Migration Jobs - two different SCCM sites into one

Migration Jobs Question.
Migrating to SCCM 2012 R2. I have two different Migration Source sites. One is 2007 and one is a 2012 R2-Development. Trying to merge both to one SCCM 2012 -Production site.
SCCM 2007 has been moved to 2012 Prod, now I'm looking to move 2012 DEV to prod. Do I lose the ability to run "Objects modified after Migration" on the 2007 object data?
As I understand, once I change the source hierarchy, all previous Migration Jobs are removed.

Hi Ronni
When I add a new Source Hierarchy, It looks like it removes the old.
So this is what I just tried:
*Changed the Source Hierarchy to SCCM 2012DEV
**Didn't rerun thought the whole process. Noticed that the 2007 Hierarchy was removed. Source Site Code 2012DEV,
Status Ready for next gathering Process"
Then I:
*Clicked "Specify Source Hierarchy"
**Noticed that the 2007 was part of the drop down list
previous Migration Jobs returned
I guess the next step is to migrate a item from 2012DEV to 2012PROD and see what happens.

Similar Messages

Combining two different Chart types into one graph

Hi All,
I am developing a graphical BW report using WAD. I need to place two differnt chart types into one graph.For example, I have Volume and Quantity .Here the volume should be displayed in Bars and Quantity should be displayed in Lines in the same graph. X axis(Country) is same for these two . I am not sure how to achieve this. Please do let me know if anyone has solution for this.
Thanks for your time.
Thanks & Regards,
Raja

Hi Andreas,
One word I can say is 'Perfect' . Even though I am out of office now,I hope the example perfectly will solve my problem.I will try it.
Thanks for Aduri and Pcrao also for their suggestions .
Thanks again and I assigned points to all to say my thanks
Regards,
Raja

Recording two different size windows into one timeline

Hello, I wonder if anyone can help.
I'm trying to capture two different size animations, one 900
x 600 and one much bigger, say 1280 by 700....How can I get them
into the same timeline? It seems captivate only allows one size
frame recording per movie.....
Any hints?
cheers
zig

Hi zig
The only way I can fathom this happening is to take Captivate
and record the larger. Then use the Project > Resize option to
reduce the size of the larger to match the smaller. Then import
that/those slide(s) into the smaller.
Or, you could go the other way around. Record at the larger,
leave it at that size, then import the smaller into the larger via
File > Import > Slides/Objects.
Cheers... Rick

Data in two different coulmns merge into one column

I am using following script to create external table with data.
CREATE TABLE external_class(
item_no varchar2(255),
max_range varchar2(255)
ORGANIZATION EXTERNAL
TYPE ORACLE_LOADER
DEFAULT DIRECTORY DATALOAD
ACCESS PARAMETERS
RECORDS DELIMITED BY NEWLINE
FIELDS TERMINATED BY ','
MISSING FIELD VALUES ARE NULL
(item_no,max_range)
LOCATION ('class_newc.txt')
REJECT LIMIT UNLIMITED;
Problem is that its merge both columns into one column.
I want two seperate columns.
Data is in microsoft excel spread sheet.
I saved as txt(TAB DELIMITED) txt
Data appears in clas.txt file as below:
"400     "     4177.64
"404     "     5574.64
"406     "     5333
"408     "
"409     "
"450     "     10.83
"478     "
"482     "     4820
I ran the above script to create table.
Table Created
SQL> desc external_class;
Name Null? Type
ITEM_NO VARCHAR2(255)
MAX_RANGE VARCHAR2(255)
SQL> select count(*) from external_class;
COUNT(*)
3036
but with
select * from external_class;
ITEM_NO MAX_RANGE
"400"4177.64
"404"5574.64
"406"5333
"408"
"409"
"450"10.83
"478"
"482"4820

thanks its work.
Actually I created other file as below
Item_no-----max_range
400     4177.64
404     5574.64
406     5333
408
409
450     10.83
and use creation script as below:
CREATE TABLE external_class(
item_no varchar2(255),
max_range varchar2(255)
ORGANIZATION EXTERNAL
TYPE ORACLE_LOADER
DEFAULT DIRECTORY DATALOAD
ACCESS PARAMETERS
RECORDS DELIMITED BY NEWLINE
fields terminated by whitespace
MISSING FIELD VALUES ARE NULL
(item_no,max_range)
LOCATION ('class_newa.txt')
REJECT LIMIT UNLIMITED;

