Migration from Linksys G to Airport not working

I'm upgrading from a Linksys WRT54g to an airport extreme. The previous setup was the linksys and a 4 port hub with a combination of wired and wireless connections. Our apple server, printer and a few other devices are hardwired. We have about 10 imacs and 1 Vista laptop. All the wireless imacs and vista need to connect to the hardwired server to run a filemaker database and be able to print to the hardwired printer via wireless connection.
Some imacs are running OS 10.4.11 but that should still work with the AP extreme since it's multi mode for wireless g and N.
The airport extreme and an 8 port netgear Gb hub are replacing the previous setup.
I've used the Airport utility on a 10.5.8 imac to find and configure the Airport and most macs find it but I still don't have internet or lan connection. I'm using WPA because that's all the older macs will support. The internet connection is a T1. I'm also getting the 169.xxx.xxx.xx ip address for the airport by default. How can I change this to 192.168.1.1 and still use DHCP?
I'm also getting kernal panics on several of the G5 imacs while switching airport connections and/or after configuring this new wireless connection.
Are the any special considerations I should be aware or a firmware upgrade? I'm following the instructions very carefully. Doesn't the Airport extreme provide the DHCP for the ipv4 connections and shouldn't the wireless macs connect to other hardwired macs with no problem?
Thanks for any advice.
budgen

Welcome to the discussion area, budgens!
Can't answer all of your questions, but can offer some assistance.
I'm also getting the 169.xxx.xxx.xx ip address for the airport by default.
This is a self-assigned IP address which indicates that the AirPort is not connected to or is not currently communicating with a valid Internet connection.
How can I change this to 192.168.1.1 and still use DHCP?
You will continue to see the 169.x.x.x error until you have a good Internet connection.
By default, the AirPort Exteme will use the 10.0.1.x range for local network IP assignments. If you want to change this to the 192.168.x.x range, you would do the following:
Open AirPort Utility - click Manual Setup
Click the Internet icon
Click the DHCP tab
Change to the 192.168.x.x range on this page
By default, the AirPort Extreme will be at 192.168.1.1 if you use this range and have a valid Internet connection.
Message was edited by: Bob Timmons

Similar Messages

Post Migration from SP2010 -Attach File Button not working in any list new/edit forms

Hi,
We have migrated the SharePoint 2010 farm to Sharepoint 2013 on last saturday and we are noticing an interesting issue after the migration .
On any custom list on any web application ,When we create a new item,if we click on attach file button in the ribbon,nothing shows up on the screen.
In the browser Dev Tools its showing an error message as "Cannot read Property style of null".
This is happening on a javascript (form.debug.js) on line No : 5276
(document.getElementById("partAttachment")).style.display = "block";
There is no element rendered in html with id "partAttachment",which is causing this error to happen.
Solutions tried are
1) Modified the List Advanced Settings to disable and enable the attachments ,which did not work
2) Ran the Sharepoint Configuration wizard which did not fix
3)Tried reset the site definition for all pages in the site from site settings
4) Deactivated and activated all the activated features in the site collection
Its an OOB List New Form,no customizations has been done.
Similar error occurring with List Edit form as well
when you click on the List Item in the List default view when you navigate to the list and when you click on attach file,a popup dialog to upload attachments appearing,However its not working when you
navigate into the list item and tried to upload attachment.
Please help if any Solutions / thoughts

Hi Christopher,
Thanks for your reply,
Farm Information
OS: Windows Server 2008 R2 SP1 Enterprise
SQL: SQL 2008 R2 SP2
SP -SharePoint 2013 with no CU applied
Method,we used is restored the content DB from SP2010 and attaching to SP2013 SQL Server
Site Collection is in 15 mode
It happens on new site collection even though its not migrated site.
Server is 16GB RAM 8Core Processor
If we create a new form from designer,attach file link is working
OOB New form.aspx is having List Form webpart
Custom New Form.aspx creaed with designer has data form webpart
if we create a new sharpoint site collection in 2010 mode,its working fine without any issues
Interestingly,all the javascript files loading were debug.js,Not sure how its loading all debug.js files

