Migration from HP-UX to Linux 64 bit on SAP XI 3.0 environment
Hi All,
Can you please provide the requirements steps/documents for migration from HP-UX to Linux 64 bit on SAP XI 3.0 environment
Thanks
Sateesh
Hi Sateesh,
This migration which you refer here is a heterogenous system copy. you may refer the system copy guide for the same.
you can get the system copy guide from the below link
Database and Operating Systems - System Copy [original link is broken]
Also refer the SMP link
http://service.sap.com/osdbmigration
The migration should only be performed by SAP certified OS/DB migration consultant.
Regards,
Chandru
Similar Messages
-
Tuxedo Migration from Tuxedo 9.1 32 bit to Tuxedo 9.1 64 bit
Hi All,
Please tell me how to go for Tuxedo Migration from Tuxedo 9.1 32 bit to Tuxedo 9.1 64 bit. O.S. is IBM AIX 5.3 64 bit What are the prerequisite, and how to go for that. Please tell hoe to go for the same. Please mail at [email protected]Ravi,
You will need to download 64-bit AIX binaries for Tuxedo 9.1.
Since 64-bit object files and libraries cannot be combined with 32-bit object files and libraries in the same executable, you will also need to obtain 64-bit versions of any database or other third party software that is linked with your Tuxedo application. (If you are using Oracle database, 64-bit and 32-bit support is combined in a single download, and you will just need to change $ORACLE_HOME/lib32 to $ORACLE_HOME/lib in your makefiles.)
Once this is done, you will need to rebuild your Tuxedo servers, clients, and TMS processes.
If you use buildclient and buildserver to compile all files, then you may not need to change anything else. If you call the compiler directly to compile source files into object files, then you will need to add additional flags for 64-bit compilation. If your makefiles are well-coded, you might just need to change CFLAGS in one place. Look at the output of "buildclient -v" for a simple client on the 32-bit system and on the 64-bit system to see which additional flags might be needed.
When your application is compiled in 64-bit mode, you just need to test it out to ensure that the application does not have any implicit 32-bit dependencies such as assuming that a "long" is the same as an "int".
Ed -
4.6C migration from HP-UX to Linux
Hi all,
we are planning to move the current 4.6C environment from HP-UX to Linux platform. we need help with a couple of things that are posted below.
1. Is 4.6c compatible on RH Linux 11.31.
2. Do we need a seperate liscense for Linux or can we use the existing one.
3. Can we install a fresh installation of 4.6C on linux and import the DB from teh present working environment. Is this the way it is done.
4. Can we upgrade the DB from Oracle 9.2 to 10.4 due the migration process.
Your hellp will be appreciated.Dear
1. Is 4.6c compatible on RH Linux 11.31.
2. Do we need a seperate liscense for Linux or can we use the existing one.
3. Can we install a fresh installation of 4.6C on linux and import the DB from teh present working environment. Is this the way it is done.
4. Can we upgrade the DB from Oracle 9.2 to 10.4 due the migration process.
1. There is no Red Hat 11.31, only HP-UX 11.31 and Red Hat Enterprise Linux 5 (or 4).
2. After migration, you hardware key changed, you need to renew your license. You do not need a separate one
3. for OS/DB Migration, check: http://service.sap.com/osdbmigration
4. There is no Oracle 10.4, only 10.2.0.4 ! If you want to use Oracle 10.2.0.4 you'd need the 46C_EX2 kernel
You should also take care, that native installation for 46c is 32bit only (for Linux). However, we have a prepared 46c installation CD for 64bit installations on linuxx86_64 (with kernel 46c_EXT -> later upgrade to 46c_EX2). You can request this CD via an OSS call on BC-OP-LNX-X64.
Hannes -
HI All,
We are just migrating OS from HP UX to Linux .But we are not touching database.In ABAP System there is no instance ID.So after migration all the application need not to be reinstalled.But in java there is unique instance id registered with java CI .So we need to again install application .Otherwise application server don't get synchronized .Is there any other way so that after migration also all applications are synchronized.We need not to manually reinstall .
