Migration from MDD 10.2.8 to MBP on SL

Hi all
the new MBP arrived yesterday, but I was stuck in trying to migrate info to the new MBP. First off, the MBP does not have a Firewire 400 port, and the MDD does not have an 800 port. I then tried to do it through my wireless network, but SL wanted me to plug in hte install disk to the MDD. I couldn't figure this out. The MDD is on ethernet, and the MBP and the powerbook both work over the wireless, why do I need the install disk for MDD?
I understand there are some cautions about migrating from PPC to intel base, but I'm not trying to do anything major, mostly just trying to transfer codecs, accounts, settings, etc. There HAS to be an easier way, these are macs, right?
All suggestions, recommendations and flames are appreciated.

you can get a firewire 800 to firewire 400 cable, put the old computer in target mode and transfer that way. but it should also be possible over network although I would recommend you connect the computers by a ethernet cable for a much faster access. Normally, you don't need the install disk at all when migrating but this may be different for migrating from 10.2 which is quite old. does it even have a migration assistant application? I suggest you follow the instructions given by Migration Assistant. lastly for caution about migrating from PPC to intel see this post
http://discussions.apple.com/thread.jspa?threadID=435350&tstart=0
Message was edited by: V.K.

Similar Messages

Migrate from mac mini mountain lion to mbp lion

Any suggestions on how to migrate a mac mini on mountain lion to a macbook pro on lion. Booting from time machine doesn't work because it only wants to restore to the original computer. Migration assistant doesn't show the backup drive as a source for the restore. Not sure how to proceed.

Let's backup, because when I said that earlier I thought you were leaving Lion on the MBP. So, you should be able to erase the drive in the MBP, then boot from the Time Machine backup. If you have 10.8.2 backed up, then there is an invisible copy of the Recovery HD. Connect the Time Machine backup drive to the MBP.
Boot Using OPTION key:
1. Restart the computer.
2. Immediately after the chime press and hold down the "OPTION" key.
3. Release the key when the boot manager appears.
4. Select the Recovery HD on the Time Machine backup drive.
5. Click on the arrow button below the icon.
Once it boots up you can use the main menu to first repartition and reformat the MBP's drive, then restore the Time Machine backup to the MBP.
Sort of sorry to go in such circle to get to this point, but I just did not understand the goal. Forgive my being so thick-headed today.

Migration from old MBP to new MBP

I am curious. I have set up 10GB of my hard drive on the original MBP for the Windows. In the migration from the original MBP to the new MBP, does the Windows hard drive get migrated over as well?

Gordon:
Welcome to Apple Discussions.
To the best of my knowledge Migration Assistant will Migrate OS X. If Windows is installed in an emulator such as VMware Fusion, it will be migrated, as VMware Fusion is an application that runs in Mac OS X. If it is installed in Boot Camp you will need to clone it separately using a utility like WinClone.
cornelius
Message was edited by: cornelius

New MBP. Used migration assistant in setup Safari crashes on launch OS10.7.4 Safari 5.1.7 Had Safari 6 on system I migrated from. help?

New MacBook Pro. Came with OS 10.7.4
Used Migration Assistant in initial set up
Safari crashes immediately on launch
System I migrated from, had Safari 6
Don't see any way to reload or to update Safari 6 on the new MBP
Software Update says all software on this computer is up to date

Updating to Safari 6 for Lion may help.
Click here > Safari Quits Every Time Opened: Apple Support Communities
Then click the link posted by: gregoryfromcork
That will automatically download this file > Safari6Lion.pkg.download
Now quit Safari.
Go to your Downloads folder and double click that file and follow the instructions for installing.
Then restart your Mac, try Safari.

