Migration Guide from EP6 SP13 to Portal Netweaver EP 7.0 EHP1

Hi Gurus
I am working on a portal migration project EP6 SP 13 (WAS 640) to Portal Netweaver EP 7.0 EHP1 .
Here I am lokking for a migration guide or a document based on our project . I check on SMP and sdn but not able to find the suitable guide
All I got is an how to guide "How Tou2026 Migrate from SAP Enterprise Portal 6.0 SP2 to SAP NetWeaver '04"
Please guide me from where I will get relevant document.
regards
Jaswant

Hello,
Please check out http://service.sap.com/instguides --> SAP NetWeaver --> SAP NetWeaver 7.0 --> Upgrade. On the next screen, open the link "Upgrade Documentation - SAP NetWeaver 7.0 incl. EHP1" under "2 - Upgrade - SAP NetWeaver Systems".
On the next screen, follow the link "SAP NetWeaver 7.0 Including EHP1 - Java", and select the guide you need.
Kind regards, Wilbert

Similar Messages

How to migrate content from BW 3.1 to NetWeaver 7.0

Hello all out there,
For a couple of years I have been successfully using SDN, finding always the right answer to my questions, however in my late assignment things have not been running that smoothly.
This is my first posting to SDN and I hope any of you out there can give me a hand.
My Case:
We are planning to upgrade from BW 3.1 directly into NetWeaver 7.0
Our previous research within our planning phase has taking us to read:
Everything under the Marketplace NetWeaver Upgrade portal (https://websmp204.sap-ag.de/upgradenw70)
Upgrade Master Guide
Many docs in SDN
My Question:
Based on our research, we have a good understanding about the technical upgrade path and the creation of a new landscape. However anything we have read explains about how to migrate our actual Queries, ODS, Web Templates, Infocubes, Update Rules, InfoObjects, etc to the new environment.
Could you please point me to the right literature, how to guide, migration path, etc; explaining how to migration content from BW 3.1 to NetWeaver 7.0
Thanks
Alejandro

Hi,
This is more a question for the BI forums.
Anyway, have a look at
service.sap.com/upgrade-bw
BW3.0B upgrade to BI 7.0 question about BI Content 3.1
/thread/367125 [original link is broken]
/thread/150068 [original link is broken]
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2e8e5288-0b01-0010-2ea8-bcd4df5084a7
Eddy
PS. Which type of SDN Ubergeek/BPX suit are <a href="/people/eddy.declercq/blog/2007/05/14/which-type-of-sdn-ubergeekbpx-suit-are-you">you</a>?
Deadline: June 15th

How to migrate UWL from EP6 to EP7

Hello,
We want to migrate UWL from EP6 to EP7. Is enough task to transport the customize XML file that is located in UWL?
Is it necessary to upload to EP7 the rest of attached documents? How?
Thanks,
Marta.

Just install the same way you did originally. Download/install the desktop application, sign in, install the subscription application(s). You are allowed to have two working installations so you can keep the original intact if you like. If you prefer not to then you should sign out of the old installation as a minimum.
Creative Cloud for desktop
https://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
Sign out, Sign in | Creative Cloud desktop app
http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
Activation & deactivation help
https://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html#a ctivate-how-to
Install, update, or uninstall apps
http://helpx.adobe.com/creative-cloud/help/install-apps.html
Installing Creative Cloud Apps
http://tv.adobe.com/watch/cs6-creative-cloud-feature-tour-for-video/installing-desktop-app s-from-creative-cloud/

Migration guide from Iplanet application server

Hi ,
i would like to migrate application to oracle 9ias application server.Curently we are using iplanet application server6.5.
From where do i get some useful documents.
In oracle 9ias faqs , its written that its available on http://ias.us.oracle.com.But the site is not opening up.
If some one has already tried migration please suggest to us as how to do.
Thanks in advance
smita

Please refer to the following url:
http://www.sun.com/migration/sunonetools.html
This should give u a head start on what needs to be done and how,. WIth respect to webserver , i guess you can use it or leave it depending on the architecture you require to deploy your solution.
Hope this helps !