Regards,
AbhishekAbhishek,
Go thorugh SAP Note 966752 - Java system copy problems with the Java Migration Toolkit
You will get some clue , plan accordingly , In my view manual action will be required
Regards, -
Issue while migrating from File to DB based repository for SAP adapter
Hi
I recently migrated from file based repository to DB based repository.
SAP Adapter: DB repository for JCA configuration
After that I created the new targets and the jca log file showed me correct entry saying that it read from DB repository.
Thread[Thread-6,6,main] [info ] Repository URL 'jdbc:oracle:thin:@db_host:1521/fmwdbqa' resolved to repositoty type: oracle
But when I restarted the weblogic server I observed that it is again reading from the file repository.
Thread[[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads] [info ] Repository URL 'file:///opt/apps/Oracle/Middleware/Oracle_SOA1/soa/thirdparty/ApplicationAdapters/config/XYZ/repository.xml' resolved to repositoty type: file
Any reason why this is happening? Any other setting required to avoid this?
Regards
SubhankarHi Manoj
I checked the web.xml under MW_HOME/Oracle_SOA1/soa/thirdparty/ApplicationAdapters/iwafjca.war/WEB-INF folder. The iway.jndi is set to below :
<param-name>iway.jndi</param-name>
<param-value>eis/OracleJCAAdapter/DefaultConnection</param-value>
I checked the outbound connection settings from Admin console under below path
Home >Summary of Deployments >iwafjca > configuration
I can see that the properties IWayRepoURL, IWayRepoUser and IWayRepoPassword are set to blank here. Where exactly are these property values picked from ? Or do I need to manually edit it here in admin console itself?
Regards
Subhankar -
APEX Database migration from HP-UX to Linux
Hi,
we are migrating database from oracle 10.2.0.3 on HP-UX to 10.2.0.4 on Linux. We have Apex 3.1.2.00.02 installed in 10.2.0.3.
Could anyone please provide me any checklist or relevant documentations to migrate database which contains APEX. we are planning to use export/imp
Please help.
Thanks,
KrishFirst thing I would do is export all of your applications just to be safe. If you're doing a full database export / import, I believe it will work. If you're going schema by schema, it will not.
The cleanest way is to do a fresh install in your new database...
Tyler Muth
http://tylermuth.wordpress.com
"Applied Oracle Security: Developing Secure Database and Middleware Environments": http://sn.im/aos.book -
Migration from HP-UX to Linux DB for UPK3.5
Hi all
I have a customer who wants to migrate the UPK server from one server to other also the repository database used by the UPK server.
Old UPK server details
UPK server platform:Windows 2003 SP2
UPK version:3.5
Database platform:HP-UX
DB Version:10.2.0.4
New UPK server details
UPK server platform:Windows 2003 SP2
UPK version:3.5
Database platform:Linux
Version:10.2.0.3
Can you please advise the procedure that needs to be followed and the document id if any?
Thank you in advance and best regards,
DanAs stated several times before, this is not the forum for UPK questions. Please look at top of the thread list for information on how to reach the UPK forum.
-
Migration from SUSE 32 to RHEL64 bit
Hi all,
WE want to migrate our Oracle databse from oracle 9.2.0.6 database from SUSE 10 32 bit to RHEL4 64 bit platform.
I want ot know can i use RMAN Duplicate database command to migrate the same....
or i have to use the exp/imp method only.....So sir don;t u think so if i will use IMP?EXP it is better.....
yeah there we have to create schema ,tablespace and then import.......