MacBook Pro 2011 - Migrated from MBP that had Flash but now it won't work

Does anyone else have a solution to this issue that does not involve doing a fresh install of Snow Leopard? There was another thread in this forum where the OP indicated that they did a fresh install of SL and that solved the issue. However, that solution is not acceptable to me.
I did a system migration from a Time Machine backup (from my old MBP which was also running 10.6.6) when I purchased my new 2011 MacBook Pro last week. All my applications seemed to be working normally until I attempted to watch a YouTube video in either Safari or Chrome. In both browsers, all I get is a black screen where the video should be playing.
I downloaded and installed the latest version of the Flash Player for Safari and I am not able to manually update the Flash Player for Chrome since that browser keeps the Flash Player up-to-date automatically. The black screen persists when attempting to watch a video on YouTube. I cleared the site cache for the Flash Player just in case something was buggy there, but the problems remains.
The last thing I tried was to remove Flash Player for Safari entirely by running the Adobe Flash Player Install Manager and choosing "Uninstall." I then re-installed Flash Player but the problem persists.
Finally, I am not running any third-party firewall software. When I right-click on a YouTube video, the menu says "Movie not loaded..."
Any assistance would be much appreciated!

Created a new user account on the machine and the problem remained when logged in as the new user.
For giggles, I decided to try to pull up a YouTube video on my wife's 2010 MBP. She hasn't been complaining that she was unable to load content. I was astonished to find that Safari on her laptop is exhibiting the same issues that mine is when going to YouTube in Chrome or Safari. . .black screen where the video should be.
I know I haven't changed any configurations on our router, so I doubted that was the culprit. I can't imagine that an ISP would block YouTube, of all things. To rule these things out, I went back to my laptop and tethered it to my 3G smartphone. Still, even using the cell network, YouTube videos are "blacked out."
Also, I run several VMs, so I tried loading YouTube in Chrome and IE in Windows 7 and they both exhibit the same problem. At this point, I'm dumbfounded that both mine and my wife's MacBook Pros have the same problem when connecting to different networks and the problems persist across OS'es.
Any other suggestions you can think of aside from making a trip to the Apple Store?

Migrating Users & Data from a Powerbook G4 to a MBP

OK, I'm getting a refurb. MBP and I'm going to need to transfer over my stuff from the Powerbook G4 to the MBP. The thing is...both my 400 and 800 FW ports in the Powerbook have ceased to function, so Target Disk Mode will not work for me. I could use the Ethernet form of transfer to get everything over but that implies that the MBP will have to be up and running and have it's network settings all configured in order for it to be "seen" on the network. Is this the case? Or, upon startup of the MacBoook Pro, will I be prompted to migrate data & users via Ethernet?
In the past, I've been able to use Target Disk Mode and I'm familiar with that procedure, I just don't know what to expect via an Ethernet migration. Can anyone enlighten me?
Thanks

A Basic Guide for Migrating to Intel-Macs
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking
will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Target Disk Mode.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- Migration Tips and Tricks;
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/ (copy the whole folder)
/Home /Library/Calendars (copy the whole folder)
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.
Revised 1/6/2009
Connect the two computers via FireWire to do any data transfer whether manually or with Migration Assistant.

Migrating from G4 PowerBook to i7 MBP: Use assistant?

Just received my new 17" i7 MBP and I'm planning to migrate from my old PowerBook this weekend. Would I be better off using Migration Assistant for everything, or just for some things, or not at all? I don't mind re-installing applications from scratch if that's the healthier way...

Jo,
Using MA would be fine however I would only use it for your data files. I don't recommend using it for migrating your applications, for those you should manually install each app which also give you the opportunity to update those that need it. There are many many threads about migrating from PPC machines to Intel based machines, you may want to look though some to see if you can pick up some valuable hints.
Regards,
Roger

Migrated from MBP with moutain lion to new macbook pro retina display and now I have lion os

After migrating from a time machine backup and logging in (had problems with that too and had to restart user password) the os version is 10.7.4 when it should be 10.8.2
Went to the app store and I have to pay again to get the upgrade.. Do i have to pay again???
Thanks!

