Migration from PowerPC 10.5.8 to iMac lion using wifi hangs! How to fix?

It has been showing 10 hours and 40 minutes for the last couple of hours. What to do? How to restart the process? The brand new out of the box iMac does not have a back button! Help!

The problem is you are using a wireless connection, this type of connections is too slow to use for a migration. Your migration using this method could take about a week and no I'm not kidding! I would recommend starting over this time using a cable like this one. This time use Pondini's Lion Setup Assistant tips to guide you, begin reading at second chance.
You can find the cable at any computer store, Best Buy, Radio Shack etc...

Similar Messages

Migration from PPC 10.4.11 to iMac 10.6.2 OS 9 files

I am about to use migration assistant to move my old PPC files and apps to a new 27" iMac running 10.6.2. I'd like to do everything, files and apps and settings and I plan on using a firewire cable and target mode.
The old computer is 10 years old...still running great! But when it was new it ran OS 9 and there is a lot of that old stuff still on the computer (OS 9 system, various arcane apps like Conflict Catcher--remember that one?!). Do I need to try to clean those out before I migrate, or will 10.6.2 be smart enough to deal with this?
Thanks!
PS, what an amazing thing this 27 inch iMac is!!

Most likely you do not want your old PPC-only applications. They should be updated to universal binary versions first, if possible, or find replacements that are universal binaries.
With such a mixed up old system I would be quite careful about migrating anything other than your personal data, files, and folders. Quite a lot of old stuff just isn't compatible any longer and can raise havoc on a new and well functioning system. See the following:
A Basic Guide for Migrating to Intel-Macs
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking
will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Target Disk Mode.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- Migration Tips and Tricks;
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/ (copy the whole folder)
/Home /Library/Calendars (copy the whole folder)
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.
Revised 1/6/2009

Migration from G4 Powerbook(partitioned) to new IMAC

I am tried to use Migration today, from G4 Titanium DVI Powerbook(partitioned) #1 MacTiger 10.4.11- 14GB, #2 OSX 9.9GB, #3 OS9 4GB to my new IMAC that I have had for a couple of weeks. When I had to enter the name info, it kept on telling me that I had to change the names as they were already existing. Began migration and it ran for 3 hours or more then stopped with 2 hours 58 minutes remaining on the clock. I let it go for over another hour. Nothing happening. Tried to cancel but 3 new icons were on my IMAC desktop. Rainbow wheel goes round and round etc. on IMAC. I then held down the power button on the G4 to power off. The 3 new icons on my IMAC desktop, I dragged them to the trash. I'm all in a sweat just writing this down. Who would like to hold my hand as I walk through the valley of the shadow........
Thanks for your reading, responding, succeeding. You guys always come through. Are PC people this fortunate?

I'm not sure what you are asking. Yes you can change the name of a user account, but it's a bit complicated. It would be easier to simply transfer the files as I've outlined rather than trying to use Migration Assistant which will attempt to transfer everything in the user account, which is ill-advised. There are PPC components in your old system that you do not want moved to the new computer. PPC components can gum up the works on an Intel system.
Migration Assistant is an excellent tool but it's not the right tool when you are migrating from a PPC Mac to an Intel one. See the following:
A Basic Guide for Migrating to Intel-Macs
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode or copying the critical contents to CD and DVD or an external hard drive will work better when moving from PowerPC to Intel Macs.
Basically the instructions you should follow are:
1. Backup your data first. This is vitally important in case you make a mistake or there's some other problem.
2. Connect a Firewire cable between your old Mac and your new Intel Mac.
3. Startup your old Mac in Target Disk Mode.
4. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
4. Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/ (copy the whole folder)
/Home /Library/Calendars (copy the whole folder)
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.
Revised 3/12/2008

HT4889 Trying to migrate from Mac-mini Tiger to Mac-mini Lion and Migration Assistant cannot find my Firewire, 400 to 800, "T" disk although it show up in the new Mac's computer folder. Help

Trying to migrate from Mac-mini Tiger to Mac-mini Lion and Migration Assistant cannot find my Firewire, 400 to 800, "T" disk although it shows up in the new Mac's computer folder. It seems that Mac-mini Tiger is as it should be and the firewire cable is OK. Something about the Migration Assistant is being missed, but I have no idea what it is.
Help

Addendum: I read on a post here (http://forums.macrumors.com/showthread.php?t=420169) about removing some kext files in order to trick OSX into thinking that there were no FireWire ports.
I followed the instructions and removed from /System/Library/Extensions/ the following files:
IOFireWireSerialBusProtocolTransport.kext
IOFireWireAVC.kext
IOFireWireFamily.kext
IOFireWireIP.kext
IOFireWireSBP2.kext
I restarted and BAM...Snow Leopard booted crazy fast and the mouse and keyboard worked instantly.
The System Profiler says "No FireWire ports were found."
So this tells me that the FW port is probably the culprit and is messing up the installation.
So how do I hack the Mountain Lion installer and tell it to ignore the FW port, which is obviously quite dead? Or is there something I can do to the Base system that is similar?