According to you first i have to install oracle 32 bit and in oracle 32 bit , in oracle 32 bit SGA can't excced 1.7 gb then i have to use transport tablespace to import and then i have to upgrade our oracle s/w from 32 bit to 64 bit then increased the memory ...don't u think so it will increase the overhead...pls suggest me... -
Migration from HP-UX to Linux on Oracle DB: From 9.2 to 10.2
Consultation, (SAP R3 4.6 Ext)
If I make an export of oracle 9.2 on HP platform, I can make an import to oracle 10.2 on Linux platform?
Someone could make a similar migration?
Regards.> If I make an export of oracle 9.2 on HP platform, I can make an import to oracle 10.2 on Linux platform?
Yes - you can. Technically the exports are platform and database independent.
Keep in mind that for a production migration you need to have a certified migration consultant on-site, otherwise you will loose support for the target system (http://service.sap.com/osdbmigration).
Also keep in mind that HP-UX is big endian and the target platform is little endian - so if you exchange binary data with other/external systems they need to be made aware of this.
Markus -
OS Migration from AIX to SUSE Linux
Hi All,
We are having a scenario in which we want to change our OS.
First we have AIX with oracle 10.2.0.4 and SAP ECC 6.00 which we want to change into new hardware with SUSE Linux with same Oracle and ECC 6.00
So we are planning to do Oracle Offline backup restore in the linux system, but in some placed i found If not homogeneous it will not work..
Please let us know the best way.
Thanks & Regards,
Balaji.SDear Balaji,
you also need a certified migration consultant, see [https://service.sap.com/osdbmigration|https://service.sap.com/osdbmigration]
Thanks,
Hannes -
Database migration from Windows 10g to Linux 11g
Hello All,
We are having a small database in a windows 2003 server machine. We would be shift this database to another Linux platform. So far My action plan is as follows:-
1. Shutting down instance.
2. copying physical structure of Database
3. alter database backup control file to trace as '....sql';
4. Transfer all the files.
5. In the Linux server creating pfile and creating control file using following commad:-
CREATE CONTROLFILE REUSE DATABASE "DBNAME" NORESETLOGS NOARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
MAXINSTANCES 8
MAXLOGHISTORY
LOGFILE GROUP 1 '../REDO01.LOG' SIZE 50M,
GROUP 2 '../REDO02.LOG' SIZE 50M,
GROUP 3 '../REDO03.LOG' SIZE 50M
DATAFILE '../SYSTEM01.DBF',
'../UNDOTBS01.DBF',
'../SYSAUX01.DBF',
'../USERS01.DBF',
'../RMANTBS01.DBF'
CHARACTER SET WE8MSWIN1252
6. Opening the database in upgrade mode. I am getting error:
Database mounted.
ORA-01113: file 1 needs media recovery
ORA-01110: data file 1: '/u01/COLDBACKUP_T1RMAN_POC/SYSTEM01.DBF'
Please help
-Reards,
Sahaj_DBA_saha wrote:
Hello All,
We are having a small database in a windows 2003 server machine. We would be shift this database to another Linux platform. So far My action plan is as follows:-
1. Shutting down instance.
2. copying physical structure of Database
3. alter database backup control file to trace as '....sql';
4. Transfer all the files.
5. In the Linux server creating pfile and creating control file using following commad:-
CREATE CONTROLFILE REUSE DATABASE "DBNAME" NORESETLOGS NOARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
MAXINSTANCES 8
MAXLOGHISTORY
LOGFILE GROUP 1 '../REDO01.LOG' SIZE 50M,
GROUP 2 '../REDO02.LOG' SIZE 50M,
GROUP 3 '../REDO03.LOG' SIZE 50M
DATAFILE '../SYSTEM01.DBF',
'../UNDOTBS01.DBF',
'../SYSAUX01.DBF',
'../USERS01.DBF',
'../RMANTBS01.DBF'
CHARACTER SET WE8MSWIN1252
6. Opening the database in upgrade mode. I am getting error:
Database mounted.