Hi again, Juan.
OK this is just a guess but I believe that when you set up your rMBP from your old MBP you used TM restore not Migration Assistant. What happened is that you installed your old system OS10.7.4 and all files.
Using Migration Assistant (MA) would not have overwritten your OS.
See this taken from Finder Help....
Recover your entire system
If you use Time Machine to back up your computer, you can recover your system’s contents if your system or startup disk is damaged.
Important: Only use your Time Machine backup to restore your system to the computer that is the source of the backup. If you want to use your backup to transfer your information to a new computer, use Migration Assistant.
Transfer your info from a computer or disk
If you’re restoring your system because of a problem with your startup disk, repair or replace the disk before following these instructions.
Make sure your Time Machine backup disk is connected and turned on. If your backup disk is on a network, make sure your computer is on the same network.
Choose Apple menu > Restart. Once your Mac restarts (and the gray screen appears), hold down the Command (⌘) and R keys.
Select “Restore from a Time Machine Backup,” and then click Continue.
Depending on your type of backup disk, do one of the following:
If you use an external disk, select it and click Continue.
If you use a Time Capsule, choose your AirPort network from the AirPort menu on the right side of the menu bar, and then select your Time Capsule and click “Connect to Remote Disk.”
If you use a network disk, select it and click “Connect to Remote Disk.”
If necessary, enter the name and password you use to connect to your backup disk, and then click Connect.
Select the date and time of the backup you want to restore, and then follow the onscreen instructions.
After you restore your system from a Time Machine backup, Time Machine may perform a full backup at the next scheduled backup time. This is normal. Time Machine resumes incremental backups after the full backup is completed.
I suggest you make an appoint at the Genius Bar at a local Apple Store and they will help you restore your computer. Make sure you take in your old MBP and your Time Machine back up disk as well.
Do not use instructions above for a TM restore now, because it will only reinstall Lion 10.7.4 not ML 10.8.X.
You need to reinstall ML first and then I think all of your problems will go away.
So did I guess right? Did you launch TM and restore or did you launch Migration Assistant to move files?
Hope this helps, if you cannot get to the Apple Store, I can try to walk you through reinstalling ML, but first we need to download a copy of ML.

Migrating from 2007 MBP to 2009 unibody 17" MBP

Hi all, hope you're all well!
I'm expecting delivery of my new 17" Unibody MacBook Pro this week and have heard conflicting things as to how best migrate my data from the old 2007 15" Intel MBP to the new machine and hope you kind folk can clear it up for me.
If I choose to migrate all my old data to my new Mac, will the Time Machine backup stay intact, and will the Migration Assistant handle this?
I'm concerned that my older versions of iLife and OS X will overwrite the newer versions, in effect getting rid of newer software and new system prefs like the multi-touch, is this completely unfounded and paranoid?!
I've heard on the discussions that some people have had problems with this method, and that all isn't as smooth sailing as Apple's literature will have you believe, is there anything I should look out for?
Also, if anyone has any tips, I have a Boot Camp partition running with Parallels on my old machine, what's the best way to get this intact to my new machine?
Thanks in advance for your time and answers!
Best
A.

Well the new Mac came (it is beautiful) and the Time Machine migration went off without a hitch! Don't know what the problems people have been experiencing are all about.
Now to make a new Boot Camp partition which is fine, the only sensitive data worth saving on that is my Fallout 3 save games!

Migration Assistant from Tiger Mac to new Leopard MBP can't see disk

Hi,
I just bought a new MacBook Pro and am trying to migrate from my Tiger-based (10.4.10) dual 1 GHz Mac (mirrored-drive door) desktop machine. The boot drive on the Tiger machine is actually partitioned into an emergency boot drive of a few GB and my main working drive ("Macintosh HD"). When I run Migration Assistant (MA) on my MBP (after connecting the 6-pin Firewire cable and restarting the Tiger Mac in target disk mode), the MBP sees only the emergency boot-up partition and not the main working partition from which I want to migrate.
I tried MA on my MBP connected to a different Mac with no HD partitions, and it sees "Macintosh HD" just fine, so I think all the new hardware is okay as well as the Firewire cable.
Any ideas?
-Eric