Issue after migrate workbook from 3.1 to BI Netweaver 7.0

Hy experts,
We have a workbook in v.3.1 with several querys in only one sheet, one below the other.
When we migrate this workbook to 7.0 and refresh it, the system shows this message:
"Some item(s) overlap with each other".
Then an unassigned navigation pane (no characteristic is asiggned to it), corresponding to the first query, is put on the analysis Grid, corresponding to the second query, so some rows are not visible.
How can we do to avoid that unassigned navigation pane?
Regards.

Hi,
Issue may be due to the Excle formulae used in the workbook which do not get migrated.
One way around it is to migrated the queries first and apply Excel validations on top of it in 7.0
Hope this helps.
Thx,
SK

Export/import content from EP6 into NW04

We are upgrading from SRM3.0/EP6 SP2 (source) to SRM5.0/Portal NW2004s (target).
The only thing we need to preserve from the source portal are the users and roles. We plan to re-apply the business package for SRM 5.0 after the migration is completed. We are not using any Collaboration Rooms.
I know there is a migration path from EP6 SP2->EP6 SP9(NW04), followed by an upgrade from NW04->NW04s.
My question is:
- is it possible to export content from EP6SP2 and import it into NW04/MW04s? this will eliminate the complicated migration path from EP6 SP2 to NW04.

Hi,
As long as you only need to transport PCD content, I would recommend using normal PCD transport (just did an upgrade from EP6 SP2 to NW04 SP13 and used normal PCD transport without any problems. Will do the same for another upgrade to NW04s). Only if you have KM content you are forced to use the migration tools.
I am not quite sure about users and role migration since I've only use LDAP as a user store (we manually repeated the AD group to portal role mapping since there were very few)
There was a conf call on this, but the only reference I can find now is https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/supplemental_docs/prtl204.pdf
Dagfinn

