Migration from ISU to CRM

Hi,
We are populating SAP ISU via Emigall and proposing to replicate all customer data including BP, CA and Contract and all technical master data including CO, Premise and Device. This is a lot of objects and data to replicate from ISU to CRM which will mean our migration takes a long time.
Are there any other options to populating data into CRM? Would you advice LSMW load into CRM and Emigall load into ISU?
KR,
Michelle

Hi we are proposing to use Emigall (Data migration workbench) to load the following into ISU:-
BP
CA
Contract
CO
Premise
Device
Reg Structure
Documents
Dunning etc
We are proposing to use CRM middleware to replicate the following objects from ISU to CRM:-
BP
CA
Contract
CO
Premise
Device
My concern is that the replication from ISU to CRM is very slow and will be our bottleneck during migration weekend. I am looking for ways to speed up this replication including alternative ways of populating CRM.
KR,
Michelle

Similar Messages

From ISU to CRM

hi frnds
My requirement is below
I have created a BOR object in ISU which is related to CRM order item
and in which the import parameters are date and status
now when i enter them and execute object then according there should be reflected in CRM program crm_order_read but i dont know why these are not reflected
i have also checked the FM it is retueming the correct values to CRM
Can anybody has reason why these are not reflected.

Hi we are proposing to use Emigall (Data migration workbench) to load the following into ISU:-
BP
CA
Contract
CO
Premise
Device
Reg Structure
Documents
Dunning etc
We are proposing to use CRM middleware to replicate the following objects from ISU to CRM:-
BP
CA
Contract
CO
Premise
Device
My concern is that the replication from ISU to CRM is very slow and will be our bottleneck during migration weekend. I am looking for ways to speed up this replication including alternative ways of populating CRM.
KR,
Michelle

Initial Load of contract from ISU to CRM

Hi All,
We are working on the replication of contract from ISU to CRM.
We have done all the necessary setting,like assigning default product,running ecrm_generate_everh report etc
When we are running initial load on SI_CONTRACT,only single BDOC is getting generated which is error free but still it contains no data.
Since its without an error ,we are not able to figure out whats the error is.
Regards
Nikhil

Hello Nikhill,
Could you resolve the problem?? I've a similar error, the BDoc is empty. The table everh is filed but the fields contractpos and contarcthead have value '0000000000000000' i think that is the problem. ANd the recport ECRM_CHECK_EVERH say that are misiing contracts.
Could you help me please!!!
Thnks!!

Connection object repliction from isu to crm

Dear Experts,
I want to replicate the connection object from ISU to CRM could you tell me what are the configuration steps to be maintain in the CRM sytem so that the connection objects replicates to CRM.
Thanks & Regards
Boyz.
Moderator note: thread locked - no research done, available in other threads.

Hello,
Please see note 632749 for help with this issue.
Please also check the foloowing points:
1. Are there any contract account entries existing in the table 'TFK_BUAG_REF' (IS-U System).
2. Check the contract account entries in your IS-U system with the transaction 'CAA3'. Are they existing ?
3. The buag class entry in table 'TFK_BUAG_REF' (IS-U System) is corresponding to the buag class entry in your business agreement (CRM system).
I hope this is helpful.
Regards
Olivia
Edited by: Olivia Walsh on Jan 24, 2011 5:40 PM

Contract replication from ISU to CRM

Hi Experts
I have sucessfully replicated BP master data between ISU and CRM, Contract Account replication is done as well, i would like to replicate Contract from ISU to CRM. Any help will be highly appreciated.

Hello,
Please see note 632749 for help with this issue.
Please also check the foloowing points:
1. Are there any contract account entries existing in the table 'TFK_BUAG_REF' (IS-U System).
2. Check the contract account entries in your IS-U system with the transaction 'CAA3'. Are they existing ?
3. The buag class entry in table 'TFK_BUAG_REF' (IS-U System) is corresponding to the buag class entry in your business agreement (CRM system).
I hope this is helpful.
Regards
Olivia
Edited by: Olivia Walsh on Jan 24, 2011 5:40 PM

Classification View in BP is not replicating to from ISU to CRM

Hi All,
I am very new to SAP CRM Middleware. We are upgrading to CRM 7 in out project.
When we run a request load to replicate BP (Busines Partner) from IS-U to CRM, It successfully replicates all the data from ISU to CRM.
But only the Classification Data is not getting replicated to CRM. Please see screen shot sbelow:
ISU Screen shot: XD03--> Additional Data
In CRM after Replication:
Attribute 4 is not copied. Can anybody suggest me any solution to this problem?
Thanks in advance,
Suman

Hi Ramana,
You need to set up CRM middleware for Initial and delta load of Business Partners from R3 to CRM.
This link may help you ->
http://help.sap.com/saphelp_crm40/helpdata/en/1c/924555855849ba896b0af806cd343c/frameset.htm
Cheers,
Ashish

Migration from CoD to CRM.

