Migration From Exchange 2010 Hybrid to Exchange 2013 Hybrid Deployment
hi,
I have existing Exchange Server 2010 Hybrid Deployment. Planning to migrate to Exchange 2013. However, while schema update, i am facing some errors/warnings as can be seen in attached screenshot.
I have already checked and current functional level in DC is Windows Server 2003. What could be the best steps to troubleshoot the problems and proceed further with Exchange 2013 installation?
Thanks
Hi Muhammad
Can you please give few more information about your environment so that people around here can help you out
I have existing Exchange Server 2010 Hybrid Deployment - Do you have Exchange 2010 and Office 365 in a
hybrid setup now ?
Are you trying to upgrade your on premise Exchange 2010 servers to Exchange 2013 ?
Or Are you trying to migrate your on premise Exchange 2010 to a different forest to Exchange 2013 ?
You can try the below suggestions-
I would better suggest you to follow Microsoft Exchange Server Deployment Assistant - http://technet.microsoft.com/en-us/office/dn756393.aspx
Also i would recommend you to check the prerequisites for hybrid deployment with office 365
http://technet.microsoft.com/en-us/library/hh534377(v=exchg.150).aspx
Cheers !!!
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)
Similar Messages
-
HT204350 Migrating from a 2010 MBP to a 2013 iMac - stuck halfway through???
I have begun migrating from a 2010 MBP to a 2013 iMac after installing mavericks on both. They are connected by ethernet. The MBP isn't updated to the latest version because it was installed from a previous copy from apple. The migration has started and is stuck on 1 hour19 mins, what should i do? is it safe to somehow stop the migration process? or is it best to leave it be for a few hours or something? i had a lot of trouble starting the process as i had to try multiple times to get it to locate all the files and folders on the MBP. Thanks for the help.
Welcome to Apple Support Communities
Leave it for some minutes to see if the migration process continues. If not, simply turn off both Macs, turn them on and transfer the files again.
If the migration gets stuck again, consider the option of making a Time Machine backup of your old MacBook Pro onto an external drive, and then use that backup to restore your files to the iMac. The steps to restore a backup from an external drive are the same. -
Migration from sharepoint 2010 enterprise to sharepoint 2013 standard
Hi
I need to do migration from SharePoint 2010 enterprise to SharePoint 2013 standard. We have only one content database and no custom deployments. I had tried database attach upgrade method. After I run Mount-SPContentDatabase PS Command. First it ran well
for few minutes then it got stuck for hours and finally failed . Please let me know if anyone came across this situation. How to migrate from SharePoint 2010 enterprise to SharePoint 2013 standard? Thanks in advance.Thanks norari,
Yes ,following are the errors that i got during migration.
Event 5586(SharePoint foundation) of severity 'Error' occurred 6 more time(s) and was suppressed in the event log.
Failure trying to synch
web application a1c11f44-3bc3-4cce-ad2d-e1a459c46c67, ContentDB
6681d540-313f-4ccc-a770-66608eecf3be
string1
System.Data.SqlClient.SqlException
(0x80131904): Invalid object name 'TVF_EventCache_ReadPast_LEQId'. Invalid
object name 'TVF_EventCache_Id'. at
System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean
breakConnection, Action`1 wrapCloseInAction) at
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject
stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) at
System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand
cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler,
TdsParserStateObject stateObj, Boolean& dataReady) at
System.Data.SqlClient.SqlDataReader.TryConsumeMetaData() at
System.Data.SqlClient.SqlDataReader.get_MetaData() at
System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds,
RunBehavior runBehavior, String resetOptionsString) at
System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior
cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32
timeout, Task& task, Boolean asyncWrite, SqlDataReader ds) at
System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior,
RunBehavior runBehavior, Boolean returnStream, String method,
TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean
asyncWrite) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior
cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) at
System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String
method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior
behavior) at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand
command, CommandBehavior behavior, SqlQueryData monitoringData, Boolean
retryForDeadLock) at
Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command,
Boolean retryForDeadLock) at
Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command) at
Microsoft.SharePoint.SPChangeToken.GetCurrentChange(SqlSession session,
Int64& changeNumber, DateTime& changeTime) at
Microsoft.SharePoint.SPChangeToken..ctor(SPContentDatabase db) at
Microsoft.Office.Server.UserProfiles.ContentDBSynchronizer.SynchContentDB() at
Microsoft.Office.Server.Diagnostics.FirstChanceHandler.ExceptionFilter(Boolean
fRethrowException, TryBlock tryBlock, FilterBlock filter, CatchBlock catchBlock,
FinallyBlock finallyBlock) at
Microsoft.Office.Server.UserProfiles.WSSProfileSyncJob.Execute()
ClientConnectionId:a1e477c3-5e3c-4e38-818b-18504ae9b5ce Error
Number:208,State:1,Class:16 -
Exchange 2010 in a Exchange 2013 Environment
I am trying to install Exchange 2010 in an Exchange 2013 environment which was migrated from Exchange 2007 earlier.