Reasons Adobe should write a migration manual from FH to AI

what my friend wrote me...
About FHMX, how about educating people why Freehand is so
much better than
ill, and publishing a migration guide from ill to Freehand.
Maybe you and I
can join Adobe and implement this program! As a matter of
fact I've already
written the introduction to the guide.
Top reasons why I love using Freehand MX over Illustrator for
the work we
do. Try it, and you'll like it too.
•Gouping and ungrouping is time consuming in ill. If an
object on the bottom
is grouped, the whole group is selected. Selecting the bottom
object is
useless unless you ungroup all. Very time consuming.
Freehand can select one element even if it's part of a group.
• It is common in ill & FHMX to hold down shift
while clicking on objects to
select several at a time. ill has a tendency to 'pick up'
& move those
objects as your moving from one to the other. Which means
having to back up
your last step and then continue.
•• ill select/same/stroke colour, fill colour
etc. VS FHMX 'find & replace'
In ill available only 'document wide' which forces you to
take the selection
and place it in a new document (usually a temporary measure
ill forces upon
you).
All this copying takes extra time when the art is complex.
Since changing colours is often the goal, opening a new
document means
having to drag into the new doc, all the colours you'll be
needing to
change.
Also when choosing same fill & stroke colour, ill doesn't
catch everything,
so you have to try several times to get everything.
FHMXs 'find & replace' runs on whatever you select,
without requiring
copying
the info to a new document, so there is no waiting like in
ill. And it
catches everything all in one shot. Wham, bam thank you maam.
FHMXs 'find &
replace' light years ahead of ill.
• Multiple page documents
FHMX multi page documents can be of different sizes and
orientation within a
single document. Ill must have the same size and orientation.
Ill allows only one page size & page format while FHMX
permits you to use
any combo within the same document, all with the click of a
button. Job's
done.
ill: go into doc setup and calculate new overall width.
"let's see I need 5 pages of 8.5x11 so that's 8.5" x 5 pages
=42.5" width.
If you add a page, all the doc info gets shifted off center.
Ill requires
you to select all, (make sure nothing is locked!) and
recenter all the
pages. All time consuming and unnecessary in FHMX.
Ill can't handle multiple pages when it come time to print
them all. In
order to be able to print an 8 page document with simple
vector art (without
any linked files) in illustrator, it was necessary to convert
the document
to 8 single page documents. Each page took 5 minutes , 40 min
total.
FHMX prints multiple page documents with no hesitation.
••ill has no collect for output. This is
ridiculous. FHMX enables you to
enjoy creating freely without having to think of where that
tiff you just
imported came from. When the art is finished in FH, click
'collect for
output' and in under 5 seconds a complete folder is created
of everything
you need to backup that artwork.
Never spend one second looking for anything again when
opening a freehand
document. Not today, not tomorrow, or in three months.
In ill, after the art is done, you need to spend the time
looking for those
linked files, to gather them into a folder. And when a
deadline is so
important, will you actually take the time? NO! So days,
weeks, or months
later, when you need to open the file and the tiff is
missing, well, I hope
you like treasure hunts, because with time tiffs can be moved
or go missing.
With this one feature, FH saves hours of time per year over
ill.
•Pathfinder/combine in ill is slow ad often crashes the
program. (See next
point) Freehand unite is Fast!. ill requires you to ungroup
all elements
before using the filter. FHMX doesn't.
••Paste inside.
FHMX enables you to use garment sketches without modifying
shapes to
accommodate a tiff pasted inside. Tons less work over ill.
'Paste inside' in
FHMX is fast & effortless, encouraging you to paste
inside each individual
shape of the garment. (Ex. Belt loops, waistband, pockets,
body. All get
their own tiff pasted inside.) This gives the artist freedom
over each
individual tiff. Changes can be applied in light/dark or
angle to each tiff
seperatly from one another.
Ill cannot do this without a massive investment in time, it
doesn't even
compare with the ease of FHMX. ill method is also a pain to
work with ,
requiring you to lock/unlock items as the masks bounding box
is often in the
way. This requires you to lock nearby elements in order
select. Very
annoying. This work around is so time consuming it
discourages you to paste
inside individual shapes. In fact it's impractical to do so.
You're forced
to combine all shapes and paste one tiff into this one
overall shape, which
is time consuming because it increase your workload to
achieve a lesser
result.
Ill requires you to draw a duplicate shape which must lie in
perfect
register with the shape underneath it. Shapes are often
composed of highly
complex components (ex:text) that need to be united into one
overall shape,
to paste into. Often these complex shapes crash illustrators
unite filter,
making the job time consuming or impossible. FHMX requires
none of this
workaround, because FHMX enables you to past into individual
shapes.
FHMX can even paste inside a paste inside, and in easily
accesible layers,
creating realistic effects. Don't even dream of doing this in
ill.
•ill toolbox. The 'Venus' girl at the top of the box is
often clicked in
error resulting in an annoying 'Adobe online' dialogue box
appearing. So
annoying! Bury this feature elsewhere, or at least move it
away from the two
arrow tools, the two most used tools of the whole program!
Stop interrupting
workflow!
•Ill locking unlocking frenzy
You'd like to add a point to a path. In FHMX, select the path
and click on
it
with the pen tool. You're done.
In ill, select the path and click on it with the pen tool +.
But ill adds
the point to the path in front, even though you selected the
one in back!
Ill forces you to lock the front path to get to the rear
path. If your
artwork has many layered paths, get ready to go on the usual
locking frenzy
until you get to the path you need. All this just to add a
point.
As an added bonus, ill often throws the "Can't add an anchor
point. Please
use the add anchor point tool on a segment of a path"
dialogue box in your
face, as if you can't aim a point on a path.
Paste inside
• Because paste inside in ill is so complicated, a
common workaround is to
create a pattern swatch to achieve the same ease as in FHMX.
However pattern
swatches are simple vector paths that can't match the
subtlety of a tiff.
When opening a new document, swatches have to be brought in
to the new
document to be used.. When changing a pattern colour, a new
swatch has to be
created, which is more time consuming than changing the tiff
colour in FHMX.
5 seconds vs. 5 minutes
• The arrow+ tool in Ill selects in increments of one
group at a time. FHMX
selects in increments of one element at a time, giving the
user greater
control over elements within groups.
• In Ill before using Pathfinder/Unite, you should
save, because pathfinder
tool often crashes the program. Since large documents take
time to save,
waiting time in Ill multiplies. FHMX doesn't crash when using
the pathfinder
tool so much time and frustration is saved.
Sometimes Pathfinder in Ill just won't work the way it's
expected to. I wind
up importing the art into FHMX where it works fine and
instantly.

