Migration from SYBASE IQ to SYBASE ASE 11/12 and then to ORACLE 10G
Hi ,
The OWMB tool does not support migration of SYBASE IQ to ORACLE.So there should be some tool to migrate this SYBASE IQ to SYBASE ASE 11/12.And then which we can migrate to ORACLE which the OMWB supports.Does anybody have any idea about such tool(SYBASE IQ to SYBASE ASE 11/12).
Thanks With Regards,
Vinoth
Vinoth,
That's correct. However Sybase IQ is normally associated with Data Warehouses. Have you investigated the suitability of using Oracle Warehouse builder to assist with such a migration?
Ispirer supports migration from Sybase IQ 12 ( http://www.ispirer.com/products)
Donal
Similar Messages
-
Migration from Essbase 7.5.1 to system 9 and then to 11
Hi all,
I have an immediate requirement to migrate huge essbase applications from essbase 7.5.1 to system 9.
as per my knowledge, i believe that we can migrate from 7.5.1 --->9.2.0.2--->9.3.1 or EPM 11i.
Anybody who have worked on the same please confirm.
Or if there is any ohter way to do it, please let me know.
will it be possible to migrate from 7.5.1 to 9.3.1 directly? i was able to migrate very simple applications directly from 7.5.1 to 9.3.1. I am sure there will be issues when we migrate huge applications.
Hope to get a response from u guys...
regards.,
NishanthHi,
This has been covered so many times, just type Migration into the search
Here is an example of some of things returned
Re: Upgradation From 6.5 to 9.3.1
Re: Upgrading Essbase 6.5.4.2 to System 9
Re: Migrating Essbase 6.5 to 9.3.1
Re: Migration from 7.0.1 to 9.3.1
Re: Migration from version 7 to version 11
Small applications should be no different than big applications
Cheers
John
http://john-goodwin.blogspot.com/ -
Trying to migrate from Mac-mini Tiger to Mac-mini Lion and Migration Assistant cannot find my Firewire, 400 to 800, "T" disk although it shows up in the new Mac's computer folder. It seems that Mac-mini Tiger is as it should be and the firewire cable is OK. Something about the Migration Assistant is being missed, but I have no idea what it is.
HelpAddendum: I read on a post here (http://forums.macrumors.com/showthread.php?t=420169) about removing some kext files in order to trick OSX into thinking that there were no FireWire ports.
I followed the instructions and removed from /System/Library/Extensions/ the following files:
IOFireWireSerialBusProtocolTransport.kext
IOFireWireAVC.kext
IOFireWireFamily.kext
IOFireWireIP.kext
IOFireWireSBP2.kext
I restarted and BAM...Snow Leopard booted crazy fast and the mouse and keyboard worked instantly.
The System Profiler says "No FireWire ports were found."
So this tells me that the FW port is probably the culprit and is messing up the installation.
So how do I hack the Mountain Lion installer and tell it to ignore the FW port, which is obviously quite dead? Or is there something I can do to the Base system that is similar? -
I just upgraded my MAC from OSX 10.5.8 to Snow Leopard and then to Mountain Lion 10.8.2. When I try to access my Microsoft Office for MAC (2004 edition) files I am getting a message "can't open Office because Power PC applications are no longer supported. How can I access all of my save Word documents? I just want to be able to retrieve all of my documents that were in Microsoft Office for Mac (2004). If I purchase the newest version of MS office for Mac from Apple will I be able to retrieve my old documents?
Use any number of free alternatives to your nearly decade old version of MS Office.
Consider
LibreOffice (donation-supported)
NeoOffice (free)
OpenOffice (free)
In addition to the above I also recommend Apple's Pages ($19.99). I use OpenOffice and Pages and have been completely Microsoft - free for years. Life is better without Microsoft. -
How to integrate from MS SQL SERVER 2005 and Flatfile to Oracle 10g.
Hi
I am new to ODI. I am trying to load sample data from MS SQL Server 2005 and Flatfile to Oracle 10g.
1. I have created three models.
1-1. SQL2005 (SRC_CUSTOMER table)
1-2. Flatfile (SRC_AGE_GROUP.txt & SRC_SALES_PERSON.txt)
1-3. Oracle 10g (TRG_CUSTOMER table)
You may know I got those environments from the ODI DEMO environment.