Can I migrate from mavericks to mavericks server. Have tried using a hard drive but the but the sever does not find the migration backup when it's searches. Any help out there?

Can I migrate from mavericks to mavericks server. Have tried using a hard drive but the but the sever does not find the migration backup when it's searches. Any help out there?

Is the HDD in the 2009 15" MBP dead? (The original source of your data) If not, you might want ot take it out and put it in an enclosure.
You might try spotlight on know files to see if that gives you any clues where your data is located.
You might down load from the Internet OmniDiskSweeper (free) and open it. It should show you all of the files you have on your MBP and enable to locate them.
Ciao.

Migrate from Exchange Server 2011 to Mac OSX Lion Mail Server

Hi all,
I'm looking to migrate from Exchange Server 2011 to Mac OSX Lion Mail Server. I work for a company with roughly 30 employees and they use exchange for mail, contacts and calendars. We want to take full advantage of OSX Server and to completly get off of exchange.
What are the best ways to do this? Are there any tools available to help this process?

I agree with the points made by Strontium90. If you have any PCs then Apple's mail/contacts/calendar software is a poor choice. Kerio Connect as a mail/contacts/calendar server would not only support Macs but would also do a good job supporting PCs running Outlook.
If you are going to become a pure Apple site, then you could use just the Apple software and this would be cheaper than using Kerio. For 30 users this might be a suitable solution, however even in a pure Apple environment many people prefer Kerio. For example I find Kerio much more pleasent when dealing with email addresses across multiple domains, email aliases, email group addresses, and so on. Kerio also has built-in email archiving, that is keeping a record of all emails. Kerio also provides a web-browser client for accessing email, calendar and contacts. It is worth noting that as standard Mountain Lion Server no longer includes a webmail feature. While I personally find the Kerio webclient rather ugly it does work.
There are some annoyances I have with Kerio, firstly they have always charged a 'maintenance' fee for their software. This provided access to software updates, and in the past also provided access to Kerio technical support. Unfortunately they now only let you make two (2) support cases per year for that cost, and you now have to pay extra for any more cases. Also while they added support for EWS (Exchange Web Service) to allow using Outlook 2011 for Mac as a supported email client, they did a poor job of this so that it does not work properly with any other EWS compatible client. This means it will not work in EWS mode with Apple Mail, nor with Outlook for Windows. While there are other ways to connect these other clients, this seems a foolish move and there have been plenty of requests to fix this.
Apple's Mail client uses EWS to connect to a 'real' MS Exhange server.

May I can upgrade from snow leo to yosemite on imac 5 using osx 10.6.8

may I can upgrade from snow leo to yosemite on imac 5 using osx 10.6.8

No. An iMac5,1 can't be upgraded past Lion 10.7.5.
(124793)

My mac keeps freezing when i try and print anything from preview. any ideas as to what the issue is or how to fix it?

my mac keeps freezing when i try and print anything from preview. any ideas as to what the issue is or how to fix it?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

TS1398 How can I use both, Windows PC and iMac, when using WiFi?. It is either-or. What can I do?

How can I use both, Windows PC and iMac, when using WiFi?. It is either-or. What can I do?

What does this have to do with using an iPad?
But yes, you should be able to connect to your home WiFi network with multiple computers and devices. In my house my wife, my daughter and I will all be using the WiFi Internet connection at the same time with our Laptops and I will also be using my iPad, my daughter uses her iPhone, and we have no issues at all.
Is this what you want to know about?

Autofill has stopped working on my iMac and Macbook Air. How to fix it?

Autofill has stopped working on my iMac and Macbook Air. How to fix it?

Hello esenglish,
Thanks for using Apple Support Communities.
For more information, take a look at:
Safari 6 (OS X Mountain Lion): If AutoFill won’t work
http://support.apple.com/kb/PH11895
Have a nice day,
Mario

Migration from PowerPC G5 OS X 10.4

Here is the situation.
I have a PowerPC G5 OS X 10.4. The G5 has two harddrive. HD1 has all the applications. The user account is on a secondary harddrive (i.e. HD2). I want to migrate the user account to iMac (Intel 10.6).
If I chose migrate from another Mac. iMac thinks the user account has 0 Kb, since all the files are on the HD2. If I chose imgrate from another disk, iMac can not find the HD2 even thought HD2 is connected through Firewire and showed up on iMac desktop.
I copied all the account info manually. Because of the difference between 10.4 and 10.6, and Intel vs. PowerPC, all my application messed up.
Is there other way I can migrate?
Thanks,
ttk

Hello
try use an ethernet cable , migrate by network option should work better in your case
Pierre