I think what Morty said needs to be reminded here:
quote:
quote:
Should we read anything into Adobe putting out the Freehand
to
Illustrator migration guide you posted about?
No, that's something that Adobe has planned for quite some
time. I hinted to its release several months back when we were all
discussing how Adobe should produce such a document. This "rumor"
that I refer to is something that surprised me as well. I have yet
to confirm it though...
Mordy
Since Adobe was planning this for some time, let's not jump
to conclusions. Mordy did confirm to us that there is indeed a
Product Manager for FreeHand. Also, it's interesting to note that
Adobe has a different situation on their hands than they did with
Pagemaker. What we have is two competing (?) programs, FH and Illy,
they are both truly loved by their devoted users. Adobe probably
realizes that they gave to keep both because the users of either
program have been devoted for years. Neither Illy or FH users would
be happy about migrating. Adobe I'm sure will keep both programs
(at least I'm hoping they are smart enough to). When Adobe migrated
Pagemaker users to InDesign, InDesign was a new tool. Illy is old
like FH...you ca't force a migration to a tool that is just as old
as the one your migrating from.

How to migrate projects from CS3 to CS4? (Version Cue)

First of all, I tried to follow the steps here by 'Markus_Jasker' http://forums.adobe.com/thread/313661?tstart=30.
We are primarily a windows shop, with a small group of Mac artists. We have an Xserve with Version Cue 3.
All the artists use CS3. One of the artists upgraded to CS4. The user primarily cares about his InDesign files.
We were unsure whether the CS3 people could see the Version Cue 4 server on the Xserve, so we grabbed an extra
G5 lying around (Mac OS X Version 10.4.11) and installed Version Cue 4 on it.
Even though I turned off both VC Servers, and copied the 'com.adobe.versioncue.migration_3.1.2' folder from Version Cue 4
to Version Cue 3 and restarted both servers, I still get the message "unable to connect to Version Cue CS3 Server etc etc."
The Xserve is on 10.5.1.x and the G5 is 10.5.2.x with a 255.255.252.0 mask.
I am primarily a windows admin, so I need some help!
HappyTech

Hi,
It has been a while since I have had access to sun one studio 5. If I remember correctly, it was based on Netbeans 3.5.1. It turns out the Sun Java Studio Enterprise 7 release was based on Netbeans 3.6. Both of these Netbeans versions used mounted filesystems rather than the new project system. There is a migration guide from JSE 7 to JSE 8 available:
http://developers.sun.com/prodtech/javatools/jsenterprise/reference/techart/jse8/intro_migration_jse8.html
I think this migration guide will apply to your situation as well.
Let me know if this helps.
Thanks,
George

How to migrate projects from sun one studio 5

hi,
can anybody tell me how to migrate existing projects from sun one studio 5 to sun java studio 8 projects?
regards
guenther

Hi,
It has been a while since I have had access to sun one studio 5. If I remember correctly, it was based on Netbeans 3.5.1. It turns out the Sun Java Studio Enterprise 7 release was based on Netbeans 3.6. Both of these Netbeans versions used mounted filesystems rather than the new project system. There is a migration guide from JSE 7 to JSE 8 available:
http://developers.sun.com/prodtech/javatools/jsenterprise/reference/techart/jse8/intro_migration_jse8.html
I think this migration guide will apply to your situation as well.
Let me know if this helps.
Thanks,
George

Upgrade from EP6.0SP2 to Netweaver 04

Hi,
Currently we have EP6.0Sp2 Patch3 installed and running. Recently we have got Netweaver 04. Kindly let me know what is the procedure for upgrading from EP6.0SP2 to Netwearver 04. DO we need to build a new system? or can old system be upgraded.
Thanks,
Maya.