2. I could able to reverse the tables also.
3. I have created an interface which contains source table (from MSSQL 2005), Flatfile and target table from ORACLE model.
4. I have imported the knowledge modules. But I am confusing in selecting the knowledge modules to source and target tables.
I've selected LKM File to SQL for flatfile model.
I've also selected LKM SQL to SQL for MSSQL 2005 model and IKM Oracle Incremental Update for the target table (ORACLE).
I've also implemented the interface that I created. It worked without errors. But there is no data in target table which is TRG_CUSTOMER.
I really would like to know what happened and what the problems are.
You can email me [email protected]
Thanks in advance
Jason Leewhat did give for SRC_AGE_GROUP SRC_CUSTOMER join condition
if it is
(SRC_CUSTOMER.AGE=SRC_AGE_GROUP.AGE_MIN) AND SRC_CUSTOMER.AGE=SRC_AGE_GROUP.AGE_MAX
give it as
(SRC_CUSTOMER.AGE>SRC_AGE_GROUP.AGE_MIN) AND SRC_CUSTOMER.AGE<SRC_AGE_GROUP.AGE_MAX -
i downloaded an update from creative suite 5.5. to 6.0 and then switched computers for a few months. now I am back using the original computer and it looks like all of those Adobe applications (both 5.5 and 6.0) have disappeared. Maybe a "trial" was uploaded instead of the actual updates? Anyway, i just want to get the applications back onto my computer. i tried to enter the serial numbers on my original packaging but systems side error message from Adobe says they were already "redeemed" (which makes sense bc I already downloaded the updates. Apparently there is no phone customer service for Creative Suite anymore. ARRGGG. Any and all suggestions welcome!
-Michelethere is no update from 5.5. to 6.0.
you could have upgraded from 5.5 to 6.0, but you would know that because you paid money.
assuming you paid no money for a 6.0 upgrade, you still have your 5.5 license. uninstall clean and reinstall 5.5 per http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Can I download my data from an iphone to another device, edit it and then upload it back to the iPhone?
I want to free up memory?IT depends on what "data" you are asking about.
if you are having storage issues on your phone, I would be happy to make suggestions.
You can store pictures and documents in Dropbox or Google drive. These are cloud storage apps that keep your information stored off the phone, but available any time. You can send pages documents to either app in a different format for editing.
make sure you delete old messages, phone logs, email, as they take up space also. -
Is there any way to download these files manually from another source? The download from boot camp keeps stopping at around 25% and then produces the error "Can't download Windows Support Software because of a network problem". Thx!
No. This issue is dicussed here frequently. The only option is to be patient and try often. Search this forum for other posts about this issue.
-
I just set up my migration from my old iMac to the new one via wifi and it says it'll take 42 hours! What's up with this?
blackeducator wrote:
... What's up with this?
Don't migrate wirelessly unless you have a very fast wireless connection. Anything other than 5 GHz 802.11n is likely to take an unacceptable amount of time. -
I still have my iPod nano 3rd generation, but my old computer crashed and I did not have itunes backed up. Is there a way to get the music from ipod to new computer library and then on to the new ipod ?
Save all the photos from your Droid into a folder on your computer.
Connect your device to your computer. On iTunes left Pane, select iPhone under 'Devices'; then on the right Pane, select PHOTO tab. Make sure Sync Photo box is checked, and "from" box selected the folder that has Droid's photos. Then click the SYNC or APPLY button on the lower right window. -
What I need help with is in the question. Kids are old enough to have separate ids. I want to ensure that I can create them and then associate their music and apps to the right accounts.
As Allan posted you cannot transfer Apps and Music to a different Apple ID. Here's what I would do...
Use separate Apple ID's for iCloud, iMessage and FaceTime. These services are separate from iTunes.
Create a new Apple ID > https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/ -- Note: You need a verified email address
On the device(s) go:
Settings > iCloud > (Scroll Down) Delete Account > Sign in with the new Apple ID -- Note: This only affects the device
Settings > Messages > Send and Received > Apple ID > Sign Out > Sign in with the new Apple ID
Settings > FaceTime > Apple ID > Sign Out > Sign in with the new Apple ID
This will separate your iCloud content (i.e. Contacts, Notes, Reminders etc.), Messages and FaceTime.