Writing data from two different acquisition rates into one file

Hi,
I'm using a compactRIO, and I have an anemometer outputting data at 4Hz to the serial port on the controller, and I am using a 9237 module to read strain from two channels at 40Hz. I would like to record all this data in one file, but I'm unsure how to have the data points match up with respect to time since they are read at different rates. Basically I have 10 strain data points for every one anemometer data point, but that one data point needs to somehow be associated with the other 10 read in the same amount of time. It would be okay to "extend" the slower data to the 10 strain points, and likewise to the next ten when the anemometer refreshes its values.
Thanks for any input!
Andrew

Check out the Queue multi-plexer vi from the examples. C:\Program Files\National Instruments\LabVIEW 2009\examples\general\queue.llb\Queue Multiplexer.vi
If each data acquisition loop enqueues data to one file writing loop the data is writen in order. Queues are really a good way to multiplex data sources
Message Edited by Jeff Bohrer on 01-29-2010 09:44 AM
Jeff

Combining two separate libraries (with two different Apple IDs) into one

My fiance is moving in this weekend, and we hope to get rid of her computer to make space. She has a fairly large iTunes library, some ripped from CD and about 100 purchased from iTunes. I want to move her library and combine it with mine on my computer. I've read through the help files for consolidation, backup, and moving libraries from one computer to another, but none seem to apply to this special case. Once we transfer her files, we plan to cancel her Apple ID account since it wouldn't be authorized on any computers anymore.

Once we transfer her files, we plan to cancel her Apple ID account since it wouldn't be authorized on any computers anymore.
You can't cancel the iTunes account.
Besides, you still need it to authorize your computer to play the songs she purchased.
To get the music onto your computer, just copy it over to yours, then File -> Add folder to library and select the folder whwenre you put the music.

Merging two separate MUSE sites into a single MENU system and Paid & online BC eCommerce site

Hi all! I am stuck trying to figure out a Process Conundrum:
1> I have a BC site with e-commerce ready to go - paid - online with store template in place.
2> I also Have a 2nd MUSE created web site (with the client content/pages) that needs to merge with that E-commerce BC site.
What is the move to merge the two separate sites into a single site with the Menus all in proper order?
Is this simple and I can not see it? (merge the two sites in a folder and reopen in muse for new menus?
Or do i need Dreamweaver to assist in the merge?
In other words:
What is the PATH/PROCESS to merge a 2nd MUSE designed web site (sans e-commerce), in order to tie into the online BC e-commerce template paid site - so the menus update together as "one" site?
Menu Update Concern: merging two separate MUSE sites into a single MENU system with the "Paid on line Active BC e-commerce Template". How do it do it Process wise so that the menus adjust automatically... so they are "one" menu.
Reminds me of an old joke: Q: "What did the Buddhist say to the hot dog vendor at the ball park?"
A: "Make me one with everything!"
ONWARD>>>>>
Possible paths I am about to take attempting to Solve the problem - and scale the learning curve...
download the BC e-commerce site into Dreamweaver -
export the 2nd muse site by publishing it to a unique folder.
combine them by going back into dream weaver and attempting to figure out linking the menus. - perhaps they are automatic there too.
or load them both up to BC and back down to MUSE to fix the menus?
I appreciate Any recommendations, hits or humor that you could help on this.
Cheers!

Thanks, Liam... I will get it eventually...
Sadly: I do not have a budget to hire this out...
   - I have gone through lots of the BC and Muse training exercises. Adobe
   and BC Gurus.
But... if the only problem is that I need to work though my partner site BC
interface...
   - that would be fine...
   - so would using dream weaver....
I will go back and review the BC interface and also dreamweaver
capabilities.
without a budget... i need to figure it out... please do point to any
material or training you might be able to point me to.
I don't have to use muse, if that is my sticking point. I just need to get
the project up and BC looks perfect.
Thanks.