Hi Maya,
in addtion To Dagfinn, some details:
- The migration tools are planned for Q1/2005. See /thread/25021 [original link is broken] where it is said they are planned for 2005-02-16, but I don't know how official this is.
- For WAS migration, there is a forum, with one thread at the moment, saying "J2EE Migration Kit available!!!", with one answer ("Where?"), with no reply... See SAP NetWeaver Application Server
- Anyhow, there are different SAP notes concerning migration issues, in detail:
Note 804876 for a KMC issue
Note 778977 for a PCD issue
And last but not least: The "EP 6 SP2 Migration to NW04 (EP6 SR1) Troubleshooting Guide": http://service.sap.com/~sapidb/012003146900000023012005E/Migration_Troubleshooting_Guide.htm
Hope it helps
Detlev

Portal Upgrade from EP6.0sp10 to EP6.0sp18

Hi All,
I am totally new to portal upgrade.we have current version of portal as follows:
portal version is: 6.0.10.2.0
KMC version is : 6.0.10.1.0 (NW04 SPS10 Patch 1)
Trex Version : 6.1.10.01
1. I am little confuse about whats the difference between Upgrading from EP6.0sp10 to "EP6.0sp18/ NW04sp18".Is the process for doing above is same or different.
2. I heard from SAP that TREX must be upgraded first before KMC and Portal.Is it true? whats is reason for that
?what should be latest SP and patch for TREX?any documents?
3. Is there any specific sequence to upgrade like TREX->WAS>portal>KMC?
4. What about customisations objects,will that be seriously affected after upgrade?How to prevent that?
can anybody give the Basic knowledge of upgrade and process flow.
Thanks in Advance.Help will be greatly appreciated.
Amit

Hi Amit,
EP6 SP18 ist the actual Service Pack for Enterprise Portal. NW04 SPS(!) 18 is the complete Service Pack Stack for the NetWeaver platform. So if you want SP18 for your portal installation, you should get the whole NetWeaver platform in use for that to SPS18 (as you wrote, for EP this is normally WAS, EP, KM, TREX, eventually NWDS).
TREX normally has the same counting as the rest, but in fact at the moment there is no SP18 for TREX, but it is renumbered again. The actual version reads TREX 6.1 Patch 26.
Sequence is WAS -> portal -> KMC -> TREX. Anyhow, you should not await a stable version if using mixed SPs, especially if mixing 10 with 18 So get all in line and then restart working with your installation.
As you normally shouldn't have customized standard objects but copied them into your own namespace and worked on these, there shouldn't be a problem. If you haven't gone this way, with such an update you will learn how urgent it is to keep this in mind --- never change standard objects...
Hope it helps
Detlev

Migration from 9.0.4 Portal to 10.1.2 Portal

Hi!
I'm in a customer who need's to migrate is Portal! The migration is from a standalone Database with standalone ias 9.0.4 to an cluster enviroment. The new production enviroment with 2 Oracle Databases 10.2.0.4 and 3 Oracle Ias 10.1.2 Instances.
Can you give some guidelines how to do this? I'm following this metalink note (330391.1) but I don't know if it is the best solution.
Thanks in advance
Tiago Soares

Hi,
The document you mentioned is not for portal upgrade.
For portal upgrade, you should consult this document (Doc ID: 262623.1) as the prime reference.
thanks,
AMN

Migration from Sun Java System Portal Server to the Oracle Portal

Hi, I'm in charge of evaluate the viability of a project that comprises the migration from Sun Java System Portal Server to the Oracle Portal. so I'm wondering if there is a kind of out of box migration tool in Oracle Portal or exists some guidelines to do the migration. In the other hand there is the option of migrate from Sun Java System Portal Server to Oracle WebCenter?
Thanks in advance!

The migration path for Sun Portal Server is Oracle WebCenter Suite. WebCenter is a significantly different architecture so there are no tools planned for the migration. However, we do plan to document and publish a whitepaper once we've assisted a few of the initial customer migrations.

Migrating queries from 3.5 to 7.0

hi,
we are in the process of migrating from BW 3.5 to BI 7.0. i would like to know, what are the steps to be executed to migrate queries from 3.5 to 7.0.

