Migration Issue:Urgent: Oracle 9i to 10g Application Server

Hi,
Using Oracle Jdev (ver 9.0.3.1) I have created a ear and want to deploy it in oracle application server 10g
(release 2). Will there be any issue during deployment or during run?

Generally speaking going up from 9i (902) to 10g (904) is very simple - going up to 10.1.2 of Forms would require a recompilation.
There are not really any "big" issues in moving to these versions.
Regards
Grant Ronald
Oracle Product Management

Similar Messages

  • Having a problem accessing OEM 10g application server control console!

    Hi everyone,
    I just installed AS 10g (10.1.2.0.2) Forms and Reports Services Standalone on a Windows 2003 machine. The installation went fine, the instance was created successfully.
    I started all the services, when i try to access EM :
    http://fms-as.mathtechinc.com:18100. I get a blank screen.
    I can get to the AS welcome screen by using http://fms-as.mathtechinc.com:80, but when I click on the link to log on to Oracle Enterprise Manger 10g Application Server Control. I still get a blank screen.
    I checked the port numbers in port.ist.ini and the port for
    application server control port =18100.
    I am not sure what I am doing wrong.
    Thanks for your help in advance!

    Thanks Jacco... now It is asking for the user name: and password. I do not remember assigning a user name. When I installed the AS, I created an
    instance name and isa_admin password.
    I tried to use the instance name as the username it was not accepted.
    Thanks again!

  • Urgent: problem running reports in Oracle 10g application server

    Hi all,
    our problem is that we deployed a jsp report as Ear file in Oracle 10g application server in infrastructure node.deployment says successfull.when we try to run that report it says 401 unauthorised.while sending request we are passing the database username,password &sid is this correct or any configuration setting to be done to make it run.
    one morething normal jsp works fine.when we run reports jsp it gives the above mentioned 401 error.

    hello,
    when you deploy reports JSPs they still require the reports specific componentes (e.g. TLD file, classes, ...) etc be available. i doubt that's the case in your ear file.
    thanks,
    ph.

  • Setting of ICONS in Oracle 10G Application Server

    Hi...
    I'm facing a problem of Icons which are not displayed at run time.
    I'm using Oracle 10G Application Server.
    plz tell what setting should i do.
    its urgent.
    Thanks & Regards
    Sanjeev Kumar

    1 did u put the icon file in the forms folder in IAS?
    2 Are you able to access the icon if u directly enter the icon value ?
    http://www.Alexyscorp.com/myicon.gif
    if its not port 80 enter the port
    3 In the httpd.conf file whats the root directory ? Try putting the icon there
    Best Regards
    Rajesh Alex
    Message was edited by: Rajesh Alex
    Alex(AlexysCorp)

  • Is it possible to upgrade only apache in oracle 10g application server.

    Hi All,
    I have to upgrade only apache in oracle 10g application server with out upgrading oracle 10g as.
    Is it possibel to upgrade only apache version in oracle 10g application server. if yes.could you suggest the steps that i need to follow.
    This is very urgent.
    Thanks in advance.
    Regards,
    Sathya

    If your trying to upgrade just apache in that oracle home, then no. If your trying to upgrade to a real apache version, from apache.org, mod_oc4j won't work. You need to use Oracle's version of Apache or HTTP Server.
    Is there a reason you only want to upgrade Apache and not the whole oracle home?
    There are ways to do it, but it wouldn't be supported by Oracle and I wouldn't recommend that either.
    Edited by: user11993398 on Apr 13, 2011 3:04 PM

  • Oracle 10g Application server - patch

    Hi All
    Any one pls. tell me how to find out the Oracle 10g Application server , latest patch update in Sun box? Also how to verify the security issues?
    Thanks & regards
    Bala

    Simply logon to metalink.oracle.com, click on "patches&updates", next click on "Quick Links to the Latest Patchsets, Mini Packs, and Maintenance Packs" and select the proper product. If you do not have access to metalink, contact your oracle sales representative (or internal contact that can grant access).

  • 11g Database Migration with Old 10g Application server

    Hi,
    Our Database version : 10.2.0.3.0 10gR2
    Oracle Application Server - 10gR2.
    Now we are planning to migrate our database from 10gR2 to 11g R2. But now we are not going to migrate our Application server. We are continued to use same 10gR2 application server.
    Please provide me what are the pre-checks/ Checklist/ knows issues/ obsolete features i must taken care before and after migrate- from the forms&reports developer and application server admin point of view.
    for example some where i seen that the DB Password for 11g is case sensitive so we have to set a variable in form env file like that.
    Thanks in advance.