HT5622 my apple id is not working when i sign in from my laptop it works but when i sign in from my iphone4 then its not working it gives the message of "your aapleid or password is incorrect"? how can i solve this problem please help

my apple id is not working when i sign in from my laptop it works but when i sign in from my iphone4 then its not working it gives the message of "your aapleid or password is incorrect"? how can i solve this problem please help

Hey nocillado,
Thanks for using Apple Support Communities.
It sounds like you have 2 things you want to address. These articles can help you use iCloud with your existing Apple ID.
Get help activating your iPhone
http://support.apple.com/kb/ts3424
Using your Apple ID for Apple services
http://support.apple.com/kb/ht4895
Using the same Apple ID for Store purchases and iCloud (recommended)
Have a nice day,
Mario

BIP report security from Dashboard to Publisher is not working

Hi ,
I created a BIP report(.xdo) and placed it on Dashboard as a link . As admin , I can see the report . As a user , I am able to get into publisher but not able to see the report . Iam getting the below error message .
Error : Unauthorized Access: please contact the administrator.
I suspect that security model from Dashboard through BIP is not working . I tried searching the online resources but couldnt find right help .
Iam a newbie for BIP , I followed the regular BIP guides , configured eveything as per the docs and things work as admin . But I want to test the security as user .
Where Iam doing wrong , Any ideas please help .
Thanks
Karthik

Hello Vijay ,
I have grant permissions to the user and the report in BI webcatalog and also in BIP under admin tab I have addes the role which the user belongs to and also the shared folder . Still the problem exists.
My BI presentation servcies security is working . My user security is also working , all that I need is the user should be able to see the report when he clicks on BIP link placed in dashboard.

Why copy option from recent call numbers is not working on ios7 [recent call logs in phone]?

why copy option from recent call numbers is not working on ios7 [recent call logs in phone]?

Here is a copy of my expressions and a copy of my data. The expressions match up going from left to right
Code.CalcPTD2(Lookupset(FORMAT(Fields!REALDATE.Value,"Long Date"),FORMAT(Fields!CallbackDate.Value,"Long Date"),Fields!DailyHours.Value,"DataSet4"))
sum(Code.CalcPTD2(Lookupset(FORMAT(Fields!REALDATE.Value,"Long Date"),FORMAT(Fields!CallbackDate.Value,"Long Date"),Fields!DailyHours.Value,"DataSet4")))
count(Code.CalcPTD2(Lookupset(FORMAT(Fields!REALDATE.Value,"Long Date"),FORMAT(Fields!CallbackDate.Value,"Long Date"),Fields!DailyHours.Value,"DataSet4")))
PUBLIC SHARED FUNCTION CalcPTD2(LookupArray AS OBJECT) AS INTEGER
     DIM i,Total AS INTEGER
     Total = 0
     FOR i = 0 to UBOUND(LookupArray)
           Total = Total + CINT(LookupArray(i))
     NEXT i
NumberTimes =   NumberTimes +1
RETURN Total
END FUNCTION

Update to 10.6.8 and HP F2100 and D2400 Printers stopped working. Restored 10.6.7 and printers from Install CD's but not working, Same with scanner

Help....
Updated to 10.6.8 and HP F2100 and D2400 Printers stopped working.
Restored 10.6.7 and printers from Install CD's but not working.
Same with F2100 scanner
Am I glad I kept Windows desktop as without it I would be scre**ed now
What is going on with this latest update as its like a return to Windows with things crashing or hanging up every few minutes????
On a MacBook Air that has not been updated everything still works so what has 10.6.8 done and why won't the restore to 10.6.7 work?
Steve

None of those things you mentioned were what I suggested.
I'm guessing the "ctrl click in printer preferences" means you Reset the Printing System?
If so, that is what I would have suggested if deleting it by selecting the ( - ) button and then adding it with the ( + ) button.
But, if HP has a fix, it likely needs to update its drivers.

My Itunes account was hacked and my Apple ID was disabled. I followed the instructions from APPLE to backup and restore from Itunes but that did not work. Any suggestions?? Thanks!!

My Itunes account was hacked and my Apple ID was disabled. I followed the instructions from APPLE to backup and restore from Itunes but that did not work. Any suggestions?? Thanks!!