There is no migration and there is no new GUID and there are no new objects in database tables. However, once you save the query with the NetWeaver 7.0 (2004s) Query Designer you cannot edit it anymore with the 3.5 Query Designer.
In general the system logic allows you to still edit other 3.5 queries in the 3.5 Query Designer even if they are re-using elements of a query that has been edited with SAP NetWeaver 7.0 (2004s) BEx Query Designer as long as the reusable elements use no 7.0 (2004s) features (such as planning settings, new aggregation on formulas, variables with multiple default values).
Please also check the NetWeaver 7.0 (2004s) BI release notes and check note 832713.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4754bc74-0901-0010-3e82-b761b4c74937
Hope it Helps
Chetan
@CP..

NW04 EP6 Sp13 & ECC5.0 - Problem previewing MSS iviews

We have just completed an install of NW06 EP6 SP13 & ECC5.0 at the back-end and are looking to implement ESS and MSS. In trying to preview an MSS iview, I am getting errors with the connection. A pre-requisite may be missing. This is our landscape:
ECC5.0
Abap Stack
EP6 SP13
Java Stack
latest versions of MSS and ESS BPs
The system connectivity, aliase, SAP Logon Tickets have been configured. The test connection is working. The userids in Portal and ECC5.0 are the same. LDAP is being used for initial Portal authentication.
With EP6 SP2, a back-end plug-in was required and we are unable to find one for ECC5.0. What do we need on the back-end for the front-end and the back-end to communicate and allow us the capability of previewing the ESS and MSS iviews?
Any help on this will be greatly appreciated.
Thanks in advance.
Regards, Neeta