Hi Experts,
I need to migrate Opportunity data from CoD to CRM on premise for my client.Could you please let me know if the table structure in CoD is same as that of CRM on premise? Any tips on the migration strategy would also be appreciated.
Regards,
Aneesh

Hi,
What version of CoD is your customer currently using?
Regards,
Parul

Replication of Business Partner from ISU to CRM

Hello,
I am creating the Business partner through 'BP' transaction and it is getting replicating to CRM,
But when I am creating the Buiness Partner through 'Emigall' transaction it is not replicating to CRM.
Also I added the many fields like u2018TIME_ZONE, ADDR_DATE_TO, ADDR_DATE_FROM, TEL_CNTRY, FAX_CNTRY etc.u2019 in the structure of business partner in 'Emigallu2019 transaction,
and the business partners were created successfully in ISU, but it is still *not replicating in CRM*.
Please help me to solve this issue.
Regards,
Darshana

Hi Darshana,
1st step: Check SAP delivery: IS Migration -> Settings -> SAP Settings
CRM_REPL_OFF X X Deactivate CRM Replication (only IS-U)
2nd step: Check project settings (superseding standard setting): IS Migration -> Settings -> Customizing Settings
- if you can't find the parameter CRM_REPL_OFF: standard setting is valid
- if there is a parameter CRM_REPL_OFF: check whether what the parameter value is (space or X)
Kind regards,
Fritz

Products are not migrating from R3 to CRM

Hi,
We have created a new products in R3.
those products are not migrating to CRM .
What could be the reason.
Points will be rewarded.
thanks

Hi
Could you plz help me the process you are following to donwload products from R/3 to CRM.
Kinldy note ..few things:
1.Middleware set up to be done.
2.Taxes to be mapped correctly for products.
3.did you download the DNL_CUST_PROD0...if you are using product hierarchy did u download..DNL_CUST_PROD1,DNL_CUST_PROD3
4.What is the error message you are getting in SWM01 for the BDOC type PROD
UCT_MAT?
if you have downlaoded these cutomizing objects...then use initial donwload (R3as) with object name "MATERIAL" ..these will bring all products from R/3..You can also use filters to do a selective download.
Kindly provide these details..
Regards
Sayantan

Need to help in initial data loading from ISU into CRM

One our client has requirement as
All ISU data applicable (BP, BA, the appropriate technical data, Contracts, Products, Product Configuration and their correspoinding price Keys and Price Amount) to CRM should be loaded into CRM as the part of the intial load.
Eventhough ECRM_GENERATE_EVERH in ISU but its documentation is not available.
Is any provision like Report or RFC or function module present in SAP.
I would appreciate for you all quick reply with positive and appropriate solution. mailto [email protected]

Got my answer.We can clear the data using MDX.