Exchange 2010 sp1 Mailbox and Hub roles installed fine however I cannot install the CAS role. Saw some references to change the OAB to a non exchange 2013 version - however that is the only version we have = OAB 2013.
This is the error I get:-
Error:
The following error was generated when "$error.Clear();
get-OfflineAddressBook -DomainController $RoleDomainController | where { $_.IsDefault } | Enable-OabWebDistribution
" was run: "The object is read-only because it was created in a version of Exchange later than Exchange 0.20 (15.0.0.0). Current supported version is 0.10 (14.0.100.0).".
The object is read-only because it was created in a version of Exchange later than Exchange 0.20 (15.0.0.0). Current supported version is 0.10 (14.0.100.0).
Click here for help...
http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=ms.exch.err.Ex88D115&l=0&cl=cp
Elapsed Time: 00:02:15
Finalizing Setup
Cancelled
Regards, Vik Singh "If this thread answered your question, please click on "Mark as Answer"Hi,
Please temporary remove all the OAB objects then try re-install the CAS server again.
After installing CAS server, we can re-build the OAB on Exchange 2013.
More details in the following articles:
Remove-OabVirtualDirectory
http://technet.microsoft.com/en-us/library/aa995963(v=exchg.150).aspx
New-OabVirtualDirectory
http://technet.microsoft.com/en-us/library/bb123735(v=exchg.150).aspx
Hope it is helpful.
If the CAS server still cannot be installed, please post the details of setup log.
Thanks
Mavis -
Cross forest migration Exchange 2010 SP2 to Exchange 2010 SP2
Hi,
We are planning cross forest migration Exchange 2010 SP2 to Exchange 2010 SP2.
Requesting you to please help us out for below scenario.
Source Exchange 2010 SP2:- abc.com
2AD, 2CAS & 2 MBX servers
Database:- 4
Total Users :- 3500
Accepted Domains :- 8
Total Data:- 5TB +
Target Exchange 2010 SP2:- xyz.com
Resource allocated same as above.
Now we have to migrate users along with data to target forest xyz.com keeping both setup live, as moving 5TB + data will be a ongoing process and the same will take some time.
With the guidelines mentioned in
http://careexchange.in/cross-forest-migration-guide-exchange-2010-to-exchange-2010/#comment-14203 we are able to migrate test users along with data, but after migration the migrated user is not able to connect through MS Outlook even not able to login into
OWA. It gives error “The Outlook Web App address
https://mail.abc.com/owa is out of date.”
Kindly let us know how to solve this issue.
Kindly let me know if you want any more information from our end.
Thanks in advance.
Thanks and Regards, Shashank KudiHi Shashank,
Do you have certificates properly installed and configured in the target Exchange?
If not, Please configure certificate and import the certificate to the trusted root CA if you are using internal CA cert.
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. -
After Migrating from Sharpoint 2010 to Sharepoint 2013 list filter options changed
Hi All,
After migrating from SP 2010 to SP2013 i found list View filter option is changed and filter is not working Pls help its really urgent.... you can check field 1 and field 2 in following screen shot.
Prasad kambarHi ,
According to your description, my understanding is that your list filter cannot work after Migrating from SharePoint 2010 to SharePoint 2013.
For your issue, please check your log files for any issues. Also you can refer to the blogs for troubleshooting SharePoint 2013 migration:
Firstly try running Test-SPContentDatabase on your source database for any issues -
Test-SPContentDatabase - http://technet.microsoft.com/en-us/library/ff607941.aspx
Troubleshoot site collection upgrade issues in SharePoint 2013 http://technet.microsoft.com/en-us/library/jj219648.aspx
Verify database upgrades in SharePoint 2013 -http://technet.microsoft.com/en-us/library/cc424972.aspx
And please have a look at your custom solution on your site.
Best Regards,
Eric
Eric Tao
TechNet Community Support -
Lync 2013 migration from Lync 2010
Hi All,
I have a problem after I've successfully migrated our Lync environment from Lync 2010 (what was migrated from OCS 2008 R2) to Lync 2013.