Thanks for the info. I do know something about this (being a HW engineer), but I would have thought that the IDE master/slave jumpers would affect all the partitions on the disk. Since my emergency-boot partition is visible, I take that to mean that the IDE master/slave jumper issue is a non-issue for me.
I don't know if this helps, but here's what Disk Utility reports about the disk (not the volumes residing on it):
Name : ST380021A
Type : Disk
Disk Identifier : disk1
Media Name : ST380021A Media
Media Type : Generic
Connection Bus : ATA
Connection Type : Internal
Connection ID : Device 0
Partition Type : Applepartitionscheme
Device Tree : pci2/ata-6@D/@0:0
Writable : Yes
Ejectable : No
Mac OS 9 Drivers Installed : Yes
Location : Internal
Total Capacity : 74.5 GB (80,026,361,856 Bytes)
S.M.A.R.T. Status : Verified
Disk Number : 1
Partition Number : 0
Now, onto the partitions which I know less about.
Here's what Disk Utility says about the Macintosh HD partition:
Name : Macintosh HD
Type : Volume
Disk Identifier : disk1s10
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : pci2/ata-6@D/@0:10
Writable : Yes
Universal Unique Identifier : E6E9B335-60D0-3F06-97F9-2A9BAC522106
Capacity : 68.4 GB (73,411,137,536 Bytes)
Free Space : 819.5 MB (859,291,648 Bytes)
Used : 67.6 GB (72,546,123,776 Bytes)
Number of Files : 367,638
Number of Folders : 74,198
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 1
Partition Number : 10
Here's what Disk Utility says about my emergency-boot partition:
Name : Clean Boot
Type : Volume
Disk Identifier : disk1s12
Mount Point : /Volumes/Clean Boot
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : pci2/ata-6@D/@0:12
Writable : Yes
Universal Unique Identifier : 4A704075-200F-3CCB-B8ED-E7FEEDB655EC
Capacity : 5.9 GB (6,345,846,784 Bytes)
Free Space : 3.8 GB (4,133,232,640 Bytes)
Used : 2.1 GB (2,212,093,952 Bytes)
Number of Files : 76,846
Number of Folders : 19,664
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 1
Partition Number : 12
I don't know how to determine from the above what the "first" partition would be. I don't know how to post an attachment here otherwise I'd show a screen shot, but when I got into Disk Utility's partition tab, the emergency-boot partition (called Clean Boot) shows up at the bottom of the space indicating all of the HD's space, and Macintosh HD shows above Clean Boot.
So what are my options? Can I repartition w/o loosing Macintosh HD (I'm willing to loose the other partition Clean Boot)? Any way to change the partition numbers?
I was thinking of cloning Macintosh HD to another HD and then migrating from that. Any experience with that?
Thanks, Eric

HT204350 Migrating from a 2010 MBP to a 2013 iMac - stuck halfway through???

I have begun migrating from a 2010 MBP to a 2013 iMac after installing mavericks on both. They are connected by ethernet. The MBP isn't updated to the latest version because it was installed from a previous copy from apple. The migration has started and is stuck on 1 hour19 mins, what should i do? is it safe to somehow stop the migration process? or is it best to leave it be for a few hours or something? i had a lot of trouble starting the process as i had to try multiple times to get it to locate all the files and folders on the MBP. Thanks for the help.

Welcome to Apple Support Communities
Leave it for some minutes to see if the migration process continues. If not, simply turn off both Macs, turn them on and transfer the files again.
If the migration gets stuck again, consider the option of making a Time Machine backup of your old MacBook Pro onto an external drive, and then use that backup to restore your files to the iMac. The steps to restore a backup from an external drive are the same.

Migrating from old MBP to new

I've just purchased a new MBP 17" i7 to replace my 2008 MBP 15". When I got my 2008 version, I just used the Firewire 800 to move all of my stuff from my iMac to my MBP. Spent a few minutes fixing some passwords, and that was that. Probably took around an hour.
So, I haven't migrated between Macs for a couple of years, and I want to find out what the best way to proceed. I use Time Machine to back up my computer, and have all of my iTunes media files on a portable 1TB hard drive (I've got thousands of songs in Apple Lossless). So here are my questions:
1. Should I migrate from my old to new via Firewire? Or is it best to restore from Time Machine?
2. Will Time Machine "start over." Will I lose 2 years of incremental backups? It's nice to know I can go digging back a couple of years to find that file I shouldn't have erased. Also, every once in a while a piece of music gets corrupted, and I've got to get it replaced by an older saved version.
3. This might not be the right place, but will I be able to point iTunes on the new MBP to my media files? I'm convinced I can, but I'm not sure.
I'm going to wait a few days to do the migration, because I want to do this right. A few years ago, I did it wrong and lost years of photos, of which 90% were lost forever.