ORA-01113: file 1 needs media recovery
ORA-01110: data file 1: '/u01/COLDBACKUP_T1RMAN_POC/SYSTEM01.DBF'
Please help
-Reards,
SahaThis will not work ....
Since you are performing the cross-platform migration . So this method will not work . Either use the exp/imp or datapump or the transport tablespace . for more about the transport tablespace check the below link
http://neeraj-dba.blogspot.in/2012/01/cross-platform-transportable.html
Hope this may help you
--neeraj -
SAP Oracle database 11.2 migrating from Solaris to RedHat Linux (x86_64)
What is SAP guidance on database migration ? What is the best approach ?
I heard person who does migration has to be certified by SAP.Jun He wrote:
Thank you for prompt response. When you say "heterogenous system copy" does not support it, do you mean SAP does not support the converted system or just the process itself ?
>
> Actually I am discussing with SAP about generating a system copy to send over to SAP and they said that Data Pump is an option they can accept. If Datapump is accepted by SAP internally, I would think after migration SAP should support datapump-migrated system.
Hi Jun,
I didn't said that SAP will not support your system, after the migration by Oracle data pump. I noted that OS/DB migration is performed by heterogenous system copy with the migration key.
Under this circumstance, if they accept to support you during the migration process with data pump, there's no problem. As I noted that previously, technically it is possible to migrate the system by using data pump, but I didn't requested that kind of support to SAP. I've been surprized to hear that they will support migration with Oracle data pump method. This is my own assestment.
Will they support you, if you face with a problem during the migration with data pump? Or some other problems you may be face after you go to productive, because of this migration?
>> When you say "heterogenous system copy" does not support it, do you mean SAP does not support the converted system or just the process itself ?
I mean that SAP does not support just process itself and the problem you face because of this migration.
Best regards,
Orkun Gedik
Edited by: Orkun Gedik on Jun 29, 2011 11:11 PM -
Migration of Oracle Apps from HP-UX to Linux
Hi Experts,
We have plan to migrate the Oracle Application from HP-UX to Linux OS. Can you please suggest me the road map to be followed :
requirement :
Source : 11.5.10.2 + 10.2.0.4 (DB) : HP-UX
Target need to be : 11.5.10.2 + 11.2.0.2 (DB ) RHEL 64-Bit
Would be grateful , if you suggest the road-map. And suggest if the DB upgrade to be done in the beginning or after the migration.
And also , please provide the note ids to be followed for each activity.Hi,
At high-end you will have to break up your work into 02 level:
1. Perform a platform migration from HP-UX to Linux
2. Upgrade the Database to 11.2.0.3 from 10.2.0.4
Note: I was aware your target database was 11.2.0.2, but since the latest update is 11.2.0.3 I recommend you do the same.
1. Perform a platform migration from HP-UX to Linux
HP and Linux share a different endian format, therefore you will have to proceed migrating your database via and export/import (you may not be able to use Transportable tablespace).
Please refer following:
https://blogs.oracle.com/stevenChan/entry/migrating_ebusiness_suite_databases_between_platfo
Notes:
Migrating to Linux with Oracle Applications Release 11i (Doc ID 238276.1)
10g Export/Import Process for Oracle Applications Release 11i [ID 331221.1]
10g Release 2 Export/Import Process for Oracle Applications Release 11i [ID 362205.1]
2. Upgrade the Database to 11.2.0.3 from 10.2.0.4
Please refer notes:
Interoperability Notes Oracle EBS 11i with Oracle Database 11gR2 (11.2.0) (Doc ID 881505.1)
Interoperability Notes EBS 11i with RDBMS 12cR1 (Doc ID 1524399.1)
Note: 12c is also certified now with 11i, FYI.
Thanks &
Best Regards -
Migration from windows to Linux -- Autoconfig Error
Hi DBA's
I am doing Migration from Windows 2000 to Linux 4.0ES Migration.
Application - 11.5.10.2, Database - 9.2.0.6.