    Hi
    As a general rule, most sql will perform as fast (or faster) on 11gR2 than 10gR2 - there will always be exceptions that's depends upon each one's application So best choice is to perform a test to ur whole project application. Because as u will find out may be someone has a problem but will not face u because of different application, concepts of handeling a solution for the bussiness requiremnets of the end use but it's nice Step to Rethink before u will be in a problem to pre-consider i appreciate :)
    Well, i would also recommand Studing Oracle 11gR2 Upgrade Companion
    http://www.google.com.eg/search?sourceid=navclient&ie=UTF-8&rlz=1T4ADFA_enEG418EG418&q=Oracle+11gR2+Upgrade+Companion
    Hope u Study and Feed ur Knowlege through it...
    Step by step Upgrade from 10gR2 to 11gR2
    http://sarith.wordpress.com/2010/10/26/step-by-step-upgrade-from-10gr2-to-11gr2/
    Best Regards,
    Abdetu...

  • Deployment of class file in oracle 10g Application Server

    Hi,
    I have a class file
    import java.io.*;
    import javax.servlet.*;
    import javax.servlet.http.*;
    public class HelloWorld extends HttpServlet {
    public void doGet(HttpServletRequest req, HttpServletResponse res)
    throws ServletException, IOException {
    res.setContentType ("text/html");
    PrintWriter out = res.getWriter();
    out.println("<HTML>");
    out.println("<HEAD><TITLE>Hello World</TITLE></HEAD>");
    out.println("<BODY>");
    out.println("<BIG>Hello World</BIG>");
    out.println("</BODY></HTML>");
    now I like to deploy(in oracle 10g Application Server) and run this file.
    please help me.

    Hi
    You have to deploy Servlet as a WAR File. I hope you already have web.xml file which u can get automatically in eclsipse during creation of servelet. I am not sure what ide u r using here. If u have created servlet in eclipse then I would suggest create a project dynamic webproject if u have not where IDE create all required files autmatiicaly and even you can deploy application from there itself.
    If you wanted to deploy manually then follow below steps (if u have war file)
    I am assuming you already created a Weblogic Domain and have admin username/password. Start your domain. Login into weblogic console like http://host:port/console and use admin username/password. Then from Deployments section, deploy the above WAR file. In Weblogic you can deploy JAR (EJBs, java files), WAR (web jsp, html, webservices, servlets) or EAR (JAR + WAR). In your case its just a WAR file.
    Thanks
    Sujit Singh

  • Oracle 10G application server integrate with e-business suites 11i

    Hello,
    Server A:
    i have one UAT server which is installed with e-business suites 11i. The users logon to discoverer from e-business suites using the username and password stored in e-business suites.
    Server B:
    then, i now hv to set up a 10G application server and 10G discoverer on a new server. The user request that they want to login to discoverer using the username and password as mentioned above. They reject to logon to database using 'connect directly', 'open connection' or 'private connection'.
    what can i do in order to synchronize the username from Server A to Server B so that they can logon using the username and password they created in e-business suites.
    thank you.

    follow note 313418.1 it will let you use your oracle apps 11i with discoverer 10g, with the same user name and password, i did it before you may want to check my post after you check oracle note
    http://oracle-magic.blogspot.com/2006/11/upgrading-discoverer-4i-to-10g-on-apps.html
    fadi hasweh
    http://oracle-magic.blogspot.com/
    Oracle is not Magic, it just takes years of experience

  • Installation of Oracle 10g Application Server in custom port or 1522

    I want to install Oracle 10g Application Server in Port 1522 or some other port as in port 1521 Oracle 10g database server is already installed.
    But every time I try to install Oracle 10g Application Server it give the warning about 1521 port and then start installing on same 1521 port automatically.
    What should I do if I want to install in some other port ?
    Please help
    Thanx

    As a method, to install an OAS on a custom port,
    1) make a file called staticports.ini and define your components/ports there.
    2) on the Specify Port Configuration Options screen, select Manual and specify this file.
    Follow this link for details for 10g.
    http://download.oracle.com/docs/cd/B14099_19/win.1012/install.1012/install/reqs.htm#CHDJACIG
    However, there are ways to use the same port for OAS and DB depending upon the version of your listener. Check the version of your DB Listener, and if it is 10.1.0.2 or higher then you are just good to go with automatic port assignments.
    AMN

  • Deploying Oracle Retail Applications in Oracle 10g Application Server

    Hi All..
    Can anyone help me to know:
    How to Deploy Oracle Retail Applications(like RMS,ReIM,RIB) in Oracle 10g Application Server.
    Regards.

    Hi Ahmed,
    It sounds you have not yet had the chance to lay eyes on the installation guides - they are not perfect but should point you in the right direction.
    Please start at http://www.oracle.com/technetwork/documentation/oracle-retail-100266.html and check out the install guide per application module.
    Best regards,
    Erik

  • Auditing in oracle 10g database and oracle 10g application server

    Dear friends,
    We have oracle 10g application server and oracle 10g database server in place.My criteria is to audit users connected using oracle application user credentials to the database.
    Can you please tell me how can i do it.
    Thanks & regards,