When I would like to delete the old Lync 2010 Front End server from the topology I cannot do that, because there are some TrustedApplicationPool registered to that. And I cannot delete this unused TrustedApplicationPools, because I got the following error:
"Remove-CsTrustedApplicationPool : Cannot remove legacy trusted application pool. Use the legacy tools to remove the pool, then run Merge-CsTopology."
I've tried that many ways, I've tried the merging etc. but it was unsuccessful. Has anybody any idea, step-by-step or something what can helpful to me?
Many thanks,
Tamás DobosHi,
Did you check this step by step migration lync 2010 to 2013
http://www.oiboran.com/?p=1073
To remove Trusted application pools
Get-CSTrustedApplicationPool
Remove-CSTrustedApplicationPool -Identity nameofthepool
Removing Lync 2010
http://terenceluk.blogspot.nl/2012/12/removing-lync-server-2010-standard.html
Whenever you see a helpful reply, click on Vote As Helpful & click on Mark As Answer if a post answers your question. -
Migration from 2003 - 2010, OAB errors on client, and OAB virtual directory does not contain any files.
Hi,
Please re-create the Outlook profile to have a try. If the issue persists, we can do the further checks in Exchange server.
Please make sure you have changed the OAB generation server to Exchange 2010 and enable Web distribution on the Exchange 2010 Client Access server:
Move-OfflineAddressBook "Default Offline Address List" -Server <MBX2010>
If all configurations are correct, please check whether there is any folder in the following path in Exchange sever 2010:
a. OAB generation in Mailbox:
\\Program Files\Microsoft\Exchange Server\V14\ExchangeOAB
b. OAB distribution in Client Access:
\\Program Files\Microsoft\Exchange Server\V14\ClientAccess\OAB
Thanks,
Winnie Liang
TechNet Community Support -
Search not working in site collections migrated from MOSS 2007 to SharePoint Server 2013
I have few site collections migrated from MOSS 2007 to SharePoint Server 2013 using database attach (first to 2010 and then to 2013).
When I search for anything in these migrated sites, I get "Nothing here matches your search".
Checked the crawl log for these sites and see this error for all items.
The content processing component failed to process the security descriptor of the item. ( The input ACL is invalid (1210 / 2072).; ; SearchID =
Some-Random-GUID )
Search works fine in newly created sites in 2013 environment.
Please help.Hello
Did you migrate your users to claims when you migrated the databases?
$wa = Get-SPWebApplication http://yourdom.com
$wa.MigrateUsers($true)
$wa.ProvisionGlobally()
I assume the sites that work and the migrated content are in the same database?
MCITP-EA | "Never test how deep the water is with both feet" -
Sending a document from a 2010 site to a 2013 site using send to connection
Here's my issue: I work for a large organisation with lots of different teams. Each time is live with a SharePoint 2010 team site, where they keep all of their working documents.
Now, we want to set up records sites for the teams and, as we have it available, we were considering using 2013 to create the records sites. So I have farm (a): 2010 team sites and farm (b): 2013 records centres.
I set up a send to connection from central admin in farm (a) to send records to farm (b). When I tested the link I got the "verification successful". But, when I went into my site on farm (a), uploaded a document, clicked send to then farm
(b) and I got this error:
Out of interest, I tried doing the same with two 2010 farms and I was successfully able to send a document from farm (a) to farm (b) when both farms were 2010 farms.
So am I to conclude that it's not possible to send a document from a 2010 site to a 2013 site?I have tried that in past and it did not work for me. Our users use old 2010 record center but we migrated the site and wanted all the document to route to 2013. we couldnt remove 2010 record center till we migrate all sites.
Let me know if you have any workflow or solution to this issue. -
Renaming TFS Server name upon migration from TFS 2010 to TFS 2012
We are migrating from TFS 2010 on existing server to TFS 2012 on new server. All components (TFS 2012, SQL 2012, SPS 2010) are directly on the new server similar to existing server (TFS 2010, SQL 2008 R2, WSS 3.0).
The new server has a new name, however the service provider that does the actual migration,
wants to rename
the new server to be same name as the name of the original existing server when it is shutdown. The rename is intended to be done using
netdom utility.
I noticed there are articles by microsoft and others that describe various issues that may arrise as
result of TFS server rename. However service provider still plans to rename based on his field experience and best practices.
What do u recommend to do in this aspect ? Why would it be necessary to rename and not use the new name (DNS can map old name as well to the new IP) ? What are the actual risks in such rename and is it worth it ?
Thank uHi Cathy,
Thank u for your reply.
We know that renaming the new server to the same name as the original one, is
not a must for the migration to work. The issue in question is as follows :
1. A Microsoft partner that has hands on experience in TFS migration, and planned to migrate for us, recommends to rename the new server name, to the original server name, utilizing net_dom command, and to do it during / after same procedure u
provided link to.