Documents Followed
230627.1 - Export/Import Process for Oracle Applications Release 11i Database Instances Using Oracle9i Enterprise Edition
238276.1 - Migrating to Linux with Oracle Applications Release 11i
Till now i have finished as follows.
1) Doc -238276.1
Section 1 completed on the source instance.
2) Doc -230627.1
Section 1, Section 2, Section 3 completed.
3) Now i started 238276.1
Section 2.
Step 1- updated the manifest --- Completed
Step 2- copy appl_top and Common_top -- Completed
Step 3- Clone the AutoConfig XML context file on the Target System -- Completed.
Step 4- Install iAS Oracle Home -- Completed.
Step 5- Apply the Oracle interoperability patches for Red Hat Enterprise Linux -- Ignored
Note- Because My Application is 11.5.10.2.
Step 6- Run AutoConfig setup phase on the Target System -- Error out.
I run the command as follows.
# cd <AD_TOP>/bin
# ./adconfig.sh run=INSTE8_SETUP contextfile=<Target System ctxfile>
[applmgr@aqherp bin]$ ./adconfig.sh run=INSTE8_SETUP contextfile=/s03/oracle/prodappl/admin/PROD_aqherp.xml
Enter the APPS user password: Script execution phase specified: INSTE8_SETUP
The log file for this session is located at: /s03/oracle/prodappl/admin/PROD_aqherp/log/01122007/adconfig.log
AutoConfig is configuring the Applications environment...
AutoConfig will consider the custom templates if present.
Using APPL_TOP location : /s03/oracle/prodappl
ERROR: Unable to set CLASSPATH
Neither of the following are present
/usr/jre/lib/rt.jar
/usr/lib/rt.jarERROR: Unable to set CLASSPATH
Neither of the following are present
/usr/jre/lib/rt.jar
/usr/lib/rt.jar Classpath :
Version Conflicts among development maintained and customized templates encountered; aborting AutoConfig run.
The logfile for this session is located at: /s03/oracle/prodappl/admin/PROD_aqherp/log/01122007/adconfig.log
[applmgr@aqherp bin]$
==========================LOG FILE SHOWS=================================================
Starting AutoConfig at Mon Jan 12 20:07:21 2009
Using adconfig.pl version 115.81
Script execution phase specified: INSTE8_SETUP
Classpath :
Version Conflicts among development maintained and customized templates encountered; aborting AutoConfig run.
Please help me to resolve this issue.
Best Regards,
Suresh GeldaHi DBA's
I am able to run the autoconfig now, but i am getting errors in that
Please check log file which i am pasting here
Checking version of /s03/oracle/prodcomn/java/jdbc14.zip
File exists
RC-50208: Exception in method TimedProcessProcess.run
Raised by oracle.apps.ad.util.TimedProcess$TimedProcessProcess: java.io.IOException: Cannot run program "/s03/oracle/prodappl/ad/11.5.0/bin/adident": java.io.IOException: error=2, No such file or directory
File Version: -1
File version could not be obtained
Skipping updating s_fnd_jdbc_stmt_cache_size.
Updated s_fnd_jdbc_stmt_cache_size to 0
Configuring MOVEJSPPAGEREPOS settings ...
Execute SYSTEM command : mv /s03/oracle/prodcomn/html/_pages /s03/oracle/prodcomn
/s03/oracle/prodcomn/html/_pages is moved to /s03/oracle/prodcomn/_pages successfully
ERRORCODE = 1 ERRORCODE_END
.end std out.
*******FATAL ERROR*******
PROGRAM : (/s03/oracle/prodappl/fnd/11.5.0/patch/115/bin/txkSetConfig.pl)
TIME : Tue Jan 13 12:23:09 2009
FUNCTION: [ Level 1 ]
ERRORMSG: ERROR: Reading /tmp//orainst/unix.rgs: No such file or directory
STACK TRACE
at /s03/oracle/prodappl/au/11.5.0/perl/TXK/Error.pm line 219
TXK::Error::printMsg('TXK::Error', 'ERROR: Reading /tmp//orainst/unix.rgs: No such file or direct...') called at /s03/oracle/prodappl/fnd/11.5.0/patch/115/bin/txkSetConfig.pl line 92
.end err out.
