Migration issue iMac to MacBook Pro

Migrating data from iMac OS X Lion 10.7.5 to  new MacBook Pro.  Using ethernet and wifi connection to migrate.  MacBook has identified iMac for migration including code; but the iMac is not identifying the MacBook.  Any suggestions?

Your best bet is to start over, using +Setup Assistant+ instead of +Migration Assistant.+
See [Setting up a new Mac from an old one or its backups|http://web.me.com/pondini/AppleTips/Setup.html] (or use the link in *User Tips* at the top of the +Snow Leopard > Installation and Setup+ forum).

Similar Messages

  • When I try to migrate from imac to macbook pro my user account says this user needs attention before migrating. My e-mail does not migrate in the process. this never happened before i updated to Maverick

    When I try to migrate from imac to macbook pro my user account says "this user needs attention before migrating". My e-mail does not migrate in the process. This never happened before I updated to Maverick. I have repaired user permissions but this not make any difference

    Just a Follow-up - the migration went fine. The migration did not import Little Snitch, Flip4Mac and DivX, stating they were incompatible.  It also reported that Intego Back up Assistant has improper security setting (which I have not yet investigated).
    I am encountering small problems.  Safari would not open embedded pdf documents and instead showed a black screen.  This was fixed with instructions found at http://helpx.adobe.com/acrobat/using/display-pdf-browser-acrobat-xi.html and it now works fine.
    Importing 17 years of old mail from Eudora to Apple Mail was time consuming. mostly because of the pre-migration preening i did, but using Eudora file cleaner before the migrtaion helped a lot.
    I amy find some more glitches, but so far everything seems to be working.

  • Data Migration from iMac to MacBook Pro Issues

    Hello!
    I purchased a MacBook Pro and immediately began the data transfer through the Migration Assistant. Twelve hours later, it is at a screen saying "canceling migration", which it has been stuck on for five hours. I shut down my MacBook Pro and the iMac, and attempted to start the process over again. It appears that the data in fact did transfer, so I skipped the step asking me to transfer my data. Now I am at the screen to create my account, and it will not let me choose my full name or account name (due to that account information already being transfered over). That is the only account I would like to use, not any new account. I am unsure how to get around this step, any advice?
    Thanks!

    I just bought a MacBook Pro and am trying to use MA to migrate stuff from my iMac (Intel, OSX 10.4.11) to my MacBook Pro (Intel, OSX 10.6.3).
    Problem is, every time I try ("from" iMac "to" MacBook Pro), my iMac IDs my MacBook Pro and asks for the passcode, I give it, it then asks for the passcode again, I give it again, then it churns away with the message that it's "looking for other computers". On and on and on and gets stuck in this mode.
    I'm using ethernet between the two. Tried wireless also. Same issue. Downloaded the Migration & DVD/CD Sharing Update onto the iMac; it's already on the MacBook Pro. Same problem persists.
    Any suggestions? (among the ten zillion firewire cables I have, none fits the MacBook Pro, so haven't tried firewire yet).
    Thanks.

  • Migration from iMac to Macbook Pro using Migration Assistant / Time Machine

    Dear all:
    I have an iMac, Intel Core 2 Duo, with the latest Leopard version running. I have made a complete backup of my data on an external hard drive using Time Machine (only approx. 90 GB). I will be in New York next week and would like to buy a Macbook Pro. On the Apple website I found the following information regarding Time Machine:
    "Migration with style.
    To make setting up a new Mac even simpler, Time Machine shares its data with other Mac utilities. Use Migration Assistant to copy portions of any Time Machine backup to a new Mac, or select “Restore System from Time Machine” in the Leopard DVD Utilities menu. Choose any date recorded in Time Machine to set up your new Mac exactly as your previous Mac was on that date."
    Is it really so easy? I only have to make a Time Machine backup of my iMac to the external HD, buy a Macbook Pro, plugin the external HD the Macbook Pro, start the Migration Assistant, choose the latest Time Machine backup from the external HD and set up the new Macbook Pro with all settings and applications? Really? If yes, that would be awesome!
    Has anyone of you guys done this procedure in the past?
    Suggestions and comments are welcome!
    Regards,
    Tobias