Migrating from an eMac to my new iMac

Hello,
I need to migrate all of my info from my eMac to my new iMac.
How is this done between the computers? Do I use a USB cable?
What steps do I need to take?
Thanks

Cat-5 is just a speed rating for the Ethernet cable (higher number means faster). If you look closely at the cable, the rating is usually printed along its length. Cat-5 will give you at least 100 mbps. Cat-5e or Cat-6 will allow gigabit (1000 mbps) speed. The recent Macs all have gigabit Ethernet ports. Your eMac probably has 100Base-T (100 mbps) Ethernet, which is sill pretty fast for networking.
Can I use the ethernet cable from that connects my cable modem to my iMac?
Yes. You can use any old cable, and it will work as long as the cable is not broken. The speed rating of the cable may limit the file transfer speed.
If you use Ethernet, you are making the connection using +File Sharing+ over the network.
If you wait and use that FireWire adapter, you can use +File Sharing+, but it would be better to start the eMac using FireWire Target Disk Mode (as mentioned earlier), and mount the eMac's hard drive directly to the iMac's desktop. The eMac's hard drive will appear to be an external FireWire drive.

Migration from PPC G4Powerbook to Leopard Intel Imac

I am trying to use the Migration Assistant to transfer from G4ppc Tiger to Intel Leopard Imac running 10.5.8. All goes well until the 'Restart your old Mac' screen. When I do this and have the Firewire sign on screen on my ppc G4 powerbook, the 'Continue' button remains greyed out on my imac, and the Imac remains 'waiting for your old mac to restart'.... Is the migration profile I am attempting not possible: from ppc Tiger to Intel Leopard over Firewire?
Thanks in anticipation,

Possible, because it has worked for some, but not recommended, because it has failed for many. Instead, follow these directions:
http://discussions.apple.com/thread.jspa?threadID=435350&tstart=0

Migration from powerbook 10.4.11 to imac 10.6.8

Migrating from Powerbook G4 10.4.11 (cannot upgrade beyond this release). Migrating to a new iMac 10.6.8. Problem: both computers are on the same wireless network. Start Migration Assistant on iMac then on Powerbook. Select "From another Mac" on iMac and "To another Mac" on Powerbook. Powerbook sees iMac, offers passcode entry field. Enter Passcode from iMac into Powerbook Passcode field. iMac displays "processing information ...". Powerbook does same. After 10seconds Powerbook displays the Passcode entry field again. Enter the same Passcode from the iMac into the Powerbook Passcode entry field. Powerbook displays "searching for other computers ...". iMac displays "processing information ...". After a few minutes, iMac displays dropdown box stating "connection to other Mac failed" (or similar wording) while Powerbook continues "searching for other computers ..." and iMac Migration Assistant main dialog box continues "processing information ...".
Any help solving this problem will be much appreciated.
Steve

Steve your first mistake is attempting to do this wirelessly. If you can get it to start expect the migration to take a week or more. The easiest way is to connect the two together via Firewire with a cable like this which you can find at your local computer store, Radio Shack or of course Amazon. This assumes the Powerbook has Firewire, if it doesn't then create a bootable clone on an external HD. You will use either SuperDuper or Carbon Copy Cloner to create the bootable clone. Then instead of using Migration Assistant use Setup Assistant which you ignored when you turned on the new iMac for the first time, this mean you will need to start over. Please read Setup Assistant tips for detailed instructions beginning at "Second Chance..."
Finally when you are migrating I would strongly recommend not migrating your Applications because you are moving from a PPC based machine to Intel. You may have apps that don't run on Intel or simply need to be updated to do so. This is your opportunity to update Apps and get current.
Migration Assistant and Setup Assistant are cousins, similar but different. First is SA is more reliable and second it does not create a second user account.

Migration from external hd with Leopard to iMac Intel

hi,
I make two clone of my old iMac G5 internal HD (10.3.9), to an external HD with two partition
and update one partition to leopard, buyed just for testing all the application CS2 p. and studio 8, all run well!
Now, i suppose i can use Migration Assistence chosing the external HD, (the one with Leopard and software tested) to import to the new iMac Intel*, what i weiting for, (*just come with Leopard installed),
without problems or is better a fresh install of CS2 p. and Studio 8, on the Intel unit?
Thanks for any suggestion
AleX

Hi Allan Eckert,
thanks in advice.
I buyed CS3 p., so i don't want migrate CS2 and Studio 8 on the Intel unit, but only the user.
I precise, when i updated one of the two partition of the external HDwd
i have made TimeMachine on USB external disk, i migrate from here?
Can you tell me if befoure begin i use the new iMac intel
must create a new Admin name what must be different from the Admin name
and user what i must import ?
Thanks again
AleX

Migration from PowerPC 10.5.8 to iMac lion using wifi hangs! How to fix?

Similar Messages

Maybe you are looking for