2. We found Microsoft documentation that cautions about renaming the server, e.g. renaming SQL server which is in our case on same machine where TFS 2012 is to be installed. However, the partner urges us to rename, explaining that net_dom should perform
the rename safely without caution risk.
Kindly let u sknow if Micorsoft considers such rename with net_dom to be a good
practice in low risk for such migration,
or better keep the new server name as it is and just map the old server name in DNS to the IP of the new server.
Thank u. -
Uninstall/Reinstall Exchange 2010 in coexisting Exchange 2003
Hi,
Can we uninstall Exchange 2010 without any affect to Exchange 2003 in the co-existing environment? I installed Exchange 2010 in existing Exchange 2003 and tried to configure for both Exchange exist in our domain. Somehow the Exchange 2010 crashed
and now it cannot start, only stuck in Initializing process. I want to uninstall and then reinstall but I don't know if doing this will cause any problem to the Existing Exchange 2003. Could someone tell me?
Thanks,
JimYou don't have to uninstall and reinstall server, just rebuild base server with OS with what it had earlier and recover Exchange 2010 with /m:recoverserver switch.
Recover an Exchange Server
I assume you still have Exchange 2010 database backup or original files for restore if needed and this is just OS crash and can not be repaired scenario
Blog:
http://exchangeshare.wordpress.com/ -
Migrating from Shared/Hosted Exchange 2010 to Onsite Exchange 2013
Hi All,
Hoping for some advice regarding a migration project I'm due to run with. A client has their current email data with a 3rd party hosted Exchange platform, this is a completely separate platform from their onsite AD infrastructure.
Platform wise it is built on Exchange 2010 that only really allows OWA/Outlook Anywhere/ActiveSync access. We'd like to migrate this platform to a more dedicated onsite Exchange 2013 platform.
Any software tools or advice appreciated, we're hoping to avoid exporting all the content to PST and manually importing but if this is the only way then fair enough. If there are utilities that may allow mailbox backfilling to suck the data out and in to
the new mailboxes in 2013 that would be awesome.
Thanks in advance!Hi,
According to your description, my understanding is that you want to migrate mailboxes from the other forest to your forest.
I recommend you refer to the following article to achieve migration:
http://msexchangeguru.com/2013/11/03/e2013crossforestmigration/
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support -
Error in moving exchange 2010 mailboxes to Exchange 2013 SP1 during migration
Dear All,
We were running Exchange 2010 SP3 with MBX/HT/CAS role in single server. Now we are migrating our exchange 2010 to Exchange 2013 SP1. After configuring co-existence and during the mailbox move from Exchange 2010 to Exchange 2013 SP1, we are facing below
error. Please help to troubleshot. As per our search on net, people were suggesting that it can be due to not able to resolve NetBIOS name. We checked same and we are able to ping both servers by NetBIOS and FQDN names.
[PS] C:\Windows\system32>New-MoveRequest -Identity
'[email protected]' -TargetDatabase "CI-DB01"
MapiExceptionNetworkError: Unable to make connection to the server. (hr=0x80004005, ec=2423)
Diagnostic context:
Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 1722
Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 323
Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0
Lid: 62184
Lid: 16280 dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
Lid: 8600 dwParam: 0x0 Msg: EEInfo: ProcessID: 6004
Lid: 12696 dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-08-21T09:10:43.8970000Z
Lid: 10648 dwParam: 0x0 Msg: EEInfo: Generating component: 18
Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 1237
Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 313
Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0
Lid: 62184
Lid: 16280 dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
Lid: 8600 dwParam: 0x0 Msg: EEInfo: ProcessID: 6004
Lid: 12696 dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-08-21T09:10:43.8970000Z
Lid: 10648 dwParam: 0x0 Msg: EEInfo: Generating component: 18
Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 10060
Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 311
Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 3
Lid: 12952 dwParam: 0x0 Msg: EEInfo: prm[0]: Long val: 22964
Lid: 15000 dwParam: 0x0 Msg: EEInfo: prm[1]: Pointer val: 0x0
Lid: 15000 dwParam: 0x0 Msg: EEInfo: prm[2]: Pointer val: 0xFE01A8C000000000
Lid: 62184
Lid: 16280 dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
Lid: 8600 dwParam: 0x0 Msg: EEInfo: ProcessID: 6004
Lid: 12696 dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-08-21T09:10:43.8970000Z
Lid: 10648 dwParam: 0x0 Msg: EEInfo: Generating component: 18
Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 10060
Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 318
Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0
Lid: 53361 StoreEc: 0x977
Lid: 51859
Lid: 33649 StoreEc: 0x977
Lid: 43315
Lid: 58225 StoreEc: 0x977
Lid: 39912 StoreEc: 0x977
Lid: 54129 StoreEc: 0x977
Lid: 50519
Lid: 59735 StoreEc: 0x977
Lid: 59199
Lid: 27356 StoreEc: 0x977
Lid: 65279
Lid: 52465 StoreEc: 0x977
Lid: 60065
Lid: 33777 StoreEc: 0x977
Lid: 59805
Lid: 52487 StoreEc: 0x977
Lid: 19778
Lid: 27970 StoreEc: 0x977
Lid: 17730
Lid: 25922 StoreEc: 0x977
+ CategoryInfo : NotSpecified: (:) [New-MoveRequest], RemoteTransientException
+ FullyQualifiedErrorId : [Server=Exch01,RequestId=f6886977-92f1-4148-991b-aa76b449aff5,TimeStamp=8/21/2014 9:1
0:43 AM] [FailureCategory=Cmdlet-RemoteTransientException] 7FCC37,Microsoft.Exchange.Management.RecipientTasks.New
MoveRequest
+ PSComputerName : Exch01.domain.local
Please help as we are stuck here!!