OrangeMarlin wrote:
So, I haven't migrated between Macs for a couple of years, and I want to find out what the best way to proceed.
+Setup Assistant+ has been greatly improved for Snow Leopard. See #19 in Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum).
1. Should I migrate from my old to new via Firewire? Or is it best to restore from Time Machine?
Makes little difference. It's a bit easier from Time Machine, since you don't have to start up the old Mac in Target Disk mode and make the connection, but otherwise it makes no difference (assuming you didn't exclude anything important from Time Machine).
2. Will Time Machine "start over."
As William says, yes.
Will I lose 2 years of incremental backups?
Depends on how much space is on your Time Machine drive.
It's nice to know I can go digging back a couple of years to find that file I shouldn't have erased. Also, every once in a while a piece of music gets corrupted, and I've got to get it replaced by an older saved version.
Yup, absolutely. If you keep the old drive "on the shelf" you can always display and restore from it via the +*Browse ...+ option, per #17 in the FAQ.
Or, if you get a new, larger drive, you can copy the existing backups to it, and continue backing-up to the same set of backups. See #18 in the FAQ. If you do that, when the first backup of the new Mac starts, you'll get the prompt in #B5 of Time Machine - Troubleshooting (or use the link in *User Tips* at the top of this forum).
3. This might not be the right place, but will I be able to point iTunes on the new MBP to my media files? I'm convinced I can, but I'm not sure.
Yup. Just hold down the Option key while starting iTunes; you get a prompt to Create a library or Choose an existing one.
I'm going to wait a few days to do the migration, because I want to do this right. A few years ago, I did it wrong and lost years of photos, of which 90% were lost forever.
I'd recommend against that. +Setup Assistant+ runs immediately when you first boot the new Mac up; if you take all the defaults, it will move everything from the old Mac (or backups) except OSX. No temporary user profile, no setting-up communications, etc.
If you're nervous about losing things, and don't have secondary backups, do your final Time Machine backup of the old Mac, and turn it off. Use the backups to transfer your data, so the old Mac won't be involved at all.

After migration from MBP to MBA I can no longer add to my iTunes library

I just did what appeared to be a flawless migration from MacBook Pro to MacBook Air. All except for iTunes. I've searched here this site for a solution, tried various fixes, and nothing seems to work so far. Here's what happens:
iTunes works in all respects. All my files are still there, I can still sync to my iPhone, all of that. But if I do anything that requires writing music to the iTunes folders/database (such as adding an MP3 to the library or consolidating the library), I get an error "Attempting to copy to the disk "Macintosh HD" failed. You do not have enough privileges for this operation". I have tried changing the permissions for all of the iTunes music folders, including finally giving read/write access to "everyone". However, this error message refuses to go away.
Does anyone have any ideas how I can fix this?!
Many thanks,
Howard

On the right of the To: field you will see a circled plus sign:
Click it.

Is there a way to identify which files haven't been migrated from a backup?

I've just upgraded my girlfriends 13" mbp from Leopard to Snow Leopard. It was behaving a little strangely and being sluggish so I erased everything before the upgrade. I've used Migration Assistant to transfer most files from a Time Machine backup but was a bit unsure about transferring everything blindly as I'm a little worried about what was causing the problems before the upgrade. The only items I didn't select in Migration Assistant were the 'All other files and folders' in the 'Users' drop box, and the 'All other files and folders on Macintosh HD'. I left these as I wanted to investigate what exactly these files were but now I have no clue how to go about this. Is there a quick way to highlight which files were present in the backup before the upgrade that aren't there now? Are any of these files likely to be hugely important?
Also, because I backed up again after the upgrade, Migration Assistant automatically selects the last backup to migrate from instead of the one that has the missing files. Is there a way to select which backup file to use from my external drive?
Thanks