Result : FAILED
===========================================================================
Generate Tns Names
Logfile: /s03/oracle/prodappl/admin/PROD_aqherp/log/01131223/NetServiceHandler.log
Classpath : /usr/java/jdk1.6.0_11/jre/lib/rt.jar:/usr/java/jdk1.6.0_11/lib/dt.jar:/usr/java/jdk1.6.0_11/lib/tools.jar:/s03/oracle/prodcomn/java/appsborg2.zip:/s03/oracle/prodcomn/java
Updating s_tnsmode to 'generateTNS'
UpdateContext exited with status: 0
java.lang.Exception: Error while generating listener.ora.
at oracle.apps.ad.tools.configuration.NetServiceHandler.generate806Listener(NetServiceHandler.java:2503)
at oracle.apps.ad.tools.configuration.NetServiceHandler.processNode(NetServiceHandler.java:2272)
at oracle.apps.ad.tools.configuration.NetServiceHandler.main(NetServiceHandler.java:2978)
AC-50480: Internal error occurred: java.lang.Exception: Error while generating listener.ora.
Error generating tnsnames.ora from the database, temperory tnsnames.ora will be generated using templates
Instantiating Tools tnsnames.ora
Tools tnsnames.ora instantiated
Web tnsnames.ora instantiated
adgentns.pl exiting with status 512
ERRORCODE = 512 ERRORCODE_END
.end std out.
.end err out.
================================================================================
Uploading file system Context file and its templates to the database
Context file :
/s03/oracle/prodappl/admin/PROD_aqherp.xml
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL=''
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : aqherp
sDbDomain : qudrah.com
sDbPort : 1521
sDbSid : PROD
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@aqherp.qudrah.com:1521:PROD
Connection obtained
-------------------ADX Database Utility Finished---------------
Result : Failed to upload the Context file to the DataBase
Uploading Context file and its templates to the database...FAILED
StackTrace:
java.lang.Exception: oracle.apps.ad.autoconfig.oam.InDbCtxFileException: SQLException : ORA-04068: existing state of packages has been discarded
ORA-04063: package body "APPS.FND_GSM_UTIL" has errors
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at line 1
at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.updateDBCtx(FileSysDBCtxMerge.java:685)
at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.updateDBFiles(FileSysDBCtxMerge.java:222)
at oracle.apps.ad.context.CtxValueMgt.processCtxFile(CtxValueMgt.java:1663)
at oracle.apps.ad.context.CtxValueMgt.main(CtxValueMgt.java:709)
=========================================================================================
After Setting Environment
ORACLE_HOME : /tmp/
LD_LIBRARY_PATH : /tmp//lib:/usr/X11R6/lib:/usr/openwin/lib:/usr/java/jdk1.6.0_11/jre/lib/i386/server:/usr/java/jdk1.6.0_11/jre/lib/i386:/usr/java/jdk1.6.0_11/jre/../lib/i386:/tmp//lib:/usr/X11R6/lib:/usr/openwin/lib
PATH : /tmp//bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/s03/oracle/proddb/9.2.0/bin
ORA_NLS : /tmp//ocommon/nls/admin/data
TNS_ADMIN : /tmp//network/admin/PROD_aqherp
NLS_LANG : American_America.AR8MSWIN1256
NLS_DATE_FORMAT : DD-MON-RR
NLS_NUMERIC_CHARACTERS : .,
NLS_SORT : BINARY
CONTEXT_NAME : PROD_aqherp
AD_TOP : /s03/oracle/prodappl/ad/11.5.0
FND_TOP : /s03/oracle/prodappl/fnd/11.5.0
TXK_TOP : /s03/oracle/prodcomn/rgf/PROD_aqherp
APPLTMP : /s03/oracle/prodcomn/temp
TWO_TASK : PROD
ORACLE_LOCALPREFERENCE : /tmp//tools/admin
TNS CONNECT STRING : PROD
SQLPLUS : /s03/oracle/proddb/9.2.0/bin/sqlplus
Setting of Environment completed.