    Its the database connection you want to track. The session audit will show where it came from.
    Auditing is turned using this command:
    alter system set audit_trail = DB scope=spfile;
    Note: The use of spfile will require a DB bounce before audit starts
    To audit Sessions:
    audit create session;
    Query by Audit Type:
    SELECT A.USERNAME,
    OS_USERNAME,
    A.TIMESTAMP,
    A.RETURNCODE,
    TERMINAL,
    USERHOST
    FROM DBA_AUDIT_SESSION A
    WHERE USERHOST = <replace with iAS servername> ;
    By User
    SELECT USERNAME,OBJ_NAME,ACTION_NAME , TIMESTAMP
    FROM DBA_AUDIT_TRAIL WHERE USERNAME = 'SCOTT';
    Check for users sharing database accounts
    select count(distinct(terminal)),username
    from dba_audit_session
    having count(distinct(terminal))>1
    group by username;
    Attempts to access the database at unusual hours
    SELECT username, terminal, action_name, returncode,
    TO_CHAR (TIMESTAMP, 'DD-MON-YYYY HH24:MI:SS'),
    TO_CHAR (logoff_time, 'DD-MON-YYYY HH24:MI:SS')
    FROM dba_audit_session
    WHERE TO_DATE (TO_CHAR (TIMESTAMP, 'HH24:MI:SS'), 'HH24:MI:SS') <
    TO_DATE ('08:00:00', 'HH24:MI:SS')
    OR TO_DATE (TO_CHAR (TIMESTAMP, 'HH24:MI:SS'), 'HH24:MI:SS') >
    TO_DATE ('19:30:00', 'HH24:MI:SS');
    Attempts to access the database with non-existent users
    SELECT username, terminal, TO_CHAR (TIMESTAMP, 'DD-MON-YYYY HH24:MI:SS')
    FROM dba_audit_session
    WHERE returncode <> 0
    AND NOT EXISTS (SELECT 'x'
    FROM dba_users
    WHERE dba_users.username = dba_audit_session.username);
    Other audits you might consider:
    audit grant any object privilege;
    audit alter user;
    audit create user;
    audit drop user;
    audit drop tablespace;
    audit grant any role;
    audit grant any privilege;
    audit alter system;
    audit alter session;
    audit delete on AUD$ by access;
    audit insert on AUD$ by access;
    audit update on AUD$ by access;
    audit delete table;
    audit create tablespace;
    audit alter database;
    audit create role;
    audit create table;
    audit alter any procedure;
    audit create view;
    audit drop any procedure;
    audit drop profile;
    audit alter profile;
    audit alter any table;
    audit create public database link;
    Best Regards
    mseberg

  • Apply patch 10.1.2.3 on oracle 10g application server 10.1.2.0.2

    Dear All,
    i have installed oracle 10g application server 10.1.2.0.2 with infrastructure and forms & report.
    now i downloaded the patch 10.1.2.3 to apply on it.
    I have two homes in my application 10g server (infra and forms&report).
    should first i apply apply patch on infrastructure and than on forms & report home.
    am i correct.? can you please give me procedure how to apply the patch on 10g application server 10.1.2.0.2.
    Thanks & regards,
    Sher khan

    Hi,
    can you please correct me in sequence..
    1) install oracle 10g application server including
    i) infrastructure
    2) install forms and report.
    3) apply patch 10.1.2.3 on application server
    3.1) apply patch on forms and report
    3.2) than apply patch on infrastructure..
    is it correct sequence thanks,
    Thanks & regards,
    Sher khan

  • Anybody installed Oracle 10g application server on windows 2008 (64 bit) se

    Has anybody installed Oracle 10g application server on OS : windows 2008 (64 bit) server.
    which version of OAS we should use?l. we are using dell server .
    regds
    santosh
    Edited by: user5429538 on Feb 24, 2010 2:59 AM

    Hi Santosh,
    Has anybody installed Oracle 10g application server on OS : windows 2008 (64 bit) server.I dont think any version of Oracle Application Server is certified for windows 2008 yes.
    But, u can Install Oracle Application Server 10g Release 2 (10.1.2.0.2) on windows 2003 (64 bit) server
    Please refer below links for download and to check certification:
    http://www.oracle.com/technology/software/products/ias/htdocs/101202.html
    http://www.oracle.com/technology/software/products/ias/files/as_certification_r2_101202.html
    http://www.oracle.com/technology/software/products/ias/files/oracle_soa_certification_101310.html
    Hope helps
    Regards,
    X A H E E R

  • Oracle 10g Application Server 10.1.3.0 Installation for 64 bit

    Hi,
    Can anyone let me know if there is an Oracle 10g Application Server 10.1.3.0 download available for 64 bit windows 2003 Enterprise Edition installed on Intel X64 Xeon Processor (EMT64T).
    Rgds
    Satya

    Thanks jm.
    But when i tried to check from otn downloads there is a 64 bit deployment version available for itanium processors which we are not able to install on xeon processors. Anyways i installed the 32 bit version of 10G 10.1.3 on 64 bit and its working fine. Can you find out if there is any memory consuption for the 32 bit server when installed on 64 bit windows server
    thanks once again for your promt reply

Maybe you are looking for