Thanks in advance!!Can yo ping server by name not by FQDN? e.g. ping server1.
Make sure firewall/antivirus not blocking communication. Disable antivirus and try
Thanks,
MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. -
Exchange 2010 SP3 cohabitation Exchange 2013 ecp?exchver=15 from external not work
Hi
i have installed an exchange 2013 cohabitation with exchange 2010 for migration. outlookanywere,ecp,owa, autodiscovery...etc are configurered
when i try to connect to the eac or owa internaly its work, but when i try to do externaly https://mail.mydomain.com/ecp?exchver=15
i have error 302, 301 to many redirections
how can i fix this
thanksin advanceHi,
Generally, status 301 means that the resource (page) is moved permanently to a new location. Please refer to Sneff_Gabor's suggetsion to check the Redirect setting s for OWA and ECP in IIS manager.
Additionally, please provide more information about your issue and collect any error logs for further troubleshooting.
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support -
Migrate from Zimbra Open Source to Exchange 2013
Hi there,
I am currently using Zimbra email client and I am considering switching to Exchange 2013, is there a tool which can seamlessly allow migration of all user accounts and mailboxes from Zimbra to Exchange?Hi Adam,
Base on my knowledge, there are no tools to make a direct migration from Zimbra to Exchange 2013 Server, however , you can consider to use the following methods:
1.
If there are a large number of mailboxes in Zimbra, you can use the
Microsoft Transporter Suite to migrate
mailboxes from Zimbra to Exchange 2007 at first, and then make the final transition to Exchange 2013 since Transporter Suite that is only supported in Exchange 2007 and the previous version.
2.
If just a small number of mailboxes in Zimbra, you can configure outlook for all Zimbra users, export data into PST file, and then you can use “Import-Mailbox” cmdlet to
import all PST files back to newly created users’ mailboxes on the exchange 2013 server
Notes: Either way, please play the method in a lab environment to familiar with it
Resources:
Migrating
from POP/IMAP to Exchange Server 2007 using Microsoft Transport Suite
Microsoft Transporter Suite for Lotus Domino demo
Best regards,
Niko Cheng
TechNet Community Support
Maybe you are looking for
-
Can I use a Windows 7 backup in a boot camp installation
Hi, About to buy a Mac and I was just wondering if I could use a Windows Backup System Image to install Windows 7 using Boot Camp Assistant in the Mac or if I need to have a brand new copy of Windows. Apologies if this sounds like an incredibly stupi
-
Cross-references in Pages?
This is one of those "In Word I could do ____, how do I do it in Pages?" questions. Word has a cross-reference feature where, for example, you could insert a statement such as: "See footnote __, above." The blank line would actually be text field tha
-
Hi, Can't we use seam tags inside Java class ? I need to create a custom tag using seam tag <s:link /> stringbuf.append("<s:link id=\"sample\" view=\"/sample.seam\" value=\"Sample123\" propagation=\"none\"/> "); The below given code is not giving me
-
Installing Adobe Reader on an Android tablet.
I downloaded Adobe-Android to my Android (2.2.1) tablet, with no problems. When I go to install it, I go to App Manager, hit "Install", get a screen that asks, "Do you want to install this application?, followed by "Allow this application to:" This
-
Screenshots in cover flow of Safari history are empty. Why? Who knows?
Screenshots in cover flow of Safari history are empty. Whereas all history is visible. Why? Who knows?