Macademia82 wrote:
I've just upgraded my girlfriends 13" mbp from Leopard to Snow Leopard. It was behaving a little strangely and being sluggish so I erased everything before the upgrade.
It's usually not a good idea to upgrade a computer that's having problems. They may get fixed, but more often they'll get worse.
'All other files and folders on Macintosh HD'.
Those are other files, not in any user home folders, besides system files. On most installations, they're just a few Help files, but if you've installed things or created files at the top level of a drive, they weren't migrated.
Also, because I backed up again after the upgrade, Migration Assistant automatically selects the last backup to migrate from instead of the one that has the missing files. Is there a way to select which backup file to use from my external drive?
No, unfortunately. You can only do that with a full system restore.
If you used +Setup Assistant+ when the Mac first started up, the user accounts now on the Mac are the same ones, and you can use the "Star Wars" display to restore selected items from older backups. But you can't restore an entire home folder, or the default folders in the user's home folder (Desktop, Documents, etc.); you have to select the contents of those folders instead. See #15 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).
If you used the +Migration Assistant+ app, however, the user accounts may not be recognized as being the same ones, so may not have permission to see and restore from the backups.
It's a pain, but your best bet may be to start over: do a full system restore of the last Leopard backup, per #14 in the FAQ. Then try to address the "strangely and being sluggish" issue. Once that's either fixed or you determine it isn't a big problem, just install Snow Leopard over Leopard without erasing.

Migration from PC to Mac without losing application data (savegames etc.)

Hello everyone,
I am migrating from from my old Windows PC onto a MacBook Pro, and I'm having difficulties with iTunes and my iOS devices (iPhone 4, iPad 1). Maybe someone here can help me out, I'd be ever so grateful.
I set up iTunes on my MBP yesterday and logged in to my account. I replaced the empty iTunes Media folder with my old one (which contains all my music, videos and applications) via an external hard drive.
First problem: it wouldn't import these files into my new library automatically. Just showed me an empty library I think I imported the entire iTunes Media folder manually yesterday via "Add to folder". The status right now (after some experimentation) is old iTunes Media folder copied, but nothing imported (that is, I have an empty library).
When I connected my iPhone and tried to synch, I first had to authorize the MacBook for the iPhone. So far, so good. However when I tried to synch iTunes warned me that if I synch, all data on the iPhone will be removed and replaced by the data from my new local library (which is, of couse a copy of my old library, but doesn't store application data like savegames).
I tried to do it via "transfer purchased items from iPhone", which took forever, but yielded the same result: a warning that all data on the iPhone would be erased.
So the question is: How do I connect my iPhone and iPad to iTunes on my new Mac without losing application data like settings and savegames? And why is this so complicated and intransparent? I should be able to just copy my media, say "authorize this Computer, then add iPhone to the registered devices" and then proceed like nothing ever changed.
I searched the net until three in the morning yesterday, but couldn't find anything that sounded safe enough to give it a try.
Thanks in advance and best Regards,
Nate
PS: I do have the backup-folders from my old PC on a USB stick - are those going to help?
Message was edited by: Nathan1980 (Correction)
Message was edited by: Nathan1980

I was fighting this battle the past few days myself; but actually it is REALLY easy now. See here:
http://www.macworld.com/article/146958/2010/03/moveitunes_windowsmac.html
Then, once iTunes was on the Mac, I did this:
1. On the Mac rename ...\iTunes\iTunes Library.itl as ...\iTunes\iTunes Library
2. On the Mac delete ...\iTunes\iTunes Library Genius.itdb (Apparently the PC & Mac versions are not compatible - iTunes will just rebuild it later)
3. Launch iTunes and immediately press & hold down the Option key until a dialog opens asking you to Choose a library. Navigate to the folder/drive you've copied from the PC and open ...\iTunes\iTunes Library.
(thanks to turingtest2 for the above steps)
That was it. Did it yesterday evening. All playlists, libraries, everything copied fine. No problems; no broken links. Perfect.

Migration from MDD 10.2.8 to MBP on SL

Similar Messages

Maybe you are looking for