I am unable to update my apps... in my purchases page it appears as "update", then a message tells me to log on with the Apple ID I purchased the app with... Well I have tried my two different accounts and neither one will work, can someone help ??

I am unable to update my apps... in my purchases page it appears as "update", then a message tells me to log on with the Apple ID I purchased the app with... Well I have tried my two different accounts and neither one will work, can someone help ??
And is there any way to sync all my purchases and accounts to just have one... It is a bit stupid that you dont even get a list of something of what account you may of used, or some kind of hint, so you could log on to the right account. I am really stuck ...
Please Advise......

You can't merge accounts. But you can check your purchase history:
iTunes Store & Mac App Store: Seeing your purchase history and order numbers
http://support.apple.com/kb/HT2727
Also, what may seem stupid to you... may be a protection of privacy to others.

Can I use two different itune accounts on one computer?

Can I use two different itune accounts on one computer?

1. Give her a separate user account on your computer. If you have a backup copy of the library, you can restore it.
2. If you encounter a 90-day waiting period, click here and ask the iTunes Store staff if they'll remove it.
(125941)

Hello, I want to perform a simple task. I have two Adobe ID accounts linked to two different email addresses. One account i do not want to use anymore but it is linked to my main email account. the account i do not want anymore is still in its free stage

Hello, I want to perform a simple task.I have two Adobe ID accounts linked to two different email addresses. One account i do not want to use anymore but it is linked to my main email account. the account i do not want anymore is still in its free stage and i have not purchased anything with it. My other Adobe ID account is linked to an email i rarely use and don't particularly want to use. i have tried changing the linked email account to my regular one i use. But it obviously does not allow me because of it already being linked to my other non used obsolete Adobe ID account. Is there any solution to this?? Please help.

Adobe contact information - http://helpx.adobe.com/contact.html may help

I have two different apple id's, one on my computer and one on my phone. i connected my phone to sync music and i lost most of my music. i realised that the music i lost is from the apple id on my mac. how do i undo this mess? help anyone?

i have two different apple id's, one on my computer and one on my phone. i connected my phone to sync music and i lost most of my music. i realised that the music i lost is from the apple id on my mac. how do i undo this mess? help anyone?

The iphone will mirror the selected content of your computer.
Make sure everything is on your computer. Select what you want on your iphone, sync

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either.

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either. I have an iphone 4 that will not connect to 5ghz.
thank you!

Your AirPort Express is already providing two separate 2.4 GHz and 5 GHz bands, but each band is using the same wireless network name.
This is the default setup for the AirPort Express, which is recommended for most users. The theory here is that devices will automatically connect to the best quality signal based on their capabilities and distance in relation to the AirPort Express.
It is possible to assign a different name to the 5 GHz band, and then "point" devices at that network to connect. Some users swear by this option.....(I am not one of them).... but you might want to give it a try to see how it works for you.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Express
Click Edit in the smaller window that appears
Click the Wireless tab at the top of the next window
Click Wireless Options near the bottom of the next window
Enter a check mark next to 5 GHz Name.....which will automatically add "5 GHz" to the network name....so you can identify it
Click Save, then click Update and wait a full minute for the Express to restart
Now you will need to "point" your 5 GHz capable devices at the 5 GHz network name. 2.4 GHz devices will connect to your "other" network name.

How do I merge two different libraries, linked to one account? They're on two different computers but I want them to be on one

How do I merge two different libraries, linked to one account? They're on two different computers but I want them to be on one

This should do the trick
Home Sharing Learn More
http://support.apple.com/kb/HT201976
Best of Luck

How do I use two different apple IDs on one itunes?

How do I use two different apple IDs on one itunes?

This would be a violation of the terms of use of the itunes store and could result in the loss of your account.
You cannot use the U.K. itunes store unless you are in the U.K

HT204053 How do I join two Apple ID purchases into One?

How do I join two Apple ID purchases into One?

You can't, accounts can't be merged nor content transferred from one account to another account - content will remain tied to the account that downloaded it.

Migration Jobs - two different SCCM sites into one

Similar Messages

Maybe you are looking for