You all can continue to use the same Apple ID for iTunes and share the already purchased Apps, Music and Movies
If you decide that's not acceptable go:
Settings > iTunes and App Store > Apple ID > Sign out > Sign in with the new Apple ID -- Note: We covered the transfer of content part.
Hopefully that will put you on the right path to sort out the issue. -
The iosx and open VPN app on the iPad/phone aren't compatible w my school's VPN, but my Mac is via tunnelblick. I would really like to have VPN access from my tablet so I can access journals without undergoing a tedious process.
Has anyone encountered this and found a remedy? I'm imagining an app from the tablet that can access the Mac at home to turn on the VPN to the school and then have access.. But then I'm thinking id be reading through 2 screens then formatting/resolution could be a problem.
Another thought was setting up a VPN at home so that my iPad can connect to my computer at home via VPN which would then allow me easy access to journals. But I'm lacking experience in this, especially a security issue as I'm going from point A to point C to get back to point B.
I'm open to any suggestions.
ThanksYou should be able to use the OpenVPN Connect app running on your iPad to connect your iPad to the VPN directly. It is an official OpenVPN client for iOS devices.
In what way is it "not compatible"? Have you tried it? Tunnelblick is an OpenVPN client, so your school's VPN is using the OpenVPN protocol. That means any OpenVPN client should be able to access it. (It is possible, but unlikely, that your school uses encryption that is not available on the iPad, but that would be very unusual.)
Otherwise, a remote control app on your iPad would let you control your Mac at home. "Back to My Mac", for example, would allow you to control your Mac remotely. The tricky part of this is that usually a VPN is set up to send all Internet traffic via the VPN server, and I'm not sure how that would work with "Back to My Mac". -
Hi, I bought an iPod 2 and I jailbreaked it before. I tried to download the iOS 5.0.1 from the Settings icon on my iPad 2 but then my iPad wouldn't turn on anymore and it kept on showing a screen with an arrow pointing to an iTunes symbol. I later learned that this was the recovery screen so I tried to put it out of the recovery mode by pressing the home button and power button simultaneously, but the screen kept on returning back to the recovery screen. I could not restore the iPad 2 on iTunes either, so I downloaded Tiny Umbrella 5.10.01 and tried to save the shsh. However, under the recovering devices section on the left side, my iPad did not appear and I only got a device titled ?18092..... I tried to save the shsh of this ?18902... anyways but this did not work. So, I clicked on the device and pressed the exit recovery but then my iPad2 screen went black with a white apple logo in the middle. This logo keeps on dimming and disappearing and even when I plug my iPad 2 to the computer, neither my iTunes nor the Tiny Umbrella notice it. I need urgent help!
eddiekero wrote:
Hi, I bought an iPod 2 and I jailbreaked it before. I tried to download the iOS 5.0.1 from the Settings icon on my iPad 2 but then my iPad wouldn't turn on anymore and it kept on showing a screen with an arrow pointing to an iTunes symbol. I later learned that this was the recovery screen so I tried to put it out of the recovery mode by pressing the home button and power button simultaneously, but the screen kept on returning back to the recovery screen. I could not restore the iPad 2 on iTunes either, so I downloaded Tiny Umbrella 5.10.01 and tried to save the shsh. However, under the recovering devices section on the left side, my iPad did not appear and I only got a device titled ?18092..... I tried to save the shsh of this ?18902... anyways but this did not work. So, I clicked on the device and pressed the exit recovery but then my iPad2 screen went black with a white apple logo in the middle. This logo keeps on dimming and disappearing and even when I plug my iPad 2 to the computer, neither my iTunes nor the Tiny Umbrella notice it. I need urgent help!
At this point only a restore will fix your issue. -
Here is what happens: I get an add from Big Fish Games for a game that is from the Itunes store. It has a link and I click it. The link takes me directly to Itunes for about 2 seconds and then blanks out giving me:
Firefox can't find the file at itms://itunes.apple.com/us/app/haunted-manor-lord-of-mirrors/id414574468?mt=8&affC=QQABAAAAHgAJ4Q8iaTJoenF2SmlmX00tTGpZSXZoRHVRWjduUzlqUHBxUVdsUQ==.