    I've been working through this procedure this week. It's pretty good, and when it works it appears to work quite well, but there's still some bumps in the road:
    (1) Once you've migrated, Time Machine itself seems to be a little confused and future backups may fail. You might have to start again by changing to a new Time Machine disk on your new laptop. You may lose your older backups, it's not yet clear to me.
    (2) You can't restore from a previous backup during the migration, only the most recent one. (You can restore from an older backup using tools on the install CD if you need to.) I suspect this won't be an issue for you.
    (3) Migration Assistant once you've logged in a Migration Assistant while you're starting up a new machine seem to work slightly differently. For example, sometimes the newest copy of the applications in your Applications folder (say, iMovie) is preserved, sometimes it makes an exact restore of the old Applications folder even if it's an older version of the application.
    Overall it's been a pretty good experience, and what you want to do does work, but be prepared for the possibility of some issues. I tried this back in 10.5.0 a few months ago and had a lot of problems, things seem better now under 10.5.2.
    - Ert

  • Time Machine backups do not migrate from iMac to MacBook Pro

    I just moved from a iMac G5 to a MacBook Pro. I love Apple's migration tool, but it seems that Time Machine backups do not migrate.
    I checked with support, and did a basic amount of searching, and it seems that I need to erase and reformat the backup drive, losing all of my backups.
    Can this be true? That's a pretty screwy backup solution.
    Is it possible to rename the backup folder from "iMac G5" to "MacBook Pro"?
    Is it possible to add a MacBook Pro backup folder to the one already there?
    Any help is appreciated.

    I'm not quite sure what you mean. It sounds like you successfully migrated, and got everything set up properly on the new Mac.
    Now you want TM to just continue backing-up the new Mac to the old Mac's backups?
    If so, then no, that's not going to work. TM keeps the backups for each Mac completely separate. This is usually an advantage, so you can back up two or Macs to the same drive without any conflicts.
    Plus, the version of OS on your new Intel laptop is very different from the one from your old PPC desktop; a whole different set of drivers, and of course code for Intel vs. PPC.
    So TM on the new Mac cannot treat the old backups as if they were from the new Mac. It must start a whole new "sequence" of backups for the new Mac. If there's room on the disk, you can leave the old backups there until you're sure you don't need them, but that presents another problem: when you want to delete them, you can do it only one at a time, via TM, using the procedure in item #12 of the Frequently Asked Questions *User Tip* at the top of this forum. That's rather tedious and time-consuming, so most folks just erase the TM drive and let it start fresh.
    If I've misunderstood, please clarify the situation.

  • Migrate from iMac to macbook pro

    I am trying to migrate files from my Imac to my macbook pro.  I pull up the migration assistant on both computers and have both the computers connected by ethernet cord, but each computer never "finds" the other.  Also does it matter that the Imac is new and the macbook pro is old (earlier 200's)?  The software is updated to the latest for each.

    What OS X version are you using on the older MacBook Pro? Can we assume 10.7.5?
    If so, you may need to do this update: http://support.apple.com/kb/DL1695

  • How do i migrate files from a imac to macbook pro using an ethernet cable. the migration program asks for firewire and i don't own a fireWire.  I do own an ethernet cable though

    how do i migrate files from a imac to macbook pro using an ethernet cable. the migration program asks for firewire and i don't own a fireWire.  I do own an ethernet cable though

    A FW cable would be far faster & Easier, but with Ethernet you need a compatible version of Migration Assistant running on both Macs.

  • HT3231 Can i migrate keynotes from iMac to Macbook Pro?

    Can I migrate Keynotes from iMac to Macbook Pro?

    Do you mean the program itself? If so then if it was bought from the Mac App Store just logon to the MAS with the same Apple ID you used when you bought it and redownload and install on the new Mac.
    If it was bought on DVD then get that DVD out and install in on the new Mac then run Software Update to bring it up to its most current version.
    If you mean the Keynotes you created then just copy them over your LAN from one Mac to the other.

  • Migrating to 27" from MacBook pro Adobe Issues?