Are you saying that you contacted Apple support and they instructed you to backup and restore your iPad? Or do you mean that you picked up this information from an online support article? If you spoke to an Apple rep or received these instructions via email, contact them again for further help.
I fail to see how restoring your iPad would enable yoyr Apple ID.

My macbook is back from repairs. It is not working with my apple led cinema display. It was working prior to the repairs on the laptop. Is there a setting I don't know about that might have been changed?

My macbook pro is just back from repairs. It is not working with my apple led cinema display. I have followed the directions in the cinema display manual. am I missing something?

Take a look at the Displays preference panel to see if everything is ok, particularly the resolution and refresh rate. Displays will probably try to put the panel for the ACD on the ACD where you won't see it. So click "Gather Windows" to get the ACD panel on to your macbook.
One more thing, make sure you fully seated the mini displayport plug. They can be sneaky little devils in that they need to be fully pushed in.

ITunes drag to import new songs in library or to create playlists from folders on windows does not work!

iTunes drag to import new songs in library or to create playlists from folders on windows does not work!
WHY? I have to solve, how can I do? Thank you

up

I bought an unlocked iphone 4s from dubai but it does not work with an indian idea sim..help

i bought an unlocked iphone 4s from dubai but it does not work with an indian idea sim..help

If you are both on the T-mobile network, the sim card should work. If you did a Erase All Content and Settings, then she should be at the point of activation as a new device...talk to T-mobile and be sure the sim she is using is a valid sim card.

•I have just bought a Toshiba external hard disk to back up all my work from my macbook and its not working! I have checked the hard disk

•I have just bought a Toshiba external hard disk to back up all my work from my macbook and its not working! I have checked the hard disk

its not working: (sorry for being so ambiguous), the computer recognises it, it comes up on my desktop, when i open it and try and drag a file across, it is unable to go into the drive, there is just a symbol indicating 'no' (i've read the instructions from Tosheba and there is no help). I have not partitioned the drive using the GUID partition scheme - i dont know what this means?!

Whether using Oracle after migrating from MySQL be easy or not?

Though oracle is tough secured one, I don't know exactly the complexity of using Oracle database. Using MySQL 4.1.22 in my website https://www.puntercalls.com/ . Though the site is based on providing share market tips, it deals with a huge amount of stock market data and in much more real time basis hand-to-hand with NSE and BSE info which means a tough security is the utmost demand of the time.
My question is whether using Oracle after migrating from MySQL be easy or not. You can check my site at https://www.puntercalls.com/ for different real time data updation parts.
Kind suggestions are greatly appreciated in advance!
Edited by: 968684 on Oct 31, 2012 7:04 AM

Hi,
As you are really asking about how to setup and use securioty features in an Oracle database it woul db ebetter to raise the question in this forum -
Forum: Database Security - General
Database Security - General
They will have more knowledge about Oracle security features and which it would be best for you to use.
Regards,
Mike

Migration from PC with MA did not end. Had to shut down MacBookPro. After restart no new user was created. Can't find the transferred data (35 GB). Would like to delete it.

Migration from PC with MA did not end. Had to shut down MacBookPro. After restart no new user was created. Can't find the transferred data (35 GB). Would like to delete it.

iTunes is required to initially activate the phone. Back when the iPhone 3G was sold, you would take it out of the box and see a "Connect to iTunes" screen. She HAD to connect to a computer in order to begin using the phone. Does she remember what computer this was?

My speakers from my iPhone 4S is not working I'm clicking on the buttons on the side nd the volume is not even showing getting louder or lower but when I plug in my ear phones I can hear it juss happen out of no where what sould I do ?

My speakers from my iPhone 4S is not working I'm clicking on the buttons on the side nd the volume is not even showing getting louder or lower but when I plug in my ear phones I can hear it juss happen out of no where what sould I do ?

Your iPhone charging port may have a minor short, causing iPhone to falsely sense it is connected to a dock turning off its speaker. Clean iPhone charging port with a clean dry toothbrush.

TS1702 If I purchase an app from iTunes and it does not work or does not meet expectations, is there a way to be refunded the cost of the app?

If I purchase an app from iTunes and it does not work properly or meet expectations, is there a way to receive refund for the cost of the app?

First contact the Developer of the App...
If no joy...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Migration from Linksys G to Airport not working

Similar Messages

Maybe you are looking for