What's up with this? This does not happen in the Chrome browser. The link works perfectly.Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?
-
Exp File from Oracle 8i and Imp into Oracle 10G
Dear Friends
I have two servers one using oracle 8i and the other 10G. Firstly i have exported the file from oracle 8i using exp command. Im trying to import the file into 10G , Although this takes place successfully the character set conversion takes place please see the output below
Import: Release 10.2.0.1.0 - Production on Sat Apr 30 13:00:41 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Username: cane_bill
Password:
Connected to: Oracle Database 10g Release 10.2.0.1.0 - Production
Import file: EXPDAT.DMP > C:\cbbkp_mun_06042011.DMP
Enter insert buffer size (minimum is 8192) 30720>
Export file created by EXPORT:V08.01.07 via conventional path
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
import server uses WE8ISO8859P1 character set (possible charset conversion)
export client uses WE8ISO8859P1 character set (possible charset conversion)
export server uses WE8ISO8859P1 NCHAR character set (possible ncharset conversio
n)
List contents of import file only (yes/no): no >These are the NLS_DATABASE_PARAMETERS for *8i*
SQL> SELECT * FROM NLS_DATABASE_PARAMETERS;
PARAMETER VALUE
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET WE8ISO8859P1
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_SORT BINARY
NLS_TIME_FORMAT HH.MI.SSXFF AM
PARAMETER VALUE
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZH:TZM
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZH:TZM
NLS_DUAL_CURRENCY $
NLS_COMP BINARY
NLS_NCHAR_CHARACTERSET WE8ISO8859P1
NLS_RDBMS_VERSION 8.1.7.0.0
18 rows selected.These are the NLS_DATABASE_PARAMETERS for *10G*
SQL> SELECT * FROM NLS_DATABASE_PARAMETERS;
PARAMETER VALUE
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET WE8ISO8859P1
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_SORT BINARY
NLS_TIME_FORMAT HH.MI.SSXFF AM
PARAMETER VALUE
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY $
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_RDBMS_VERSION 10.2.0.1.0
I'm not able figure out why a conversion is taking place even though the same character set is used in 10G.
I would be greatful to you guys if can suggest a way to avoid this conversion as i fear data will be affected kindly need your suggestions for the same and thank you.
Regards
Parikshitbased on your nsl parameter settings, we can see that both databases use the same characterset. so, characterset conversion should not take place. the reason why you are facing these warnings is due to environment variables.
you should set NLS_LANG environment variables both before exporting and importing. Then warnings should disappear. For example, in your case you can set NLS_LANG=.WE8ISO8859P1 (please note that I have omitted language and territory parts here)
Try setting enviroment variables and then perform export and import again.
Maybe you are looking for
-
Lightroom 5.4 backup hangs upon finish, relaunches new dialog box
Is this a bug? I have a recurring Lightroom 5.4 issue on quitting. I have it set up to backup catalog every week upon exit. When the time comes each week, the backup proceeds, but doesn't end -- it just hangs while a new, second dialog box asking to
-
for the past 2 weeks I can not sync my iphone contacts or calendar to outlook. I have spent 5 hours reading on how to fix this matter but nothing works. Can anyone help me?
-
SWF tests good, but doesn't work standalone
Simple flash movie will test fine from within Flash8, but when I double click the swf or access the swf from another site, it won't work correctly. Specifically, I want it to not scale and stay centered in the screen if user decides to open it up. I
-
Printing problem in cs5 and imac 27
I have been running my Epson Stylus Pro 4800 on a macbook pro and cs3, for a couple of years with no problems whatsoever. I have now upgraded to a new iMac 27"and have had nothing but problems with the 4800. I have made my own profils and used Epson
-
Hi, I need to pass a parameter for one lov and am trying to pass with the code: In the page that calls the Lov step (vinculo = 1) <bc4j:messageLovField name="CodPessoaAluno" attrName="CodPessoaAluno" columns="10" required="yes" message="Informe o Nom