SQL Command: SELECT language_code||',' FROM fnd_languages WHERE installed_flag IN ('B','I') AND language_code NOT IN ('US', 'SQ','IS','LT','VN')
ERROR DESCRIPTION:
(*******FATAL ERROR*******
PROGRAM : (/s03/oracle/prodcomn/admin/install/PROD_aqherp/txkFrmUTF8.pl)
TIME : Tue Jan 13 12:24:40 2009
FUNCTION: TXK::SQLPLUS::validateConnectInfo [ Level 3 ]
MESSAGES:
SQLPLUS executable not found in ORACLE_HOME/bin
STACK TRACE
at /s03/oracle/prodappl/au/11.5.0/perl/TXK/Error.pm line 167
TXK::Error::abort('TXK::Error', 'HASH(0x810dd30)') called at /s03/oracle/prodappl/au/11.5.0/perl/TXK/Common.pm line 299
TXK::Common::doError('TXK::SQLPLUS=HASH(0x853767c)', 'SQLPLUS executable not found in ORACLE_HOME/bin', 'undef') called at /s03/oracle/prodappl/au/11.5.0/perl/TXK/Common.pm line 314
TXK::Common::setError('TXK::SQLPLUS=HASH(0x853767c)', 'SQLPLUS executable not found in ORACLE_HOME/bin') called at /s03/oracle/prodappl/au/11.5.0/perl/TXK/SQLPLUS.pm line 346
TXK::SQLPLUS::validateConnectInfo('TXK::SQLPLUS=HASH(0x853767c)') called at /s03/oracle/prodappl/au/11.5.0/perl/TXK/SQLPLUS.pm line 267
TXK::SQLPLUS::setConnectInfo('TXK::SQLPLUS=HASH(0x853767c)', 'HASH(0x8537880)') called at /s03/oracle/prodappl/au/11.5.0/perl/TXK/TechstackDB.pm line 588
TXK::TechstackDB::_getSQLValue('TXK::TechstackDB=HASH(0x853755c)', 'SELECT language_code||\',\' FROM fnd_languages WHERE installe...') called at /s03/oracle/prodappl/au/11.5.0/perl/TXK/TechstackDB.pm line 563
TXK::TechstackDB::getSQLValue('TXK::TechstackDB=HASH(0x853755c)', 'SELECT language_code||\',\' FROM fnd_languages WHERE installe...') called at /s03/oracle/prodcomn/admin/install/PROD_aqherp/txkFrmUTF8.pl line 147
eval {...} called at /s03/oracle/prodcomn/admin/install/PROD_aqherp/txkFrmUTF8.pl line 112
ERRORCODE = 1 ERRORCODE_END
.end std out.
.end err out.