Hi,
Note that I am running EP6 SP13 in NW04 and our backend is ECC5.0. The link I am trying to preview/run is, per Ketuls suggestion :
http://sapptdapp1:50800/webdynpro/dispatcher/sap.com/pcui_gp~xssutils/XssMenu
The error message I get is (rather long....):
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
 com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to resolve JCOClient name 'SAP_R3_SelfServiceGenerics_MetaData'. No such JCO destination is defined in the SLD
 at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter(JCOClientConnection.java:493)
 at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.init(AbstractJCOClientConnection.java:247)
 at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.<init>(AbstractJCOClientConnection.java:221)
 at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.<init>(JCOClientConnection.java:101)
 at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnection(SystemLandscapeFactory.java:144)
 ... 53 more
See full exception chain for details.
Correction Hints
Retrieving a JCO destination with name 'SAP_R3_SelfServiceGenerics_MetaData' from the System Landscape Directory (SLD) failed, as the destination could not be found in the SLD. The most probable reason for that is that the destination has not been maintained yet.
Use the preinstalled Web Dynpro Content Admin application to check/edit the destination. Use the Ping and Test functions of the Content Admin to verify that each destination is properly configured.
Additional information about the System Landscape Directory and the Web Dynpro Content Admin can be found in the SAP Developer Network (SDN) and in the Online Help for the SAP Web Application Server (installed with SAP NetWeaver Developer Studio and available online).
Note: the above hints are only a guess. They are automatically derived from the exception that occurred and therefore can't be guaranteed to address the original problem in all cases.
System Environment
Client
Web Dynpro Client Type HTML Client
User agent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)
Version
DOM version
Client Type msie6
Client Type Profile ie6
ActiveX enabled
Cookies enabled
Frames enabled
Java Applets enabled
JavaScript enabled
Tables enabled
VB Script enabled
Server
Web Dynpro Runtime Vendor: SAP, Build ID: 6.4013.00.0000.20050628104636.0000 (release=630_VAL_REL, buildtime=2005-07-19:20:18:44[UTC], changelist=356134, host=PWDFM026)
J2EE Engine 6.40 patchlevel 95420.313
Java VM Java HotSpot(TM) 64-Bit Server VM, version:1.4.2_06-b03, vendor: Sun Microsystems Inc.
Operating system SunOS, version: 5.10, architecture: sparcv9
Other
Session Locale en_US
Time of Failure Wed Sep 28 08:42:46 EDT 2005 (Java Time: 1127911366734)
Web Dynpro Code Generation Infos
sap.com/pcui_gp~xssutils
SapDictionaryGenerationCore 6.4013.00.0000.20050606171348.0000 (release=630_VAL_REL, buildtime=2005-07-04:20:02:08[UTC], changelist=351717, host=PWDFM026.wdf.sap.corp)
SapDictionaryGenerationTemplates 6.4013.00.0000.20050606171348.0000 (release=630_VAL_REL, buildtime=2005-07-04:20:02:19[UTC], changelist=351717, host=PWDFM026.wdf.sap.corp)
SapGenerationFrameworkCore 6.4012.00.0000.20041104141254.0000 (release=630_VAL_REL, buildtime=2005-04-21:19:52:59[UTC], changelist=298452, host=PWDFM026.wdf.sap.corp)
SapIdeWebDynproCheckLayer 6.4013.00.0000.20050606172055.0000 (release=630_VAL_REL, buildtime=2005-07-04:20:08:32[UTC], changelist=351729, host=PWDFM026.wdf.sap.corp)
SapMetamodelCommon 6.4013.00.0000.20050606171700.0000 (release=630_VAL_REL, buildtime=2005-07-04:19:56:31[UTC], changelist=351724, host=PWDFM026.wdf.sap.corp)
SapMetamodelCore 6.4013.00.0000.20050606171700.0000 (release=630_VAL_REL, buildtime=2005-07-04:19:56:22[UTC], changelist=351724, host=PWDFM026.wdf.sap.corp)
SapMetamodelDictionary 6.4013.00.0000.20050606171352.0000 (release=630_VAL_REL, buildtime=2005-07-04:19:59:38[UTC], changelist=351719, host=PWDFM026.wdf.sap.corp)
SapMetamodelWebDynpro 6.4013.00.0000.20050609113138.0000 (release=630_VAL_REL, buildtime=2005-07-04:20:05:19[UTC], changelist=352442, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationCTemplates 6.4013.00.0000.20050628104636.0000 (release=630_VAL_REL, buildtime=2005-07-04:20:19:30[UTC], changelist=356134, host=PWDFM026)
SapWebDynproGenerationCore 6.4013.00.0000.20050606172055.0000 (release=630_VAL_REL, buildtime=2005-07-04:20:09:01[UTC], changelist=351729, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationTemplates 6.4013.00.0000.20050628104636.0000 (release=630_VAL_REL, buildtime=2005-07-04:20:19:30[UTC], changelist=356134, host=PWDFM026)
sap.com/tcwddispwda
No information available
sap.com/pcui_gp~xssfpm
SapDictionaryGenerationCore 6.4013.00.0000.20050606171348.0000 (release=630_VAL_REL, buildtime=2005-07-04:20:02:08[UTC], changelist=351717, host=PWDFM026.wdf.sap.corp)
SapDictionaryGenerationTemplates 6.4013.00.0000.20050606171348.0000 (release=630_VAL_REL, buildtime=2005-07-04:20:02:19[UTC], changelist=351717, host=PWDFM026.wdf.sap.corp)
SapGenerationFrameworkCore 6.4012.00.0000.20041104141254.0000 (release=630_VAL_REL, buildtime=2005-04-21:19:52:59[UTC], changelist=298452, host=PWDFM026.wdf.sap.corp)
SapIdeWebDynproCheckLayer 6.4013.00.0000.20050606172055.0000 (release=630_VAL_REL, buildtime=2005-07-04:20:08:32[UTC], changelist=351729, host=PWDFM026.wdf.sap.corp)