    I have a iMac 27" 5K retina hopefully arriving later today.  I would appreciate some advice from you all re migrating from my current MacBook Pro 17" 2011.
    I have Adobe Photoshop 5.1 and also Lightroom 5 as well as the Adobe CC Photoshop 2015 and Lightroom (subscriptions) on the MacBook as well as the usual Apple apps and Microsfoft Office etc.
    Can anyone suggest the best way to Migrate everything whilst leaving all the Apps available for use on the MacBook?
    I have read that Setup Asst should not be used for Adobe Apps.  Can anyone confirm that please or let me know your experiences?
    I also have a CCC (Carbon Copy Cloner version of the old system on an external drive)
    Any help advice or warnings greatly appreciated.
    Thanks in advance.
    Roger

    Hi,
    changing anything inside the WinClone image is simply not possible.
    Have you tried the F8 Safe Boot possibility when booting Windwos yet ?
    See here for some possibilities you have with it: http://support.microsoft.com/?scid=kb%3Ben-us%3B315222&x=10&y=11
    For example, you can force the use of a generic VGA graphics driver with it.
    Good Luck
    Stefan

  • Imac and Macbook  Pro reset parameters issue

    Looking for advice please.
    Both my Imac and Macbook pro have not resonded upon startup and I have had to reset the paramters on several occassions.
    Can anyone advise why this may have happened.  Both computers less than 4 months old.
    Thanks

    Sometimes files get corrupt or lose their permissions this is normal part of most operating systems. When you lose permissions to a file it will not let you read or write to that file.  This can cause problems with your system because to do work on your system you need to have access to read and write to some files. 

  • IMac and Macbook Pro no longer connecting to the Wifi?

    Hi there,
    I've been in London this weekend, only to return home to find issues connecting to my wifi. Weirdly, it's only the iMac and Macbook Pro having trouble, everything else is connecting fine e.g iPad, Phone, Android Tablet etc.
    I'm getting disconnected around every 20 seconds and cannot figure it out! It's so frustrating as I'm wondering if there's been an update released for OS X that it has downloaded recently? Especially seeing that when I run windows from bootcamp on my iMac, it doesn't disconnect. And I also don't believe it's an issue with the hub.
    Has anyone got any suggestions? I've tried removing the network and re-adding, help for about an hour but still not much use.
    Thanks, Matt

    Wi-FI connection drops
    Wi-Fi Problems in OS X Yosemite
    Wi-Fi Problems in OS X Yosemite (2)
    Wi-Fi Problems in OS X Yosemite (3)
    Wireless Diagnostics
    Also try turning off Bluetooth.

  • Photoshop elements 10 will not migrate to my new macbook pro/retina display.  There is no CD/DVD player on this machine.  Any suggestions on how to get Elements onto my machine?  Yes, I have the disk(s).

    Photoshop elements 10 will not migrate to my new macbook pro/retina display.  There is no CD/DVD player on this machine.  Any suggestions on how to get Elements onto my machine?  Yes, I have the disk(s).  Am I going to have to buy an external CD/DVD player to load this one program:(

    I have ordered a USB3 BluRay/DVD/CD player/burner and will use that both with my iMac ( in which the Superdrive seems to be failing ) and the MBPro Retina I just bought .

  • IMac or macbook pro? for architecture

    Study architecture and work with autocad and 3dmax (and other Autodesk products), I want to know whether an iMac or MacBook Pro these programs work without problems, because most tells me it's much better version in the window, I saw another option for is there that allow the boot camp, but idk if diminish performance or would have any problem. Thanks and please I love apple products and I have a couple of them but not in this case and tried the mac and I need answers and considering what you'll use.

    I agree the Mac is good for some many things especially for consumers and light business needs, ranked very highly but it's not for everyone and perhaps for what you require a more specialized Windows machine is better suited.
    Windows 7 will get support until 2020, Apple tends to upgrade their OS X versions annually, so that's a slight drawback for someone who needs stability in their software amd investment.
    The only somewhat 3D capable laptop Mac is the 15" MacBook Pro and it's video card isn't as powerful as PC models for specialized professional needs. Neither is the one in iMac for that matter as Apple customers have more or less gone for thinness, style and lightness verses uber performance, which mean thicker and heavier.
    The MacPro hasn't seen a update in two years, PC's with Xeons have outstripped it for performance. Apple recent issues a press statement it's being pulled from European markets for not updating to meet new EU requirements (set nearly three years ago.)  So perhaps a powerful Mac tower is out and a PC one with Windows 7 is better suited to your professional needs at this time.
    http://arstechnica.com/apple/2013/01/apple-to-stop-shipping-mac-pro-in-europe-on -march-1/
    http://www.cbscores.com/index.php?sort=ogl&order=desc
    Also then comes the operating system and programs tailored for it, which you really would have to run Windows 7 on the Mac in Bootcamp, but may have issues etc for hardware compatability also problems with tweaking things and custom drivers etc., as Mac's are not generic PC's although they can run Windows 7 in BootCamp
    I can make some suggestions for some uber PC machines for awesome professional results.
    HP has a line of Elitebook 8770w Mobile Workstations with some truely awesome video cards for fast rendering speeds costing upwards anywhere up to about $6500 if you so need it, plus the displays are larger and  detailed.
    Sager has some awesome machines anywhere from $2000-$5000
    Dell has their Alienware series, but that doesn't sound so professional
    Asus has their The Republic of Gamers line of powerful prebuilt desktops and laptops, but they all don't look like 3D gamers machines.
    Not exactly as nice as a Mac for the thinness of hardware, but they are performance powerhouses for specialized needs, and they should come (request it) with Windows 7 Professional (so you can run XP programs too).
    Windows 7 is not a bad operating system, everyone seems to love it, even Mac users like it.
    It does need the services of a professional Windows geek to make sure it's crapware free and anti-virus installed, System Restore Disks and images made before being used online. I also suggest Deep Freeze if you really want a almost trouble free PC, a simple reboot resets the machine back minus any changes.
    I hope this assists and perhaps you will consider getting a Mac or iPad for less intensive requirements.