======================================================================================================
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /s03/oracle/prodcomn/admin/install/PROD_aqherp
adgendbc.sh INSTE8_SETUP 1
adgenjky.sh INSTE8_SETUP 1
afcpnode.sh INSTE8_SETUP 1
afgcsreg.sh INSTE8_SETUP 1
txkMultinode.sh INSTE8_SETUP 1
wdbsvr.sh INSTE8_SETUP 1
Directory: /usr/bin/perl -I /usr/lib/perl5/5.8.5/i386-linux-thread-multi -I /usr/lib/perl5/5.8.5 -I /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi -I /usr/lib/perl5/site_perl/5.8.4/i386-linux-thread-multi -I /usr/lib/perl5/site_perl/5.8.3/i386-linux-thread-multi -I /usr/lib/perl5/site_perl/5.8.2/i386-linux-thread-multi -I /usr/lib/perl5/site_perl/5.8.1/i386-linux-thread-multi -I /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi -I /usr/lib/perl5/site_perl/5.8.5 -I /usr/lib/perl5/site_perl/5.8.4 -I /usr/lib/perl5/site_perl/5.8.3 -I /usr/lib/perl5/site_perl/5.8.2 -I /usr/lib/perl5/site_perl/5.8.1 -I /usr/lib/perl5/site_perl/5.8.0 -I /usr/lib/perl5/site_perl -I /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi -I /usr/lib/perl5/vendor_perl/5.8.4/i386-linux-thread-multi -I /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi -I /usr/lib/perl5/vendor_perl/5.8.2/i386-linux-thread-multi -I /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi -I /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi -I /usr/lib/perl5/vendor_perl/5.8.5 -I /usr/lib/perl5/vendor_perl/5.8.4 -I /usr/lib/perl5/vendor_perl/5.8.3 -I /usr/lib/perl5/vendor_perl/5.8.2 -I /usr/lib/perl5/vendor_perl/5.8.1 -I /usr/lib/perl5/vendor_perl/5.8.0 -I /usr/lib/perl5/vendor_perl -I . -I /s03/oracle/prodappl/au/11.5.0/perl /s03/oracle/prodcomn/admin/install/PROD_aqherp
txkFrmUTF8.pl INSTE8_SETUP 1
AutoConfig is exiting with status 7
Best Regards, -
OS Migration from Windows 2003 cluster to Windows 2008 R2 MSCS
We want to go for windows 2008 R2 server ( 64-Bit) MSCS by migrating from windows 2003 Cluster ( 32- Bit) . We are running on ECC 6.0 and oracle 10.2.0.2 DB.
Is it possible ?
Is it traditional System copy if so how to migrate the cluster ?
Regards> 2. If the oracle version is 10.2.0.2 then does it will support Windows 2008 R2.
You need at least 10.2.0.4 (you need to install that version with a separate DVD, you can't install with the normal Oracle DVD (10.2.0.1). See
Note 1303262 - Oracle on Windows Server 2008
Be aware of the fact that the normal standard support for 10.2.x is ending at end of july (you'll have to pay an extra maintenance fee if you continue to run that version) - see
Note 1110995 - Extended maintenance for Oracle Version 10.2
So if you now do a system copy to new hardware with a new os anyway, I would upgrade to 11.2.
Markus
Maybe you are looking for
-
Human Task - Notification Setting
Hi everyone I Want to customize the email message that will be sent to the Assignees. The message is as follows: Task <%/task:task/task:title%> requires your attention. Please access the task from the worklist application. Request ID: <%/task:task/ta
-
Inverting newsletter copy to meet PO regs
I prepared a one-page, printed two sides, newsletter in Microsoft Word 2007 using one of many available newsletter templates. It is designed to be a self mailer. How do I invert just one side of the page? Postal regs require that I do so. (Once I
-
Integrating Oracle Reports 9i to Oracle Forms 9i
im trying to integrate simple reports from oracle reports9i to Oracle form 9i using command buttom (when-button-pressed) the query from oracle reports : select seq_no,count(msg) from out_message where user_id='PCD' group by seq_no having count(msg)<>
-
Having issues with installing Windows XP on Boot Camp
I installed the latest firmware for my MBP along with Boot Camp. I then tried to install a copy of Windows XP that I got from my friend (we'll name him Mr.Limewire). Anyways, I've tried to use 2 different copies of Windows XP and Boot Camp does not d
-
How to select a procedure in package from crystal report
I want to select a oracle procedure in package from a crystal report. I can able to select stored procedure from crystal report if I check the option storedprocedure in file menu--option-SQL tab.