Delta Download from ISU BP to CRM BP doesn't work

Hi Experts,
We are currently new implementing a CRM7.0 system which is connected to an existing ISU system. We now have an issue about the BP delta download from ISU -> CRM.
Replication Scenario:
ISU BP -> CRM BP, NOT SD Customer -> CRM BP. As ISU is the leading system to create BPs and in ISU a MKK BP will be created first then a SD customer will be generated based on a template. So the change of a BP is via BP transaction for MKK role, not via XD02 SD Customer.
Issue:
The middleware setting is done and initial download from ISU BP -> CRM BP is done and successful. However when I trying to change a BP (change a MKK BP via BP transaction) in ISU, the change is not replicated to CRM (no queues, no BDOCs). It seems the delta download is not triggered at all.
However, I have maintained all the settings based on the ISU Specifics on the Set-Up-and-Load Guide for BP. So the followings are maintained:
- ISU: COM_BUPA_CALL_FU maintained based on the Guide
- CRM: CRMC_BUT_CALL_FU maintained based on the note 757955
- CRM: V_SMOFEVOB maintained based on the Guide
- ISU: BTE table (T-code: BF31) maintained based on the Guide
After setting above, the initial load is working (necessary table like CRMCONSUM, CRMRFCPAR etc. are maintained otherwise the initial download won't successful). However, the delta download from ISU BP (MKK) to CRM BP doesn't work.
The only uncertain thing for me is the setting for ISU : CRMC_BUT_CALL_FU. In the Guide only one sentence saying CRMC_BUT_CALL_FU needs to be maintained both in CRM and ISU and details refer to note 757955. However, the note 757955 only talks about FMs for CRM not for ISU/ECC. So in ISU/ECC the table CRMC_BUT_CALL_FU I activated for the following entries:
BPOUT BUPA 0100000 COM_BUPA_MWX_CREATE_MAIN
X
BPOUT BUPA 1000000 BUPA_OUTBOUND_MAIN
X
BPOUT BUPA 2000000 BUPA_CREATE_CHANGE_POINTER
X
BPOUT BUPA 3000000 BUPA_OUTBOUND_ALE_MAIN
X
BPOUT BUPX 1000000 MDS_BUPA_OUTBOUND
X
CLEAR BUPA 0100000 COM_BUPA_MWX_CLEAR_FLAGS
X
CLEAR BUPA 1000000 BUPA_OUTBOUND_CLEAR_FLAGS
X
CRMIN BUPA 1000000 BUPA_INBOUND_MAIN_CENTRAL
X
CRMIN BUPA 2000000 ABA_FSBP_INBOUND_MAIN
X
CRMOU BUPA 1000000 BUPA_OUTBOUND_BPS_FILL_CENTRAL X
CRMOU BUPA 1000010 ABA_FSBP_OUTBOUND_BPS_FILL
X
CRMOU BUPA 2000000 ABA_FSBP_OUTBOUND_BPS_FILL
X
MERGE BUPA 1000000 MERGE_BUPA_CENTRAL
X
MERGE BUPA 2000000 MERGE_BUPA_FINSERV
X
MERGE BUPR 1000000 MERGE_BUPR_CENTRAL
X
PXYIN BUPA 1000000 BUPA_INBOUND
X
XIIN BUPA 1000000 ABA_BUPA_MAP_PROXY_TO_DDIC
X
XIIN BUPA 2000000 ABA_FSBP_MAP_PROXY_TO_DDIC
X
XIIN BUPA 2100000 ABA_FSBP_MAP_PROXY_TO_DDIC_1   X
XIIN BUPA 3000000 ABA_FSBP_MAP_PROXY_TO_DDIC_1   X
XIIN BUPR 1000000 ABA_BUPR_MAP_PROXY_TO_DDIC
X
XIOUT BUPA 1000000 ABA_BUPA_MAP_DDIC_TO_PROXY
X
XIOUT BUPA 9000000 ABA_FSBP_MAP_DDIC_TO_PROXY
X
XIOUT BUPA 9000010 ABA_FSBP_MAP_DDIC_TO_PROXY_1   X
XIOUT BUPR 1000000 ABA_BUPR_MAP_DDIC_TO_PROXY
X
Not sure if the above setting is correct or not (some of the setting may not necessary, is that will impact the delta download from ISU to CRM)
Also what's the purpose of maintain two tables in ISU/ECC (COM_BUPA_CALL_FU and CRMC_BUT_CALL_FU)?
Also I have read some notes that the ISU BP -> CRM BP delta download is not triggered by above tables, it is triggered by BADI PARTNET_UPDATE, is this true, a bit confused.
I am looking forward a solution from you experts.
Thanks,
Laurence

Any inputs experts?

Update CRM contract from isu contract

Hi!!!
I'm try to update the data of crm contract from sap isu contract, but isn't works fine, the status and the description of CRM contract is not updated. The Bdoc SI_CONTRACT is generated correctly, and the Badi's DOWNLOAD on ISU and CRM are enhanced, but the info is not updated in crm when initial load is launched or when a move-out it's do it in isu.
Can you help me please?
Regards,
David

Hi David,
Even though you have a green Bdoc it doesnt mean that the information was updated correctly in CRM, it simply means that the Bdoc passed the information to the queue. Check if there are any sysfails in the queues - you get the queue name from the Bdoc - and also if there are any dumps that might be related. Have you ever been able to load data from ISU to CRM?
Kind regards,
Vanessa.

