dll is missing from your computer" reinstalling doesnt work. and then it says error 7 (windows error 126)

trying to install the newest version of itunes on my pc and am getting "program cant start because msvcr80.dll is missing from your computer" reinstalling doesnt work. and then it says error 7 (windows error 126). Any help would be appreciated. Using Windows 7 enterprise on an hp Z600

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

HT1848 How do I download content and apps from the iTunes Store to my computer, and then sync them to iPhone

How do I download content and apps from the iTunes Store to my computer, and then sync them to iPhone

Nevermind I got it
I went to itunes on my iphone and clicked on purchesed and then went to not on this iphone and downloaded it
Thank you all so much for you time and sorry im new to this

Getting Data from SAP ECC & BI to Crystal Reports and then Broadcasting.

Hi,
I need to get the data from SAP ECC & BI to Crystal reports and then after formating data in Crystal reports, my requierment is to send via email (Broadcasting). Is there any option to Broadcast from Crystal reports?
I read Ingo Hilgefort blogs, but I need in detail steps such as to verify Integration Kit is installed or not and also how to create connections in between SAP ECC and Crystal. What are the Security setups(User IDs and Authorizations) involved?
What is best option for email/broadcasting for Crystal Reports?
Your help is appreciated.
Thanks.
SVK.

Hi,
I would suggest you then start with the installation and user guide fr the SAP Integration Kit.
Ingo

Aperture does not recognize that there are images to be imported on an SD card. My workaround is to copy the images from the ST card to a folder and then import the images from the folder. Aperture also imports incredibly slowly after the update to 3.4

Aperture does not recognize that there are images to be imported on an SD card. My workaround is to copy the images from the SD card to a folder and then import the images from the folder. Aperture also imports incredibly slowly after the update to 3.4

Check your Import settings in the Import Panel, i.e. all that might exclude the image type you want to import:
If you did not exclude any file types, and still Aperture will not import, remove your ImageCapture preferences fro your user library:
To remove the image capture preferences:
If Aperture is running, quit Aperture, and log off and on again.
Open your user library from the Finder's Go menu: Hit Command Shift G (⌘⇧G) and then type in: ~/Library/Preferences/ then hit return.
In the window that opens remove "com.apple.ImageCapture.plist"
and look into the subfolder "ByHost": if there are files named com.apple.ImageCapture something .plist remove them too.
then try again.
And if that still does not help, remove the Aperture preferences as well:
~/Library/Preferences/aperture.plist
Regards
Léonie
P.S. in MacOS Lion and later the user library ~/Library is hidden by default.
You can reveal it also from the Finder's "Go" menu:
Finder > Go, then hold down the options ⌥ key, until the Library appears in the drop-down menu, select it and open the Library folder. Then go to the "Preferences".

Have an iPod touch 4th gen. It is completely charged, but once I disconnect from a power source it shuts down and then the apple logo just keeps reappearing. I have restored via iTunes and reset all the settings. Any suggestions?

Have an iPod touch 4th gen. It is completely charged, but once I disconnect from a power source it shuts down and then the apple logo just keeps reappearing. I have restored via iTunes and reset all the settings. Any suggestions?

If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

Why when I export photos from I photo to the desk top , and then to a CD they end up as alis and some are not really there?

Why when I export photos from I photo to the desk top , and then to a CD they end up as alis and some are not really there?

Why? Because of something you are doing wrong - however unless you actually tell us what you are doing - and what version of iPhoto you have - and any other detail that might help no one can even gess.
Exactly how are you exporting? Are the photos successfully exported to the desktop? How are you moving to the CD? why do you think they are not there?
LN

Direct X is installed but could not be initialized. Please reboot your system and then relaunch Elements Organizer. Editor works but not Organizer.

I have a windows PC with windows 8.1 and have had it for 13 months. I have PE 9 installed and have been using it without a single problem when out of the blue I can't open the Organizer. I can open the editor but not the organizer. When I attempt to open it I get this...Direct x is installed but can't be initiated. Please reboot your system and then relaunch Elements organizer. Obviously, I have done this many, many times. I have had two computer experts look through my computer for a total of 13 hours and neither one of them knows what the problem is. One of them thought the issue might be bad graphics driver but the other computer guy thought that was definitely not it.
The second technician thought it was a corrupt file somewhere in the catalog. We downloaded a trial version of PE 12 and tried to open that and it won't open either. Seriously at my wits end here. I'm willing to pay to have this fixed. I've already spent hundreds of dollars to no avail. Rest of the computer works flawlessly.
We have done everything that has been posted here on this topic without success. Rebuild the thumbnail cache, repair the catalog via the catalog manager, gone in and made sure that Direct x was actually turned on...it is! I'm truly expecting a miracle as this is basically my last resort. I have over 30,000 images and just don't know what to do. Clearly installiung a new program is not the answer as PE 12 trial version came up with the same issue. HELP!!!!!!!!!!!!!!!....PLEASE!!!!!!!!!

Hi,
Please try out the instructions mentioned by Vaishali in forum thread:
https://forums.adobe.com/thread/1388269?tstart=0
Thanks,
Anwesha

I download songs from my dropbox to my macbook pro and then upload them to my updated iTunes. iTunes plays them in entirety, but when i update my iTunes match, my iPhone and iPad skip many of the songs and albums. Why? I have tried everything.

I download songs from my dropbox to my macbook pro and then upload them to my updated iTunes. iTunes plays them in entirety, but when i update my iTunes match, my iPhone and iPad skip many of the songs and albums. Why? I have tried everything.

If you have manually manage set, you do not sync.
If you want to sync, select the content desired to sync and sync.
This is all covered in the User's Guide.

Can rent a movie from the iTunes store on my computer, and then stream it to my apple TV (2nd gen)?

Can rent a movie from the iTunes store on my computer, and then stream it to my apple TV (2nd gen)?

Thank you alleycat. I have two rental movies in my iTunes library in the rentals section top left of the window that have not been played. I have home sharing turned on on both my apple TV and my Mac. Both machines are completely software updated. I can see all of my owned movies in the Computer>Library>Movies section of the menus, but neither the rentals themselves nor a rental fouler are anywhere to be found on the apple TV. I dropped by the apple store on the way home from work and they suggested that it should be working just as you described, and suggested a restore, which I've performed. Still no rentals from the Mac library are visible on the apple TV. Any ideas?
Riversmith

HT2500 Hi, I have a problem with my mac mail account. Its linked with my website and i've just transferred my domain and host plan to 123-reg.co.uk Now for some reason emails disappear from my inbox! Emails come in and then my inbox is empty.. Help!

Hi, I have a problem with my mac mail account. Its linked with my website and i've just transferred my domain and host plan to 123-reg.co.uk Now for some reason emails disappear from my inbox! Emails come in and then my inbox is empty.. Help!

Lord K. Thank you. Yes I am within the 90 time period, however I travel Intertionally and I can not receive not make a call to Apple. I was just at the Genius Bar in Chicago and they said, don't worry about it. It just floats out there, however, I can not recover my messages on a flash drive. I need to go back to my old computer which I don't have with me. My messages were in folders for a lawsuit. It is going to take an incredible amount of work for me to, you have no Idea. We are talking thousands of pages! I the defendent will have them during discovery so I am not so worried. However, I can not bring them to him on a Flashdrive when I meet with him without an extraordinary amount of presssure on my part. THis is not just some little email issue. This is suing EXPEDIA and Tripadviosr.com

Migration from Essbase 7.5.1 to system 9 and then to 11

Similar Messages

Maybe you are looking for