  • HT5268 Just purchased Imac and Macbook pro and upgrades to Mountain Lion. Java will not run with one important site where my Grandson is in Kindergarten out of state with in room camera. What to do. This is very disappointing and non of apple geniuses kno

    My new IMac and Macbook Pro are each loaded with Mountain Lion. Have Office for Mac also
    When I try to see my Grandson on webcam out of state the login will not activate. For PC use I needed Java and Active X to let it run. My Java is checked as ready to go but nothing happens. Otherwise these are great computers. Please help me through the process. The Geniuses at my apple store can't understand what to do.
    [email protected] or [email protected]

    By default, OS X does NOT come with Java installed nowadays. You need to open the Java Preferences app found in Utilities; when you do that the first time, it will inform you of the fact and offer to install the product for you.
    Afterwards, due to a major security issue we had back in the first quarter of the year, the plugin is disabled by default. You need to revisit the Preferences and enable manually. It will auto-disable if unused in awhile.
    Lastly, you may have to adjust which Java instance is being used, the 32-bit or the 64-bit. Default is 64-bit, but some applets crash & burn or outright refuse to run in such a platform. You can prioritize which version you prefer by dragging on top in the Preferences.

  • ITunes Store wont load on my iMac or Macbook Pro

    After updating iTunes to the latest version, 11.1.1, on both my iMac and Macbook Pro I have not been able to log in and view my account details. I also had trouble downloading previous purchases. I had to quit the program 3 times and re-download the purchased items just to get them into my library. When I do attempt to log into my account area to view details, the Grey box at the top of the screen just says "Accessing iTunes Store" with the spinning bar for about thirty (30) seconds then it just goes Grey with the Apple Logo in the center and never pulls up my information?
    Is anyone else having this same issue? And has anyone figured out a work around?

    Hey danny1507,
    Thanks for the question. I understand you are experiencing issues with iTunes for Windows. The following resource may help to resolve your issue:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    Thanks,
    Matt M.

Maybe you are looking for

  • Need help in SQL , Subtract column based on the condition in the Row

    Hi all , I'm new to Sql Queries; I have a requirement which involves Sql query, Can anyone tell the How to proceed or provide me Sql Here goes the requirement Current Table ID |-|Month|-|Data 1|-|Jan-10|-|10.00 2|-|Feb-10|-|20.00 3|-|Mar-10|-|30.00 4

  • Startup/wake up issues

    Since I got this computer the issue has been getting worse: 1-When I turn the computer on, I always hear the cd drive check for startup disk, but often the process stops there. I have to start the computer a couple of times to finally finish the proc

  • Marketing Attribute in Condition Table (Listing)

    Hi Guys !! Usage in a condition table for listings. Can a marketing attribute be added to the field catalog and used as part of the access seq when proposing a listing in an order or activity journal? Urgently Help needed.

  • How do i open google searches in new tab?

    Until quite recently I was able to open a Google search in a new tab by just clicking on the page link. Now I can't, even though my settings are set to do this. The only way I have been able to open in a new tab is by right clicking and clicking "Ope

  • My newest events show up as black squares

    The newest events I've imported show up as black key photos and no images show when I roll my mouse over the event. When I am in photos view all the pictures show up and can be opened. It looks like this: When I change the size of the events by using