IPC error when displaying product config for order replicated from ISU

Hi all,
I am trying to set up ISU contract replication from ISU to CRM and I am having the problem sending product configuration. I am able to send all the nessesary settings for product config from ISU: when I look in resulting Bdoc in smw01 I see correct CUVAL values, CUCFG and CUINS. CRM order gets created without no problem. However, when I try to go to product configuration tab while displaying my order I see error message:
ISA Framework: Internal Error: java.lang.NullPointerException
I assume something might be wrong with the configuration values I am sending, however I have no idea how to get more details what caused this error. IPC apparently runs on separate server and I do not have direct access to it.
May be somebody can give me a hint where to look or what to do?
Any help is much appreciated,
Vitali

Hi Vitali,
Have you resolved this error? I have the same message (but under different circumstances) and am curious how to resolve it.
Thanks,
Peter

Data Migration from CRM 5.0 to CRM 7.0

Hi Friends,
We are into a re-implementation on CRM 7.0. The old system was on CRM 5.0.
Since this is not an upgrade, the data will not copied over from the old system into the new system.
So, now I would like to know how to migrate data (master/transaction) from CRM 5.0 into 7.0.
I have read that we can make use of BAPI/LSMW/IDOC/XIF adapters to push info into CRM.
But, the customer wants all the historical data to be in the new system.
I think master data can be handled.... but how to migrate the transaction data?.... i mean the number ranges/document flow.. and other relationships.. how can we maintain the same links into the new system?
If it was a migration from legacy system into the SAP CRM, we could have gone ahead with new number ranges etc... but this migration is from SAP to SAP.
Also, we will have ECC6.0 connected to CRM 7.0. ANy additional things to be taken care of when the connection is live in DEV/QA/PROd instances?
Any pointers to this ?

Hi Gary,
As per my understanding, your data migration involves quite complex scenarios covering the CRM and ERP box. As the customer needs the old data to be present in the new implementation, the old data needs to be migrated from the CRM 5.0 to CRM 7.0. For the migration to happen, you need to setup the customization (like the number ranges,Condition Data Tables, etc ). Then only you can proceed with the data migration. Also, you need a proper backup plan as this involves proper backup of the data.
Once the setup is complete, you need to configure the ECC6.0 with the CRM7.0 system. Here also, you need to do a lot of settings and performing the Initial loading of the Adapter Objects. But before you proceed with the entire operation, the entire system landscape must be properly defined with appropriate settings.
My recomendation is to take help of SAP Consultants and data migration experts as they are the best persons to guide you on this. Also it would be great if you can go through the SAP Best Practices documents which are best repository documents to guide you on this.
Have a look on this link for an overview of the CRM Data Migration
http://help.sap.com/saphelp_crm60/helpdata/en/1a/023d63b8387c4a8dfea6592f3a23a7/frameset.htm
Hope this helps.
Thanks,
Samantak.

Business Partner not replicating automatically from ISU system to CRM

Hi All,
        We are working on transferring BP from ERP to CRM. Following are the main ways that we are using for the same :
1) We are creating reference customer with role Sold-to-party in transaction VD03 using internal no range.
2) Then we are creating ISU BP using the internal same number range and giving the above created customer no as reference customer and finally saving it
3) We have maintained the settings in PIDE from R/3 to CRM as :
Sold-to-party     B   ZD02 External Checked
DEBI                B   ZD02 External Checked
We are using BUPA_MAIN as Bdoc.
I get the follwing Bdocs in CRM system :
1) In SMW01 in CRM I am getting the reference customer created in Step 1 as automatically replicated to CRM and in Success state
2) Also I get the Bdoc in Error State for ISU BP created in Step 2. Then if I try to pull the BP it comes in Success state.
My problem is that the BP Bdoc should automatically come in Success state in CRM.
Please help me solve this problem.

Hi,
We also have the same approach of BP, CA and contract creation. These data, after creation in ISU are replicated to CRM. We had an issue while replicating the Contract. The contracts were not getting replicated if the contracts donu2019t have the Service Provider and external service provider information. We donu2019t require to capture this information at contract. We are now forced to capture have this information at contract level just for the replication purpose. Is it mandatory to have the service provider information in contract for the replication of contract to CRM.
Regards,
Murali

Migration from ISU to CRM

Similar Messages

Maybe you are looking for