SapMetamodelCommon 6.4013.00.0000.20050606171700.0000 (release=630_VAL_REL, buildtime=2005-07-04:19:56:31[UTC], changelist=351724, host=PWDFM026.wdf.sap.corp)
SapMetamodelCore 6.4013.00.0000.20050606171700.0000 (release=630_VAL_REL, buildtime=2005-07-04:19:56:22[UTC], changelist=351724, host=PWDFM026.wdf.sap.corp)
SapMetamodelDictionary 6.4013.00.0000.20050606171352.0000 (release=630_VAL_REL, buildtime=2005-07-04:19:59:38[UTC], changelist=351719, host=PWDFM026.wdf.sap.corp)
SapMetamodelWebDynpro 6.4013.00.0000.20050609113138.0000 (release=630_VAL_REL, buildtime=2005-07-04:20:05:19[UTC], changelist=352442, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationCTemplates 6.4013.00.0000.20050628104636.0000 (release=630_VAL_REL, buildtime=2005-07-04:20:19:30[UTC], changelist=356134, host=PWDFM026)
SapWebDynproGenerationCore 6.4013.00.0000.20050606172055.0000 (release=630_VAL_REL, buildtime=2005-07-04:20:09:01[UTC], changelist=351729, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationTemplates 6.4013.00.0000.20050628104636.0000 (release=630_VAL_REL, buildtime=2005-07-04:20:19:30[UTC], changelist=356134, host=PWDFM026)
sap.com/tcwdcorecomp
No information available
Detailed Error Information
Detailed Exception Chain
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Error while obtaining JCO connection.
 at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker$1.fillSldConnection(DataTypeBroker.java:90)
 at com.sap.dictionary.runtime.ProviderFactory.internalResolveLogicalNameToJCODestination(ProviderFactory.java:408)
 at com.sap.dictionary.runtime.ProviderFactory.resolveLogicalNameToJCODestination(ProviderFactory.java:354)
 at com.sap.dictionary.runtime.ProviderFactory.internalGetProvider(ProviderFactory.java:215)
 at com.sap.dictionary.runtime.ProviderFactory.getProvider(ProviderFactory.java:180)
 at com.sap.dictionary.runtime.DdDictionaryPool.getProvider(DdDictionaryPool.java:87)
 at com.sap.dictionary.runtime.DdDictionaryPool.getDictionary(DdDictionaryPool.java:73)
 at com.sap.dictionary.runtime.DdDictionaryPool.getDictionary(DdDictionaryPool.java:48)
 at com.sap.dictionary.runtime.DdBroker.getDataType(DdBroker.java:149)
 at com.sap.dictionary.runtime.DdBroker.getSimpleType(DdBroker.java:170)
 at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getSimpleType(DataTypeBroker.java:242)
 at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getDataType(DataTypeBroker.java:213)
 at com.sap.tc.webdynpro.progmodel.context.AttributeInfo.init(AttributeInfo.java:485)
 at com.sap.tc.webdynpro.progmodel.context.NodeInfo.initAttributes(NodeInfo.java:771)
 at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:756)
 at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:761)
 at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
 at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
 at com.sap.tc.webdynpro.progmodel.controller.Component.getCustomControllerInternal(Component.java:436)
 at com.sap.tc.webdynpro.progmodel.controller.Component.getController(Component.java:365)
 at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.getPublicInterface(DelegatingComponent.java:142)
 at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdGetBackendConnectionsController(InternalFPMComponent.java:204)
 at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:170)
 at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
 at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:95)
 at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
 at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
 at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:346)
 at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:370)
 at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:608)
 at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
 at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:248)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:48)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:159)
Caused by: com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscapeException: Error while obtaining JCO connection.
 at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnection(SystemLandscapeFactory.java:146)
 at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnectionUnMapped(SystemLandscapeFactory.java:172)
 at com.sap.tc.webdynpro.services.sal.sl.core.SystemLandscapeInternal.getJCOClientConnectionUnMapped(SystemLandscapeInternal.java:83)
 at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker$1.fillSldConnection(DataTypeBroker.java:77)
 ... 50 more
Caused by: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to resolve JCOClient name 'SAP_R3_SelfServiceGenerics_MetaData'. No such JCO destination is defined in the SLD
 at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter(JCOClientConnection.java:493)
 at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.init(AbstractJCOClientConnection.java:247)
 at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.<init>(AbstractJCOClientConnection.java:221)
 at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.<init>(JCOClientConnection.java:101)
 at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnection(SystemLandscapeFactory.java:144)
 ... 53 more
Thanks, Neeta

Migration Guide from EP6 SP13 to Portal Netweaver EP 7.0 EHP1

Similar Messages

Maybe you are looking for